Loading
Loading…
Loading…
37 live24 closing this weekmost from PUBLIC WORKS DEPARTMENT and Eastern Railway
37 results • Best match
Custom Bid for Services - Third Party Inspection (TPI) Agency for shutdown jobs at Haldia Refinery Similar Category Support Services
Custom Bid for Services - FOOD SAFETY & HYGIENE AUDIT AT CLUSTER BASE KITCHENS OVER IRCTC/EZ Similar Category Hiring of Third-Party Inspection Agency
Custom Bid for Services - Post Monsoon-2026 Hydrographic Survey of River Teesta of TLD-III Power Station Similar Category Hiring of Third-Party Inspection Agency
Custom Bid for Services - TRIENNIEL RATE CONTRACT FOR INSPECTION OF MATERIALS AND EQUIPMENT AT VENDORS PREMISES BY THIRD PARTY INSPECTION AGENCY ACCREDITED BY IACS FOR VARIOUS SHIPS UNDER CONSTRUCTION AT GRSE Similar Category Non IT Professional Service (version 2)
Custom Bid for Services - Engagement of Consultant Agency for conducting Comprehensive Energy Audit and APC Audit including Dirty Air Test at maximum full load condition for all Thermal Power Stations of DVC RTPS, Custom Bid for Services - Engagement ... Comprehensive Energy Audit and ... Comprehensive Energy Audit and ... Comprehensive Energy Audit and ... Comprehensive Energy Audit and ... Comprehensive Energy Audit and ... Category Energy Audit Service ... Based Energy Audit Service ... Based Energy Audit Service ... Based Energy Audit Service ... Based Energy Audit Service ... Based Energy Audit Service ...
Consultancy Services for Structural Audit and Certification of Structural Soundness and Suitability for Continued Use of Existing Structures at CW Kharagpur West Bengal
Custom Bid for Services - Physical Stock verification of store inventory of U#1&2 by engaging outsourcing agency through GEM portal at DSTPS, DVC, Andal Similar Category Hiring of Third-Party Inspection Agency
Custom Bid for Services - Structural Stability and Safety Audit of Towers under RailTel Corporation of India Limited, Eastern Region Similar Category Vulnerability and Penetration Testing Hiring of Safety Consultant
Structural stability and safety audit of RailTel Eastern Region towers including capacity assessment load calculation analysis report submission third party vetting and stability certification
Flow Meter Calibration
MS Plug OD 1 Inch with Square head with sealing hole 3mm, 11 TPI
Bolt drilled Hex head 3/4-10 TPI 2-1/4 t [Bolt drilled Hex head 3/4-10 TPI 2-1/4 to EMD Part No.8080722 for the maintenance of HHP Diesel Locomotives]
Calibration Services - Optical calibration; OTDR WITH ACCESSORIES; NABL Labs; Hybrid (detailed in scope of work)
Custom Bid for Services - Fire Safety Audit cum Fire Risk Assessment and Design & Development of Emergency Evacuation Plan along with Specialized Fire Safety Training Similar Category Hiring of Safety Consultant
Calibration Services - Mechanical, Electrical, Thermal, Optical calibration; Dimension, Pressure and Vacuum, Force, Mass and Volume, Hardness & impact, Density and Viscosity, Voltage, Current, Power (AC/DC), Resistance, Specific heat & Humidity, Temp..
Pure Dye Calibration (PDC) QS5 0.2ML STD
Construction of Office Cum Laboratory Building for Export Inspection Agency at New Town, Kolkata. (SH: SITC of double tier Mechanical Car Parking System for Four wheeler car parking).
BI-METALIC BAND SAW BLADE. M-42. SIZE: (4100x34x1.07) mm. 3-4 TPI. SUITABLE ITL-260 DCA/TCSA-TCA(250
CALIBRATION GAS MIXTURE IN 0.5 LTR W/C
Calibration Services - Electrical; Voltage, Current, Power (AC/DC); NABL Labs, CSIR Labs; Buyer premises (onsite)
Testing Service for On-Board/Commissioned Equipment Instrument related to Plant - NDT, hydrostatic pressure test; Ultrasonic Pulse Velocity Tests, Ultrasonic Testing Facility, Visual examination, Magnetic Particle Testing; NABL Labs
Calibration required of different tools in SDAH, CP and Naihati depot in Sealdah division
3.5 mm Self Tapping cortical non locking head screw (S.S Cortical screw 3.5mm of 20 TPI various sizes No.10: 10pcs; No. 12: 10pcs; No. 14: 15pcs; No.16: 15 Pcs)
Probe Cable BNC to BNC 2mtr. Long. Make - EECI/MODSONIC as per RDSO specification no. M&C/NDT/125/2004, Rev-II January 2017 , Clause: 7 (Co-axial Cable)
To carry out "Plant Safety Audit" in CLW Locoshop, Chittaranjan in compliance with The Factories Act, 1948 and The West Bengal Factories Rules, 1958 and as per the IS 14489 (Latest) on "Code of Practice on Occupational Safety & Health Audit" to identify the Hazard existing inside the Factory (Loco shop) premises and their subsequent elimination.
Custom Bid for Services - Maintenance and Calibration of Fixed type CO gas Detectors, LEL detectors and Oxygen Detectors Similar Category Customized AMC/CMC for Pre-owned Products
Inspection report alone with NDT Test, Measurement of reinforcement bar diameter reduction, Depth of carbonation content test and preparation of structural drawing as per report at Mangrove Interpretation Centre building at Sajnekhali, South 24 Parga
Custom Bid for Services - Two year Annual Contracts for Calibration of Various instruments Similar Category Customized AMC/CMC for Pre-owned Products
" BLADE, BANDSAW BI-METAL, SIZE: 4860X41X1.3MM 3/4, TPI GRADE: M42"
1) White contrast paint (400 ml Can) conforming to BS: 5044, BS: 6072, IS: 3703,ISO 9934 2) Black magnetic particle ink (400 ml Can) conforming to RDSO/M&C/NDT/109/2007 (Rev02) Oct 2020, AMS 3041, IS 6410, ASTM E 709, ASTM E 1444, IS: 3703, ISO 9934
Ranaghat Aranghata (New) Road from 6.50 Kmp to 7.50 Km emergent patch repairing AND maintenance work under Quality Control Sub Division No. I of Nadia Highway Division No. II during the year 2026-27
Repairing Potholes Work in Patches due to Excessive Rainfall on Bishnupur-Aishmali Road from Ch 8.00 Km to 9.00 Km under Quality Control Sub Division No. I of NHD No. II during the year 2026-27
Repairing Potholes Work in Patches due to Excessive Rainfall on Bishnupur-Aishmali Road from Ch 9.00 Km to 10.00 Km under Quality Control Sub Division No. I of Nadia Highway Division No. II during the year 2026-27
Temporary Restoration Work in Patches due to Excessive Rainfall on Nokari-Aishmali Road from Ch 7.00 Km to 8.00 Km under Quality Control Sub Division No. I of Nadia Highway Division No. II during the year 2026-27
Dye-Penetrant test Conforming to RDSO Sp [Dye-Penetrant test Conforming to RDSO Specen.No.M&C/NDT/105/2001With latest Revision,compriseing of the following items: 1.Penetrant Visibility Method-A,C&D,Sensitivity Level-3,in Aerosol can of 500 ml capacity(Type-II). 2.Non-Halogenated (Class-2)solvent removers/Cleaner in Aerosol can of 500 ml capacity. 3.Non Aqueous developers (i.e from -d),in Aerosol can of 500 ml capacity.Penetrant,Developer and Cleaner per kit in the ratio of 1: 2: 3.]
PROCUREMENT OF SINGLE STAGE B.M.C.G.-L.P.G. (BUTANE GAS) REGULATOR FOR GAS CUTTING, HIGH SPEED STEEL POWER HACKSAW BLADE FOR WORKS CONTRACT CONFORMING TO IS 2594-1977, SIZE-1.25 INCH X 18 INCH X 10 TPI X 16 SWG., WHITE CHALK IN LUMP FORM., LIQUID D