Loading
Loading…
Loading…
2,068 results • Best match
LARGE SPAN WIRE ENDING CLAMP (130) COMPLETE WITH FASTENERS AS PER RDSO's DRG. NO. ETI/OHE/P/1140 REV. B OR LATEST AND RDSO SPEC. No. TI/SPC/OHE/Fittings/0130(10/13) Rev. 1 OR LATEST.
Set of Adjusting Pull Rods and fasteners consisting of the following items: i. Adjusting Pull Rod (As Machined) for 20T axle Bogies to DRG. No.ICF/SK3-3-2-002, Alt.-Nil, Qty.-2Nos./Set. ii. Hex. Head
LARGE SUSPENSION CLAMP (20 MM) COMPLETE WITH ALL ACCESSORIES AND FASTENERS AS PER RDSO'S DRG. NO.- ETI/OHE/P/1580 REV - F ( SHEET - 1) OR LATEST & RDSO SPECN. NO.- TI/SPC/OHE/FITTINGS/0130(10/13) Rev.
SUSPENSION CLAMP COMPLETE ASSEMBLY WITH LOCK PLATE AND ALL FASTENERS AS PER RDSO DRAWING NO. RE/33/P/1160 Rev-K ) AND RE/33/P/1163 Rev-D OR LATEST. Firms offer : SUSPENSION CLAMP COMPLETE ASSEMBLY W
Contact wire parallel clamp (large) (1031-2) complete set with fasteners Conforming with drawing no: ETI/OHE/P/1030-2(Rev-D) as per Specification number: TI/SPC/OHE/Fittings/0130-(10/13) Rev-1. Firm o
36 mm Alluminium Bus Tee Connector with fasteners complete as per RDSOs Drg.No- ETI/PSI/P/6500, Rev-C,RI-6501 & 6482 or latest Accepted Make-SBI, NMPL, KF, NIKE or any core approved make. Make SBI
Set of fasteners consisting 38 items i.e. bolts, screws and nuts used for FIAT bogies of LHB coaches. The material should be IS:1364-2002(P-1), ISO 4014-1999 Grade 10.9. Detailed description as per at
Terminal connector (19 mm) Multiple hole (Bolted Type) with Complete fasteners and assembly, RI No.1009 & 1009-1 as per RDSO Drg No. ETI/OHE/P/1009 Rev-A or latest. Make-CORE approved source. Make Bra
Supply of Contact wire parallel Clamp (small) (1041-2) complete set with fasteners, As per drawing no: ETI/OHE/P/1040/2/Rev-E. and Specification number: TI/SPC/OHE/Fittings/0130(10/13)-Rev-1 , Make:SB
Terminal connector (19 mm) Multiple hole (Bolted Type) with Complete fasteners and assembly, RI No. 1009 & 1009-1 as per RDSO Drg No. ETI/OHE/P/1009 Rev-A or latest. Make-CORE approved source only. AC
Large Catenary Suspension Bracket (2131 & 2132) complete set with fasteners As per RDSO'S Specn. No.-TI/SPC/OHE/FITTINGS/0130 (10/13) REV. 1 and RDSO's drawing No. ETI/OHE/P/2130 Rev-''B'' or Latest F
Supply of Contact wire parallel Clamp (small) (1041-2) complete set with fasteners, As per drawing no: ETI/OHE/P/1040/2/Rev-E. and Specification number: TI/SPC/OHE/Fittings/0130(10/13)-Rev-1 , Make:SB
GI BOLT SIZE 16x65x38 MM, WITH NUT, LOCK-NUT, 2 PLAIN WASHERS and 1 SPRING WASHER, CONFIRMING TO RDSO SPEC. No. TI/SPC/OHE /Fasteners/ 0120 Rev-1 (March- 2017) or Latest. Make- CORE approved source on
Stainless steel bolt (Size-10x65x30 mm) with nut & lock nut in assembled condition as per RDSO drawing No. ETI/OHE/0073 Mod-A conforming to RDSO Spec. No. TI/SPC/Fasteners/0120 [ MAR-13] Rev-1. Materi
Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118-3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Dr
Contact wire splice toothed type complete with fasteners, RI No. 1081-1, Spec: TI/SPC/OHE/Fittings/0130-10/13- Rev-1, Drawing No. ETI/OHE/P/1080-1, Rev-B, STR: CORE-STR-16 Rev-1.
Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118-3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Dr
GI BOLT SIZE 16x65x38 MM, WITH NUT, LOCK-NUT, 2 PLAIN WASHERS and 1 SPRING WASHER, CONFIRMING TO RDSO SPEC. No. TI/SPC/OHE /Fasteners/ 0120 Rev-1 (March- 2017) or Latest. Make- Core approved source on
High Tensile Stainless steel rustless U bolts, dia 10 mm with Nuts of RI No. 1162-S for single catenary suspension clamp as RDSO Specification No. TI/SPEC/OHE/Fasteners/0120 /Rev-1, Drawing No. ETI/OH
LARGE SPAN WIRE ENDING CLAMP (130) COMPLETE WITH FASTENERS AS PER RDSO's DRG. NO. ETI/OHE/P/1140 REV. B OR LATEST AND RDSO SPEC. No. TI/SPC/OHE/Fittings/0130(10/13) Rev. 1 OR LATEST.
Resistance 820 ohm 100 watts with fasteners for EFRA II & EML circuit as per KPA Drg. No. ER/KPA/EL/RE.3HE.2141Make: Indigenous or similar (Note: Material must be supplied as per IS mentioned in Dra
Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118-3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Dr
Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118-3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Dr
Contact Wire Ending clamp complete assembly, Clamp Body (Part No.1118-3), Wedge (Part No.1119-3) and Part no.263 with fasteners (Split pin & washer) suitable for 107 sq. mm Contact Wire as per RDSO Dr
Supply, Testing, Installation and Commissioning and Demonstration of Hand Tools, Instruments, Equipment and Machinery etc. for the course of Fitter Hydraulic and Pneumatic System.
SUPPLY OF SS FASTENERS FOR GRSE PROJECT-STOCK
Supply and installation, Testing and Commissioning of the tool kits and Machineries at the Kuapur Dr. B. R. Ambedkar Paper Plate and Cup Mfg. Cluster and REH Industrial Co-opt. Society Ltd.
Lifting of dismantled bellmouth with replacement of H.T nut - bolts, gasket etc , through checking and repairing as required and allied works with re-commissioning of 240 cusec capacity Pump Unit no I at DLPS
Bull Nose Oxygen Large, Nebulizer machine, Glucometer, I R Lamp, Dental Filling Tool Kit, Regulator Dental Chair, U V Tube 15W, pluse Oximeter
Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin-IS 12402 (Q3), Safety Equipment Tool Kit for Labours (Q3)
Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Office Space; L-002/HMU - Defect rectification of diagnostic tool kit; Service Provider
HIGH TENSILE RUST LESS [STAINLESS STEEL] U BOLT with NUT & LOCK NUT of DIA 10MM (R I No 6034S) as per RDSO Drawing No ETI/OHE/P/150 & RDSO SPEC No TI/SPC/OHE/Fasteners/0120/Rev-01
S.S. Bolt dia 12x45x30mm with Nut, P.B spring washer & 2 plain washer as per RDSO specification TI-SPEC-OHE-FASTENERS-0120-REV-1 or latest and RDSO Drg. No. ETI/C/0073, Mod-A, Make CORE approved sourc
Standard anti wind clamp complete with fasteners confirming to RDSO DRAWING NO. ETI/OHE/P/2550-1/2 Rev-L (R.I. no 2551-1, 2502, 2503) & ETI/OHE/P/2550-3 Rev-E (R.I. no 2504) or latest.
Contact wire parallel clamp small with fasteners RI part number 1041-2 as per RDSO specification number TI/SPC/OHE/Fittings/0130-10/13 Rev-1 and Drawing Number ETI/OHE/P/1040-2 Mod-E or latest.
Item Type: Item Description: Supply of Feeder Ending Clamp (150)(1131, 1102 & 1104) COMPLETE SET WITH FASTENERS AS PER Spec: TI/SPC/OHE/Fittings/0130-10/13-Rev-1, Drw: ETI OHE P 1130, STR: CORE-STR-16
S.S. U bolts dia 10 mm (RI 1162 S) with Nut and Copper Locking plate (RI 1163) for catenary suspension clamp, as per RDSO Specification No. TI/SPEC/OHE/Fasteners/0120 /Rev-1, RDSO Drawing No. ETI/OHE/
Contact wire ending Clamp (107)(wedge type) with ID No. 1118 & 1119 complete with fasteners as per RDSOs drg. No.ETI/OHE/P/1110-2, Rev 'D' & RDSO's SPEC. No.- TI/SPC/OHE/Fittings/0130 with A & C slip
Vestibule Bellow Complete (RH side) for Gangway of LHB type coaches as per ICF Drg.no.LWSCZAC-2-5-004, Alt-nil with set of bellow securing fasteners to item nos.8, 9 & 10 (Qty-04 sets) conforming to A
Standard anti wind clamp complete with fasteners confirming to RDSO DRAWING NO. ETI/OHE/P/2550-1/2 Rev-L (R.I. no 2551-1, 2502, 2503) & ETI/OHE/P/2550-3 Rev-E (R.I. no 2504) or latest.
Parallel clamp (RI no. 1031-3) complete with fasteners as per RDSO Drawing no. ETI/OHE/P/1030-3 Rev-A or latest and RDSO Specification no. TI/SPC/OHE/FITTINGS/0130 (10/13) Rev-1 or latest.
RIGID TYPE BIMETALLIC CONNECTOR SUITABLE FOR 50 MM DIA. ALUMINUM TUBULAR BUS BAR TO TERMINAL PAD OF 25 KV ISOLATOR/CT AS PER RDSO'S DRG. NO-ETI/PSI/P/11090 REV.-C, RI NO-11091 & 11092 WITH FASTENERS.
CATENARY WIRE ENDING CLAMP (65 SQ MM) PART NO 1121, 1092 AND 1094 WITH FASTENERS RDSO DRAWING NO. ETI/OHE/P/1120 REV-B OR LATEST. PROCUREMENT TO BE DONE ONLY FROM CORE APPROVED VENDORS. Firm offered m
Contact wire Parallel Clamp [small] with fasteners RI No. 1041-2, Specn. No. TI/SPC/OHE/Fittings/0130 with A & C slip No. 1 and Drg. No. ETI/OHE/P/1040-2 R E, STR: CORE-STR-16
36 mm ALUMINIUM BUS TEE TERMINAL COMPLETE WITH FASTENERS AS PER RDSO DRAWING NO. ETI/PSI/P/6510 REV.-D OR LATEST IDENTIFICATION NO. 6511 & 6482 AND RDSO SPEC. No. TI/SPC /OHE/Fittings/0130(10/13) REV.
Stainless steel nut and bolt 10X35X30 mm with hole as per RDSO spec. No TI/SPC/OHE/Fasteners/0120 Rev-1 and as per RDSO Drg No. ETI/C/0073 , RI No. 10/16 ACCEPTED MAKE/BRAND: RBE
Contact wire splice (toothed type) as per RDSO specification No TI/SPC/OHE/ Fittings/0130 (10/13) Rev 1 and drg No. ETI/OHE/ P/1080-1 Mod-B complete with fasteners. Firms Offer: Same as above. Make /
CONTACT WIRE PARALLEL CLAMP (LARGE) AS PER RDSO DRG No ETI/OHE/P/1030-2 REV-D. Firms offer: Contact Wire Parallel Clamp (Large) complete with GI Fasteners Bolt 16x50/38 with Nut and Spring Washer as p
PARALLEL GROOVE CLAMP(150/160) Complete with fasteners, As per RDSO's DRG NO: ETI/OHE/P/1050-3, REV-'A' & RDSO's Spec. No.-TI/SPC/OHE/FITTINGS/0130 with A&C Slip no. -1. Accepted Make/Brand:- AAI.
Contact Wire Parallel Clamp (Large) Complete with Fasteners as per RDSO Specification No. TI/SPC/OHE/Fittings/0130-10/13 Rev-1 and Drawing No. ETI/OHE/P/1030-2 Rev-D or latest. Make: RDSO/CORE Approve