Advanced Weapons And Equipment India Limited Tenders

ENERGY EFFICIENT INDOOR TYPE 80 WATT LED HIGH BAY LUMINAIRE LUMINOUS EFFICACY: > 120 (LUMEN/WATT)

SWITCH FUSE UNIT MODEL FN 250 TRIPLE POLE AND NEUTRAL IN SHEET STEEL ENCLOSURE CAPACITY 250 AMPS AND

SOLID CARBIDE ENDMILL DIA 12 MM WITH CR 3.0 MM DIA 12, OAL - 83(+ -5), F/L-26(MIN), SH DIA 12

SOLID CARBIDE END MILL CUTTER FOUR FLUTED DIA 10 MM X FL-45+/-5MM X OAL 100 MM (MINIMUM) WITH TIALN

TOOL NO-36 FOR 155X52 CALIBER BREECH RING (K-9 VAJRA) . SET OF PERFORMAX U DRILL DIA 27.0MM WITH L/D

TOOL NO -45 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . SET OF EXCHANGEABLE X-TIP DRILL FOR DIA 16.70M

SET OF TOOL NO -41 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . INSERTED SQUARE SHOULDER MILLING CUTTER

SET OF TOOL NO -25 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . CAPTO C4 DAMPED FINISH BORING BAR, DIA

Propeller Type AC Ventilating Fans (Exhaust Fan) (V3) Conforming To IS2312 (Q2)

SET OF TOOL NO -08 FOR 155 X52 CALIBER BR RING (K-9 VAJRA) . CAPTO C3 FINISH BORING BAR, DIA RANGE, 3

GAUGE NO. G-SK-7489-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/92 DATE- 16/07/, GAUGE NO. G-SK-7494A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/103 DATE- 16/0, GAUGE NO. G-SK-7488A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/91 DATE- 16/07, GAUGE NO. G-SK-7490-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/94 DATE- 16/07/, GAUGE NO. G-SK-7492-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/98 DATE- 16/07

GAUGE NO. G-SK-7487A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/89 DATE-16/07, GAUGE NO. G-SK-7493A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/101 DATE-16/0, GAUGE NO. G-SK-7493-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/100 DATE- 16/07, GAUGE NO. G-SK-7492A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/99 DATE- 16/07, GAUGE NO. G-SK-7494-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/102 DATE- 16/07

“ ALUMINUM OXIDE 99% PURE, NON MAGNETIC (WHITE FUSED ALUMINA 46 GRIT FOR ABRASIVE BLASTING. AS PER AN

GAUGE NO. G-SK-7495-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/104 DATE- 18/07

SET OF TOOLSET FOR TOOL NO -09 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . SET OF THRU COOLANT U-DRILL

H. T. SOCKET HEAD CAP SCREW F/T 10.9 SIZE: - M30X80X3.5mm

SET OF TOOL NO -26 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . DIA 63MM GROOVE MILLING CUTTER, W-1.3MM

DE-RUSTING TANK FOR PHOSPHATING PLANT AS PER RFI SK 11301.

TOOL NO -11 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . SET OF KENTIP FS FLANGED SHANK DRILL (MODULAR

GAUGE NO. G-SK-7489A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/93 DATE-16/07, GAUGE NO. G-SK-7491A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/97 DATE-16/07, GAUGE NO. G-SK-7491-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/96 DATE- 16/07/, GAUGE NO. G-SK-7490A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/95 DATE- 16/07, GAUGE NO. G-SK-7488-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/90 DATE- 16/07

GAUGE NO. G-SK-7487-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/88 DATE- 16/07/, GAUGE NO. G-SK-7495A-M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/105 DATE- 18/0, GAUGE NO. G-SK-7496-A M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/107 DATE- 18/, GAUGE NO. G-SK-7499 M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/112 DATE- 18/07, GAUGE NO. G-SK-7497A M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/109 DATE- 18/0

2200T AS PER DRAWING NO. R106

COVER, MOTOR AS PER DRG. NO. Y18725A-00 FOR COCKING MECH. ASSY OF SRCG.

SOLID CARBIDE DRILL LONG SERIES– MICROGRAIN, TIN COATED DIA 4 MM X FDL43 X OAL 75 TO MACHINE ALLOY S, SOLID CARBIDE DRILL LONG SERIES MICROGRAIN, TIN COATED DIA 5 MM 86 OAL X 52 FL, SOLID MICROGRAIN PREMIUM CARBIDE TIALN COATED DELTA DRILL DIA 10.10 MM X CEL 43 X OAL 89 TO MACHINE, MICRIGRAIN SOLID CARBIDE DRILL DIA 4.9 MM WITH POINT ANGLE 140 DEGREE AND SELF CENTERING GEOMETRY X, SOLID MICROGRAIN PREMIUM CARBIDE LONG LENGTH TWIST DRILL, POINT ANGLE 140 X HELIX ANGLE 24 X DIA 06., SOLID CARBIDE TIN COATED DELTA DRILL DIA 6 MM X FL 28 MM X DAL 66 MM X SHANK DIA 6 MM. SIMILAR TO S, SOLID CARBIDE DRILLLONG SERIES-MICROGRAIN, TIALN COATED DIA 10 MM X FL 102 X 152 TO MACHINE ALLOY ST, MICRO GRAIN SOLID CARBIDE DRILL DIA 10 MM WITH POINT ANGLE 140 DEGREE AND SELF CENTERING GEOMETRY, SH, SOLID CARBIDE DRILLING (LONG SERIES) -MICROGRAIN, TIN COATED, DIA 3 MM X FL33 X OAL 61 TO MACHINE ALLO, PARALLEL SHANK TWIST DRILL SOLID CARBIDE AS PER DIN 338 LONG, LENGTH RH CUTTING, POINT ANGLE 118 DEG

TOOL NO -38A FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . TOOL SET CONSISTS OF SOLID CARBIDE LONG DRIL

TOOLSET FOR TOOL NO -44 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . SET OF EXCHANGEABLE TIP HEAD DRILL

Custom Bid for Services - REPLACEMENT OF EXISTING MS COMPRESSED AIR LINE FROM DEDICAT- ED COMPRESSOR ROOM FOR CNC TR, TR & ASSY SECTION (ADJACENT TO ASSY SEC ) UP TO ASSY CNC TR AND TR ENTRANCE WITH EXTRUDED ANODIZED ALUMINIUM PIPE LINE ON WHOLE J.. Similar Category Repair and Overhauling Service

GAUGE NO. G-SK-7498A M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/111 DATE-18/0, GAUGE NO. G-SK-7498 M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/110 DATE- 18/07/, GAUGE NO. G-SK-7499A M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/113 DATE- 18/0, GAUGE NO. G-SK-7496 M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/106 DATE- 18/07, GAUGE NO. G-SK-7497 M/P AS PER SPECIFICATION IN ANNEXURE NO. -MACHINE PISTOL/GAUGE/26/108 DATE- 18/07

TOOL NO -38 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . TOOL SET CONSISTS OF SOLID CARBIDE PILOT DRILL

H. T. SOCKET HEAD CAP SCREW F/T 10.9 SIZE: - M30X160X3.5mm

COVER RECEIVER AS PER DRG NO. K-1501* 2 WITH FIRMS MATERIAL FOR TAR-25.

TOOL NO-34 FOR 155X52 CALIBER BREECH RING( K-9 VAJRA) SET OF THRU COOLANT HEAD INDEXABLE TYPE DRILL

LEVER TO DRG. NO. BOF - 5045022 FOR HOPPER AUTO IN FINISHED CONDITION.

TOOL AND ACCESSORIES BOX GREASE ASSY TO DRG NO. M2/BOF-5008234) COMPRISING OF DRG TO CAT/PT NOS M/2BO, PICKET WELDING ASSY (L70/155) TO DRG NO- 3014629

SET OF TOOLSET FOR TOOL NO -33 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . SET OF SOLID CARBIDE THRU C

" O" RING DIA 195MM AS PER DRG. NO. EP-1007 FOR STABLIZER ASSYOF PINAKA MK-I (ENHANCED) & GUIDED PINA

SENSOR HEAD (FOR ALPHA IBZ SENSOR), TYPE: A860-2150- V001

HSS M42 LONG FLUTED MACHINE REAMER DIA 12.02+ 0.02 X CEL 76 X OAL 156 MM, HSS M42 REAMER DIA 3 H7 X CEL 30 X OAL 135 X MTA1 SHANK X WITH LH HELIX RH CUTTING & TIN COATING OTH, HSS ASP30 GRADE, TIN COATED, LONG FLUTED HELICAL M/C REAMER DIA 3.01 H7, CUTTING EDGE LENGTH 80.0, PARALLEL SHANK HSS MACHINE CHUCKING REAMER UNGUIDED WITH HELICAL FLUTE OF DIA 3 MM X CEL 35 MM X OAL, APER SHANK OF MTA1 HSS M42 GRADE MACHINE REAMER UNGUIDED WITH HELICAL FLUTE OF DIA 4.05 MM X CEL 25, HSS M42 REAMER DIA 6 X CEL 47 X OAL 127 X MT1 SHANK WITH TIN COATING AS PER IS: 5445-1978, HSS M42 TIN COATED MACHINE REAMER TO DIA 6.03 X CEL 50 XOAL 165 WITH MTA1 SHANK WITH LH HELIX RH CUT, HSS M 42 TIN COATED MACHINE REAMER TO DIA 6.55+ 0.02MM CEL 50, OAL 230, MTA1 SHANK WITH SIX LH HELIX, HSS M42 LONG FLUTED MACHINE REAMER DIA 4.01 H7 X CEL 60 X OAL 133 X MTA1 SHANK X LH HELIX RH CUTTINH

CAPACITOR MODULE 4500 HV (CM 4500 HV) , PART NO. A06B-6259-H050. MAKE: FANUC ( 1 the number ten for arbitrary powers ), POWER FAILURE BACKUP MODULE 24 HV (PFB-2) , PART NO. A06B-6259-H010. MAKE: FANUC. ( 1 the number ten for arbitrary powers )

MAGAZINE ASSEMBLY 5 ROUNDS TO DRG. NO. TSP-600/5 FOR 30-06 SPORTING RIFLE

LINK ARM PART NO. 5168098, BRACKET AS PER DESCRIPTION AND BILL OF MATERIAL (ENCLOSED) PART NO. 1147781

Solid Carbide End Mill cutter Dia= 4.4mm, FL= 25mm, OAL= 65mm, Shank Dia= 5mm, Tialn/Alcrn/Futura Coated

RCN 2381 16384, EnDat02. . 7KS12 W9 0.00. . T 23F, ID Nr 1244623-01 MAKE: HEIDENHAIN

INCREMENTAL ENCODER 2500 PPR TYPE 6FX2001-3CC50. MAKE: SIEMENS, SINGLE MOTOR MODULE, PART NO. 6SL3120-1TE22-4AD0. MAKE: SIEMENS

ELECTRONIC PRESSURE SWITCH, 0-400 bar 24 V DC Connection G1/4, INDENT NO. 4294637, ALONG WITH SUITABIL

Custom Bid for Services - DESPATCH AND COLLECTION OF NAVAL GUN WITH STAND AND OTHER COMPONENTS ACCESSORIES FROM GSF COSSIPORE TO PXE BALASORE AND BACK TO GSF COSSIPORE TO AND FRO BASIS BY ROAD TRANSPORT EACH TRIP WILL CONSIST ONE OPEN DALA TRU.. Similar Category Goods Transport Service – Per Trip based Service

4100401674 Solid Carbide End Mill Dia 8 MM Flute Length Min 40 MM Overall Length Min. 85 MM No of Cu

SAFETY SWITCH TZ1LE024PGOR8C ID NR - 054964. MAKE: EUCHNER, SAFETY SWITCH TZ1RE024M ID NR - 082051, MAKE: EUCHNER

ROD TO DRG. NO. BOF-4020756.

TOOL NO -12 FOR 155 X 52 CALIBER BR RING (K-9 VAJRA) . TOOL SET CONSISTS OF CERMET TIPED EXPANDABLE R