Air Force Station Bihta Bihar Tender Results

OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number Samsung MLT-D1043S Black Toner Cartridge * Corresponding Part number/code MLT-D1043S/XIP * Printer Model number/numbers for which Cartridge is suitable ML-1660, ML-1666, ML-1 670, ML-1675, ML-1860, ML-1865, ML-1865W, SC X-3201, SCX-3206W * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & 1500 * 1/2 ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 10 15

OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Magenta * Ink/Toner/Drum Model number HP 125A Magenta Original LaserJet Toner Cartridge * Corresponding Part number/code CB543A * Printer Model number/numbers for which Cartridge is suitable HP CLJ CM1312 MFP Printer, HP CLJ CM1312nfi MFP Printer, HP Color LaserJet CP1215 Printer, HP Color LaserJet CP1515n * 1/2 Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1400 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 1 15

t shirts T Shirts ( 240 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Utility T Shirt utility Unisex * Dimensions Size Assorted sizes ( Small, medium, Large, Extra Large and Double Extra Large ) as per buyers requirements Assorted sizes ( Small, Extra Large and Double Extra Large ) as per buyers requirements Length of T Shirt (cm) 74 ( Medium ) 72 ( small ), 74 ( Medium ), 76 ( Large ), 78 ( Extra Large ), 80 ( Double Extra Large ) Width Across Chest (cm) 52.5 ( Medium ) 50 ( Small ), 52.5 ( Medium ), 55 ( Large ), 57.5 ( Extra Large ), 60 ( Double Extra Large ) MATERIAL Knitting interlock knitted Plain ( Single Jersey ) Knitted, interlock knitted Material ( Composition ) Polyester Polyester, mercerised, combed cotton, Polyester-42± 2% And Cotton-58± 2%, 1/5 Polyester-42± 2%, Cotton-53± 2% And Lycra- 5± 1%, Polyester-67± 2% And Cotton- 33± 2% Count of Yarn (Ne) As per requirements * Mass of Material (g m²) 180 160, 180, 200, 220, 240 PATTERN Neck Type With Collars and Buttons V- Neck, Round Neck, Polo Neck, With Collars and Buttons Sleeve Type Raglan * Sleeve Half Sleeve Half Sleeve, Full Sleeve Sleeve Length (cm) 24 ( medium, half sleeve ) 23 ( small, half sleeve ), 24 ( medium, 25 ( Large, 26 ( Extra large, 27 ( Double Extra Large, 60 ( Small, Full Sleeve ), 61 ( Medium, 62 ( Large, 63 ( Extra Large, 64 ( Double Extra Large, Full Sleeve ) Pocket With Pocket With Pocket Size and position of pocket ( in case of T Shirt with Pocket ) ( Width X depth ) 11 cm X 13 cm, left side * Number of Buttons in T Shirt with Collor 2 * Side Slit With * Depth of side slit ( in case of T Shirt with Side Slit ) (cm) 5cm * COLOUR/DESIGN Colour/design As per buyers requirements As per buyers requirements Colourfastness to Washing ( IS/ISO 105-C10, Test- C (3)) Change in Colour- 4; Staining of Adjacent Fabric- 3-4 * Colourfastness to perspiration ( IS 971 ) 4 * Colourfastness to Rubbing ( IS 766) Dry- 4/Wet- 3 * Colourfastness to Light 5 * 2/5 ( IS 2454 ) OTHER REQUIREMENTS Neckline binding Rib knitted fabric Rib knitted fabric, Self material Bottom Hem Rib knitted fabric Rib knitted fabric, Self material Sleeve end Binding Rib knitted fabric Rib knitted fabric, Self material Depth of hemming/binding at neckline, sleeve end and bottom binding ( min ) 2.5 * Construction of Rib Knitted fabric ( in case Rib knitted fabric is used for neckline, sleeve end and bottom binding ) 1 X 1 rib knitted fabric * Composition of Rib Knitted fabric ( in case Rib knitted fabric is used for neckline, sleeve end and bottom binding ) Same as that of body material Same as that of body material, Cotton- 97 % and Lycra- 3%, Polyester- 95% and Lycra- 5%, Not applicable Pilling Resistant (after 5 hours Test as per IS 10971 (Part 1)), min 4 * Dimensional stability to washing, Shrinkage or Elongation Percentage, max ( IS 2977), in lengthwise and widthwise direction 3 * Spirality, percentage, max ( After one wash ) ( IS/ISO 16322-1:2005 ) ( Washing as per ISO 6330-2A at 60 degree C +/- 4 * Logo to be printed as per buyer's requirements true true, false Label with Tag * TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. true true, false 3/5 Name of the Lab N/A * Address of The Lab N/A * Test Report No. N/A * Test Report Date N/A * Test reports to be furnished to buyer on demand, if claimed to be available Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Y Ashok Kumar 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 240 20

Printer, Printer Printer ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specifications Printing Technology inkjet inkjet Cartridge Technology Ink Ink Type of printing mono mono Paper Size A4 A4 Print Speed (A4) - Mono (PPM) 34 34 Print Speed (A4) - Color (PPM) 0 Any applicable numeric value Resolution (Dpi) 1440 * Memory (MB) 0 * Hard Disk Capacity (GB) 0 * Processor Speed (Mhz) 0 * Duplexing Feature No * Duplex Print Speed (PPM/IPM) 0 Any applicable numeric value 1/5 Network Connectivity yes * Network Interface, if available Ethernet 10/100 * Wireless Connectivity No * If Yes, Type of Connectivity NA * USB Port yes * Paper Tray Capacity 100 * Number of Paper Trays 1 * Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 6000 * Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 0 * Duty Cycle/month (No of Prints) 5000 * Operating Temperature Range (Degree C) 50 * Operating Humidity (RH) (In %) 80 * Dimensions(In mm x mm x mm ) 148X267X435 * Weight (In kg) 3.4 * BIS Registration under CRS of Meity Yes * BIS Registration no - * On site OEM warranty (Years) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar Bishnoi 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 5 15 Printer ( 3 ) Technical Specifications 2/5 * As per GeM Category Specification Specification Specification Name Values Allowed Values Specifications Printing Technology inkjet inkjet Cartridge Technology Ink Ink Type of printing Colour Colour Paper Size A4 A4 Print Speed (A4) - Mono (PPM) 33 33 Print Speed (A4) - Color (PPM) 20 20 Resolution (Dpi) 4800 x 1200 dpi * Memory (MB) 0 * Hard Disk Capacity (GB) 0 * Processor Speed (Mhz) 0 * Duplexing Feature yes * Duplex Print Speed (PPM/IPM) 0 Any applicable numeric value Network Connectivity yes * Network Interface, if available Ethernet 10/100 * Wireless Connectivity yes * If Yes, Type of Connectivity Wi-fi Direct * USB Port yes * Paper Tray Capacity 150 * Number of Paper Trays 1 * Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 10000 * Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 0 * Duty Cycle/month (No of Prints) 0 * Operating Temperature Range (Degree C) 35 * Operating Humidity (RH) (In %) 29 * 3/5 Dimensions(In mm x mm x mm ) 515 x 360 x 205 mm * Weight (In kg) 6.6 * BIS Registration under CRS of Meity Yes * BIS Registration no - * On site OEM warranty (Years) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar Bishnoi 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 3 15

Multimedia Projectors

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 16 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single Phase Quasi-Sin- wave 230 V AC, 50 Hz Single Phase Quasi-Sin- wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 70% >/= 70% Warranty for the battery from the date of delivery 1 year 1 year Warranty for Line Interactive UPS 2 Years 2 Years Installation and commissioning instructions No * 1/4 CONSTRUCTIONAL Type of enclosure ABS * AC out put for printer (not through inverter) Yes Yes Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * Protection for over voltage and over load Yes * REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 Yes * 2/4 pt-5/sec-1 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 16 15

acute care monitoring units and related products- patient monitors Acute Care Monitoring Units And Related Products-patient Monitors ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values NEW SET Type of Monitor Preconfigured/Non Modular * Functional Requirements: Operates from mains voltage or from internal rechargeable battery Operator can set audio visual alarm levels for low or high levels of each parameter independently Allows display of single, 3 lead ECG or simultaneous display of at least 5 waves ECG selected from up to 12 points Display to be digital of all active parameters and trace display for at least three selectable parameters Yes * Clinical Purpose: YES * 1/7 Designed to continuously measure and display multiple vital physiological parameters of adults, newborn and premature infants, especially those under critical care Continuous display on screen of neonatal or infant ECG, respiration and heart rates, invasive/non-invasive blood pressure, body temperature and SpO2 Yes * Patient monitor offered with option to monitor parameter(s): IBP EtCO2, IBP, Cardiac Output Number of leads for ECG 5 5, 3 Screen Size 8 8.0 Weight 6 * ECG patient connectors that are sterilisable and reusable are acceptable though reusable cables that attach to disposable connection patches are preferred Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time Temperature probe to be reusable, external skin contact type; Temperature range at least 30 to 40 deg C, minimum gradation (1/10) deg C/Heart rate measurement range to be at least 30 to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm/SpO2 measurement range at least 40-70 % and 70 to 99 %, with accuracy better than ± 1% for Yes * 2/7 40-70 range and better than ± 3% for 70-99 range and minimum gradation 1%/Blood pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 mmHg Respiration rate measurement range at least 0 to 100 bpm, minimum gradation 1 bpm/Trend display of each parameter over at least previous 24 hours to be selectable ECG patient connectors that are sterilisable and reusable are acceptable though reusable cables that attach to disposable connection patches are preferred Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time Temperature probe to be reusable, with accuracy better than ± 1% for 40-70 range and better than ± 3% for 70-99 range and minimum gradation 1%/Blood pressure monitoring range at least 30 to 300 mmHg, true * 3/7 minimum gradation 1 bpm/Trend display of each parameter over at least previous 24 hours to be selectable/TFT Screen User Interface Manual through knob or key board Manual through knob or key board, Through touch Screen, remotely operated Audio Visual alarms high and low levels for each parameter (operator variable settings), sensor/wire probe disconnected, low battery * Case is to be hard and splash proof/Display must allow easy viewing in all ambient light levels/Cable connectors to be designed so as fit correct socket only Yes * Noise (in dB) < 50 * Heat Dissipation: Should maitain nominal Temp and the heat should be disbursed through adequate arrangement * Mobility & Portability mobile and portable in protective case supplied for clean storage and safe transport. * Power supply Replaceable And Rechargeable Battery Operated (Min One Hour Operation Support In The Event Of Power Failure) and 220 Volt, 50 Hz AC both Replaceable And Rechargeable Battery Operated (Min One Hour Operation Support In The Event Of Power Failure) and 220 Volt, 50 Hz AC both Mains cable to be at least 3m length YES * Accessories & Spare Parts: pairs of ECG cable 5 sets of ECG connection electrodes 1 unit each of reusable SPO2 probe(Adult/Paediatric) 1 unit of SPO2 probe(Neo natal) 2 units of NIBP cuffs for adult 2 units of NIBP pairs of ECG cable 5 sets of ECG connection electrodes 1 unit each of reusable SPO2 probe(Adult/Paediatric) 1 unit of SPO2 probe(Neo natal) 2 units of NIBP cuffs for adult 2 units of NIBP 4/7 cuffs for Paediatric 1 unit each of skin and rectal Temperature probe cuffs for Paediatric 1 unit each of skin and rectal Temperature probe Operating condition: apable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances * Should be FDA CE/BIS approved product BIS US FDA, European CE, BIS - Electrical safety conforms to standards for electrical safety IEC-60601-1/- Shall meet IEC-60601-1-2 (General requirements for safety - electromagnetic compatibility)/-Also conforms to IEC 60601-2- 27 (Particular requirements for the safety of electrocardiographic monitoring equipment) - Manufacturer supplier should have ISO certificate for quality standard/- Shall meet IEC 60601-2-49 multi function patient monitoring equipment standard requirement Yes * Seller to perform supply, installation, safety & operation checks and training before handover of the product [Training of users in operation and basic maintenance shall be provided] Yes * Warranty Comprehensive warranty of 3 years with free servicing ( min 3/year) during warranty * Operating manuals, service manuals, other Advanced maintenance tasks required shall be * 5/7 manuals/documents documented User, technical and maintenance manuals to be supplied in English language. List to be provided of equipment and procedures required for local calibration and routine maintenance List to be provided of important spares and accessories, with their part numbers. Certificate of calibration and inspection to be provided. Recommendations or warnings Any recommendations for best use and supplimentary warning for safety to be declared * Details of Item and test reports Availability of Test Report from Central Govt/NABL/ILAC/Any OPCW accredited lab to prove conformity to specification YES * Test report (if indicated as available) to be furnished to buyer on demand YES * Test report No & date A28251 DT 26/05/2016 * Name and address of the Lab: UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096 USA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ayush Khetan 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 1 15

lead acid battery Lead Acid Battery ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 100 100, 100.0 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Uncharged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * 1/3 Volume of Electrolyte (ml) 5000 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab Chennai * Name of the Lab ETDC Chennai * Test Report No. ETDC(CN)2002/966 * Test Report Date 27.08.2002 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications IS16046 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 30 15

lead acid battery Lead Acid Battery ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 180 180, 180.0 Warranty (Years) 3 Years 3 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 15900 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - 1/3 No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab VSI ESTATE THIRUVANMIYUR - Name of the Lab ETDC - Test Report No. 71920 - Test Report Date 01/04/2015 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 4 15

Automotive vehicles tubes for pneumatic tyres Automotive Vehicles Tubes For Pneumatic Tyres ( 34 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Tubes For type of Pneumatic tyres Normal Road Tyre - Conformity to Indian Standrad for Pneumatic Tubes IS : 13098 latest for Automotive tubes for pneumatic tyres - ISI MARKED (for Tubes) yes yes CM/L No and validity date - - Type of Tubes Class - A - Material Used - - Thickness uniformity of Tubes yes yes Manufacturers name and Brand Name - - Tyre -Size Designations for which tube applicable 3704253 - Tube -Size Designations TUBE INNER 7.50X16 - The tubes manufactured from an appropriate rubber compound and Yes - 1/3 vulcanized to an end less annular ring shape A valve or spud conforming to IS 9081. Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. Yes - Test cetificate No. - - Test Report Date - - Name and address of the Lab where test Conducted. - - Others Certificate ie ROHS, WHO, GMP, ISO etc. - - Warranty Time(Year)s 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 34 15

automotive vehicles pneumatic tyres, automotive vehicles pneumati Automotive Vehicles Pneumatic Tyres ( 34 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre Tyres Without Tube Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres - - ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube NA for Tubeless and without tube - 1/7 Manufactures name and Trade Name - - Tyre-size Designations 7.50-16 PR RIB - Tube-size Designations NA for Tubeless and without tube - Structure of Tyre Bias-belted Diagonal or bias ply, Bia s-belted, Radial, Reinforc ed or Extra Load Ply Rating 16 - Speed Category - - Load indicas - - Side Well (mm) 20 - Inner area of Tyers (mm) 212 - Section Width (min)(mm) 212 - Overall Width (max)(mm) 825 - Section Height (mm) 190 - Nominal Aspect Ratio(mm) 1 - Outer diameter (min)(mm) 787 Nominal Rim Diameter(mm) 160 Maximum load Rating(%) 7.75 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. YES - Test cetificate No. - - Test Report Date - - Name and address of the Lab where test Conducted - - Others Certificate ie ROHS, WHO, GMP etc - - 2/7 Warranty Time 1 1.0 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 34 15 Automotive Vehicles Pneumatic Tyres ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre Tyres Tubeless Tubeless Conformity to Indian Standrad for Pneumatic Tyres IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube NA for Tubeless and without tube - Manufactures name and Trade Name - - Tyre-size Designations 235/70R16 - Tube-size Designations NA for Tubeless and without tube - Structure of Tyre Radial Radial Ply Rating NA FOR TUBELESS TYRES - 3/7 Speed Category - - Load indicas - - Side Well (mm) 168 - Inner area of Tyers (mm) 112 - Section Width (min)(mm) 240 - Overall Width (max)(mm) 736 - Section Height (mm) 178 - Nominal Aspect Ratio(mm) 16 - Outer diameter (min)(mm) 736 Nominal Rim Diameter(mm) 16 Maximum load Rating(%) 925 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, GMP etc - - Warranty Time 1 1.0 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar Pandey 801103, AIR FORCE STATION BIHTA NEAR MUSEPUR 1 15 4/7 Automotive Vehicles Pneumatic Tyres ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Without Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles-Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles-Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube NA for Tubeless and without tube - Manufactures name and Trade Name - - Tyre-size Designations 1200x20 - Tube-size Designations NA for Tubeless and without tube - Structure of Tyre Reinforced or Extra Load Diagonal or bias ply, Reinforc 5/7 ed or Extra Load Ply Rating 18 - Speed Category - - Load indicas - - Side Well (mm) 325 - Inner area of Tyers (mm) 22.5 - Section Width (min)(mm) 312 - Overall Width (max)(mm) 12 - Section Height (mm) 20 - Nominal Aspect Ratio(mm) 20 - Outer diameter (min)(mm) 1135 Nominal Rim Diameter(mm) 8.5 Maximum load Rating(%) 3725 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, GMP etc - - Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arun Kumar 801103, AIR FORCE STATION 9 15 6/7 Pandey BIHTA NEAR MUSEPUR