Advanced Weapons And Equipment India Limited Tender Results

SOLID CARBIDE DRILL LONG SERIES– MICROGRAIN, TIN COATED DIA 8 MM X 117 OAL X 75 FL

SPECIAL GUN DRILL DIA 4.11 MM AS PER DRG NO SKM- 936A. MAKE-GUHRING, GOLE, PRECIHOLE, WIDIA, SANDVIK

SOLID CARBIDE DRILL DIA. 5.90MM-0.020, FL65MM, OAL100MM, SHANK LENGTH 35MM, SHANK DIA. 6MM WITH MULT

SPECIAL GUN DRILL DIA 4.19 MM AS PER DRG. NO. SKM- 936B. MAKE-GUHRING/GOLE/PRECIHOLE/WIDIA/SANDVIK/S

REAMER SOLID CARBIDE DIA 4.0MM DIAMENSSIONS GENERALLY AS PER DRG. NO. TL-3145/19(IC)/20 TIAIN COATED.

BRAZED CARBIDE TIPPED T-SLOT CUTTER DIA 60.0 MM X WIDTH 6 MM X CR 3.0 (BOTH SIDE) X SHANK DIA 10.0 M

GRINDING WHEEL PLAN SIZE- 250 X 25 X76.2 MM GRADE - AA46/54 K V 8 MAKE CARBORUNDUM/NORTON GRINDWEL

COATED SOLID CARBIDE DRILL THROUGH COOLANT DIA- 11.5 mm, SD-12.0MM, FL-55(+/-2.0), OAL-102(+/-5.0) ; TO

AUTOMATIC FULLY MECHANISED ORGANIC WASTE MACHINE FOR COMPOST 325 FOR 50 KGS REPROCESSING CAPACITY.

COATED WIRE HARD ZN. COATED ON SURFACE– TENSILE STRENGTH KG/MM: › 90; ELONGATION% : ‹ 1; SPOOL T

26 TYPES OF GAUGES FOR AK 203 BOLT

Solid Carbide eight(8) fluted helical form cutter dia 38mm as per RFI Drg. No. T-21352. Tialn coated

PLATE HEAT EXCHANGER MODEL: GXD-42 X 69/SS316/NBR Sr. No 2001707 FOR SXK-17 COLD SWAGING MACHINE. MAK

GLOVES RUBBER 15” LONG MADE OF THICK FLEXIBLE RUBBER SINGLE MOULDED WITH FIVE FINGERS SUITABLE FOR M

FORGING OF SLIDE FOR PISTOL AUTO 9MM

BUSHING TO DRG NO. 2A46M. 07-53, DS CAT NO. 5365- 182660 (LAST DC NO. 00 90-AVA, DT. 10.07. 20, GUIDE BUSHING TO DRG NO. 2A46M. 07-52, DS CAT NO. 5365- 182296 (LAST DC NO. 0090-AVA, DT. 1

LEAD ANODE 1200 MM(L) X30 MM THICK WITH 50 MM COLLAR FOR HARD CHROME PLATING., LEAD ANODE 40MM DIA X52'' FOR CHROME PLATING INTERNAL., LEAD ANODE SIZE-1250 MM LENGTH X 40 MM DIA WITH COPPER HOOK SIZE-6 INCH.

LOWER FEEDING CHUTE DESIG AK-630 ASSY 107-1

SCREW FOR T-90 BM4X14 GOST 1478-93 TO DRG. NO. T- 90/35/T-066/1, SCREW FOR T-90 GOST 1477-93 TO DRG. NO. T-90/35/T-074/2, SCREW FOR T-90 GOST 1477-93 TO DRG. NO. T-90/35/T-074/1.

SCREW FOR T-90 BM8X30 GOST 1478-93 TO DRG. NO. T- 90/35/T-066/2, BOSS TO DRG NO. 2A26.10-199, DS CAT NO. 4370-000004 (LAST DC NO. 0029- AVA, DT. 19.12. 2006, BEARING TO DRG NO. 2A46M. 10-70, (LAST DC NO. 0090- AVA, DT. 10.07. 2012, BOLT TO DRG NO. 2A46M. 10-39, DS CAT NO. 1015-012731 (LAST DC NO. 371-A VA, DT. 12.01. 2018), BOLT TO DRG NO. 2A26.10-192, DS CAT NO. 5306- 009778 (LAST DC NO. 1881 4-W, DT. 22.10. 2003

PLATE HEAT EXCHANGER MODEL: GXD-18 X 69/SS316 NBR. FOR SXK-17 COLD SWAGE MACHINE. MAKE: SWEP/TR

RETAINING PIN, FEED STUD TO DS CAT NO. 5315-001526 DC(I) NO. 27426-SA DT- 22.12. 22 IN FINISHED CONDI

INSERT XDKT 11T308

DELTA C DRILL SOLID CARBIDE, THROUGH COOLANT TIN COATED DIA. 11.5 SANDVIK NO. R 415.5-1150-30-AC1 GRAD

LUGGED CARBIDE T-SLOT CUTTER DIA 20 MM X WIDTH 6 MM WITH RADIUS 2 MM ON BOTH SIDE X SHANK DIA 10 MM

S/C REAMER DIA 8.03MM X FL 62MM, X OAL 110MM, SHANK DIA 8MM MULTILAYER TILAN COATED, MICROGRAIN SIZE

S/C HOLE MILL DIA. 12.8 MM, FL-60MM, OAL-100MM, SD- 14MM, T-4 TIALN COATED MAKE: PRIMEPRECISION/GUHRIN

SOLID CARBIDE DRILL DIA 3.0MM AS PER SPECIFICATION DIA 3.0MM FL 28MM X OAL 66 X SD 6.0MM TIALN COATE

SOLID CARBIDE DOUBLE ENDED END MILL CUTTER, DIA 2.96(+ 0.02) FL 17 X OAL 80 X SH. DIA 6.0 X T-4 MAKE-S

SOLID CARBIDE STEP REAMER DIA 4.12MM X FL 40.0MM X Z 4 NO. X DIA 5.45 X 38.0MM, X SH/DIA 5.2MM X OAL

MICROGRAIN LUGGED CARBIDE T SLOT CUTTER DIZE DIA 24MM X THICKNESS 3MM X SHANK DIA 20MM X NECK DIA 9.

MICROGRAIN SOLID CARBIDE HOLE MILL DIA 5.2MM X FL 40MM X OAL 75MM, GRAIN SIZE LESS THAN OR EQUAL TO

S/C REAMER DIA 11.2MM X FL 62 X OAL 110MM, SHANK DIA 12MM, MULTILAYER TILAN COATED, MICROGRAIN SIZE

SOLID CARBIDE DRILL DIA 8.5 X FL-53XOAL-91 S/D-10MM THROUGH COOLANT TILAN COATED MAKE- UNIVERSAL, KA

LOCKING RING/RING RETAINING TO DRG NO. 2A18.17-204, DS CAT 5325-0084 24 (LAST DC NO. 371, SCREW M6X10 GOST 1476-93 TO DRG NO. T-90/35/T-070/1

WIRE. 1-T-12X18H10T GOST: 18143-72

WIRE TO DRG NO WIRE 1-T-12X18H10T LENGTH= 10 M GOST 18143-72/EQV. MATL. -IS 6528-95 GD 04 CR 17 NI 12 M

SIGHT UNIT CASED 102-B TO DRG NO V5/1240-001569 IN F/C

FLASH ABSORBER (WITHOUT PHOSPHATING)

RIB TO DRG. NO. AK-630 102-68 IN F/C, RIB TO DRG. NO. AK-630 102-69 IN F/C, RIB TO DRG. NO. AK-630 102-70 IN F/C, RIB TO DRG. NO. AK-630 102-71 IN F/C, CASTING OF BUSH TO (DRG NO. AK-630 102-61) OF RUSSIAN SPECN. : K 30-IIOST-4365-79/50L, GOST: 977-88. GRADE

S/C END MILL DIA 12 X FL 30 X OAL 75 TIALN COATED. MAKE– MITSUBISHI, SECO, SANDVIK, GUHRING, KENNA

INTERCHANGEABLE CHARACTER TYPES (ASSORTED) FOR ROLLER MARKING SIZE: 2.5MM

FORGING TO DRG NO 64C 1005 200 F3. WITH FIRMS MATERIAL. REQD FOR STRIP C1005

RETAINER AS PER DRG NO. MIM-K-1401-00 FOR TAR - 25

TOOL SET CONSISTS OF KUB PENTRON DRILL DIA 29.50MM WITH ABS50 FOR T90 BR RING AS PER KOMET CODE OR E

MAXIMILL-242 CHAMFER CUTTER

Solid carbide through coolant drill dia 5.25mm X FL 30mm, OAL 65mm, Shank dia 6mm, tialn coated, for

BORON, SILICONE FREE HIGH PERFORMANCE CUTTING FLUID SOLUBLE HAVING FLASH POINT› 140 DegC, DENSITY

ELECTRONIC HANDWHEEL* UNIVERSAL PULSE GENERATOR* 2-CHANNEL* 3.5 METER SPIRAL CABLE* FOR TRANSFER OF

SIMOTICS M COMPACT ASYNCHRONOUS MOTOR 1500 r/min 37 KW 236 Nm. MLFB NO. 1PH81651DF021GA1. MAKE: SIEM