Office Furniture Tenders in Tamil Nadu

Steel Tables as per IS 8126 (Q3) ( PAC Only ), Chair Office (V2) (Q3) ( PAC Only ), Revolving Chair (V2) (Q3) ( PAC Only ), Almirah Steel (V2) (Q3) ( PAC Only )

Revolving Chair (V5) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7078451 Dated : 08-01-2026 Bid Document 1/8 Number of Auto Extension count 1 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 18 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : The President of India (Acting through the Regional Director, Purchase and stores)Directorate of Purchase and Stores, Department of Atomic Energy, Madras Regional Purchase Unit, DAE Nodal Facility Centre, Dr. Rajendra Prasad Road, Pallavaram, Chennai- 600 043 (.)

Writing Pad Chair (Q2), Executive Table (V3) (Q2), Wooden Shelf/Case/Rack/Credenza/Modular Storage (V2) (Q2), Steel Bookcases confirming to IS 7761 (V2) (Q2) (3 (3 ))

Modular Table (V2) (Q2) ( PAC Only ), High end Office Table/Desk Furniture Set/Suit (Q3) ( PAC Only )

Restaurant Table ( PAC Only ), Revolving Chair ( PAC Only ), medical stools or chairs ( PAC Only ), Modular Work Stations ( PAC Only ), Meeting Table ( PAC Only ) Experience Criteria 2 Year (s)

Modular Work Stations ( PAC Only ), Meeting Table ( PAC Only ), Almirah Steel ( PAC Only ), Public Place Seating Chair ( PAC Only ), Revolving Chair ( PAC Only ), Plastic Moulded Chair ( PAC Only )

Composite Office Tables confirming to IS 8126 (V2) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number : GEM/2025/B/6374751 Dated : 23-06-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V4) (Q2) ( PAC Only ) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Compliance of BoQ specification and supporting document *In case ... of Revolving Chair 1. ...

Indoor LED Video wall display size with brightness, Video Controller for LED main display, Mechanical frame and related civil work, Cables, HDMI, Splitter connectors and laying charges, Installation Charges, Conference Table Horse Show Shape

Sofa (V3) (Q2) ( PAC Only ), Modular Table/Meeting Table Centre Table (V2) (Q2) ( PAC Only ), Executive Table (V4) (Q2) ( PAC Only ), Revolving Chair (V5) (Q2) ( PAC Only ), Metal Storage Cabinet (Q2) ( PAC Only ), Metal Shelving Racks (Adjustable Type) conforming To Is 1883 (V2) (Q2) ( PAC Only ), Chair for General Purpose (Q2) ( PAC Only ), Metal Beds (V3) (Q2) ( PAC Only ), Bed Mattress Conforming to IS 13489 (V3) (Q2) ( PAC Only ), Steel Almirah/Cabinets (V4) (Q2) ( PAC Only ), Steel Cloth Lockers (V3) (Q2) ( PAC Only ) (3 (3 ))

Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5930430 Dated : 13-02-2025 Bid Document 1/7 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5982538 Dated : 26-02-2025 Bid Document 1/7 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Chair for General Purpose (Q2), Revolving Chair (V5) (Q2), Computer Table (V3) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Office Chair (V3) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6410793 Dated : 03-07-2025 Bid Document 1/8 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Executive Table (V3) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days Bid Number ( ) : GEM/2025/B/6046254 Dated : 02-04-2025 Bid Document 1/9 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Modular Extendable Conference Table (V2) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6725824 Dated : 25-09-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 3.00 ( ) Duration of ePBG required (Months). 14 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : SENIOR ACCOUNTS OFFICER ISRO Propulsion Complex Mahendragiri Tamilnadu, Department of Space, indian space research organization, Department of Space (Authimoola Perumal. N)

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6943124 Dated : 28-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 80000 Payment Timelines Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Water Dispenser, 20L Water Bottle, Gamla 18 Inches, Gamla 15 Inches, Revolving Chair, Paint Green, Paint Blue, Paint Red, Paint White, Peg Table, Cushion Cover for 5 Seater Sofa Set, Plastic Chair Cushioned

Office Chair (V3) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6458453 Dated : 17-07-2025 Bid Document 1/6 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Modular Seat and Desk Combo (for classroom/lecture hall) (Q3), Steel Tables as per IS 8126 (Q3), Office Chair (V3) (Q2)

Composite Office Tables conforming To Is 8126 (V2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2026/B/7108179 Dated : 13-01-2026 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

revolving chair Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 2 Year (s) Revolving Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 120 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable false 1/5 headrest Seat type fixed fixed Seat is curved false - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material steel covered with polyurethane steel covered with polyurethane seat material PU Foam covered with Fabric PU Foam covered with Fabric Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover 100% polyester fabric 100% polyester fabric Material of Fabric of Seat Cover 100% polyester fabric 100% polyester fabric GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 990 990 Backrest Height ±15mm 430 430.0 Backrest Width ±10mm 440 440.0 Seat Height ±15 mm 420 420 Seat Width ±10 mm 480 480 Seat Depth ±10 mm 480 480.0 Thickness of M S Plate Joining the under structure with Seat 2 2.0 Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm 25 mm Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm 25 mm 3/5 WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES Green guard certification YES YES Aiota - YES * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ELAKIYA A 600034, 34, HEPC BUILDING, CATHEDRAL GARDEN ROAD, NUNGAMBAKKAM CHENNAI 15 15 EMD Required No ePBG Required No

Composite Office Tables conforming To Is 8126 (V2) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7142083 Dated : 27-01-2026 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

chairs-office Chairs-office ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest false - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover N.A knitted with cane, leather foam, leather, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 18 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A 1/5 Frame Material CRCA ERW round pipe MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of Seat Cover fabric black leatherite, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) N.A - Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) N.A 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material polypropelene CRCA pipe, wooden teak, virgin plastic, fiber, chrome mild steel, NA, polyprope lene, polyurethane, Poly propelene on metal, Polyurethane on metal, wooden, Padded Cushion Upholsted With Leather On Metal, Padded Cushion Upholsted With Leather Leatherite On Metal, Polyurethane padded on Plastic Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 62 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 15 mm 15 mm, 60 mm, 75 mm, 80 mm 2/5 Shoe Type nylon rubber - DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 950 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 650 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 550 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 460 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 400 mm 350 mm, 480 mm Backrest Height ±10(mm) 500 mm 300 mm, 350 mm, 700 mm, 430 mm Arm Length ±5(mm) 350 mm 200 mm, 250 mm, 300 mm, 490 mm Arm Width ±2(mm) 40 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - 3/5 Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 R Mahendran 613005, Indian Institute of Food Processing Technology, Pudukkottai Road, Thanjavur - 613005 Near Air Force Station 25 15 EMD Required No ePBG Required No

Composite Office Tables confirming to IS 8126 (V2) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6481823 Dated : 31-07-2025 Bid Document 1/7 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Item 1 Modular workstation of 4 6 x 4 0, Item 2 Modualr workstation of 2 0 x 4 0, Item 3 Table top made up of 25 mm, Item 4 Corner stand 2 0 x 2 0x 7 0, Wardrobe 9 0 x 1 6 x 7 0

Arm Chair, Ergonomic or Revolving Chair, Almirah or Storewell 3 Door, Almirah or Storewell 2 Door, Four Door File or Book Case Cabinet, Side Rack 1875mm x 900mm x 300mm, Double Drawer Table Steel, Single Drawer Table Steel

Special Repairs to work station (24Nos, Recliner chair, side table with storage space and teepoy, revolving chair and table counter top glass to Director General of Audit Staff room at 6th floor, Perasiriyar K.Anbazhagan Maaligai at Nandhanam, Chenna

Steel Clothes Lockers (V3) confirming to IS 3314 (Q2), Waiting Area/Airport Terminal/Public Place/Reception area Chair or Seat (V2) (Q2), Cafeteria Chair (Q2), Chair (Without Wheels) for General Purpose (Q2), Revolving Chair (V5) (Q2) (3 (3 ))

Meeting Hall Chair, Executive long table for training hall, Executive Chair, Smart TV with Accessories, Audio Set with Portable set, Desktop computer, Air condition with accessories, UPS, LCD Projector, Screen, Laptop with Accessoires, Electrical wiring and fitting name board

Sofas (V2) (Q3), Revolving Chair (V4) (Q2), Office Chair (V3) (Q2), Cafeteria Chair (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization ... category Revolving Chair (V4) ...

Sofas (V2) (Q3) ( PAC Only ), Centre Table (Q3) ( PAC Only ), Executive Table (V2) (Q3) ( PAC Only ), Single Double Bed - Wooden - With/Without Box (Q3) ( PAC Only ), Foam Mattress (V2) (Q2) ( PAC Only ), Cafeteria Chair (Q2) ( PAC Only ), Pillows - Synthetic (Q3) ( PAC Only )

Desktop Computer (Q3), Laptop (Q3), UPS (Q3), Internet Security (Q3), Head Phone (Q3), EXternal Hard Disk (Q3), Web Camera (Q3), Pendrive (Q3), CCTV Camera (Q3), All In One Ink Tank Printer (Q3), S Type Chair (Q3), Computer Table (Q3), Executive Table...

PROVIDING ENTRANCE GATE AND SUPPLY AND DELIVERY OF DINNING TABLE, OFFICE TABLE, CHAIR, COT, BERO, ALUMINIUM COOKING VESSELS, GRINDER AND GAS STOVE AT MARRIAGE HALL IN S.KANNANUR TOWN PANCHAYAT

Providing Additional Civil Works including the Office Furniture arrangements for the New Construction of District Environmental Engineers Office Building Tiruppur South at S.F.No 285 3B, Sukkampalayam Village, Palladam Taluk in Tiruppur District

Steel Tables as per IS 8126 (Q3), Office Chair (V3) (Q2), Plastic Moulded Chair as per IS 13713 (V2) (Q3), Metal Shelving Racks as per IS 1883 (Q3), Classroom Tables (Q3)

Plastic Chairs For General Purposes conforming to IS 13713 (V3) (Q2) ( PAC Only ), Revolving Chair (V5) (Q2) ( PAC Only ), Modular Table/Meeting Table/Centre Table (V2) (Q2) ( PAC Only ) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Red Cushion Chair, Plastic Chair, Computer Chair, Revolving Chair, Visitor Chair, File Cabinet 04 Drawer Godrej, Steel Almirah 19Inch 36Inch 72 Inch, Wooden Table with in oblique out Tray, Fiber Table, Sofa 5 Seater with Centre Table teak wood, Peg Tables, Visitor chair with table teak wood

SANITARY PADS, Desk Bench, School Bag, Cement chair, Solar Street Light, Street light LED, Office Table, Almirah Steel, Weight Machine, Capsul Chair, Koti, Fiber Chair, Dari, E Rikshaw Garbage Gadi, Dust Bin

Conference Table, High back Executive Chair, Revolving Chair Mid Back, Visitor Chair, 98 inch Monitor Display, 55 inch Monitor Display, 23dot8 inch Interactive Display, Cable Cubby, USB A B, HDMI Ultra 9, USB C 6, Collaboration Switching System, HDMI Twisted Pair Transmitter, HDMI Twisted Pair Receiver, HDMI Matrix Switcher, Two and Four Input USB Switchers, AI AutoTracking 4K PTZ Camera, Matrix Tracking Box, 12 by 8 DSP with AEC and Dante, Audio Power Amplifier, 6 dot 5 inch Two-Way Ceiling Speaker, Column Array Speaker, Ceiling Microphone Array, Ceiling Microphone Suspension Kit, Network Switch, Control Processor, Touch Panel Control Interface, Ultra Flexible Premium High Speed HDMI Cable, USB 3 dot 0 Active Extension Cable, USB 3 dot 0 A Male to B Male Cable, USB 2 dot 0 Active Extender Cable, SuperSpeed USB 3 dot 0 Type A to Type B Cable, USB Type A to USB Mini-B Cable, Speaker Cable, Dual Shielded Twisted Pair Control Cable, Shielded Twisted Pair Cable, Shielded RJ45 Plug Kit, UnderDesk Mount Clip, UnderDesk Mounting Bracket, 21U Custom Equipment Rack, 6 KVA UPS, Power Cable, MCB Distribution Box, 16A MCB, 6A MCB, Plug Tops, 5A Power Supply Sockets, SITC and End to End testing of entire project, Documentation and Training, CAMC for First year, CAMC for Second year

Modular Table (V2) (Q2) ( PAC Only ), Bed Side Table (Q3) ( PAC Only ), Cafeteria Chair (Q2) ( PAC Only ), Sofas (V2) (Q3) ( PAC Only ), Revolving Chair (V4) (Q2) ( PAC Only ), Wooden Almirah/Wardrobe (V2) (Q2) ( PAC Only ), Dressing Table (Q3) ( PAC Only ) MSE Exemption for Years of Experience and Turnover

Blazer Cloth with Regimental Crest 7 x 5, Dust Bin Stainless Steel, Dust Bin Plastic, Office Table Glass 4 x 2, Foot Mat WELCOME, Measuring Tape 100 Mtr, COAS Direction Frame to IA Soldiers Frame, Technical Absorption to IA Soldiers Frame

Computer Chair, Book Shelf, Study Chair, Wet Grinder, Inveter Battert, Inveter Machine, Paper Reading Stand, 500 Watts High Power PA Amplifier, Speaker System 250 w, Speaker System 30w, Wireless Microphone, Floor Standing Ac, Almira, Revolving Chair With Arm Push Back, Generator, CC TV, Solar Battery With Battery Box, Shoes Stand, Dining Table Without Tope, Dining Bench BOQ Title BOQ Emergency

2 SEATER MILD STEEL DUAL DESK OF SIZES AS PER DRAWING AND TECHNICAL SPECIFICATION, 3 SEATER MILD STEEL DUAL DESK OF SIZES AS PER DRAWING AND TECHNICAL SPECIFICATION, OFFICE TABLE WITH SIZES AS PER TECHNICAL SPECIFICATION, STEEL CHAIR WITH SIZES AS PER TECHNICAL SPECIFICATION

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/5882904 Dated : 30-01-2025 Bid Document 1/6 EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Computer Cabinet Table set with three side table top partition, height of partition 2.2 ft (size of, Fabrication of office table (size 6.3 ft x 4.2 ft) job including one side partition (Height of the p, Parttion between office space and storage area including glass door, size of the partition 22.6 ft x

Lever Arch File (Q4), Envelopes as per IS:13892 (Q4), Solar Street Light Luminaire (Q3), stapler pin (Q4), pins or tacks as per IS: 5653 (Q4), battery cell as per IS:9128 and IS:8144 (Q4), Revolving Chair (Q3), Panel Light Bulb-IS 1601 (Q3), domestic drinking glasses (Q3), Hemoglobinometer (Point-of -care) (Q3), Tea set (Q4), Hdpe Pipes For Water Supply-IS 4984 (Q4), Belt Drive Water Pump (Q3), Diagnostic Otoscope Rechargeable (Q3), Urine Test Strips (Q3)

Injection Pallet 3ftx3.5ft, Digital Weighing Machinen 350 Kg, 9 Fin Oil Filled Radiator Heater, Fire Extinguisher Ball, Red Dak Folder, Table Lamp for Office, Table Glass, Coir Foot Mat, Carpet2ft x 3.5ft, Automatic Room Freshener Spray Machine, Crystal Glass, Running Red Mat 4.5mtr x 1.5mtr, Acrylic Desk Name Plate Holder Big, Blazer Cloth with Regimental Crest Green

table executive officers of size 2000 1000 770with side table of 450 600 675 and mobile pedestral drawer of size 450 600 675, table executive officers of size 1800 900 780 with side table of1200 565 690 and mobile pedestral drawer of size 450 600 ... 600, executive chair officers ...