Loading…
Loading…
410 results • Best match
Second Hand Empty Gunny Bags(V2) (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6465356 Dated : 17-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 216000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Second Hand Empty Gunny Bags(V2) (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6450941 Dated : 14-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 480000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Second Hand Empty Gunny Bags(V2) (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6505369 Dated : 28-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 200000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Second Hand Empty Gunny Bags(V2) (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6948304 Dated : 29-11-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 500000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No
Second Hand Empty Gunny Bags(V2) (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6831008 Dated : 28-10-2025 Bid Document 1/6 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No
Coal sample collection, preparation with packaging and transportation from Different Mines of korba Area i.e. DSB Sub Area, Manikpur , Saraipali, SRK and Rajgamar Sub Area to Area coal analysis Lab Balgi, Korba Area
Tie coat as per RDSO spec. No. M&C/PCN/114/2020 (Tie coat should be water based as per the above specification). Packaging should be in 20 L container. Colour shade-White.
TTie coat as per RDSO spec. No. M&C/PCN/114/2020 (Tie coat should be water based as per the above specification). Packaging should be in 20 L container. Colour shade-White.
Tie coat as per RDSO spec. No. M&C/PCN/114/2020 (Tie coat should be water based as per the above specification). Packaging should be in 20 L container. Colour shade-White.
ROBERT BOSCH POWER TOOLS, DISC CUTTER 14"(355mm) or similar , DISC DIA 355mm, DISC BORE DIA 25.4mm, DISC THICKNESS 3.0mm FOR CUTTING S.S. SEAMLESS PIPE. PACKAGING QTY. OF 20 NOS. IN A SET., Make: BOSC
Printed BOPP Laminated HDPE Bags (Woven Sack) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/7032624 Dated : 22-12-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 50000 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : DMO Sunday Market, Beside of Gramin Bank, Raigarh(CG) (District Marketing Officer)
Printed BOPP Laminated HDPE Bags (Woven Sack) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2026/B/7088015 Dated : 08-01-2026 Bid Document 1/6, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 5000000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 200000 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : DMO ROOM NO 89, 90, 91, 92 COMPOSITE COLLECTORATE BUILDING BALOD (Sourabh Bhardwaj) 2/6
Printed BOPP Laminated HDPE Bags (Woven Sack) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2026/B/7118370 Dated : 19-01-2026 Bid Document 1/6, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 2500000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 125000 ePBG Detail Required No (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : DMO Chhattisgarh State Co-operative Marketing Federation Ltd. Room No. 09 Composite Building, Collectorate Parisar Rajnandgaon (C.G.) Pin - 491441 (Dmo) 2/6
Supply of Water Resistant Carry Bags, Foldable Writing Boards with Binder Clips, Note-Pad, Cap, I-Card with Lanyard and other Kit items
Custom Bid for Services - LOADING AND UNITIZATION OPERATION OF HR COILS PLATE SHEET INCLUDING PREPARATORY WORK AND YARD MANAGEMENT OF HR COILS PLATE SHEET YARD AND PACKAGING OF HR COILS PLATE SHEET PACKETS IN RAKE AND TRAILER FOR DISPATCH Similar Category Goods Transport Service – Per MT per KM Based Service
Custom Bid for Services - Contract for pallet packing of finished refractories Bricks (Item-I, II & III) Similar Category Goods Transport Services - Packaging
alumino ferric Alumino Ferric ( 25000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES * ISI Marked false true, false ... value Packing Material HDPE BAGS * ...
Urine Drug Screen Kit with Drug Test Dip Card, Surgical Gloves, Face Mask, Aluminium Foil Silver Disposable Food Packaging Container 250 ml, Disposable Cup 150ml, Disposable Glass 300 ml, Disposable Paper Plate, Repair of Zig Zag Balance Bar
Staplers (V2) (Q3), Markers for White Board (V2) (Q4), binding punch machine (Q3), stamp pads (Q4), Correspondence Envelopes (V3) Conforming to IS 13892 (Q4), Paper weights (Q4), Pins, Paper, Straight as per IS 5653 (Q4), Permanent Marker Pen (Q4), ... (Q4), Packaging Tape
alumino ferric Average Turn Over of Last 3 Years 40 Lakh (s) Experience with Gov. Required 3 Year (s) Alumino Ferric ( 100000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values ... 20.0 Packing Material LOOSE ...
toilet cleaners liquid Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 15 Year (s) Toilet Cleaners Liquid ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values Colour and Fragrance ... Packing Packing Material plastic ...
handloom cotton gauze Handloom Cotton Gauze ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS: 758 - 1988 (Latest) * DIMENSIONS & ... suitable packing material ) ...
Cleaning cum De stoner cum Grader, De huller, Grader cum Aspirator OR Gravity Separator, conical Roaster, Ribbon Blender, Packaging Machine Big, Weighing Balance and foof testing kit, Packing Line Band Sealer, Tray Dryer, Metal Detector, Vibro Shifter, Peeling Machine, Wet Grinder, Vacuum Packing machine, Electric Oven with Accessories, Dough mixer Planetary mixer, Chhikki SS Plate
File/Folder (V3) (Q4), Packaging Tape (Q4), Glue Stick (V2) (Q4), Black Lead Pencils (V2) as per IS 1375 (Q4), Carbon Papers as per IS 1551 (Q4), Permanent Marker Pen (Q4), Ball Point Pens (V2) as per IS 3705 (Q4), Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4), Pen Stand (V2) (Q4) MSE Exemption for Years of Experience and Turnover
sodium hydroxide Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 5 Year (s) Sodium Hydroxide ( 55000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian ... Lined Gunny Bag , ...
anti set off spray powder Anti Set Off Spray Powder ( 21200 ) Technical Specifications Specification Specification Name Values Allowed Values Material Product base Made from other Material Made from Natural Starch, Made from other Material Base ... Packing Packing Material 25KG ...
Plain Copier Paper (V2) as per IS 14490 (Q4), Box File (Q4), Self Adhesive Flags (V2) (Q4), Permanent Marker Pen (Q4), Transparent Tape (V2) (Q4), Packaging Tape (Q4), Cartridge (Drawing) Paper as per IS 1848 (Part 2) (Q4), Correspondence Envelopes (V2) (Q4), Ball Point Pens (V2) as per IS 3705 (Q4), Glue Stick (V2) (Q4), Gel Pen (V3) (Q4), Ink Refills (V2) (Q4), rubber bands (Q4), Diaries Printed - Plain - Register (Q4), Stapler Pin/Staples (V2) (Q4), Metric Steel Scales (V2) as per IS 1481 (Q4), Stamp - Pad Ink as per IS 393 (Q4), Tags for Files (V2) as per IS 8499 (Q4)
alumino ferric Alumino Ferric ( 15000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked false BIS Licence Number NA - Test Report Details ... 20 Packing Material 20 ...
anti set off spray powder Anti Set Off Spray Powder ( 21200 ) Technical Specifications Specification Specification Name Values Allowed Values Material Product base Made from other Material Made from Natural Starch, Made from other Material Base ... Packing Packing Material 25KG ...
bathing soap Bathing Soap ( 1476 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes - BIS Marking false CML Number NA - Test Report Details Availability of ... Packing Packing Material Plastic ...
alumino ferric Alumino Ferric ( 160000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked true true BIS Licence Number CML/8200024092 - Test ... 1/2 Packing Material BAR ...
alumino ferric Alumino Ferric ( 20000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES * ISI Marked true true BIS ... value Packing Material Loose ...
alumino ferric MSME Exemption For Years Of Experience And Turnover No Alumino Ferric ( 30000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian ... value Packing Material 20 ...
alumino ferric Alumino Ferric ( 166000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES * ISI Marked true true BIS ... value Packing Material LOOSE ...
alumino ferric Alumino Ferric ( 32000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked true BIS Licence Number CM/L-8608181 - Test Report ... 1/2 Packing Material LOOSE ...
binder clips (Q3), Mounting board or Anganwadi Board (Q3), desktop calculator-Electronics (Q4), Drawing Pin (Q4), Transparent Tape (Version 2.0) (Q4), Packaging Tape (Q4), battery cell as per IS:9128 and IS:8144 (Q4), Fluid Correction Pen (Version 2) (Q4), Box File (Q4), Glue Stick (Version 2.0) (Q4), pins or tacks as per IS: 5653 (Q4), Laminating Pouch (Q4), binding punch machine (Q3), BALL POINT PENS as per IS: 3705 (Q4), Highlighter Pen (Q4), markers- white board (Q4), whiteboard erasers and dusters (Q3), Permanent Marker Pen (Q4), stamp pads (Q4), scissors (Q4), Staplers (Rev) (Q3), Stapler Pin/Staples (Rev) (Q4), Scales (Steel scale) as per IS:1481 (Q4), Sticky Notepad (Q3), Pen or pencil holders (Q4)
alumino ferric Average Turn Over of Last 3 Years 52 Lakh (s) Experience with Gov. Required 15 Year (s) Alumino Ferric ( 100000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian ... 20.0 Packing Material LOOSE ...
alumino ferric Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Alumino Ferric ( 100000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard ... 20 Packing Material Loose ...
alumino ferric Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 5 Year (s) Alumino Ferric ( 100000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values ... 20.0 Packing Material LOOSE ...
alumino ferric Alumino Ferric ( 300000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked true true BIS Licence Number 8200034907 - Test Report ... 1/2 Packing Material 25 ...
alumino ferric Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Alumino Ferric ( 20000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values ... value Packing Material LOOSE ...
alumino ferric Average Turn Over of Last 3 Years 180 Lakh (s) Experience with Gov. Required 10 Year (s) Alumino Ferric ( 350000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values ... 17.5 Packing Material Loose ...
barbed wire Experience with Gov. Required 2 Year (s) Barbed Wire ( 899 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest - Barbed Wire Type Type A Type A, Type B ... 30 PACKAGING Reel ...
barbed wire Experience with Gov. Required 5 Year (s) Barbed Wire ( 691 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest - Barbed Wire Type Type A Type A, Type B ... 30 PACKAGING Reel ...
Adult Stethoscope, Basin 825 ml SS, Boiler or Autoclave, BP apparatus Digital, Cheatle Forceps, Cusco ss graves speculum vaginal large, Cusco ss graves speculum vaginal Medium, Dental Probe, Digital Thermometer, Dressing drum with Lid, Dressing tray ... coded plastic bags Yellow ...
Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 5 Year (s) Barbed Wire ( 3091 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conforming to ... 30.0 PACKAGING Reel ...
barbed wire Average Turn Over of Last 3 Years 500000 Lakh (s) Barbed Wire ( 31500 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest - Barbed Wire Type Type A Type A, ... 30 PACKAGING Reel ...
barbed wire Average Turn Over of Last 3 Years 7 Lakh (s) Experience with Gov. Required 5 Year (s) Barbed Wire ( 1818 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest ... 30 PACKAGING Reel ...
cap fs disruptive jss Average Turn Over of Last 3 Years 8 Lakh (s) Experience with Gov. Required 1 Year (s) Cap Fs Disruptive Jss ( 9740 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed ... * Packing material of ...
Custom Bid for Services - Quote amount for Transp and unloading of ash from DYKE SILO, Custom Bid for Services - Quote amount for Excavation of pond ash from ash dykes of Lara STPP for all 06 kms leads including all labours staff and Tn P as per ... - Packaging Goods ...