Bharat Heavy Electricals Limited Tender Results

AUTOMATIC GROOVE RING

SEALING RING 180X200X10 VAR. 03 (HW-287.94) -- ITEM AS PER DRG. 31230401037 REV. 04 WITH MATL. AS PER, SEALING WASHER (HW-397.75) -- ITEM AS PER DRG. 41393501027 REV. 04 WITH MATL. HW25693 REV. 02

SYNCHRONOSCOPE 2 Deg. 144X144MM 144-DFS, MAT CODE: CU7341795050, AC DOUBLE FREQUENCY METER; REED TYPE, mat code: HC0694530204

BKSE000373

FABRICATION OF ROTOR LIFTING EQUIPEMENT

BEETEL Backlit Display ABS Telephone Instrument One Plus One (Seretary Phone)

STARTING DIESEL ENGINE 630HP 2100 RPM

W95310521020 DRG: 41052156998 REV: 00 FORGE RING FOR ANGLE RING OF DIAGONAL STAGE-HPT SPEC: HW19390, W95310525050 DRG: 41052556996 REV: 00 FORGING FOR PISTON RING OD 833 X ID 770 X 18 THICK MATERIAL: X, W95310528075 DRG: 41052856993 REV: 01 FORGING FOR RING SEGMENT IN SIX PARTS SPEC: HW19390 REV: 04, W95310528083 DRG: 41052856992 REV: 01 FORGING FOR RING SEGMENT IN SIX PARTS SPEC: HW19390 REV: 04, W95310528091 DRG: 41052856991 REV: 01 FORGING FOR RING SEGMENT IN SIX PARTS SPEC: HW19390 REV: 04, W95310528105 DRG: 41052856990 REV: 01 FORGING FOR RING SEGMENT IN SIX PARTS SPEC: HW19390 REV: 04, W95310528121 DRG: 41052856988 REV: 01 FORGING FOR RING SEGMENT IN SIX PARTS SPEC: HW19390 REV: 04, W95310528130 DRG: 41052856987 REV: 01 FORGING FOR RING SEGMENT IN SIX PARTS SPEC: HW19390 REV: 04, W95310528164 DRG: 41052856994 REV: 00 FORGING FOR SEALING RING MATERIAL AS PER HW19390 SPEC: HW193, W95310529055 DRG: 41052956996 REV: 00 FORGING FOR SEALING RING MATERIAL AS PER HW19390 SPEC: HW1939, W95310529063 DRG: 41052956995 REV: 00 FORGING FOR SEALING RING MATERIAL AS PER HW19390 SPEC: HW193, W95310529071 DRG: 41052950999 REV: 00 FORGING FOR SEALING RING MATERIAL AS PER HW19390 SPEC: HW1939, W95310529080 DRG: 41052950998 REV: 00 FORGING FOR SEALING RING MATERIAL AS PER HW19390 SPEC: HW193, W95310529039 DRG: 41052956997 REV: 01 FORGING FOR SEALING RING SPEC: HW19390 REV: 04, W95310625070 DRG: 41062556991 REV: 00 FORGING FOR THREADED RING (ROUGH MACHINED) SPEC: HW19386 REV, W95310625089 DRG: 41062556992 REV: 00 FORGING FOR SEAL RING (ROUGH MACHINED) SPEC: HW19390 REV: 04, W95310625127 DRG: 41062558999 REV: 00 FORGING FOR ANGULAR RING (ROUGH MACHINED) SPEC: HW19390 REV, W95310625135 DRG: 41062558998 REV: 00 FORGING FOR THREADED RING (ROUGH MACHINED) SPEC: HW19386 REV, W95311320206 DRG: 41132056997 VAR. 00 REV: 00 FORGING FOR RING SPEC: HW19390 REV: 04, W95310505237 DRG: 41050509996 REV: 00 FORGING FOR SEALING RING SPEC: HW19388 REV: 02

MECHANICALLY ACTUATED DIRECTIONAL CONTROL VALVE ASSEMBLY AS PER DRG AND SPEC

ROUND POLYSTER SLING SWL 1 TON, ROUND POLYSTER SLING SWL, STEEL WIRE ROPE SLING DIA 22 MM X 10 M LONG, STEEL WIRE ROPE SLING DIA 36 M X, STEEL WIRE ROPE SLING DIA 36 MM, WIRE ROPE SLING ASSY AS PER DRG. NO 32045122101, WIRE ROPE SLING ASSY AS PER DRG NO 32045118612

Supply of P91 Fittings - Suhani Alloys Pvt ltd

SPARES FOR COOLING TOWER FAN ASSEMBLY

Portable XRF Analyser (Details as per Buyer specification documents)

Annual Maintenance Contract for Removal of MS Chips Scrap from factory production blocks inside factory area

W90414900952 SAFETY VALVE FLANGED-5 SPEC: TG60114 REV: 01 SIZE: NB= 32, NP= 6, W90415301084 FULL LIFT SPRING LOADED RELIEF VALVE STAINLESS STEEL VAR-1 SPEC: TG60299 REV: 06 SIZE:, W90414900855 SAFETY VALVE SCREWED-1 SPEC: TG60114 REV: 01 SIZE: NB= 6, NP= 70

F9AZS00120-Bore Machining of FA1B75 Booster Pump Casing

ELEC. CARD-CONTROL-ACTR-AUMA-K216.957 (Material Code - 969991150430)

BALL BEARINGS and NEEDLE ROLLER BEARING

LSEFFGG 32 X995X6000, LSEFFGG 32 X515X6000

Supply Installation Testing and Commissioning of Air

TUBULER HEATER LENGTH 1375 MM, 1400 WATTS 230 VOLT

SUNK KEY -Z077 Machining for VHM Assy.

TORQUE WRENCH 1/2" SQUARE DRIVE

YOKE-F999 Machining for HM Assy.

SHIM SET - (OD-482 & ID-411, UPPER BRG. KEEPER) (HY- 311. A) - AS PER DRG. 36100000443/00 WITH MATL. AS

Various types of SUPPORT ROD Machining for QCNRV Assy.

HYDRAULIC GEAR PUMP MAKE: REXROTH MODEL: F 002 E10 006, VARIABLE AXIAL PISTON PUMP MODEL: AL A10VSo, VARIABLE DISPLACEMENT VANE PUMP, R900950955

Triplex feature filter half inch with particle 1 micron removal, Triplex feature filter two inch with particle 1 micron removal, Accessories with installation, Automatic high discharge heavy duty timer drain valve

AA6340103049 HSS Circular Screwing Die Type-A, M6, AA6340103057 HSS Circular Screwing Die Type-A, M8, AA6340103065 HSS Circular Screwing Die Type-A, M10

BEECH WOOD TANGENTIAL TOP RING (BEECH WOOD TANGENTIAL TOP RING) AS PER DRG. NO. 34647701005 REV 03

FAVOF5161-OFE BODY FBV MACHINING

TOP RING (TOP PRESSING RING AS PER DRG. NO. 34987700095 REV 01)

SUPPLY OF NIRAPARIB TABLET

Complete machining of Taper Pins with BHEL material

Custom Bid for Services - Butt Joint Welding of Diameter 219 mm Pipes and 273 mm Pipes inside BHEL Trichy Premises Similar Category Support Services

CONSUMABLES FOR GAS SERVICES

Framework Agreement (FA) for 01 Year for Supply of Aluminum Filler Wires as per NIT on F.O.R. BHEL Rudrapur delivery basis

Supply of Mounting brackets

Dampers

IS Isolator for 4-20 mA I/P and Dual O/P

B7B1Z44652 VERTICAL STORAGE CONTAINER

Supply of HYDRO MOTOR-3 RG (CPE)

Testing of drinking water samples of BHEL, RC Puram, Hyderabad

B7D1Y21177 - FERROSTAT SPEED PICKUP TC9751932017, B7D1Y21177 FERROSTAT SPEED PICKUP TC9755206558, B7D1Y21177 FERROSTAT SPEED PICKUP TC9765524013

HY8442247114_ REXROTH HYD_ PUMP PV7_ 17slash10_ 20RE01MC0_ 10

AUSTENITIC STAINLESS STEEL PLATES 50mm

SCREW M-30 x 250 Lg HARDWARES ARE TO BE SUPPLIED AS PER BELOW SPECIFICATION: 1. MATERIAL: - SCREWS S, SCREW M-36 x 250 Lg HARDWARES ARE TO BE SUPPLIED AS PER BELOW SPECIFICATION: 1. MATERIAL: - SCREWS S

Online UPS (?10KVA) Without Battery Conforming To IS16242 (Part1) (Q2)

PLUNGER COIL REGULATOR TYPE TR 7/4 W4Z 250.004 MAKE-EMG FOR MANIPULATOR CONTROL OF 2650T FORGE PRESS

ANGE000186