Loading
Loading…
Loading…
35 results • Latest
ACRYLIC SEALANT (WATER BASED / FIRE REDARTANT / WHITE COLOUR) MAKE : ANABOND 777R - 500g / PYROPLEX - 450g / ESSOR BOND - FR 506 - 450g or similar for Vande Bharat Coaches.
MOULDED CASE CIRCUIT BREAKER (MCCB) 63A, 4POLE, 415V, 50HZ , BREAKING CAPACITY 10KA, CONFORMING TO IS 13947-2 IEC 60947-2 SUITABLE FOR LHB HOT BUFFET CAR PANTRY EQUIPMENT AS PER RCF SPECN. EDTS 118 REV. E OR LATEST. ACCEPTED MAKES: L&T, SCHNEIDER, SIEMENS
ROTARY SWITCH ASSEMBLY COMPLETE AS PER ICF DRAWING NO. ICF/SK3-7-2-081 (LATEST) FOR VANDE BHARAT CHAIR CAR RAKES.
ROTARY CAM SWITCH 25 AMP 440 V AC 4 POLE 3 WAY 4 POSITION WITH OFF AS PER SR. NO. - 4 OF BOM OF SPEC.NO.- EDTS-006. ACCEPTED MAKE :- SALZER (L&T) AND KAYCEE ONLY.
Male elbow connector 1" OD X 3/4" BSPT(M) as per Drawing No ICF/STD 3-5-023 ITEM-3, Alt -j & as per ICF Spec: ICF/MD/SPEC-166, Issue Status-01, Rev. 04 of 28.08.2019.
LED Light Fitting for Lavatory 2.5 W, as per ICF Dwg No. TS/MC-7-6-022 suitable to VB rakes as per RDSO SpecificationNo. RDSO/PE/SPEC EMU/0196-2019(Rev.0) along with latest Annexure and Addendum /Corrigendum.
DC TO DC CONVERTER FOR SWITCH BOARD CABINET OF LHB AC COACHES - 110/24 V, 1.5 A AS PER SR. NO. - 61 OF COMMON BOM ( RDSO L. NO. EL/7.1.108/MSSBC DT 17/09/21)
LATCH FOR EVAPORATOR CHAMBER COVER OF RMPU MADE UP OF SS304 FOR LHB AC COACHES. CONFIRMING TO RDSO SPEC. NO.- RDSO/PE/SPEC/AC/0061-2005 (REV- 1)
POWER CONTACTOR [WITH DIODE] FOR COMPRESSOR UNIT OF LHB TYPE AC COACHES ,3 POLE, RATED CURRENT- 32 A (AT RATED VOLTAGE & AC-3 UTILIZATION CATEGORY), RATED VOLTAGE690 V, COIL VOLTAGE 77-143 VDC, WITH SURGE SUPRESSOR, WITH 1 NC AUX CONTACT, CONFIRMING TO RDSO SPEC NO. RDSO / PE / SPEC / AC / 0184-2015 (REV2), SUITABLE FOR LHB TYPE AC COACHES SWITCH BOARD CABINET [PLACE OF INTALLATION- S1K33, S1K34, S1K38, S1K39]. ACCEPTED MAKE & CAT NOS.: - AS PER SR. NO. 60 OF COMMON BOM OF RDSO LETTER NO. EL/7.1.108/MSSBC DATED 17.09.21 OR ANY OTHER MAKE WITH PRIOR APPROVAL OF RDSO.
INTEGRATED TEST BENCH FOR AIR SPRING SUSPENSION CONTROL EQUIPMENT ( LEVELING VALVE AND DUPLEX CHECK VALVE) AS PER SPECIFICATION ATTACHED.
FUEL FLOW METER FOR KIRLOSKAR (KOEL) MAKE POWER CAR AS PER ANNEXURE - 'A'
Supply of air bellow duct set, Each set of air bellow ducts consisting of : 01 no of supply air bellow duct, 02 nos. of fresh air bellow ducts & 2 nos return air bellow ducts .The bellow ducts should be made of meta aramid/para aramid fabric with silicon rubber coating on both sides and the Metallic frames at both ends of the ducts i.e. RMPU side & coach shell side, shall be as per RDSO Specification No. RDSO/PE/SPEC/AC/0197-2020 (Rev.-0) & RDSO drawing No. RDSO/PE/SK/AC/0069-2004 (Rev.3) or latest, Suitable for use in LHB RMPU type AC RMPU.
HEAVY DUTY SEWING MACHINE Waking foot top and bottom feed motorized rexine stitching lock stitching machine with automatic lubrication ,detail annexure of machine attached in annexure -A
WASTE COTTON WHITE TEASED NO. 2 FOR CLEANING MACHINARY TO SPECIFICATION NO. G/TEX/C/52/B . PACKING CONDITION:-MATERIAL SHOULD BE PACKED 50 KGS PER BALE.
Oil cutting soluble to IS:1115/1986 Amndt. No. 1, with bactericide test with RDSO additional requirement as slip no. 1 issued by RDSO as on August 2016.
HRC Cylindrical fuse link 4A (Without holder), 1.2kV, Size 50&8MM for voltage control and item code F01 to F06 and place of installation in Switch Board Cabinet S1F90 to S1F96, as per RDSO specification No. RDSO/PE/SPEC/AC/0184- 2015 (Rev-1) used for voltage control, confirming to RDSO spec No. RDSO/PE/SPEC/AC/0184-2015 (Rev-1) Suitable for LHB type AC Coaches (S1F90, S1F-91, S1F-93, S1F94, S1F-95, S1F-96)", Accepted Make as per Sr. No. 13 of Annexure of RDSO letter no. EL/7.1.108/MSSBC, dated 17.09.2021 or any RDSO approved make. RDSO specification No. RDSO/PE/SPEC/AC/0184-2015 (Rev-1) Accepted Make as per Sr. No. 13 of Annexure of RDSO letter no. EL/7.1.108/MSSBC, dated 17.09.2021 or any RDSO approved make. ACCEPTED MAKE- EATON, BUSSMAN, SIBA,WOHNER AND FERRAZ Only.
50 MILLIMETER BRASS SOLID GATE VALVE AS PER IS:778/1984 AMNDT-4.
Double Sealed Window Unit with Polycarbonate Sheet and Toughened Glass (for RTDC coaches) to size: 600x980x25.5 mm. to Drg. no. WRCTAC 1-5-4-003 Alt. "d", Col. V with Sealing Rubber to Drg. no. WRCTAC 1-5-4-006 Alt. "a".
BSS Bracket on Bogie frame to ICF's drg. No.T-0-3-622,alt-q/10.Matl. & Specn: As per drawing with latest specification.
Circlip A-115 For Modified Axle Box Guide Arrangement to ICF drg. no. ICF/SK-0- 1-182 Alt.e. Item no. 3. Matl.&Spec. As per drg.
SLIDE PLATE FOR BEARING BRACKET FOR SCHAKU COUPLER TO DRG.NO. 40.524.07.7(4) OR EQUIVALENT, AS PER RDSO SPECIFICATION-61- B-36/REV 68-1
Adjusting shim ( LHB ) for coaches to drg. no. 1272066 Ver.-00.Matl.&Spec. As per drg.
Disk Lock Washer M 24 as per RDSO drg. No. SK-98145 Alt-12 Item No. 20 & ICF Individual Drawing No. ICF/STD-2-2-009 Alt j. Matl.& Spec. As per drg. (Acceptable Make-Disc lock/Nord lock/Durlock/Gallock)
Sealing O-ring 35502000 for LHB coaches to RCF drg.no. LW01001 Alt. e, item no.24. Matl. & Spec. As per drg.
RUBBER KIT FOR FIBA FTRTIPL PART NO. FT0050801-K00 FOR LHB COACHES, CONSISTING OF 13 ITEMS. AS PER ANNEXURE ATTACHED.
HERMETICALLY SEALED COMPRESSOR MODEL NO. ZR81-KCE-TFD- 522 415V, ACCEPTED MAKE- EMERSON ONLY.
FLAT MOULDING SIZE 1.6 X 25 MM X 2500 MM LONG TO ICF DRG. NO. ICF/STD - 4-3-007 ALT. m , ITEM NO. 1 AND DISTANCE BETWEEN CENTRE OF HOLE TO HOLE PITCH TO BE 150 MM, SIZE OF HOLE DIA 5 MM, INITIAL HOLE CENTRE DISTANCE FROM END OF MOULDING IS 20MM [BOTH SIDE]
Handle for Vestibule Sliding Door of LHB coaches to drg. no. LW 56362 Alt. Nil. Material & Specification as per drawing.
Decorative Thermosetting synthetic Resin Bonded Laminated Sheet for use in coaching stock Size 2440x1220x3mm, colour star dust grey to RDSO Spec. no. C- K514.
Control Arm Lubricant 'BLASOL 135 ' solution equivalent to cortec VCL-368 and molytec EP as per para 4.3.2.12.1 of camtech maintenance manual (2022-23)
KIT SET OF FILTER & CHECK VALVE FOR ESCORTS MAKE LHB COACHES. (1) REPAIR KIT FOR AIR FILTER CONSISTING OF 04 ITEMS AS PER ANNEXURE-A TO ESCORTS DRAWING NO- 3EB 5655. (2) REPAIR KIT FOR CHECK VALVE ASSEMBLY CONSISTING OF 03 ITEMS AS PER ANNEXURE-B TO ESCORTS DRAWING NO.4EB 5664. Spec:RDSO/2011/CG%B704 (Rev.04)
HEATING ELEMENT (BURNER) RING TYPE 2.0 KW, 230V AC, AS PER RCF SPECIFICATION NO. EDTS-118 REVISION- E, AMENDMENT NO. 2 WITH CORRIGINDUM NO. 3 AND RCF DRAWING NOLH72215 (ALTERATION-E) THE MINIMUM IR VALUE OF HEATING ELEMENT SHOULD BE 2M OHM, AS PER IS: 4159. SUITABLE FOR USE IN LHB TYPE HOT BUFFET CAR (PANTRY CAR).
Bolt, Nut and Washer for fitment of anchor link to ICF drg. no. T-0-7-613 Alt. Nil. Item 2 , 3 & 4. Matl. & Spec. As per drg.