Paints Tenders in Assam

ENAMEL, SYNTHETIC, EXTERIOR FINISHING BLACK Spec.- IS:8662/2004 [SECOND REV.] With additional requirements of ICF/ MD/Spec. -045,Issue Status-02 Rev.-03 .Make/ Brand : Regal

Enamel synthetic exterior Finishing Azure Blue Conforming to BIS Specn NO :-IS : 8662 /2004.Shad NO - ISC -104 & ICF Spcen NO- ICF/MD/Specn. 045, Rev-3

Enamel synthetic exterior Finishing Azure Blue Conforming to BIS Specn NO :-IS : 8662 /2004.Shad NO - ISC -104 & ICF Spcen NO- ICF/MD/Specn. 045, Rev-3

ENAMEL SYNTHETIC EXTERIOR FINISHING , AZURE BLUE,SPECN:BIS & ICF SPECIFICATION IS :8662-2004 (2ND REV) ISC:104 TOIS:5-2007 & ICF/MD/SPEC.-045 (REV-03) STATUS-2

Cramping Tools, Black Paint, Red Paint, Aluminium Paint, White Paint, OG Paint, Red Oxide Paint, Acrlyc Sheet 8x4, 4mm

Repair maint of certain flexible portion of runway, taxi track and parallel taxi track with polymer emulsified(cold emulsion) bitumen and repairs to pot holes of flexible pavement of PTT and runway, crack filing of flexible nad rigid portion with el

REPAIRS TO FLOOR / PLINTH PROTECTION / KITCHEN CUB BOARD / ANTIFUNGAL PAINT AND MISC REPAIRS AT DOMESTIC AREA AT AFS UNDER GE (AF) JORHAT

Improvement of official residence of District and Sessions Judge, Nagaon at U.R. road, Nagaon along with improvement in plumbling and paint works

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

PU Air craft blue paint(Base + Hardener) RDSO Specn.No. M &C/PCN-100,(Two packs) specn: RDSO Specn,No.M&C/PCN-100

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

PU Air craft blue paint(Base + Hardener) RDSO Specn.No. M &C/PCN-100,(Two packs) specn: RDSO Specn,No.M&C/PCN-100

PU Air craft blue paint(Base + Hardener) RDSO Specn.No. M &C/PCN-100,(Two packs) specn: RDSO Specn,No.M&C/PCN-100

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

PU Surface paint with hardener (Two pack) to RDSO's Specn. No M&C/PCN/100/2018 with RDS's Amend-1B (Rev-2.0).

Berger 1(litre) Exterior Undercoating Enamel of Black Colour Brand: Berger (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687718875400 dt.03/03/2026)

Enamel Synthetic Exterior type-1 Finishing Golden Yellow. Mat. Specification No: IS: 8662/2004 (2nd Rev.) ISC-356 and ICF/MD/Spec-045 issue status - 2, Rev-3.

Enamel Synthetic Exterior type-1 Finishing Golden Yellow. Mat. Specification No: IS: 8662/2004 (2nd Rev.) ISC-356 and ICF/MD/Spec-045 issue status - 2, Rev-3.

Enamel Synthetic Finishing Signal Red. Spec: BIS & ICF Specn. No: IS : 8662-2004, ISC-537 to IS:5-2007 & ICF/MD/Spec.-045, (Rev-3) Issue status-2

Enamel Synthetic Exterior Tab-1, Satin Blue Finishing, Spec: BIS, ICF. Spec. IS::8662, ISC:177 of IS:05 & ICF/MD/Spec-045 (Rev-3) Issue status-2 .

Enamel Synthetic Exterior type-1 Finishing Golden Yellow, specn: Mat.Specification No: IS: 8662/2004 (2nd Rev.) ISC-356 and ICF/MD/Spec-045 issue status - 2, Rev-3

Enamel Synthetic Exterior type-1 Finishing Golden Yellow. Mat. Specification No: IS: 8662/2004 (2nd Rev.) ISC-356 and ICF/MD/Spec-045 issue status - 2, Rev-3.

Unbranded 1(litre) Exterior Undercoating Enamel of White Colour Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687732986339 dt.06/02/2026)

Enamel Synthetic Exterior type-1 Finishing Golden Yellow. Mat. Specification No: IS: 8662/2004 (2nd Rev.) ISC-356 and ICF/MD/Spec-045 issue status - 2, Rev-3.

Angle iron and all other Specification as per RFP, Cement and all other Specification as per RFP, Coarse sand free from vegetation and all other Specification as per RFP, Coarse aggregate and all other Specification as per RFP, Chain link fencing ... Synthetic enamel paint olive ... RFP, Thinner and ... RFP, Paints brush ... RFP, Paint brush ...

Supply, Installation and Commissioning, Training of Emulsion Stability Analyzer

ANGLE IRON, PAINT RFU GS BLACK, PAINT WHITE, PAINT OG, PAINT RFU BLACK

Agro Net, Chuna, Geru, Broun Paint, Green Paint, Black Paint, Touch Wood Paint

Ready Mixed Paint, Brushing, Bituminous, Black, Lead - Free, Acid, Alkali, Water and Chlorine Resisting as per IS 9862 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 1 Bid Number : GEM/2025/B/6503681 Dated : 28-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Ready Mixed Paint, Brushing, Bituminous, Black, Lead Free, Acid, Alkali and Heat Resisting as per IS 158 (Q3) MSE Exemption for Years Of Experience Yes Startup Exemption for Years Of Experience Yes Document required from seller Experience Criteria, Past Performance *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Past Performance 30 % Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6053624 Dated : 13-03-2025 Bid Document 1/6 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 13915 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Polyurethane Top Coat Silver Grey RAL -7001 RDSO Spec no RDSO/M&C/PCN/100 Brand: ANUPAM PAINTS (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687767804766 dt.29/12/

Enamel Synthetic Exterior type-1 Finishing Golden Yellow. Mat. Specification No: IS: 8662/2004 (2nd Rev.) ISC-356 and ICF/MD/Spec-045 issue status - 2, Rev-3. Spec:

Enamel Synthetic Exterior Tab-1, Satin Blue Finishing, Spec: BIS,ICF.Spec. IS::8662, ISC:177 of IS:05 & ICF/MD/Spec-045 (Rev-3) Issue status-2 or latest.

Enamel Synthetic Exterior Finishing , azure blue, specn: BIS & ICF Specification IS : 8662-2004 ( 2nd Rev ) ISC:104 to IS:5-2007 & ICF/MD/Spec.-045 (Rev-03) status-2

Enamel Synthetic Exterior Finishing White, specn: BIS, ICFSpecification No: IS: 8662 / 2004 (2nd Rev) & ICF/MD/Spec - 045, issue status-2,Rev.-3 or latest. MAKE/BRAND:- ANUPAM ENTERPRISES

Enamel Synthetic Exterior Tab-1, Satin Blue Finishing, Spec: BIS,ICF.Spec. IS::8662, ISC:177 of IS:05 & ICF/MD/Spec-045 (Rev-3) Issue status-2 or latest.

PU Satin blue paint ( Base + Hardener ) RDSO Specn, No. M&C/PCN-100,(Two packs) specn: RDSO Specn, No. M&C/PCN-100,

PU Satin blue paint ( Base + Hardener ) RDSO Specn, No. M&C/PCN-100,(Two packs) specn: RDSO Specn, No. M&C/PCN-100,

Paint Ready Mixed golden yellow Brushing Finishing semi Gloss for general purchase ISC- 356, Specn. IS-13607 : 1992 Amnd-1 of May 2003

Paint Oxford Blue for DEMU Coaches Spec.: IS: 5-2007 ISC No.105 Drg. No. DMU/TC 7-8-3-701,alt-a

Polyurethane Paint Aircraft blue as per Drg.No. RDSO/M&C/PCN/100/2013 specn: RDSO/M&C/PCN/100/2013 Make: ANUPAM ENTERPRISE

PU Satin blue paint ( Base + Hardener ) RDSO Specn, No. M&C/PCN-100,(Two packs) specn: RDSO Specn, No. M&C/PCN-100,

ESSENTIAL MAINT AND EXTERNAL PAINT TO JCOs/OR MD ACCN AND OTM ACCN AT ZONE - 2 TO ZONE - 4 UNDER GE (S) TEZPUR

ELECTRODS WELDING STEEL ARMOURED, ALTERNATOR, OIL FILTER, HOURS METER, VOLT METER, AMP METER, VARNISH PROTECTIVE, VARNISH INSULATING AIR DRYING, CUTTING WHEEL 4 INCH, CUTTING WHEEL 14 INCH

Web welded with Top plate as per Drawing no. LE11313 alt a & LE11318 alt a with welding as per RDSO guidelines for IRSM-41 and with red oxide zinc chromate primer coating. Make and Material Specification: As per Drawing.

PROVIDING AND LAYING OF 150MM X 2 LAYERS OF CEMENTITIOUS BASE CTB INCLUDING PREPARATION OF SOIL BED FINISHED WITH 10MM THICK SAMI LAYER OVER MECHANICALLY CHISELLED MECHANICALLY CLEANED CTB SURFACE DULY PRIMED WITH PRIMER COAT FOR THE SURFACING WORK

NEELICOL 5 (litre) Exterior Finishing Enamel of Bus green(299) Colour Brand: NEELICOL (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687740700471 dt.08/08/2026)