Office Furniture Tenders in Uttar Pradesh

Modular Extendable Conference Table (V2) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6599690 Dated : 26-08-2025 Bid Document 1/11 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority HAL (QC) Auto CRAC Days 60 Evaluation Method Total value wise evaluation Arbitration Clause Yes ( Arbitration clause document ) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 Arbitration should not be routinely included in contracts Mediation Clause Yes ( Mediation clause document ) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 mediation clause should not be routinely included in contracts and pre- litigation mediation can be taken up without any such clause also Bid Details EMD Detail Required No ePBG Detail Required No Splitting 2/11

Executive Table (V3) (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6701266 Dated : 26-09-2025 Bid Document 1/7 Number of Auto Extension count 1 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

White Table Cloth, Regimental Bedsheet, Dessert Cooler, White Board with Stand, Office Table

revolving chair ( PAC Only ) Experience with Gov. Required 2 Year (s) Revolving Chair ( 4 ) ( Under PAC ) Make godrejinterio Model godrejleomahighback Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support 1/5 Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest true true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 4-Position Locking * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 2/5 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material aluminium covered with pu steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A 3/5 Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * DIMENSION Overall Chair Height ±15mm 1310 * Backrest Height ±15mm 600 * Backrest Width ±10mm 480 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 500 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 750 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO 4/5 OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ajay Luhach 281005, Mathura Refinery Indian Oil Corporation 4 15

Revolving Chair (V5) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2026/B/7067592 Dated : 03-01-2026 Bid Document 1/7 Number of Auto Extension count 2 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Past Performance, Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6539110 Dated : 14-08-2025 Bid Document 1/7, -- Number of days for which Bid would be auto -- extended 7 Past Performance 10 % Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Revolving Chair (V4) (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Past Performance, Certificate (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6539070 Dated : 14-08-2025 Bid Document 1/7, -- Number of days for which Bid would be auto -- extended 7 Past Performance 10 % Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Modular Work Station, Multimedia Projector, Laser Pointer, Computer Revolving Chair, Wall Mounted Fan, Hot and Cold Water Dispenser, 2KVA Online UPS with Battery

Metal Storage Cabinet (Q2), Modular Work Stations (V3) (Q2), Revolving Chair (V5) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2) (3 (3 ))

Chair Office (V2) (Q3), Steel Tables as per IS 8126 (Q3), Executive Computer Table (Q3), Almirah Steel (V2) (Q3), Revolving Chair (V2) (Q3)

Electric Air Blower, Postal Bag, Lamination Machine, Carpet, Wall Clock Digital, VIp pen Stand, Paper Shredder, Door Bell, Revolving Chair, Spiral Binding Machine

Sofa 8 seater, Double Bed, Sofa cum Bed, Mattress Extra Comfort, In Out Tray Acrylic, Revolving Chair BOQ Title In out Tray BOQ

Steel Tables, Almirah Steel-IS:3312, Chairs-Office- IS 3499, Revolving Chair, Executive Computer Table Bidder Turnover (Last 3 Years) 1 Lakh (s)

Desk and Bench Set for Classroom/Training Area (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2) (3 (3 ))

Modular Table/Meeting Table/Centre Table (V2) (Q2), Chair for General Purpose (Q2), Computer Table (V3) (Q2), Revolving Chair (V5) (Q2) (3 (3 ))

BIOMEDICAL WASTE MANAGEMENT SYSTEM, STEEL ALMIRAH, TABLE, OFFICE CHAIR WITH HANDLES, PATIENT STOOL

BIOMEDICAL WASTE MANAGEMENT SYSTEM, STEEL ALMIRAH, TABLE, OFFICE CHAIR WITH HANDLES, PATIENT STOOL

Classroom Desking and Seating (V2) (Q3), Wooden Podium (Q3), Office Chair (V3) (Q2)

WEIGHT SCALLING MACHINE, FATKA MACHINE, Flat Segregation Conveyer Belt, Hydraulic Plastic Ballaing Machine, Singal Shaft Shredder For Municipal Solid Waste, Tub 100L, PPE Kit, Fan, Pan, 1.0 cum storage containers, Computer, Printer, Invertor with ... Extinguisher, Office table , ... table, Office Chair , ...

revolving chair Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 1 Year (s) Revolving Chair ( 13 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better Back type push back push back, height adjustable 1/6 Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest true true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism false - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden 2/6 Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 50 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - 3/6 DIMENSION Overall Chair Height ±15mm 1180 As per GeM Catalogue. Backrest Height ±15mm 570 As per GeM Catalogue. Backrest Width ±10mm 550 As per GeM Catalogue. Seat Height ±15 mm 500 420, 450, 480, 500, 520 Seat Width ±10 mm 520 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.6 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 580 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO YES YES, NO 4/6 18001:2007 certified Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr. Deepti Jain 208010, ESIC HOSPITAL, Near Siddhnath Ghat, Tannery Town, Jajmau, Kanpur. 13 15

Computer Chair Revolving, Chair Revolving MB, Tile Based Workstation, Premium Leatherette Chair HB, Chair Revolving HB, Table computer, Chair Revolving with Neck Rest HB

Modular Work Stations (V3) (Q2), Revolving Chair (V5) (Q2), Modular Table/Meeting Table/Centre Table (V2) (Q2), Chair for General Purpose (Q2) (3 (3 ))

Chair for General Purpose (Q2), Revolving Chair (V5) (Q2), Computer Table (V3) (Q2), Steel Almirah/Cabinets conforming to IS 3312 (V4) (Q3) ( ( 3 3 ))

Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Chair (Without Wheels) for General Purpose (Q2), Sofa (V3) (Q2) (3 (3 ))

Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Chair for General Purpose (Q2), Steel Almirah/Cabinets (V4) (Q2) (3 (3 ))

Sofa (V3) (Q2), Sofa Set or Couch (Handicraft) (V2) (Q3), Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2) (3 (3 ))

Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Chair for General Purpose (Q2), Steel Almirah/Cabinets (V4) (Q2) (3 (3 ))

REVOLVING CHAIR FOR TRG CLASS, CP TABLE SMALL FOR TRG CLASS, CP TABLE LARGE FOR TRG CLASS, STEEL SCALE 30CM, EXTENSION BOARD 15 AMP

Modular Table/Meeting Table/Centre Table (V2) (Q2), Revolving Chair (V5) (Q2), Steel Almirah/Cabinets (V4) (Q2), Chair for General Purpose (Q2) (3 (3 ))

Revolving Chair (V4) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6571582 Dated : 18-08-2025 Bid Document 1/9 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Pre Dispatch Name of the Empanelled Inspection Agency/Authority RITES Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 70600 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 12 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : 2/9 Sr.DFM/Prayagraj D.R.M. Office, Civil Lines, Prayagraj - 211001 (Sr.dfm/prayagraj) Splitting

Steel Tables-IS: 8126 (Q3), Executive Table (Q3), Chairs- Office- IS 3499 (Q3), Plastic Moulded Chair-Is 13713 Rev 1 (Q3), Meeting Table (Q3)

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6939893 Dated : 27-11-2025 Bid Document 1/9 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 30 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6940858 Dated : 28-11-2025 Bid Document 1/9 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 45 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Revolving Chair (V5) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6940765 Dated : 28-11-2025 Bid Document 1/9 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 45 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Classroom Desking and Seating (V2) (Q3), Executive Computer Table (Q3), Office Chair (V3) (Q2)

Chair for General Purpose (Q2), Composite Office Tables conforming To Is 8126 (V2) (Q2), Steel Almirah/Cabinets (V4) (Q3), Computer Table (V3) (Q2) (3 (3 ))

Desk and Bench Set for Classroom/Training Area (Q2), Chair for General Purpose (Q2), Composite Office Tables conforming To Is 8126 (V2) (Q2) (3 (3 ))

cooler stand, glass with vinyl print, led light 30watt, acrylic plates, cooler repair, executive chair, visitor chair, flood light 50watt, phones, bondite, name plate

KURSI (Q3), OFFICE EXECUTIVE CHAIR (Q3), TABLE (Q3), KURSI FIBER (Q3), IRON ALMIRAH (Q3), 25 KVA GENERATOR (Q3), 1.5 TON 5 STAR AC (Q3)

Repair and Overhauling Service - Repair/replacement of red chair, water dispenser and office chair as per key specification; Repair/replacement of red chair, water dispenser and office chair as per key specification; Yes; Buyer Premises

Executive Computer Table, Almirah Steel, Public Place Seating Chair, Revolving Chair, Centre Table, Sofa Set (Steel Tube), Sofas Experience with Government Required 10 Year (s)

Metal Beds (V3), Modular Table/Meeting Table/Centre Table (V2), Revolving Chair (V5), Chair for General Purpose, Cushioned Easy Chair Wooden, FMN SET FD 220

Desktop Computers, Multifunction Machines MFM, Uninterruptible power supply (UPS), Executive Computer Table, Revolving Chair, electrical box extension Bidder Turnover (Last 3 Years) 2 Lakh (s)

Chair for General Purpose (Q2), Revolving Chair (V5) (Q2) MSE Relaxation for Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

Weighning Machine (Q3), Flat Segregation Conveyor Belt (Q3), Fatka Machine (Q3), Shredding Machine (Q3), Hydraulic Machine Bale Press Machine (Q3), TUB 100L (Q3), PPE KIT (Q3), Fan (Q3), Pan (Q3), 1.0 CUM Storage containers (Q3), Computer (Q3), ... (Q3), Office Table (Q3), ... (Q3), Office Chair (Q3), ...

Weight Scalling Machine (Q3), Cupboard/Almirah (Q3), Flat Seregation Conveyor Belt (Q3), CCTV Camera set (Q3), Fatka Machine (Q3), Shredder Single Soft (Q3), Hydraulic Plastic Balling Machine (Q3), Tube (Q3), PPE Kit (Q3), Fan (Q3), Pan (Q3), Storage ... (Q3), Office Table (Q3), ... (Q3), Office Chair (Q3)

Weighing Machine (Q3), Flat Segregation conveyor Belt (Q3), Fatka Machine (Q3), Shredding Machine (Q3), Hydraulic Bale Press Machine (Q3), TUB 100L (Q3), PPE (Q3), FAN (Q3), Pan (Q3), 1.0 CUM STORAGE CONTAINERS (Q3), COMPUTER (Q3), PRINTER (Q3), ... (Q3), OFFICE TABLE (Q3), ... (Q3), OFFICE CHAIR (Q3), ...

WEIGHT SCALING MACHINE, STORAGE RACK IRON, FLAT SEGREGATION CONVEYOR BELT, CUPBOARD, FATKA MACHINE, HYDRAULIC PLASTIC BAILING MACHINE, SINGLE SHAFT SHREDDER, TUB, PPE KIT ( 8 set ), FAN, CCTV SET WITH 4 CAMERA 1 MONITOR, CABLE AND TOOL KIT ( 2 set ), ... ), OFFICE TABLE , ... TABLE, OFFICE CHAIR

WEIGHT SCALLING MACHINE (Q3), FLAT SEGREGATION CONVEYOR BELT (Q3), FATKA MACHINE (Q3), SHREDDING MACHINE (Q3), HYDRAULIC BALE PRESS MACHINE (Q3), TUB 100L (Q3), PPE (Q3), FAN (Q3), PAN (Q3), 1.0 CUM STORAGE CONTAINERS (Q3), COMPUTER (Q3), PRINTER ... (Q3), OFFICE TABLE (Q3), ... (Q3), OFFICE CHAIR (Q3), ...

Brown Paper, Colour Pencil, Water Colour, Elastic 2.5mm, Elastic 6mm, Eye Hook, Fancy Button, Plain Button, Milton Chalk, Sewing Machine Oil, Sunmica Sheet 10x12, Sunmica Sheet 4x7, Sunmica Sheet 6x8, Four Fold File Cover, Envelope Small, Executive Table ... PPL, Executive Chair For ...