Hardware & Tools Tenders in West Bengal

High End Desktop Computer, Colour Inkjet Printer, 1 KVA UPS, OFC, Thermoplastic Enclosures for OFC, Firewall, OTE, Subscriber connector to subscriber connector, Power plate Extension Board, SmartRack Enclosures, Subscriber connector to Ferrule connector, Fibers Distribution Frame, Unshielded twisted-pair cable, Register Jack 45 connectors

Engagement of licensed electrician and helper for round-the-clock operation and maintenance of complete electrical installations at KMC-SHARP office, Business Towers, Kolkata, for one year including tools and tackles.

Supply of tools with Tool Box consisting of the following item. 1) Digital Multimeter Tool box for cable jointer 1 No.2) Split fire OP kit consisting of a) Universal handle, b) Burner 8 Nos, c) Necktu

LV6 MT1 4910-003222 BLOCK WOOD 432MMX305MMX76MM, LV6 MT1 7920-001933 BRUSH CLEANING, LV6 MT1 3573 BRUSH ENGINE CLEANING, LV6 MT2 4910-000003 GAUGE TYRE PRESSURE MASTER TYPE 70KPA TO, LV6 MT3 6220-000197 LENS TAIL LIGHT GLASS, LV6-MT6 4720-015325 ... A12-21, Tool Kit 09471N12057 ... STOP, Tool Kit NCVD-X-4702011 ... SAE, Tool Kit CVD-F4735211 ... MM, Tool Kit NCVD- ... METRIC, Tool Kit CVD-X-4700111 ... METRIC, Tool Kit 4002000ST3400 ... 15, Tool Kit CVD-X- ... F1-5120-16001695, Tool Kit CVD-17082 ... JACK, Tool Kit BBD-5140-900-942-6898 ... BAG, Tool Kit F-4735500 ... METRIC, Tool Kit CVD-30166 ... SHACKLE, Tool Kit CVD-000 ... GUN, Tool Kit CVD-30166 ... BAR, Tool Kit CVD-F2341200 ... LAMP, Tool Kit CVD-30166 ... 1, Tool Kit CVD-L1- ... PUBLICATION, Tool Kit NCVD-X-1915215 ...

catenary dropper clip as per RDSO Drg.No. ETI/OHE/P/1192 [Rev. C] with complete fasteners. Make/Brand: RDSO approved vendors accepted only. ACCEPTED MAKE:Nike

Catenary Wire Ending Clamp Assembly, R.I. No. 1121, 1092 & 1094 (with fasteners) as per RDSOs Drg. NO. ETI/OHE/P/1120 Rev-B or latest.

SCREW 3/8-16 HS CAP as per Drg.No. 217911 ALT Ca specn: PURCHASE SPECIFICATION NO- MISC:479 Accepted make/Brand -Sundaram Fasteners (TVS Brand)

Clamp T- Bolt, Duct as per EMD Pt. No. 9548850 for Dust bin Blower Motor for Dust bin Blower Motor with necessary fasteners to clamp

36 mm Aluminium Bus Splice with clamping piece and Fasteners as per drg. No. ETI/PSI/P/6490 and RI NO.6491, 6482 latest Rev.

BIMETALLIC PARALLEL CLAMP ( 15 / 20 ) MADE OF ALUMINIUM ALLOY COMPLETE WITH FASTENERS CONFIRMING TO RDSO DRAWING NO .ETI / OHE / P / 1560 REV-D, ID-1561,

Resistance 160 ohm 100 watts with fasteners for HOBA circuit as per ICF Drg. No. ICF/SK-7-2-274 Make: Indigenous MAKE/BRAND: SE

Anchor Double Strap(5031) complete set with fasteners as described in RDSO Drg No. ETI/OHE/P/5030 (REV-C), STR NO.-CORE/STR/19.

Portable Fire Extinguishers (V2) ISI Marked to IS 15683 (Q2), GALVANIZED MILD STEEL FIRE BUCKET (Fire suppression hand tools) as per IS 2546 (Q3), Fire Beaters (Fire suppression hand tools) (Q3), Shovel Belcha as per IS 274 (Part 1, Part 2 and Part ... suppression hand tools )

Supply of Tools for MECHANIC DIESEL Trade.

Supply of Tools for DRAUGHTSMAN CIVIL Trade.

Supply of Tool kits among the Stakeholders of Uluberia-II Wig Mfg. REH and Industrial Co-operative Society Ltd. , Howrah

Cleaning & disinfection of overhead water storage tank, Supply of Hight adjustable ladder, drill tool kit, surging of existing bore well & providing and fixing of polyethylene cover and suitable locking arrangement on existing water storage tank etc. in Administrative Block, Hostel Block & Residential Quarters at SPM-NIWAS, Joka, Kolkata.

Periodic checking and cleaning of foreign materials from the inlet channel and sump chamber by engagement of specialized man power with proper safety equipments, tools and tackles at DLPS/S and D.

6199909183-INDUCTION HEATER TIH030 MAKE: SKF, 6160050304-BEARING FITTING TOOL KIT TMFT -36

Contact Wire Parallel Clamp (large) Part No. 1031-2 as per RDSO Drg. No. ETI/OHE/P/1030-2 Rev.-D with fasteners Make/Brand - "ERF'

Description: Stainless steel stud bolt size 10X35X30 MM complete parts confirming to RDSO specification no. TI/SPC/OHE/FASTENERS/0120 Rev-1 (March-2017) or latest.

Rubber Bush 10 x 15 x 6 mm Length , for Vande Bharat Seat and Luggage Rack . Concealing Fasteners , as Per Existing Sample on Vande Bharat Coaches.

Contact Wire Parallel Clamp Complete assembly with fasteners as per RDSO Drg No ETI/OHE/P/6170(Rev-C) & ID No 6171 or latest MAKE-SBI

SECTION INSULATOR ASSEMBLY (WITHOUT SECTION INSULATOR) COMPLETE WITH FASTENERS AS PER RDSO's SPEC. NO. ETI/OHE/27 (8/84) WITH A & C SLIP NO. 1 & 2 .

G.I. NUT BOLT, CHECK NUT AND FLAT WASHER SIZE 20X65X45 MM CONFIRMING TO RDSO SPECIFICATION NO. TI/SPC/OHE/Fasteners/0120Rev-1 (March- 2017) OR LATEST.

spares part of(fasteners) for wheel skate trolley set as per RDSO Drawing no.- SKVL-217 & 218 & Annexure-A Offered & Accepted Make: OWN MAKE/CIW BRAND

Reflective Vests, Reflective Luminous Garments High visibility warning garments with synthetic slide fasteners, Type of garment -Waist coat, Garment color - Fluorescent orange-red (for Essential Servi

SCREW 1/2-20 HS CAP as per Drg.No. 187697 ALT Ca specn: PURCHASE SPECIFICATION NO- MISC:479 MAKE-BRAND-TVS, OEM- M/S sUNDARAM FASTENERS

Parallel clamp (150/160) RI.No.1051-3 with Fasteners as per RDSO Drg. No. ETI/OHE/P/1050-3 Rev-A , Complete set. Accepted Make:- AAI

Parallel Clamp (150/105-150) complete with fasteners as per RDSO's Drg. No. - ETI/OHE/P/1050-2 Rev-D or latest. Accepted Make/Brand:- AEPL .

36MM Aluminium bus splice as per RDSO's Drg. No-ETI/PSI/P/6490, Rev.-B, 6491 & 6482 with fasteners. Make/Brand- SBI or KF or NMPL

S.S. BOLT, WITH NUT AND SPRING WASHER SIZE 10X30X30 MM CONFIRMING TO RDSO SPECIFICATION NO. TI/SPC/OHE/FASTENERS/0120 REV-1 (MARCH 2017) OR LATEST

S.S. Bolt with Nut and Spring Washer (Size 10X30X30 MM) confirming to RDSO specification No. TI/SPC/OHE/FASTENERS/0120 REV-1 (MARCH 2017) or latest.

G.I. nut & bolt with lock nut and flat washer size 16X360X100MM conforming to RDSO specification no. TI/SPC/OHE/Fasteners/0120Rev-1 (March- 2017) or latest.

G.I. NUT & BOLT WITH LOCK NUT AND FLAT WASHER SIZE 16X360X57MM COMPLETE AS PER RDSO SPEC NO. TI/SPC/OHE/FASTENERS/0120 REV. -1 (03/2017)

Catenary Wire Ending Clamp (65 sq. mm) Part No. 1121, 1092 & 1094, 261 with Fasteners Drg. No. ETI/OHP/P/1120. Rev-1. Make/Brand- self

Supply, Installation & Maintenance of Hardware items for Implementation of Audio & Video Solution (Q3)

Portable Bty Tester, Castor Camber Measuring tool, Belt Tension Tester, KPL Tester, Tool Kit

Optical Time Domain Reflectometer (OTDR), Electronic Welding (Soldering) Tool Kit, Fiber Optic Fusion Splicer

Driver TOOL KIT Consisting of 6 items for Electric Locomotives 1) Combination plier 165mm-01 no. 2) Screwdriver 6mm x 200mm -01No., 3) Ball pen hammer 500gm- 01No. 4) Chisels 22 x 200mm- 01 No, 5) Pipe wrench 350mm-01No, 6) Screwdriver 5 x 150mm-01No.: Make: Taparia or Equivalent

Fabrication galvanizing testing supply delivery including fasteners at site for the work of 132 KV structure for Ashokenagar 132 KV Sub station under Barasat Area Office WBSETCL

Fabrication galvanizing testing supply delivery including fasteners at site for the work of 132 KV structure for Basirhat 132 KV Sub station under Barasat Area Office WBSETCL

Fabrication, galvanizing, testing, supply and delivery at site of different Structures including fasteners for Subhasgram 220/132 KV Sub station under Kasba area office Substation of WBSETCL

36 mm Alluminium Bus Tee Connector with fasteners complete as per RDSOs Drg.No-ETI/PSI/P/6500, Rev-C,RI-6501 & 6482 or latest Accepted Make-SBI

MAST GUY ROD FITTING (WELDED) COMPLETE WITHOUT FASTENERS AS PER RDSO'S DRG.NO.ETI/OHE/P/3232,REV-C AND RDSO'S SPEC.NO-TI/SPC/OHE/FITTINGS/0130 (10/13).

36 mm Aluminium Bus Splice cum TEE Connector as per drg. No. ETI/PSI/P/6560, Rev-B and RI NO. 6561, 6482 and Fasteners latest Rev.

SECTION INSULATOR ASSEMBLY(WITHSECTION INSULATOR) COMPLETE WITH FASTENERS AS PER RDSO SPEC.NO. ETI/OHE/27(8/1984) WITH A&C SLIP NO. 1OR LATEST. MAKE: FIRMS OWN

GI NUT AND BOLT WITH LOCK NUT & FLAT WASHER SIZE 16X50X38 MM COMPLETE CONFIRMING TO RDSO SPECIFICATION NO. TI/SPC/OHE/FASTENERS/0120 REV. 1 OR LATEST.

Galvanized Steel Bolt with Nuts and L/Nuts 16x75x38mm as per RDSO Specn. No. TI/SPEC/OHE/FASTENERS/0120 REV-1 and Drg. No. ETI/C/0073.

Support clamp for contactor complete with fasteners as per Ref. Nos. 1 to 6 of CLW Drawing No. CLW/ES/SK-1/C44 ACCEPTED BRAND/MAKE: CU