Tyres Tenders in Haryana

Replacement of outlived fixing of Tyre of Sewer Cleaning Machine Truck of size 10.00-20 MRF Make complete in all respect

Solid Cushion Tyres (V3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6874437 Dated : 10-11-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 40000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Solid Cushion Tyres (V3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No RCM Applicable Yes Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6697349 Dated : 18-09-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Solid Cushion Tyres (V3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6874666 Dated : 10-11-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Solid Cushion Tyres (V3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6874514 Dated : 10-11-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Solid Cushion Tyres (V3) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No RCM Applicable Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6874572 Dated : 10-11-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Multimeter Mashtech, Bench Grinder 6 Inch, Bench Vice 6 Inch, Drill Machine 13mm, Tyre Ring Remover Tools, Tyre Bead Breaker Tool, Check Nut Spanner Front Wheel ALS, Check Nut Spanner Rear Wheel ALS, Impact L handle 450 Mmm 19mm drive, socket Impact 50 no 19mm Drive, Extension 200 mm Impact 19mm drive

Repair and Overhauling Service - Electronic Weighing Systems as per IS 9281 (Part I, Part II, Part III, Part IV); DIGITAL TYRE INFLATOR; Yes; Buyer Premises

Weighing Machine, Mat, Pillow, Crompton Cooler, Portable Toilet Trailer Tyre, Curtain with Stitching, Blanket, Blazer Cloth Super quality, OTG Oven, Lawn Mower, Shoe Shiner, Pedestal Fan

Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply Marked to IS 15636 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No RCM Applicable Yes Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6397549 Dated : 30-06-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

2610 000286 Nylon Type JCB, 2610 001594, X 3806750 Code 20 V for Tyre Size, 2610 001580 With Valve 1300 X530X533, 09482M00551 Spark Champion RC 8 Y

Pneumatic Tyres For Passenger Car Vehicles - Diagonal And Radial Ply Marked to IS 15633 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No RCM Applicable Yes Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6397670 Dated : 30-06-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Pneumatic Tyres For Passenger Car Vehicles - Diagonal And Radial Ply Marked to IS 15633 (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 2 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2026/B/7139146 Dated : 22-01-2026 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

FRAMES AND STEERING ASSEBLY, SUSPENSE ARMS AND SHOCK ABSORBER, ALL TERRAIN WHEEL DRUM TYRE AND HUB AXLE, WELDING ROD 3 MM, WHEEL CUTTER 4 INCH, WELDING ROD 2.5 MM

Pneumatic Tyres For Passenger Car Vehicles - Diagonal And Radial Ply Marked to IS 15633 (Q2) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No RCM Applicable Yes Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6442549 Dated : 11-07-2025 Bid Document 1/6 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Nitrogen Tyre Inflators (Q3) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6665145 Dated : 10-09-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply Marked to IS 15636 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Bidder Turnover, Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 2, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6734304 Dated : 26-09-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

OTR Tyres (V2) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7073635 Dated : 16-01-2026 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 4 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply Marked to IS 15636 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Number of Auto Extension count 1 Bid to RA enabled No RCM Applicable Yes Type of Bid Single Packet Bid Bid Number : GEM/2025/B/6774240 Dated : 10-10-2025 Bid Document 1/6 Time allowed for Technical Clarifications during technical evaluation 7 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Payment Timelines Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

LV7 BAZ 5937 6524100 10AMC 10 COCK DRAIN, LV7 33920M 80CS0 CONTROLLER ASSY EPI, LV6 MT11 2540 000010 ASSY TYRE PARSONS TYRE, LV6 T 815 MT 6 336 631 105 308 HOSE HV 1, LV6 MT 14 5306 057201 BOLT, LV7 ITR BEML 50 301 D SHACKLE LOT 3 4, LV7 ITR BEML 4030 000474 50 48 1 TYPE DEE 48MM LOT 2 3 4, LV7 ITR BEML 4730 000908 STRAIGHT PIPE

Engine mounting pad MG, Wear spring clamp ALS, Self- bush 2 Ton, Fuel Feed pump ZIL, Air pressure valve tyre HMV, Pressure plate ALS, pilot brg ALS, Clutch realise Brg with HUB ALS

Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply Marked to IS 15636 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6451141 Dated : 14-07-2025 Bid Document 1/5 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

VEH SWT NEUTRAL 11A INSENSY PART No- 25174417SD00016 (Q3), TYRE SLD BLK 7.00X12 TREAD PART NO-25172503sd00008 (Q3), ENGPA S4 36SG4005 PLASTIC FAN PART NO-26101504PA01838 (Q3), SERV KIT TRANS REPAIR MAJOR GXLD PART NO-25174897DG04327 (Q3)

PAINT SMOKE GREY, PAINT DEEP ORANGE, PAINT GREEN, PAINT BLACK, PAINT WHITE, PAINT YELLOW, PAINT SAFFRON, PAINT BUS GREEN, PAINT ALLUMINIUM, THINNER GP, TYRE PAINT RUBBER, PUTTY DUCO, PAINT OLIVE GREEN, PAINT RED, PAINT AF BLUE, PAINT DOVE GREY

Operation and maintenance of departmental super sucker machine set (1 No. Super Sucker Machine, 1 No. Water Tank, 2 No. Sewerage Dump Tank) including all maintenance like tyres, denting, painting, passing pipes, jetting pipe, pump etc. complete in al

Operation and mtc. of departmental Super Sucker Machine Set 1 No. Super Sucker Machine, 1 No. of Water tank, 1 No. of Sewerage Dump Tank including all mtc. like tyres, denting painting, passing, pipes, jetting pipe, pump etc complete in all respect

LV6 MT11 7739 BUCKLE, LV6 MT11 2540 000019 TYRE PARSONS SINGLE TYPE FOR, LV6 MT3 6220 000052 BACK OUT STOP, LV7 ITR 5306 003512 BOLT HEX, LV7 ITR BEML 3110 003550 COLLER BEARING OD, LV7 LD F 2348360 DELETED BULB FOR, LV7 LD CVD F 4730500 OIL

Plastic Box 500 ml, Desert Cooler, Exhaust Fan, Automatic Change Over Switch, Folding Table, Torch Hand, Laser Pointer, Cloth Stand, White Arm Band, Nylon Rope, Tyre Inflator Pump, Raxine Cloth size 14 x 13 ft, Raxine Cloth size 1 point 5 mtr x 1 mtr, Connector 16 Pin, Fan Belt

Cleaning and repair work for various drain/nalla for prepration of Rainy season in MC Thanesar. 1. Sindhi Sweets pipli to pooja clg wali gali ward-9 2. Gupta tyres to h/o ram kumar garg ward-10 3. Gupta sweets to bid pipli mode ward-10 4. Geeta d

FUEL FILTER, PRIMARY FILTER, OIL FILTER, AIR FILTER INNER, AIR FILTER OUTER, HYD FILTER, TXN FILTER, FAN BELT, TYRE PRESSURE GAUGE, HOSE PRE FILTER TO FEED PUMP, ADAPTER FOR AIR FILING, TOOTH BUCKET, CAP FUEL TANK, FACE FAN, GRILL LEFT HAND, GRIL RIGHT HAND, THROTAL CABLE ASSY ACCRETOR, GRILL FRONT RADIATOR COVER, LATCH RIGHT HAND, LATCH LEFT HAND

Inflation Cock Seal, Steering Slide Valve Pipe, G 290 Drive Belt, 8 Kg Compressor Belt, Brake Master Cylinder Kit, Clutch Master Cylinder Kit, Clutch Amplifier Seal, Clutch Amplifier O Ring, High pressure Hose 22 mm, High pressure Hose 28 mm, Wheel ... Ring, Tyre Inflation ...

Inflation Cock Seal, Steering Slide Valve Pipe, G 290 Drive Belt, 8 Kg Compressor Belt, Brake Master Cylinder Kit, Clutch Master Cylinder Kit, Clutch Amplifier Seal, Clutch Amplifier O Ring, High pressure Hose 18 mm, High pressure Hose 20 mm, Wheel ... Ring, Tyre Inflation ...

Toner Cartridge HP 88A, Toner Cartridge HP 12A, Sheeba Dashboard Polish 200ML, Tyre Sprey Polish Sheeba 300 ML, Car Wash Shampoo Sheeba 300 ML, Liquid Car Polish 250 ML Sheeba, UPS 1 KVA, Metal Grass Sword for cutting grass and bushes, Multifunctional Grass sickle Heavy Duty, Bile Hook heavy duty Dah, Mild steel hand driven trolley

P 3700820 SOLENOID, 2530 018232 F 8076000 VALVE RELAY AIR PRESSURE, 2930 002889 CLUTCH FAN ENGINE, 2530 72 0461313 VALVE RELAY AIR PRESSURE, 1468 336 671 DISTRIBUTOR HEAD, 2576 8240 0101 WIPER ARM, 2625 8855 SOLENOID, 2751 1540 9903 SOLENOID, TOOL ... 0134 TYRE INFLATING ...

LV7 VF P 1304856 NOZZLE, TOOL KIT CVD IA 130293 2510 000017 BONNET COVER AND RADIATOR MUFF, TOOL KIT F 1931150 TYRE INFLATOR HOSE, TOOL KIT NCVD NK 95 USER HAND BOOK SS ENGLISH, TOOL KIT CVD TMB 621 2050038 BULB 12 3 21 6 FOR STOP LAMP, LV 7 2651 8240 0114 WIPER BLADE, LV7 2575 2560 3106 CLUTCH BEARING

twin bin dumper placer product and material transport Twin Bin Dumper Placer Product And Material Transport ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters ... Outside Tyre x ... Driving Tyre ) ... Vehicle Tyre Tube ... Front Tyre ( ... Rear Tyre ( ... Front Tyre with ... Rear Tyre with ...

twin bin dumper placer product and material transport Experience with Gov. Required 5 Year (s) Twin Bin Dumper Placer Product And Material Transport ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name ... Outside Tyre x ... Driving Tyre ) ... Vehicle Tyre Tube ... Front Tyre ( ... Rear Tyre ( ... Front Tyre with ... Rear Tyre with ...

09265M 41001 FRT WHEEL, 2752 2520 0106 DIA DISC, 1527 2008CN PASSENGER, 2154 2810 0102 COMPLETE, 2530 017910 CYLINDER, 2573 2520 0108 ASSY, 2573 4370 0108 DUAL, 2573 5450 9931 CUT OFF, 2610 7250 0117 WINDOW, 2625 8081 FIELD, 2641 4370 0105 AIR ... 8030263 TYRE ,

Refuse Compactor ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5675 * Model No. - * Pay Load Capacity (Tonn Load) 11.25 1-50 ... Vehicle Tyre Radial ... Front Tyre 2 ... Rear Tyre 4 ... Front Tyre with ... Rear Tyre with ... Outside Tyre x ... Driving Tyre ) ...

drape surgical disposable for eye surgery 100cmx 70 cm with adhesive area and attached pouch in pre sterilised pack point, Sterile eye patch with adhesive Disposable, Silicon tire Pre sterilized 7mm 276 series Disposable, Bandage contact lenses, ... Silicone Tire Pre ...

Tyre Killer (MHA) (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2024/B/5742226 Dated : 29-01-2025 Bid Document EMD Detail 1/6 Advisory Bank State Bank of India EMD Amount 38680 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 15 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Director, TBRL Terminal Ballistics Research Laboratory Chandigarh, Department of Defence Research & Development Organisation, Sector-30, Chandigarh (Director) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

MS Pipe 100 mm, MS Pipe 25 mm, First Aid Hose Reel, Hydrant Valve, Hose Box Double Door and Single Door, Hose Pipe 15 mtr and 30 mtr, Branch Pipe, Pump HP 12 Tyre MB LPM 900, Starter Panel, Cable, N R B, Butterfuly Valve, Ball Valve, Sprinkler, MS Union, MS Elbow, MS Flange, Fire Alarm Panel, Smoke Detector, MCP Manual Call Point, Fire Extinguisher ABC 4Kg, Smoke Fitting, Map Online NOC from Fire Department, Water Tank 5000 Ltr, Labour charges of all work

ASBESTOS INDUSTRIAL BRAKE LINING IN ROLL FORMINTER WOVEN WITH BRASS WIRE. SIZE: SIZE-W-200 X TH 8 MM, ASBESTOS INDUSTRIAL BRAKE LINING IN ROLL FORMINTER WOVEN WITH BRASS WIRE. SIZE-W-300 X TH. – 12 MM, ASBESTOS INDUSTRIAL BRAKE LINING IN ROLL ... MODEL-FYSAXAMJ545, TYRE BUSH ...

LV6-MT14 2610-000154 TUBE INNER PNEU 9 00 20 LP TB C W VAL, LV6-MT14 2610-000102 TUBE 3 00 3 25 3 50 19 LP M C C W, LV6-MT14 2640-000256 FLAP SIZE 475 533, LV6- MT14 PHIL-RP-651112 TYRE235 70 R16 105 S S B L A TERRAIN, LV6-MT14 2610-000273 FLAP RUST ... 110279 TYRE PNEU ...

045022 6029 FUEL MULTI STAGE FILTER, 2751 1540 9909 CONNECTOR, TOOL KIT 1502 600 83004 LONG HOSE, TOOL KIT 150 2600 84004 SHORT HOSE, TOOL KIT BBD 4900000 001 GAUGE TYRE PRESSURE, LV7 P 1606451 KIT MASTER CYLINDER MAJOR, LV7 P 2520 72 0306678 LEVER ASSEMBLY CLUTCH, LV7 F 002D11413 FUEL SHOT OFF SOLENOID, LV7 VF F 2208800 COMBINATION SWITCH, LV7 X 4703211 WRENCHES KEY SOCKET HEAD SCREW, LV7 5120 423955 WRENCH OPEN, LV7 T 815 5975 065236 JACK PAD, LV7 T 815 4240 000477 MASK WITHOUT PORTS

hopper or tipper Hopper Or Tipper ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction ... Outside Tyre x ... Driving Tyre ) ... Vehicle Tyre Radial ... Front Tyres (mm) ... Rear Tyres (mm) ...

LV7KRZ HUB BOLT, LV7KRZ HUB SEAL, LV7KRZ HAND BRAKE HOSE, LV7KRZ BRAKE BOOSTER HOSE, LV7KRZ STERING CONTRAMES OUTLET HOSE, LV7KRZ SILICONE HOSE 48 MM MTR, LV7KRZ SILICONE HOSE 42 MM MTR, LV7KRZ SILICONE HOSE 38 MM MTR, LV7KRZ TAIL BASED LOCK CHAIN, ... LV7KRZ TYRE INFLATOR ...

Axle with Hub, Rim 8 00 19, Rim 7 00 19, MS Channel 3 inch by one and half inch, MS angle one and half inch by two suid, MS flate one and half inch by two suid, MS angle two and half inch by two and half suid, MS round five suid, MS flate 150 by 10 ... gauge, Tyre 8 ...

TOOL KIT CVD 2154 581 09901 TOMMY, 2920 005212 RELAY SOLENOID ENGINE, 2751 1540 6515 POLE SCREW, 2786 0999 9920 STRAINER, 2654 4310 0104 BRAKE FLUID CONTAINER, 2534 2015 6309 COGGED V BELT 113M LG, TOOL KIT F 4734911 DE SPANNER METRIC, TOOL KIT NCVD ... 45448 TYRE LEVER, ... 03018 TYRE PRESSURE, ... 400 TYRE PRESSURE, ...

hopper or tipper Average Turn Over of Last 3 Years 1000 Lakh (s) Experience with Gov. Required 10 Year (s) Hopper Or Tipper ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER ... Outside Tyre x ... Driving Tyre ) ... Vehicle Tyre Radial ... Front Tyres (mm) ... Rear Tyres (mm) ...