Office Furniture Tenders in Maharashtra

revolving chair MSME Exemption For Years Of Experience And Turnover Yes Revolving Chair ( 12 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * 1/5 Ergonomic Seat Design true true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm 2/5 Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 50 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite 3/5, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 1125 * Backrest Height ±15mm 570 * Backrest Width ±10mm 480 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.5 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 715 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO 4/5 OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manjiri Jayant Inamdar 400020, FIRST FLOOR OLD (GLO) BUILDING GENERAL BRANCH, WESTERN RAILWAY. CHURCHGATE MUMBAI-400020 12 30

revolving chair MSME Exemption For Years Of Experience And Turnover Yes Revolving Chair ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * 1/6 Ergonomic Seat Design true true, false Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm 2/6 Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite 3/6, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 1025 * Backrest Height ±15mm 570 * Backrest Width ±10mm 500 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 500 440, 520, 550, 460, 360 Seat Depth ±10 mm 500 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.5 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 580 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 2-year 2-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO 4/6 OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nitin Dinkar Pote 422004, Executive engineer chief gate erection unit no 5, Behind META office, Meri, dindori road, nashik 3 15

Restaurant Table ( PAC Only ), revolving chair ( PAC Only ), plastic moulded chair ( PAC Only ), chairs-office ( PAC Only ), sofas ( PAC Only )

Customized AMC/CMC for Pre-owned Products - Supplying Materials And Testing Ser Of Aarogya Upkendra materials1) Biomedicle waste Dustbin 2)Office Table 1 item 3)Degital BP Machine 1 Item 4) RO Purifier 1 Item As Per Scope Of Work With One Year Servic..

Wooden Shoe Rack, chairs-office, Modular Table, Executive Computer Table, Executive Table Bidder Turnover (Last 3 Years) 2 Lakh (s)

Plastic Moulded Chair as per IS 13713 (V2) (Q3), Executive Table (V2) (Q3), Computer Table (Q3), Almirah Steel (V2) (Q3)

Classroom Chairs (Q3), Chair Office (V2) (Q3), Executive Table (V2) (Q3), Plastic Moulded Chair as per IS 13713 (V2) (Q3)

Sound system set, Office table, Wheel chair, Regular chair, Office kapat

office cupboard, office table, chairs, HB Meter, BP Operator, Vajankata, Chatai

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience Yes Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Bidder Turnover, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5915320 Dated : 11-02-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Customized AMC/CMC for Pre-owned Products - Unbranded Executive Table of MDG board Of grade SBG II of IS 12406Latest 900 Milimeter 600 Millimeter 700 Milimeter naDMF; --; Annual Maintenance Contract (AMC); Not Applicable; Yes, Customized AMC/CMC for ... Unbranded Revolving Chair With ...

Computer Table, Office Steel Table, Executive Chair, S Type Chair, Almirah Capboard Small, Almirah Capboard Bid, Fiber Chair, Air Conditioner

Civil Work

Dressing Table (Q3), Metal Beds (V3) (Q2), Office Chair (V3) (Q2)

HIGH BACK CHAIR, OFFICE CHAIR, VISITOR CHAIR, Public Seating Chair, Installation

Procurement and supply of office furniture and other items for MNGL Ramanagara GA.

Supply of various materials for Office Furniture and Solar System at Chandori, Niphad

24B71C006 STEEL CUPBOARD (N0421-0003162), 24B71C006 CHEST MONEY COMBINATION AND 6 LEVER LOCK 28" X21" 16-5/8 (N0248-0001481), 24B71C006 FILING CABINET (N0421-0003135), 24B71C006 STEEL CUPBOARD WITH LOCKERS (N0421-0003163), 24B71C006 COMB BINDING MACHINE (N7440-P061350)

Steel tables, revolving chair, chairs-office Average Turnover (Last 3 Years) 6 Lakh (s) Experience with Government Required 3 Year (s)

Study Desk Table for Office, Ergonomic high back revolving chair, Non-revolving heavy duty chair, Portable Cellular handset, Polyster Roller Blind

Steel Tables ( PAC Only ), Restaurant Table ( PAC Only ), Plastic Moulded Chair ( PAC Only ), chairs-office ( PAC Only ), Revolving Chair ( PAC Only )

Wooden Almirah (Q3), Modular Side Storage Unit (Q3), Revolving Chair (Q3), Steel Bookcases-IS:7761 (Q3), Almirah Steel-IS:3312 (Q3)

Dust bin 120 liter, Water filter, School dress, Sanitary Napkin Vending Machine, Sanitay pad, Table, Revolving chair, Dust bin 10 liter

Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Steel Almirah/Cabinets conforming to IS 3312 (V4) (Q3)

Modular Work Stations, Almirah Steel-IS:3312, Chairs-Office- IS 3499, Revolving Chair Bidder Turnover (Last 3 Years) 6 Lakh (s)

Executive Table (V4) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Experience Criteria, Certificate (Requested in ATC), ... category Executive Table (V4) ...

King size Bed, Bed Side Table, Dressing Table with Drawers, Study Table, Study Chair, Centre Table, Sofa Two Seater, Cuggage Cum Shoe rack, Reception Table, Reception Chair, Dining Table 8 Seater, Dining Chair 8 Seater, Executive Table, Executive Chair,...

Card Room Chair (Q3), Plastic Moulded Chair as per IS 13713 (V2) (Q3), Almirah Steel (V2) (Q3), Executive Table (V2) (Q3)

Projector and White Projector screen, HP 11th Gen Intel Core i3-1115G4 8GB-512GB SSD-UHD Graphics-Windows 11 Home-MSO-FHD 39 6 cm 15 6 inch Natural silver, All in One Printer with Scanner, Bullet Camera, Pen Drive, Inverter Plus Battery, Office Chair, ... chair, Office Table

Revolving Chair (V4) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6494791 Dated : 25-07-2025 Bid Document 1/8 Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Experience Criteria, Past Performance, OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6889210 Dated : 17-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Past Performance 80 % Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Executive Table Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 1 Year (s) Executive Table ( 11 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Knocked Down To Be Assembled At Consignee Site By The Seller, Assembled Ready To Use Frame type Free standing - Understructure of table Gable end and modesty panel - Storage provided One side Both side, One side Keyboard tray Not provided Provided, Not provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS Three Layer prelaminated particles board(wood product) of grade II type III of IS 1/5 12823/Latest 12823/Latest Leg Material NO LEGS Teak wood, Carved teak wood, Other wood, NO LEGS MISC Table top long sides To be post form half round profile - Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Number of buffers provided N.A - DIMENSION Thickness of table top ±2mm 25 25.0 Thickness of gable end and modesty panel ±2mm 25 - Length of table top ±10mm 1800 1800.0 Depth of table ±10mm 850 850.0 Height of table ±10mm 750 - Dimension of leg(mmXmm) ±5mm No legs 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Single storage Single storage, Triple storage Width of storage unit ±10mm N.A - Depth of storage unit in mm (±10mm) NA - Height of smallest storage unit ±5mm N.A - Height of medium storage unit ±5mm N.A - Height of largest storage unit ±5mm N.A - KEYBOARD TRAY Type of keyboard tray N.A - Material of keyboard tray and Right angle L- type supporting bracket N.A - 2/5 Keyboard adjustablity N.A - fixing of supporting bracket N.A - Length of telescopic channe±l0mm N.A - Average weight of telescopic channel ±50Gms N.A - Keyboard front width±10mm N.A - Keyboard depth±10mm N.A - Keyboard height±10mm N.A - Finish of exposed edges of keyboard tray N.A - Material thickness of keyboard tray ±1mm N.A - FOOTREST Material of footrest N.A - Length of footrest ±10mm N.A - Depth of footrest ±10mm N.A - Height of footrest ±10mm N.A - Finish of exposed edges N.A - Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side - Table top shade As per Buyer's choice - WARRANTY Warrantee period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification NO - 3/5 OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shamkant Tukaram Shelke 440006, Hazari Pahad Road, Seminary Hills, Nagpur 11 15

DINING ROOM CHAIR, DINING ROOM CHAIRS, 8 SEATER DININGTABLE, SEMI EXECUTIVE CHAIRS FOR CONFERENCE HALL, SEMI EXECUTIVE CHAIR FOR CONFERENCE HALL

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from ... category Revolving Chair (V4) ...

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller OEM Authorization Certificate *In case any bidder is seeking exemption from ... category Revolving Chair (V4) ...

Steel Filing Cabinets for General Office Purpose (V2) as per IS 3313 (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number ( ) : GEM/2025/B/5855540 Dated : 04-02-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No Reserved for MSE Reserved for MSE Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Solar pannel system, Biometric, Regural chair, Office table, 32 Inch led tv

revolving chair Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 1 Year (s) Revolving Chair ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better 1/6 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/6 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/6 GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1220 As per GeM Catalogue. Backrest Height ±15mm 600 As per GeM Catalogue. Backrest Width ±10mm 550 As per GeM Catalogue. Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 18 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 680 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/6 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shamkant Tukaram Shelke 440006, Hazari Pahad Road, Seminary Hills, Nagpur 12 15

PROVIDING METAL ALMIRA SIZE 91 INTO 44 CM INTO 197 CM, SIPPLING OF LAPTOP PROVIDING, ALL IN ONE DESKTOP, PRINTER ALL IN ONE, MONO PRINTER, INVERTER WITH BATTERY, OFFICER TABLE, BIG WOODEN TABLE, OFFICER EXECUTIVE CHAIR, OFFICE CHAIR REVOLVING, DESERT COOLER 4 FT, PHOTO COPIER MACHINE, SLIDING SELF UNIT RECORD ALMIRAH, LED TV 43 INCH, CELLING FAN, WOOD CHAIR, WATER COOLER WITH RO

Single/Double Bed - Wooden - With/Without Box (Q3), Dining Tables (Q3), Cafeteria Chair (Q2), Textile Floor Covering - Handmade Wool Carpet (V2) as per IS 5641 (Q3), Steel Filing Cabinets for General Office Purpose (V2) as per IS 3313 (Q2)

Steel Tables as per IS 8126 (Q3), Computer Table (Q3), Revolving Chair (V2) (Q3), Chair Office (V2) (Q3), Almirah Steel (V2) (Q3)

Meeting Table, Plastic Moulded Chair, Steel Bookcases, Almirah Steel, Executive Computer Table, Revolving Chair Bidder Turnover (Last 3 Years) 3 Lakh (s)

Revolving Chair (V5) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6954619 Dated : 15-12-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6711402 Dated : 23-09-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6840954 Dated : 04-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

revolving chair Average Turn Over of Last 3 Years 1500000 Lakh (s) Experience with Gov. Required 3 Year (s) Revolving Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type fixed push back, height adjustable 1/5 Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking tilt limitor - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & adjustable integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 2/5 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square Genuine leather of 0.8-1.0 mm thickness - 3/5 meter) DIMENSION Overall Chair Height ±15mm 1220 As per GeM Catalogue. Backrest Height ±15mm 800 As per GeM Catalogue. Backrest Width ±10mm 520 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 480 420, 450, 520 Seat Width ±10 mm 480 440, 550, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.3 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 18 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 715 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 35 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO 4/5 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Railesh Sonker 428003, GARHA ROAD, SANJEEVANI NAGAR 15 15 Required No ePBG Required No

revolving chair Average Turn Over of Last 3 Years 02 Lakh (s) Experience with Gov. Required 2 Year (s) Revolving Chair ( 7 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest BLUE, RED, black, brown, cream, maroon, white * 1/6 Ergonomic Seat Design true true, false Back type fixed push back, height adjustable backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/6 GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 520.0 * Backrest Width ±10mm 480.0 * Seat Height ±15 mm 480 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480.0 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 35 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered NO YES, NO 4/6 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rohan Chandrakant Warekar 415612, Project Director, Project Implementation Unit - Ratnagiri, C/o National Highway Division, PWD, Jaisthambha Chowk, Near Shirke Petrol Pump, Ratnagiri -415612 7 15

Executive Computer Table (Q3) ( PAC Only ), Executive Table (V2) (Q3) ( PAC Only ), Revolving Chair (V3) (Q2) ( PAC Only ), Almirah Steel (V2) (Q3) ( PAC Only ), Credenzas (Q3) ( PAC Only ), Metal Beds (V2) (Q3) ( PAC Only ), Foam Mattress (V2) (Q2) ( PAC Only ), Metal Shelving Racks as per IS 1883 (Q3) ( PAC Only ), Sofas (V2) (Q3) ( PAC Only ), Meeting Table (V2) (Q3) ( PAC Only ), Restaurant Chair (Q3) ( PAC Only ), Public Place Seating Chair (Q3) ( PAC Only )

Fire Resisting (Insulating) Filing Cabinets (FRFC) as per IS 14561 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number : GEM/2025/B/6375745 Dated : 23-06-2025 Bid Document EMD Detail 1/5 Required No ePBG Detail Required No Splitting

Fire Resisting (Insulating) Filing Cabinets (FRFC) as per IS 14561 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number : GEM/2025/B/6365291 Dated : 20-06-2025 Bid Document EMD Detail 1/5 Required No ePBG Detail Required No Splitting