Advanced Weapons And Equipment India Limited Tender Results

RIVET LARGE COUNTERSUNK HEAD TO BOF STD TABLE NO N1-18 TO DESIGANTIN SFN 4X 6 CU, BOLT BANJO CONNECTOR TO DRG. NO. N15-22(6099793), SPRING (FOR HYDRAULIC DRIVE) BOF-6108754

LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION DC(1) NO-26956-SA DT-07/10/2016 DS CAT NO. 1005-0

SPL THREADING TOOL SET FOR 15 MM BUTTRESS AS PER ANNEXURE A. MAKE: SANDVIK/SECO/MOTHERSON/TUNGALOY/C

BRAZED REAMER DIA 40(+ 0.1) MM WITH CORNER RADIUS 1.6MM, FUNCTION LENGTH 180MM, OAL 250MM, SHANK DIA 32

STAY (BOTTOM RIGHT) TO DRG. NO. 1015-000706, STAY (TOP, RIGHT) PART NO. IFL-7576, DS CAT NO. 1015-000707, DC NO. 16095-W, DC DT. 23-12-1983, STAY BOTTOM (LEFT) . TO DRG. NO. 1015-000695

SOCKET BLANKING PLUG TO PART. NO. IAN 283 SA, TRIGGER FIRING TO DRG. NO. IAN 317 SA

SLEEVE TO DRG NO. BOF-6151786, SPINDLE BOF-5049526

RIFLING CUTTER, DRG NO-LGT-0364/1, DRG NO-LGT-0364/2, DRG NO-LGT- 0364/5, DRG NO-LGT-0364/6, DRG NO-0364/3, DRG NO- 0364/7

Custom Bid for Services - ANNUAL MAINTENANCE CONTRACT FOR COMPUTER HARDWARE INSTALLED AT ORDNANCE DEVELOPMENT CENTRE AS PER SPECIFICATION NO 15805 AMC HARDWARE DT 07 01 2026 Similar Category Annual Maintenance Service - Desktops, Laptops and Peripherals

Washer Recessed as per drg. no. 5310-002391

Washer as per drg. no. 5310-001559

Bracket Angle as per drg. no. 5340-015632

CHARGING CARRIER FOR CONTAINER TO RFI SK NO. 6969* - S FOR FLUIDISED BED FURNACES.

Pin Straight Headed as per drg. no. 5315-000979

CYLINDER TO PART. NO. BOF-5050090

INSERT GSFN 3.1 J-R1 IC 328 FOR BLOCK BREECH LMG/RIFLE MAKE-ISCAR/SANDVIK/TUNGALOY TO SUIT ISCAR

CONTAINER TO DRG. NO. AK-630 YA SB 200-1 TR & 200-14 TR.

CARBIDE TIPPID BRAZED T-SLOT CUTTER DIA 60 MM, THICKNESS 6 MM, S/D 25 MM, OAL 100 MM, NO OF TEETH-8

Collar Shaft as per drg. no. 3040-003336

Screw Set as per drg. no. 5305-003141

Nut drg. no. 5310-001464

Nut as per drg. no. 5310-002390

Bush as per drg. no. 1015-002063

Refrigeration Gas Chlorodifluoro Methane Type CFM22 (R-22) asper IS5610: 1983 (Q3)

COVER B LIND, POD FINISHED AS PER DRG. NO. Y25649A-01 FOR PEDESTAL ASSY OF SRCG

INSERT DCMT 11T304-PS FOR STEEL MACHINING, JOB HARDNESS 45-50 HRC.

Manpower Outsourcing Services - Man-days based - Hiring of manpower for Conservancy and cleaning Services Zone B specification NO 03 YARD HMPC CS B Rev 05 2026 dt 31 03 2026; Semi-skilled; Office Supervisor, Manpower Outsourcing Services - Man-days based - Hiring of manpower for Conservancy and cleaning Services Zone B specification NO 03 YARD HMPC CS B Rev 05 2026 dt 31 03 2026; Unskilled; Mazdoor/Labour

SPECIAL GUN DRILL DIA 4.19 MM AS PER DRG. NO. SKM- 936B. MAKE-GUHRING/GOLE/PRECIHOLE/WIDIA/SANDVIK/S

SPECIAL GUN DRILL DIA 4.11 MM AS PER DRG NO SKM- 936A. MAKE-GUHRING, GOLE, PRECIHOLE, WIDIA, SANDVIK

NOSE IN FINISHED CONDITION (WITHOUT PLATING) OF 84 MM TPT TO DRG. NO. F1301- 047062E.

SPARES FOR REVERSE OSMOSIS WATER PURIFIER SYSTEM HIGH PRESSURE PUMP 48V WITH NORMAL FLOW RATE OF 1.

GAUGE ASSEMBLY AS PER DRAWING NO. TEND 141/8143/GAD/1 AND ATACHED AS PER PART LIST TO DRAWING NO., PLUG GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8130/PG/2, PLUG GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8130/PG/3, PLUG GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8130/PG/4, GAUGE AS PER DRAWING NO. TEND/141/8221/G/5, GAUGE AS PER DRAWING NO. TEND/141/8221/G/6, GAUGE AS PER DRAWING NO. TEND/141/8140/G/7, GAUGE ASSEMBLY AS PER DRAWING NO. TEND/141/8368/GAD/9 AND ATTACHED AS PER PART LIST TO DRAWING NO., GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8154/G/11, PLUG GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8134/PG/12, GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141 8154/G/13, PLUG GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8130/PG/14, GAP LIMIT GAUGE AS PER DRAWING NO. TEND/141/8102/GLG/16, GAP LIMIT GAUGE AS PER DRAWING NO. TEND/141/8113/GLG/17, GAP LIMIT GAUGE AS PER DRAWING NO. TEND/141/8113/GLG/18, PLUG GAUGE AS PER DRAWING NO. TEND/141/8130/PG/21, PLUG GAUGE AS PER DRAWING NO. TEND/141/8130/PG/22, PLUG GAUGE AS PER DRAWING NO. TEND/141/8130/PG/4A, PLUG GAUGE AS PER DRAWING NO. TEND/141 8130/PG/3A, PLUG GAUGE AS PER DRAWING NO. TEND/141/8130/PG/3B, LENGTH GAUGE (WORKER'S) AS PER DRAWING NO. TEND/141/8166/LG/23, GAUGE AS PER DRAWING NO. TEND/141/8154/G/24

HEAD TYPE THREAD MILL M22X2.5MM WITH CARBIDE SHANK, MAKE- TUNGALOY/SECO/MOTHERSON/SANDVIK/WALTER AS

FLSPL POWERPACK- 1617348

Manpower Outsourcing Services - Man-days based - Others; Unskilled; Mazdoor/Labour, Manpower Outsourcing Services - Man-days based - Others; Unskilled; Sweeper, Manpower Outsourcing Services - Man-days based - Others; Semi- skilled; Mali/Gardner Helper

ELECTROSTATIC AIR CLEANER ELBARON. . RON/A 60 D-1V EC-DUPLEX INCOMPLET WITH 1 ELECTROSTATIC FILTER

COOLING TANK TO DRG. NO. SB 117/50 WITHOUT PUMP VK524 A-T2, ELECTRIC MOTOR DM 132 SV-40 M5 380 V, 55 KW

EJECTOR (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM

PLATE LOCKING (THROUGH MIM ROUTE) FOR PISTOL 9MM

LEVER SLIDE LOCKING (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM

CATCH MAGAZINE (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM

PLATE HEAT EXCHANGER MODEL: GXD-42 X 69/SS316/NBR Sr. No. 2001707 FOR SXK-17 COLD SWAGING MACHINE, MA

SUPPORT TO DRG NO. 2A46M. 10-64 (LAST DC NO. 0090- AVA, DT. 10.07. 2012)

Manpower Outsourcing Services - Minimum wage - Unskilled; Middle School; Others, Manpower Outsourcing Services - Minimum wage - Semi-skilled; Middle School; Others, Manpower Outsourcing Services - Minimum wage - Skilled; High School; Others

R390-016A16-11L OR EQUIVALENT SIMILAR TOOL INDEXABLE END MILL DIA. 16 MM. MAKE- SANDVIK/ISCAR/KENNAME, R390-11 13 08M-PM 1030 OR EQUIVALENT SIMILAR TOOL MODERN MILLING INSERT. MAKE-SANDVIK/ISCAR/KENNAME

OPEN FORGING TO DRG. No. TEND 1831* 2 REQUIRED FOR BREECH (C 2001) (30MM CANNON)

PROTECTIVE RING FOR BANDS TO DRG. NO. SK-7723/A

AXLE AS PER DRG. NO. 675-51-410., PIN SHOULDER HEADLESS TO DRG. NO. 5315-050356/675-51-175., PIN STRAIGHT HEADED TO DRG. NO. 5315-042756/675-51-267. AS PER DRG MATL-STEEL 45XROCT 4543-71. INDIGENO, PLATE INSTRUCTION AS PER TO DRG. NO. 675-51-62., SCREW BM4 8h. 6hX 8.66. 016 (REF. SPECN. GOST 1491-80) 675-51-CB-179 SHT2 SL. NO. 27INDIGENIOUS EQUIVALENT, SCREW, B1M3-8h. 6hx6.48-016 TO SPECN GOST-17473-80 MATL BS: 970 PT-1-83 GD 070M20 CONDITION ROLLED OR I

CARTRIDGE 7.62X39 MM HIGH PRESSURE PROOF FOR BARREL OF AK -203

50 MM HIGH FEED ARBOR MOUNTED THROUGH COOLANT FACE MILL CUTTER WITH 100X(NUMBER OF POCKETS IN THE CU