Advanced Weapons And Equipment India Limited Tender Results

BALL SCREW AND NUT ASSY. AS PER TEND DRG NO. : 2886, FOR Y-AXIS OF JYOTI VMC-1050. HARDNESS: 55-65 HR

BRASS ROUND 38.1+ 0.25 MM DIA. TO SPECN. BS - 2874- CZ-121-PB3 -" M" IN THE LENGTH OF 2 MTRS (MINIM

FORGING FOR BARREL TO GSF DRG NO F-2347 A (COMP. DRG. NO-AO-18.01. 018) FOR AK 630 GUN.

POWER SUPPLY* INPUT VOLTAGE 100-240 V AC* OUTPUT VOLTAGE 30.5 V DC* OUTPUT POWER 91.5 W* 3 A. IDENT N

Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) MSE Relaxation for Turnover Yes | Complete Startup Relaxation for Turnover Yes | Complete

SCREW CLAMPING TYPE LEFT HAND INTERNAL TOOL HOLDER AS PER ANNEXURE-09. MAKE- SECO/KOMET/TUNGALOY/DIJ

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT (AMC) FOR DESKTOP COMPUTERS, ALL TYPES OF PRINTERS, SCANNERS, PROJECTORS & UPS OF VARIOUS CONFIGURATIONS AND TERMS AND CONDITIONS AS PER ANNEXURE FOR THE YEAR 2025-26 Similar Category Annual Maintenance Contract for Network Security Devices Annual Maintenance Service - Desktops, Laptops and Peripherals Annual Maintenance Contract for Networking Devices (Version 2)

VCI Film Flat Bag 2D as per OFC drg. No. SK-10145 REV A

P. B. HOLLOW BAR 135MM O/C X 95MM I/D IS: 28-1985 GRADE 2, CONTINOUS CAST.

01 NOS. INDEXABLE INSERTED CUTTER SHANK TYPE. CUTTING DIA, 16MM SHANK DIA. 16MM. OVERALL LENGTH 120MM

ST. SQR. 50 MM TO SPECN. BS: 3S144: 1995(1999) GRADE S144H. SUPPLY CONDITION: HOT ROLLED & ANNEALED IN" D"

SOLID CARBIDE END MILL TO KENNAMETAL PART NO-F4 AJ 1200 ADN 30 KC 625 M DIA 12.0 X CEL 26 X 83 OAL

STEEL ROD 200 DIA (+ 0/-5MM) IN 350MM LENGTH & ABOVE TO SPECN: IS-3749-1978 XT160CR12 IN FORGED ANNEA

WHEEL CHAIN(SNOW CHAIN) ARTICLE NO. 6351639. (CES ITEM (SECTION-1) DRG. NO. GCF/50/40646

Body (Reciver) as per drg. no. PAG-0059/A (Raw material shall be supplied by OFPKR)

SET OF HONING TOOL HEAD OF DIA 250MM WITH EXPANSION UP TO 275MM WITH ONE SET OF WEDGES AND STONE HO

STEEL ROUND 70MM DIA TO SPECN. IS: 2004-1991 GRADE 45C8, CLASS-4 NORMALI SED

STEEL SQR. 75MM. TO SPCN. IS: 2004-1991 GRADE 45 C8 CLASS 4. SUPPLY CONDITION: - AS FORGED & NORMALISE

BRACKET FORE SIGHT (JVPC) WITH SAF MATERIAL DRG. NO. 0204 03 04 11 18 003 00DA

HIGH PRECISION INLINE PLANETARY GEAR BOX (AB142-070- S2-P1)/SIEMENS 1 FK7063 - 5AF71) SUITABLE FOR

Set OF SPARES FOR SHOT BLASTING MACHINE MAKE M/S SURFACE INTERNATIONAL AS PER SPECIFICATION NO. 039

SOLID CARBIDE END MILL DIA 12MM, OAL 100-110MM FL- 50-60MM. MAKE- TAEGUTEC/ISCAR/GUHRING/SANDVIK/TIT

SOLID CARBIDE DRILL DIA 12.50MM X FL 55-65 X OAL 90- 100MM. MAKE- MOTHERSON/TUNGALOY/GUHRING/SECO/I

MM, BODY LENGTH MAX 16 MM, INDEXABLE CARBIDE HEAD FOR 3 MM CONCAVE RADIUS CHAMFERING WITH 2 NOS OF FLUTES, CUTTING DIA 6.5 MM &

SOLID CARBIDE DRILL SIZE DIA 2.8 MM X FLUTE LENGTH 15 MM X OVER ALL LENGTH 80 MM SHANK DIA 4 MM, MUL

INDEXABLE SINGLE INSERTED DRILL SET CONSISTS OF 01 NO. DRILL DIA: 18MM; LENGTH: 125 MM TO 130 MM/THR

INDEXABLE SINGLE INSERTED DRILL SET CONSIST OF 01 NO. DRILL HOLDER OF DIA: 22.5MM THROUGH COOLENT SY

HAND SPIKE ASSY TO DRG. NO. M2/BOF-4023835

TRIGGER TO DRG NO. TSP-706 for 30-06 SPORTING RIFLE

SOFT JAW AS PER DRG. NO. LP-3000.

ST. RD. 50x2200 TO SPCN. BS: 3S144-95(99) GD-S144H. LFVD(WITH CAL. SILICATE TREATMENT% OF SULPHUR & PHOS.

CAPACITOR -1) CAPACITY- 1000KVAR 2) VOLTAGE-750VAC 3) PHASE-1PH 4) FREQUENCY- 600 HZ 5) TAPPINGS- 04 TAP

Custom Bid for Services - REPAIR OF MLFB NO 6SL31113VE220HA0 REP NO: B14022026-16199-01-01-01 Similar Category Repair and Overhauling Service

SPRING CATCH REARSIGHT CURSOR TO DS CAT NO. 5360- 000512 DC(I) NO. 27694-SA DT- 30.03. 24 IN FINISHED

BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO. 27690-SA DT. 16.03. 24 IN FINISHED CONDITION.

“ HIGH ACCELERATED CHROME SALT EFFICIENCY: 23-26% AS PER SCOPE OF WORK & TECHNICAL SPECIFICATION (AN

ANTI CHATTER TYPE INDEXABLE THROUGH COOLANT HIGH FEED (FEED UP TO 10000) CUTTER DIA 25 MM X OAL 140, LARGE LAND & OPTIMAL RAKE ANGLE POSITIVE GEOMETRY 4 CUTTING EDGE INSERT (INSERT WIDTH 6 MM, THICKNES

FINISH MACHINING OF EXTRACTOR ARTILLERY CARTRIDGE TO CAT PR No. NI/1015-000252 (IFL7682)

SOLID CARBIDE END MILL DIA 6.0MM X FLUTE-4 X CEL 12 X OAL 60 X SD6. MAKE-SANDVIK/ISCAR/SECO(JABRO)/M

PLUG (N15-417-F-111) AS PER DRG. NO. 10343523

ELECTRIC STRIKER IN ASSY ASSEMBLE DRAWING WITH DETAILS TO DRG. NO. 902-01-300-C6-1 (CONSISTING OF CONT

Automatic and Semi Automatic Welding Equipment with Self Adjusting Arcs MIG/MAG as per IS 7931 (Part 1, Part 2 and Part 3) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

UNIVERSAL RECOIL FLUID: 75: 25 CAT/PT. NO. H1(B)/6850- 000111, TO SPECN. NO. IND/SL/0065. NOTE- PACKI

SEAL PACKING TO DS CAT NO 5335-000356 OF BOF STD TABLE NO N9-12

BENDING OF TRAIL TUBE TO DESIGN. NO. ILG-1452 PT. NO. IWP-1947 (STRAIGHT TRAIL TUBE FOR BENDING TO BE S

PIT TYPE NITRIDING FURNACE

RECEIVER AS PER DRG. NO. 1804 01 01 01 01 000 00DG FOR LMG 7.62 X 51MM BELT FED

4100400487 Milling insert for shoulder mill cutter dia. 80 mm, 4 cutting edges, cutting depth min. 4, 4100400488 Insert screw suites to shoulder mill cutter dia. 80 mm and insert., 4100400489 Insert screw key suites to insert screw of shoulder mill cutter dia. 80 mm and insert., 4100400661 Shoulder mill cutter dia. 80 mm, Bore 27 mm, minimum 6 pocket and with SHIM, Overall leng

SQUARE SHOULDER FACE MILL DIA 50 X CEL 10.7 X NO. OF INSERTS 5 OR 6 X MOUNTING DIA 22 OR SIMILAR TO I, INSERTS SIMILAR TO ISCAR ORDERING CODE NO. S90 MT 1106PCR. IC 328 FOR SQUARE SHOULDER FACE MILL DIA 50, SPARES FOR SQUARE SHOULDER FACE MILL DIA 50 X MOUNTING DIA 22 X NO OF TEETH 5 OR 6 SIMILAR TO ISCAR

SUPPLY OF PVC DOOR AS PER SPECIFICATION SPECIFIED IN ANNEXURE NO. MBE/PV DOOR/10/2024 DT 16/10/2024