Office Furniture Tenders in Himachal Pradesh

Almirah Steel (V2) (Q3), Side Table (Q3), Executive Table (V2) (Q3), Knotted Carpeting as per IS 14566 (Q3), Plastic Moulded Chair as per IS 13713 (V2) (Q3), Textile Floor Covering - Handmade Wool Carpet (V2) as per IS 5641 (Q3), Sofas (V2) (Q3), ... (Q3), Revolving Chair (V4) ...

Repair renovation of various Minister House under Division no.-III, Shimla (SH P. F office table PVC web chair, PVC table etc. at New Minister House No.-6 at Yates place and Oak over)

Secretariat Table 2350mm with 1200mm ERU Pedestal and Back, Secretariat Table 1800mm with 1200mm Pedestal and Back Unit, Secretariat Table 1650 mm x 900 mm with ERU and Pedestal, Secretariat Table 1350 mm x 750 mm, Table 1200 mm x 600 mm, Reception ... Secretariat, Revolving Chair Very ... Back, Revolving Chair High ... Back, Revolving Chair MID ... Back, Conference Table 15 ...

revolving chair Revolving Chair ( 19 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest BLUE, RED, black, brown - Ergonomic Seat Design true true, false Yes is better Back type push back push back, height adjustable backrest has false true, false 1/5 separate adjustable headrest Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover foam liminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 920 As per GeM Catalogue. Backrest Height ±15mm 460.0 As per GeM Catalogue. 3/5 Backrest Width ±10mm 410.0 As per GeM Catalogue. Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 400.0 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.5 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm, 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm, 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm, 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO 4/5 Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajeev Rajput 176206, Central University of Himachal Pradesh, Temporary Academic Block, Shahpur Chattri near Dramman, Distt. Kangra, H.P-176206 19 15

revolving chair Revolving Chair ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment false * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A * Ergonomic Seat Design true true Back type push back push back, 1/5 height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 3-Position Locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 2/5 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 * Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square N.A * 3/5 meter) DIMENSION Overall Chair Height ±15mm 1125 * Backrest Height ±15mm 800 800.0, 950.0 Backrest Width ±10mm 480 * Seat Height ±15 mm 480 420, 450, 480, 500, 520 Seat Width ±10 mm 520 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 715 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 60 * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 60 * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered NO YES, NO 4/5 product is ISO 18001:2007 certified Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vineeta Negi 175001, gandhibhavan 25 15

Almirah Steel (V2) (Q3), Revolving Chair (V2) (Q3), Steel Tables as per IS 8126 (Q3)

Metal Shelving Racks, Almirah Steel, Revolving Chair Average Turnover (Last 3 Years) 1 Lakh (s)

Conf Room Chair, Wooden Office Table Size 4 x 2 pt 5 Action Tesa, Wooden Office Table Size 5 x 2 pt 5 Action Tesa, Wooden Office Table Size 4 x 2 pt 5 Practical Board, Wooden Office Table Size 5 x 2 pt 5 Practical Board, Wooden Office Table Size 6 x 3 With Side Rack, Wooden Cushioned Chair for Office

revolving chair Revolving Chair ( 24 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment false * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest BLUE * Ergonomic Seat Design true true, false 1/5 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism false * Type of locking N.A * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 950 * Backrest Height ±15mm 430 * Backrest Width ±10mm 650 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 730 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 30 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO YES YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pintu Singh 172107, 17TH BN, ITBP, REKONG PEO DISTT KINNAUR 24 15

Faratha Fan, Steel Box, Office Chairs, Dustbin Wheel large, Stool for Office Runner

SPLIT AC HOT AND COLD, CARPET MEDIUM, PARTITION OF OPS ROOM, REVOLVING CHAIR, TEA CUP SET

Computer Table (V2) (Q2), Revolving Chair (V4) (Q2) MSE Exemption for Years of Experience and Turnover

CABIN WITH COMPUTER TABLE 17X5, EXECUTIVE CHAIR, EPSON PRINTER L3250, GPS, KINDLE BOQ Title MULTI BOQ

Stock storage under Jal Shakti Division Jubbal in Tehsil Jubbal Distt Shimla HP SH Plywood work for construction of wardrobe kitchen rack etc in JE residence Gumma and construction of office table and computer table at AE office room

Annual and maintenance to Various Non residential building under Shimla Division No. III (SH - Repair of Cup Board, office Table , Partition wall in the office building of Sub Division , Repair of Table of Engineer-in-Chief (Project) ACR Cell and Foo

Repair/renovation of residential buildings under Division No III Shimla. (SH - Providing Furniture i.e. Office Table (in set no. 310), Double Bed box(in set no. 203, 202, 406, 206), sofa 5-seater (in set no. 206 and 406), center table

Modification of Hall in Meeting Hall in Langar -Bhawan at Deotsidh District Hamirpur HP Conference Table, WPC wall panelling and ceiling etc

Executive Table ( PAC Only ) Executive Table ( 26 ) ( Under PAC ) Make godrejinterio Model godrejinteriotridentmiddlemaindeskwitheru Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided One side One side, Both side, No Storage Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle MDF board of grade SBG II of IS 1/6 board(Wood Product) of grade II type II of IS 12823/Latest 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot * 2/6 melt glue Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 19 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 19 * Length of table top ±10mm 1500 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 700 * Height of table ±10mm 750 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Single storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 450mm * Depth of storage unit in mm (±10mm) 1000 * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray N.A * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity N.A * fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * Average weight of telescopic channel N.A * 3/6 ±50Gms Keyboard front width±10mm N.A * Keyboard depth±10mm N.A * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray N.A * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade As per Buyer's choice * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification YES * OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * 4/6 OEM of offered product is ISO 18001:2007 certified YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA, 176310 1 60 2 Ratan Bahadur Giri 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala, 176215 5 60 3 Jagdish Sharma 171001, O/o District Treasury Officer, D.C. Office Complex, The Mall, Shimla, 171001 3 60 4 Surender Kumar Sharma 173212, Mini Secretariat, 173212 3 60 5 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, Changar Sector, Sadar Bilaspur, 174001 1 60 6 Rajinder Kumar 177001, District Treasury office Hamirpur, 177001 1 60 7 Sher Singh 175101, Dhalpur 5 60 8 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo, 172107 1 60 9 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall, 175001 3 60 10 Vishal Raghuwanshi 174303, District Treasury Office Una, Distt Una, HP 174303 1 60 11 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and 2 60 5/6 Lotteries, Block 23, SDA Complex, Kasumpti

Modular Work Stations (V3) (Q2), Revolving Chair (V5) (Q2), Wooden Shelf/Case/Rack/Credenza/Modular Storage (V2) (Q2)

Centre Table, Peg Table, Soft Board, Revolving Chair, Kero Heater, Foot Mats, Dustbin BOQ Title ACG BOQ 2

Executive Table ( PAC Only ) Executive Table ( 5 ) ( Under PAC ) Make godrejinterio Model godrejinterioascentexecutivetablewitheruandpe dstal Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided Both side One side, Both side, No Storage Keyboard tray Provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer MDF board of grade 1/6 prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot * 2/6 melt glue Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 38 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 5 * Length of table top ±10mm 1800 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 750 * Height of table ±10mm 775 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Four storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm N.A * Depth of storage unit in mm (±10mm) NA * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray Prelaminated particle board keyboard tray * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity underdesk keyboard arm * fixing of supporting bracket With telescopic * Length of telescopic channe±l0mm 200mm * 3/6 Average weight of telescopic channel ±50Gms 300Gms per set * Keyboard front width±10mm 600mm * Keyboard depth±10mm 350mm * Keyboard height±10mm 100mm * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm 19mm * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade Oak * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES * Product having BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * 4/6 OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 1 60 2 Ratan Bahadur Giri 176215, Dharamshala 1 60 3 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 4 Surender Kumar Sharma 173212, Mini Secretariat 1 60 5 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 1 60

Modular Table (Q3), Revolving Chair (V3) (Q2), Centre Table (Q3), Modular Side Storage Unit (Q3), Chair Office (V2) (Q3)

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Number of Auto Extension count 3 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6743056 Dated : 30-09-2025 Bid Document 1/5 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 45000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

revolving chair ( PAC Only ) Revolving Chair ( 361 ) ( Under PAC ) Make godrejinterio Model godrejinteriodiva7046rchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for black * 1/6 Seat and Backrest Ergonomic Seat Design false true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material aluminium covered with pu steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, 3/6 pure leather, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 950 * Backrest Height ±15mm 460 * Backrest Width ±10mm 410 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 420 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 715 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO NO YES, NO 4/6 9001:2015 certified OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 30 60 2 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 3 60 3 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 23 60 4 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 4 60 5 Ratan Bahadur Giri 176215, Dharamshala 65 60 6 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 16 60 7 Sher Singh 175101, Mini Secretariat, Dhalpur 26 60 8 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 48 60 9 Jagdish Sharma 171001, O/o District Treasury Officer, 61 60 5/6 The Mall, Shimla 10 Satish Kumar 173001, District Treasury Officer, Court Road, Near Agriculture Office, DRDA Building, Sirmaur at Nahan, Nahan 4 60 11 Surender Kumar Sharma 173212, Mini Secretariat 15 60 12 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 36 60 13 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 30 60

C/o, Building Portion Water Supply and Sanitary Installation, Site Development, Rain Harvesting Tank Boundary Wall and Supply of Office Tables

revolving chair ( PAC Only ) Revolving Chair ( 11 ) ( Under PAC ) Make godrejinterio Model godrejinterioversaneohighbackchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type Advance Bio Synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA 1/6 Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design false true, false Back type height adjustable push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type sliding fixed, sliding Seat is curved false * Locking mechanism true * Type of locking 5-Position Locking * Number of arm movement 4(up & down end left & right) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, 2/6 Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A 3/6 Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) Genuine leather of 0.8-1.0 mm thickness * DIMENSION Overall Chair Height ±15mm 1310 * Backrest Height ±15mm 730 * Backrest Width ±10mm 440 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 750 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO 4/6 OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 1 60 2 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 1 60 3 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 4 Sher Singh 175101, Mini Secretariat, Dhalpur 1 60 5 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 1 60 6 Surender Kumar Sharma 173212, Mini Secretariat 1 60 7 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 1 60 8 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 3 60 5/6 9 Gopi Chand 171009, Shimla 1 60

revolving chair ( PAC Only ) Revolving Chair ( 47 ) ( Under PAC ) Make godrejinterio Model godrejinteriobravohighbackchair Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for BLUE * 1/6 Seat and Backrest Ergonomic Seat Design true true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, 3/6 pure leather, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 550 * Backrest Width ±10mm 650 * Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 730 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 30 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO YES YES, NO 4/6 9001:2015 certified OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 2 60 2 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 1 60 3 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 1 60 4 Ratan Bahadur Giri 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 4 60 5 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 1 60 6 Sher Singh 175101, Mini Secretariat, Dhalpur 6 60 7 Surender Kumar Katoch 175001, District Treasury Office Mandi, Near Town Hall 10 60 8 Jagdish Sharma 171001, O/o District Treasury Officer, The Mall, Shimla 9 60 9 Surender Kumar Sharma 173212, Mini Secretariat 3 60 5/6 10 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 3 60 11 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 7 60

Meeting Table (Version 2) (Q3) ( PAC Only ), Revolving Chair (Version 2) (Q3) ( PAC Only ), Chair Office (Version 2) (Q3) ( PAC Only )

Emergent/Ugrent work with provision of Modular table , toughened glass , false ceiling, office table etc. as per approved design and pattren in 4th floor offices at Upper block , HQ ARTRAC , Shimla dg. 2025-26.Note:- The work site is highly secured under Army with controlled working time.

Impact Printer, Office Table, Epson Printer Multifunctioned Machine, Chair, Ruugedized Calibration Computer

Modular Table/Meeting Table/Centre Table (V2) (Q2), Office Chair (V3) (Q2)

Customized AMC/CMC for Pre-owned Products - Supplying Materials And Testing Ser Of Anganwadi Materials 1)Grain Storage Bins 9 Nos 2) Samrudhi Office Chair 6 Nos 3) Wall Mounted Watch 3 Nos As per List provided in Scope Of Work With One Year Service w..

TV 98 Inch, revolving chair, quotation board, oil fin heater, peg table, TV 43 inch, TV 55 inch BOQ Title TV BOQ

Executive Table (V4) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7120343 Dated : 17-01-2026 Bid Document 1/6 Number of Auto Extension count 3 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Executive Table ( PAC Only ) MSME Exemption For Years Of Experience And Turnover No Executive Table ( 135 ) ( Under PAC ) Make godrejinterio Model godrejinterioworkofficetable5026 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided One side One side, Both side, No Storage Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided 1/6 MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material NO LEGS Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with * 2/6 PVC tape of 2mm thick with the help of hot melt glue Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 25 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 25 * Length of table top ±10mm 1500 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 750 * Height of table ±10mm 750 * Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Single storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 450mm * Depth of storage unit in mm (±10mm) 600 * Height of smallest storage unit ±5mm 125mm * Height of medium storage unit ±5mm 175mm * Height of largest storage unit ±5mm 305mm * KEYBOARD TRAY Type of keyboard tray N.A * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity N.A * fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * 3/6 Average weight of telescopic channel ±50Gms N.A * Keyboard front width±10mm N.A * Keyboard depth±10mm N.A * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray N.A * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade Oak * WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * 4/6 OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tej Singh Khanna 176310, DISTRICT TREASURY CHAMBA 20 60 2 Rakesh Dharmani 174001, O/o District Treasury Office Bilaspur, D.C. Office Complex, Changar Sector, Sadar Bilaspur 3 60 3 Rajinder Kumar 177001, District Treasury office Hamirpur, D.C. Office complex 7 60 4 Sarwan Singh Guleria 176215, District Treasury Office, Near Police line, Hanuman Mandir, Dharamshala 2 60 5 Ratan Bahadur Giri 176215, Dharamshala 30 60 6 Sheetal Bragta 172107, Near D.C. Office, Kinnaur at Reckong Peo 10 60 7 Sher Singh 175101, Mini Secretariat, Dhalpur 7 60 8 Arvind Mohan Sharma 175001, District Treasury Office Mandi, Near Town Hall 1 60 9 Surender Kumar Katoch 175001, Near Town Hall 15 60 10 Jagdish Sharma 171001, O/o District Treasury Officer, The Mall, Shimla 9 60 11 Satish Kumar 173001, District Treasury Officer, Court Road, Near 4 60 5/6 Agriculture Office, DRDA Building, Sirmaur at Nahan, Nahan 12 Surender Kumar Sharma 173212, Mini Secretariat 12 60 13 Vishal Raghuwanshi 174303, District Treasury Office Una, Near Police Station, 12 60 14 Inderdeep Sharma 171009, Directorate of Treasuries, Accounts and Lotteries, Block 23, SDA Complex, Kasumpti, Shimla 3 60

instrument trolley for hospitals, medical stools or chairs, Almirah Steel, chairs-office, Public Place Seating Chair, Executive Table, Patient Bed (Fowler and Semi Fowler)

Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V4) (Q3), Computer Table (V2) (Q2), Revolving Chair (V5) (Q2), Chair (Without Wheels) for General Purpose (Q2)

Sofa (V3) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Executive Table (V4) (Q2), Revolving Chair (V5) (Q2), Chair for General Purpose (Q2), Steel Almirah Cabinets (V4) (Q2), Steel Bookcases conforming to IS 7761 (V2) (Q2), Computer Table (V3) (Q2), Metal Shelving Racks (Adjustable Type) conforming To Is 1883 (V2) (Q2), Waiting Area/Airport Terminal/Public Place/Reception area Chair or Seat (V2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Steel Tables as per IS 8126 (Q3) ( PAC Only ), Chair Office (V2) (Q3) ( PAC Only ), Revolving Chair (V2) (Q3) ( PAC Only ), Almirah Steel (V2) (Q3) ( PAC Only )

Writing Pad Chair (Q2), Executive Table (V3) (Q2), Wooden Shelf/Case/Rack/Credenza/Modular Storage (V2) (Q2), Steel Bookcases confirming to IS 7761 (V2) (Q2) (3 (3 ))

MATTRESS, D-FREEZER 500 LTR, REFRIGERTOR DOUBLE DOOR 260 LTR, WASHING MACHINE 9 KG, EXECUTIVE CHAIR, PAPER SHREDDER MACHINE, WALL LIGHT 9 WATT BOQ Title BOQ BID

Heat piller balco, Office chair, Hp cartridge 56a, Cartridge 30a & 32a, Epson ink 565, Epson ink 3110

Weight Scalling Machine, Flat Segregtion Converyor Balt, Fatka Machine, Sherdding Machine, Hydrolic Plastic Balling Machine, Tub 100L, PPE, FAN, PAN, 1.0 CUM Storage Containers, Computer, Printer, Inverter Battery, Fire Extinguisher, Office table, ... table, Office Chair , ...

Chair for General Purpose (Q2), Revolving Chair (V5) (Q2), Wooden Podium (Q3), Metal Shelving Racks (Adjustable Type) conforming To Is 1883 (V2) (Q2), Steel Almirah Cabinets (V4) (Q2) (3 (3 ))

Computer Table (V3) (Q2), Revolving Chair (V5) (Q2), Chair for General Purpose (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Wooden Shelf/Case/Rack/Credenza/Modular Storage (V2) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Metal Beds (V3) (Q2), Composite Office Tables conforming To Is 8126 (V2) (Q2) (3 (3 ))

Sofa (V3) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

office metal chair cushioned back and seat, office table, computer table, Steel Almirah 4 Feet, Steel Almirah 6 Feet BOQ Title 12345

Hot Heat Circulation Device 2000 watt, Wainscoting 12mm, Executive Office Table 4 x 6, White Bd 3 x 4, Notice Bd 2 x 3

Steel Clothes Lockers (V3) confirming to IS 3314 (Q2), Waiting Area/Airport Terminal/Public Place/Reception area Chair or Seat (V2) (Q2), Cafeteria Chair (Q2), Chair (Without Wheels) for General Purpose (Q2), Revolving Chair (V5) (Q2) (3 (3 ))