Loading
Loading…
Loading…
1,231 results • Latest
pbx Average Turn Over of Last 3 Years 125 Lakh (s) Experience with Gov. Required 12 Year (s) Pbx ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values EXTENSION AND TRUNK/JUNCTION FEATURES Number of analog Extensions 48 8, 12, 16, 24, 32, 40, 48, 64 Number of CO/analog trunks 6 1, 2, 3, 4, 6, 8, NA System expadable upto (TDM ports) 64 16, 64 Provision for digital phone extension true - If YES, number of digital extensions 8 2, NA GENERAL FEATURES Call Pick-Up Feature true - Conference Feature true - CLI - Transferable + Internal(DTMF/FSK) Available - Do Not Disturb(DND) true - Call Forward Feature - in 3 different conditions true - Call Parking Feature true - Call Waiting Feature true - Hold Music true - 1/5 Memory Dialing Feature true - Distinctive Ringing Feature true - Auto Call Back Feature true - Redial Feature true - Auto Attendant true - Emergency Call Feature true - Auto Call Disconnection Feature true - Date/Time Setting true - Boss Secretary Call Feature true - Day/Night Mode true - Auto-Attendant messages Welcome message, Extension message, No answer message - Voice Mail Available - Number of Auto attendant messages 3 - Other features - - GENERIC Dimensions(H×W×D) 120x80x180 - Weight - - Mounting of PBX Both - PROTECTION Protection against over current and over voltage on the output side Yes - POWER SUPPLY/BATTERY Power Requirement 230V, +/-10%, 50Hz - Battery Backup Available - If available, battery backup time (Hour) 2 - Inbuilt Battery charger Available - Chemistry of battery SMF - Battery capacity (AH) 12 - OPERATING CONDITIONS Minimum Operating Temperature(Degree C) 5 - Maximum Operating Temperature(Degree C) 50 - Operating Humidity(RH) 90 - 2/5 WARRANTY Warranty 1 1, 5 INSTALLING&COMMISSI ONING Installation & Commissioning With With, Without Scope of the installation as per STC of the product YES - MANUAL AND ACCESSORIES The scope of supply include one set of operation and maintenance manual for each equipment YES - TEST REPORT DETAILS AND TESTS TEC approval as per the latest TEC specifications NA - If Available, TEC approval Certificate number - - Availability of Test Reports from Central Govt/NABL approved ILAC accredited Lab to prove conformity to specifications true - Conformity to Dry Heat test at Specified Maximum Operating Temperature for 16 hours as per IS :9000 latest true - Conformity to Cold test at Specified Minimum Operating Temperature for 4 hours as per IS: 9000 latest true - conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH true - Test Report number and date - - Name and Address of the Test lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jeltrudis Lyngkhoi 793021, Ministry of 1 15 3/5 Environment, Forest and Climate Change, Law U Sib, Near MTC Workshop, Shilong-793021 EMD Required No ePBG Required No
Dry Erase Writing Boards Experience with Gov. Required 1 Year (s) Dry Erase Writing Boards ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Performance Parameters Purpose of writing board Writing Writing Material of Board Ceramic Steel Ceramic Steel Material of Frame Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Material of Back Cover Galvanized steel sheets conforming to IS:277 Galvanized steel sheets conforming to IS:277 Thickness of Back Cover 0.25 - Thickness and Material of back support (conforming to IS:12406) 9 Top surface coating thickness of sheet in mm 0.03 - % Gloss at 60 deg.head (min.) 80% for white colour only 80% for white colour only Surface suitable for writing with Dry marker ink for white board only Dry marker ink for white board only 1/3 Back surface coating thickness of sheet (min) 0.03 Thickness and material of top steel sheet Having Viterious Enamelled coating on both side 0.3 0.3 Excellent Erasability without leaving impression Yes - Warranty in years 1 1, 2, 3, 4, 5 Dimensional parameters Dimensions of the Board in feet (width x height ) 3 x 4 3 x 4 Dimensions of Boards in mm x mm (width x height ) 900 X 1200 450 X 600, 600 X 900, 900 X 1200, 1200 X 1800, 1200 X 2400, 1200 X 3000, 1200 X 3600 Wall thickness of Anodized Aluminium Frame (Min) in mm 1.2 1.2 Colour of Board White White Frame Width in mm 20 20.0 Additional Items One Magnetic Type Eraser Yes - 4 nos dry erasable ink markers(Green/blue/re d/Black) Yes - one set of 6 Pcs paper holding magnets for white board only false - one box of 50 nos non dust chalks sticks false - one dry wipe duster 3 nos spare sponges for colour and black board false - Reports Availability of Type Test Reports of the product from Central Govt/NABL/ILAC accredited Lab showing compliance to the specification YES YES, No Test Report No - - Test Report Date - - Name of the Lab - - 2/3 Complete Address of the Lab - - copy of test reports to be furnished to the buyer on demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 4 15 EMD Required No ePBG Required No
Foolscap sheets Foolscap Sheets ( 400 ) Technical Specifications Specification Specification Name Values Allowed Values Type Description (size) of Paper FOOLSCAP FOOLSCAP, LEGAL Dimension and Weight Dimension of the Paper (W X L) (mm X mm) 215 X 342 215 X 342, 216 X 356 GSM (GSM) 75 75, 80, 90 Physical Characteristics Brightness (%) 80 Tensile Index MD (Nm/g) 40 - Tensile Index CD (Nm/g) 25 - Opacity (%) 85 - Tear Index (Avg) (Nm.m2/g) 4.5 - Smoothness for both sides (Bendtsen) (ml/min) 150 - Thickness (um) 95 - Moisture (%) 4 - Stiffness MD 4 - Stiffness CD 1 - Surface Strength 12 - 1/3 Dennison (Wax Pick) N>= 12A Test Method as per IS: 1060 Yes - Packing Number of Sheets per Ream (Nos) 500 Sheet - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Debkinandan Joshi 110010, CE (WAC) AF PALAM DELHI CANTT 400 15 EMD Required No ePBG Required No
All in one Average Turn Over of Last 3 Years 200 Lakh (s) Experience with Gov. Required 3 Year (s) All In One ( 170 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 7th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description Intel HD Graphics 630 - Storage Type of Hard disk drive SATA SATA Hard Disk Drive Size (GB) 1000 1000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4 RAM Expandability 32 32 1/4 Upto (GB) Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows - Display Display Size (Inch) 19.5 19.5 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 4 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Not-Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 120 - Power Efficiency (%) Minimum 80 - Others Webcam HD - 2/4 DVD R/W Available - Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rahul Shinde 400071, Education Inspector Office, North Zone, New Administrative Building, R.C. Marg, Chembur West 170 15 EMD Required No ePBG Advisory Bank State Bank of India ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 38
LED Lamps- bulb LED Lamps- Bulb ( 2750 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 7Watt/700 lumens 7Watt/700 lumens Colour Temperature (K) 2700 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d Warranty for free replacement (Years) 2 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest - FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 - LED Chip Efficacy (Lm/W) >/=130 - Colour Rendering Index(CRI) >/=80 - Beam Angle (Degree) >/=120 - Power Factor >/=0.9 - Total Harmonics (%) </=15 - Driver Efficiency (%) >/=85 - LED chip Wattage (Watt) </=1 - Surge Voltage 2.5 - 1/3 withstand (KV) Operating Voltage range (Volts) 100 Volt to 300 Volt - Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt - Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 - CONSTRUCTIONAL Light Source (as per LM80 orIS16106) As per OEM LM report - LED Make HPL - Light Source (as per LM80/IS16106) SMD LED Chip - Lamp Shell material Polycarbonate - Ingress Protection in IP >/=20 - TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes - LED life test Certificate No. 823315 - LED life Certificate Test Report Date 18/08/2016 - LED lamp life certificate for 6000 hrs Yes - LED Lamp certificate Number 823316 - LED Lamp Life Certificate date 10/08/2016 - Name of Lab where test conducted spectro - EMC Test Yes - Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes - Test certificate No. 847561 - Test Report Date 23/11/2016 - Name of lab where test conducted spectro - Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Rohit Sharma 180003, Garrison Engineer Jammu, Satwari Cantt, Pin - 180003 (J & K) 1500 15 2 Mahesh B 180010, GE Kaluchak, Military Engineer Services, Opp SBI Kaluchak, Pin - 180010 Jammu 1000 15 3 Dhiraj Kumar Tiwary 180003, Garrison Engineer Satwari, Jammu Cantt, Pin - 180003 250 15 EMD Required No ePBG Required No
LED Lamps- bulb LED Lamps- Bulb ( 2300 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 5Watt/500 lumens 5Watt/500 lumens Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d Warranty for free replacement (Years) 2 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest - FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 - LED Chip Efficacy (Lm/W) >/=130 - Colour Rendering Index(CRI) >/=80 - Beam Angle (Degree) >/=120 - Power Factor >/=0.9 - Total Harmonics (%) </=15 - Driver Efficiency (%) >/=85 - LED chip Wattage (Watt) </=1 - Surge Voltage 2.5 - 1/3 withstand (KV) Operating Voltage range (Volts) 100 Volt to 300 Volt - Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt - Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 - CONSTRUCTIONAL Light Source (as per LM80 orIS16106) 6500 - LED Make orbit - Light Source (as per LM80/IS16106) SMD LED Chip - Lamp Shell material Polycarbonate - Ingress Protection in IP >/=20 - TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes - LED life test Certificate No. 13/8/17 - LED life Certificate Test Report Date 12/10/17 - LED lamp life certificate for 6000 hrs Yes - LED Lamp certificate Number 124421 - LED Lamp Life Certificate date 15/5/17 - Name of Lab where test conducted bharat test house - EMC Test Yes - Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes - Test certificate No. 124421 - Test Report Date 16/8/17 - Name of lab where test conducted bharat test house - Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Rohit Sharma 180003, Garrison Engineer Jammu, Satwari Cantt, Pin - 180003 (J & K) 1000 15 2 Mahesh B 180010, GE Kaluchak, Military Engineer Services, Opp SBI Kaluchak, Pin - 180010 Jammu 1000 15 3 Dhiraj Kumar Tiwary 180003, Garrison Engineer Satwari, Jammu Cantt, Pin - 180003 300 15 EMD Required No ePBG Required No
anti set off spray powder Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 1 Year (s) Anti Set Off Spray Powder ( 2500 ) Technical Specifications Specification Specification Name Values Allowed Values Material Product base Made from Natural Starch Made from Natural Starch, Made from other Material Base Material of starch NA Coating Grade/Coating Coated powder Coated powder, Uncoated powder Coated powder are Micro encapsulated YES YES, NO, NA Particle Details Particle Grade Fine Fine, Medium, Coarse Particle size (micron) 5 - Physical Characteristics Freely Flowing true true Sprayable true true Hydrophobic Property Insensitive to Normal Air Humidity - Stable in Storage YES - Insoluble in water and alchohal YES - Shelf Life (Months) 70 - 1/2 Packing Packing Material 20 Ltr 4Ltr - Packing Size (Kg) 20 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Salwinder Singh 144005, GE, Engineer Park, JALANDHAR CANTT, 2500 15 EMD Required No ePBG Required No
steel pipes for water and sewage Experience with Gov. Required 5 Year (s) Steel Pipes For Water And Sewage ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 3589:latest Yes - ISI Marked true CML Number 5661877 - Manufacture, Material and Coating Method of Manufacturing Seamless Seamless, Electric Resistance Including Induction Welding, Submerged Arc Welded Including Spirally Welded (SAW) Grade of Steel Fe410 Fe330, Fe410, Fe450 Type of Coating Zinc Coating Without Coating, Zinc Coating, Cement Mortar Protective Linning and Coating, Liquid Epoxy Coating, Fusion Bonded Epoxy Coating, Hot Applied Tape Coating, Cold Applied Tape Coating Dimension Outside Diameter of Pipe (mm) 323 9 168 3, 219 1, 273, 323 9, 355 6, 406 4, 457, 508, 610, 711, 813, 914, 1016, 1067, 1118, 1219, 1422, 1626, 1829, 2032, 2235, 1/3 2540 Thickness of Pipe (mm) 5.6 2 6, 3 2, 3.6, 4.0, 4.5, 5.0, 5.6, 5.8, 6.3, 7.1, 8.0, 8.8, 10.0, 11.0, 12.5, 14.2, 16. 0, 17.5, 18.0, 20.0, 22.2, 2 5.0 Mass of Pipe per meter 13.9 10.6, 12, 13.9, 18.2, 19.1, 23.8, 23.9, 26.5, 31.8, 33, 33.1, 34.7, 35.4, 39.7, 41. 1, 43.2, 44, 44.7, 48.3, 49. 5, 55.5, 55.7, 62, 62.2, 68. 6, 69.4, 70, 77.9, 83.5, 86. 3, 93.8, 109, 110, 123, 14 1, 159, 179, 184, 186, 196, 219, 223, 230, 241, 248, 251, 298, 300, 328, 3 72, 387, 435, 491, 493, 56 4, 634, 635, 715, 782, 795, 869, 957, 992, 1092, 121 1, 1243, 1379, 1551 Length of Pipe (Metres) 6.0 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 5.5, 6.0, 6.5, 7.0, 7.5, 8.5, 9.0, 9.5, 10.5, 11.5, 12. 0, 13.0, 13.5, 14.0 Type of Joint Pipe Ends for Joint Plain Ends Plain Ends, Bewelled Ends, Sleeve Joints, Swelled Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test Report No 1548 - Test Report Date 22018 - Name of the Lab PSST STEEL TUBE LTD - Address of the Lab RAJNANDGAON, CHATTI SGARH - Test report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shakir Baks Siddiki 486223, nagar parishad theonthar near by janpad 300 15 2/3 panchayat teonthar distt- Rewa (MP) EMD Required No ePBG Required No
Notebook Computers-laptop Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7 th 7 th Processor 2.9 GHz Dual-Core Intel Core i5 (Turbo boost upto 3.3 GHz) with 4MB shared L3 cache Intel Core i3-6006u (2.0 GHz, 3 MB cache, 2 cores), Intel Core i3-6100U (2.3 GHz, Intel Core i3-7100U (2.4 GHz, Intel Core i5-5300U (upto 2.9 GHz, Intel Core i5-6200U (uptp 2.8 GHz, Intel Core i5-6260U (upto 2.9 GHz, 4 MB cache, Intel Core i5-6300U (upto 3.0 GHz, Intel Core i5-7200U (upto 3.1 GHz, Intel Core i5-7Y54 Processor (up 1/7 to 3.20 GHz, 4M Cache, Intel Core i7-6500U (upto 3.1 GHz, Intel Core i7-6560U (upto 3.2 GHz, Intel Core i7-6600U (upto 3.4 GHz, Intel Core i7-6650U (upto 3.4 GHz, Intel Core i7-6660U (upto 3.4 GHz, Intel Core i7-7Y75 (up to 3.60 GHz, 2 cores, Intel Core i7-7500U (upto 3.5 GHz, Intel Core m3 6Y30 (900 MHz, Intel Core m3-7Y30 Processor (up to 2.60 GHz, Intel Core m5 6Y54 (1.1GHz, Intel Core m7 6Y75 (1.2GHz, 1.1GHz Dual- Core Intel Core m3 (Turbo boost upto 2.2GHz) With 4MB L3 cache, 1.2GHz Dual- Core Intel Core m5 (Turbo boost upto 2.7GHz) with 4MB L3 cache, 1.6 GHz Dual- Core Intel Core i5 (Turbo boost upto 2.7GHz) with 3MB shared L3 cache, 2.0 GHz Dual-Core Intel Core i5 (Turbo boost upto 3.1 GHz) with 4MB shared L3 cache, 2.9 GHz Dual-Core Intel Core i5 (Turbo boost upto 3.3 GHz) with 4MB shared L3 cache, 2.6GHz quad- core Intel Core i7, Turbo Boost up to 2/7 3.5GHz, with 6MB shared L3 cache, 2.7GHz quad- core Intel Core i7, Turbo Boost up to 3.6GHz, with 8MB shared L3 cache, AMD A4-7210 (1.8 GHz, 2 MB L2 Cache, 4 Cores), AMD A6-7310 (2.2 GHz, 2 MB cache, AMD A8-7410 (2.2 GHz, AMD A10-8700P (1.8 GHz, Intel Atom x5-Z8330 (1.44GHz, 2MB Cache, Intel Atom x5-Z8350 (1.44GHz, Intel Atom x5-Z8550 (1.44GHz, Intel Atom x5-Z8750 (1.60GHz, Intel Core i7-7700HQ (2.80GHz, 6MB Cache, Intel Core m3-7Y32 (1.1 GHz, Intel Core m3-7Y30 (1.0 GHz, Intel Core m3-6Y30 (900 MHz, Intel Core m5-6Y54 (1.1 GHz, Intel Core m5-6Y57 (1.1 GHz, Intel Core m7-6Y75 (1.2 GHz, AMD A4 PRO 3350B (2.00 GHz, AMD A6 9220 (2.5 GHz, 1 MB cache, AMD A9 9420 (3.0 GHz, AMD E2 9000e (1.8 GHz, 1 MB 3/7 cache, Intel Core i5 7440HQ (2.8 GHz, 6 MB cache, Intel Core i7 7820HQ (2.9 GHz, 8 MB cache, Intel Core i5 8250U (1.6 GHz, Intel Core i5 8350U (1.7 GHz, Intel Core i7 8550U (1.8 GHz, Intel Core i7 8650U (1.9 GHz, Intel Pentium Silver N5000 (1.1 GHz, Intel Pentium 4410Y (1.5 GHz, Intel Pentium 4415Y (1.6 GHz, Intel Pentium 4415U (2.3 GHz, Intel Celeron N4100 (1.1 GHz, 4MB Cache, Intel Celeron N4000 (1.1 GHz, Intel Celeron 3865U (1.8 GHz, Intel Celeron 3965Y (1.5 GHz, Intel Celeron 3965U (2.2 GHz, Intel Core i3-7020U (2.3 GHz, AMD A9 9410 (2.9 GHz, AMD A9 9220 (2.5 GHz, AMD A9 9210 (2.4 GHz, AMD Ryzen 3 2 200U (2.5 GHz, 4 MB C ache, 4 Core, AMD Ryze n 3 2300U (2.0 GHz, AMD Ryzen 5 2500U (2.0 GH z, 8 Core, AMD Ryzen 7 2700U (2. 2 GHz, 8 Core 4/7 Graphics Graphics Type Integrated - Graphics Card Description INTEL INTEGRATED GRAPHICS - Graphics Memory (GB) 0 - Memory Type of RAM LPDDR3 on Board - RAM Size (GB) 8 8 RAM Expandable upto (GB) NA 8, 16, 32, 64, NA RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive SATA SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( GB) 512 512.0 Hard Disk Drive Speed (rpm) null - Operating System Operating System Mac OS Sierra or Latest Mac OS Sierra or Latest Ports USB 3.0 or higher (No.) 2 - USB Type C Available - VGA Port Not-Available - HDMI Port Not-Available - DISPLAY PORT Available - Thunderbolt Port 1 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 13 13 Display Resolution (Pixel) 2560 x 1600 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - 5/7 Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Backlit - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.37 - Carry Case Not Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 10 - Warranty Battery Warranty (Year) 1 1, 3 On Site OEM Warranty (Year) 1 1, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 vemula vijayaraj 500008, D.No.54-19-21/3D, Popular Towers, Jayaprakashnagar, LIC Colony 3rd Cross Road, Vijayawada-500008, Andhra Pradesh 1 15 EMD Required No ePBG Required No
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 600 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4, A3 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 95 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 93 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 150 - 1/2 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 3 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 NARESH KUMAR SHARMA 110048, E-8 GREATER KAILASH, ENCLAVE-2 600 15 EMD Required No ePBG Required No
waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Average Turn Over of Last 3 Years 1000000 Lakh (s) Experience with Gov. Required 1 Year (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 3004 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA - Class confirming to IS:12402 (For Public Dustbins) NA - Material HDPE HDPE, LDPE, LLDPE, Corr osion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining/bin) CAPACITY Bin Capacity (Volume) (Ltrs) 10 Litres 120 Litres (as per IS: 12402 Pt1 and 2, 240 Litres (as per IS: 12402 Pt 1 and 2), 330 Litres (as per IS: 12402 Pt1 and 2), 500 Litres (as 1/3 per IS: 12402 Pt1 and 2), 750 Litres (as per IS: 12402 Pt1 and 2), 1000 Litres (as per IS: 12402 Pt1 and 2), 10 Litres, 20 Litres, 30 Litres, 40 Litres, 50 Litres, 60 Litres, 80 Litres, 100 Litres, 660 Litres, 1110 Litres, 1100 Litres, 1250 Litres, 3500 Litres, 4500 Litres DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) NA - Weight of Dustbin (Complete unit) (Grams) 350 - CONSTRUCTIONAL Colour other than green/blue - Wheel Lock Without - Load carrying Capacity (Kgs) 12 - Wall Non- Perforated - Lid removable - Handle With - Wheel Without - Wheel Material NA - Towage Provision yes - Gripping Provision Frontal - Plugged outlet for washing & draining With - UV Resistant yes - Dust Bin stand without - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number 19797 - Test report date 25.05.2017 - Name and address of lab Central Institute of Plastics Engineering & Technology - 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Sahu 495223, nagar palika parisad tifra 3004 15 EMD Required No ePBG Required No
alumino ferric Alumino Ferric ( 15000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES - ISI Marked false BIS Licence Number NA - Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification NO YES, NO Test Report Number QCL/04/0607 - Test Report Date 01/04/2017 - Name of the Lab QUALITY CONTROL LAB - Address of the Lab BHOPAL - Test report to be furnished to the buyer on demand YES - Grade Grade Grade 4 (in solid form for treatment of water intended for drinking) - Packing Packing Size (Kg) 20 Packing Material 20 KG LOOSE - 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 15000 15 EMD Required No ePBG Required No
Dry Erase Writing Boards Experience with Gov. Required 1 Year (s) Dry Erase Writing Boards ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values Performance Parameters Purpose of writing board Writing Writing, Writing cum Projection screening Material of Board Ceramic Steel Ceramic Steel Material of Frame Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Material of Back Cover Galvanized steel sheets conforming to IS:277 Galvanized steel sheets conforming to IS:277 Thickness of Back Cover 0.25 - Thickness and Material of back support (conforming to IS:12406) 9 Top surface coating thickness of sheet in mm 0.095 - % Gloss at 60 deg.head (min.) 2% green, blue, black colours 80% for white colour only, 2% green, black colours, 60% for white colour only 1/3 Surface suitable for writing with chalk for colour & black board Dry marker ink for white board only, chalk for colour & black board Back surface coating thickness of sheet (min) 0.03 Thickness and material of top steel sheet Having Viterious Enamelled coating on both side 0.3 Excellent Erasability without leaving impression Yes - Warranty in years 5 1, 2, 3, 4, 5 Dimensional parameters Dimensions of the Board in feet (width x height ) 4x 6 1.5 x 2, 2 x 3, 3 x 4, 4x 6, 4 x 8, 4 x10, 4 x 12 Dimensions of Boards in mm x mm (width x height ) 1200 X 1800 450 X 600, 600 X 900, 900 X 1200, 1200 X 1800, 1200 X 2400, 1200 X 3000, 1200 X 3600 Wall thickness of Anodized Aluminium Frame (Min) in mm 1.2 1.2 Colour of Board Green Green, Black, White Frame Width in mm 20 20 Additional Items One Magnetic Type Eraser No - 4 nos dry erasable ink markers(Green/blue/re d/Black) No - one set of 6 Pcs paper holding magnets for white board only false - one box of 50 nos non dust chalks sticks true - one dry wipe duster 3 nos spare sponges for colour and black board true - Reports Availability of Type Test Reports of the product from Central Govt/NABL/ILAC accredited Lab showing compliance to the specification YES YES, No 2/3 Test Report No - - Test Report Date - - Name of the Lab - - Complete Address of the Lab - - copy of test reports to be furnished to the buyer on demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 7 15 EMD Required No ePBG Required No
cotton rugs-Durry Blue ( Handloom Cotton Bed Durries Dyed Sulphur Blue) Cotton Rugs-Durry Blue ( Handloom Cotton Bed Durries Dyed Sulphur Blue) ( 355 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Conforming to Indian Standard IS:1450: 1991: latest - Variety No as per IS 5 - DIMENSIONS Dimensions ( Length X Width ) 183 cms X 92 cms 183 cms X 92 cms, 198 cms X 107 cms CONSTRUCTION Ends/dm 40 - Picks/dm 110 (6- strand untwisted ) - Yarn used in manufacturing Cotton yarn - Weave Plain Weave - Mass (gm/sq .mtrs) 850 - COLOUR Colour Blue - Nature of Dye Sulphur - TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification YES - 1/3 Test Report to be furnished to buyer on demand Yes - Name of the Lab 0 - Address of The Lab 0 - Test Report No. 0 - Test Report Date 0 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Thakur 193502, 129 BN BSF Campus Opposite DC Office Bandipora, Kashmir 355 15 EMD Required No ePBG Required No
mosquito repellant cream spray and lotion Mosquito Repellant Cream Spray And Lotion ( 3500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Product is registered under the Drug and Cosmetic Rules, 1945 YES - Certificate Number 815 - Certificate Date 31/7.14 - Drug Licence to Manufacture for sale YES - Drug licence Number NH/176 - Drug licence Date 27.8.14 - The product is approved from Drugs Controller General (India) YES - Approval Letter Number 815 - Approval Letter Date 31/07/14 - Test Report Details Availability of Test Report from Central Govt./State Govt/NABL/IL AC accredited Lab YES YES, No Test report to be furnished to the buyer on demand YES - 1/3 Test Report Number AFLPL/F/070716022 - Test Report Date 15/7/16 - Name of the Lab AVON FOOD LABPVT LTD - Address of the Lab LAWRENCE ROAD IND AREA NEW DELHI-35 - Material Chemical 12 % (W/W) N, N Diaethyl Benzamide 20 % (w/w) Di Ethyl Phenyl Acetamide (DEPA), 20 % (V/V) Di Ethyl Phenyl Acetamide (DEPA), 12 % (W/W) N, N Diaethyl Benzamide Type Type Cream Cream, Spray, Lotion Packing Size Packing Size (type gram (unit) for cream and ml (unit) for spray and lotion) 100 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yogesh Kumar Rana 732127, 36 Bn BSF, 17 Mile Baishnabnagar, PO- Chamagram 3500 15 EMD Required No ePBG Required No
watermist and caf fire extinguisher high pressure motor cycle mounted Watermist And Caf Fire Extinguisher High Pressure Motor Cycle Mounted ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Genric "Conformity to EN 3-7:2004+A1:2007-08 standards The complete system shall be tested for compliance from an int ernationally/nationally accredited laboratory for compliance to all 30 clauses (3.2, 3.15, 4.2, 4.3, 4.4, 4.5, 6.1, 6.2, 6.3, 7.1.1, 7.1.2, 7.2, 7.3, 7.4, 8.1, 8.2, 9.2, 10.1, 10.2, 10.3, 10.4, 10.5, 10.6.1 & 10.6.2, 14.1, 14.2, 15.2, 15.3, 16.1, 16.2) of EN 3 - 7:2004 + Al: 2007-08 (E) Standard mandatorily applicable for the complete system." Yes - Mounting Type Motor Cycle Mounted but excluding motorcycle - Main Components: Yes - 1/7 Pressure vessel to hold the media with safety valve, compressed air cylinder coupled with a reducer, hose pipes for discharge of water mist media, extinguishing gun. System shall be designed for maximum operating temperature TSmax and minimum operating temperature TSmin of 60 deg C or more and 5 Deg C or less respectively and certified by the manufacturer accordingly as per Clause 7.4 of EN 3-7:2004+A1:2007-08 standards as per the accredited test report for backpack system. Yes - Constructional Configuration (Two backpacks each containing two air cylinder of 2 litre each shall be mounted on the motorcyle Royal Enfiled Electra 5 Speed 350 cc. Also mounted on motorcyle shall be front windshield ( 2mm thick FRP), leg guard (made from 25mm dia 16 gauge nickel plated steel pipe), a Siren (12V 30 Amp audible at a distance of 200m), two blinking lights (12V 20W each red lights with flasher), First Aid Box (cotton absorbant 100g, Band Aid 10 pcs, Burnol 2 pcs, Tincture Iodine 100 ml) and Gel blanket. The motor cycle shall have space to store two air cylinders and breathing apparatus. The wind shield shall be duly markedwith a logo as desired by the user. Note: Motor Cycle is Yes - 2/7 not in the scope of supply to be purchased by buyer separately.) Model Number as per Accredited Laboratory Test Report and Extinguishers is to be declared ASKA HIPRESS 9 CARBON-E - Air Cylinder Capacity (Ltrs) 2 - No. of air Cylinder 4 - Air Cylinder pressure (Bar) 300 - Air Cylinder Material Ultralight Carbon composite with PET Liner Ultralight Carbon composite with PET Liner Type of Foam Special AFFF Compound conforming to manufacturer own specifications for higher fire rating A55, B233, Spreading coefficient for special AFFF Compound shall be +5 minimum, concentration shall be 6%. Special AFFF Compound conforming to manufacturer own specifications for higher fire rating A55, concentration shall be 6%. If special foam mention the compostion for special, otherwise put NA Water 96%, 1, 2-Ethandiol, Fluorinated surfactant < 0.5%, Octylsulfate< 1%, Decylsulfate<1%, Akylpolyglycoside<1% - Commercial Brand Name of the Special foam (fire extinguishing medium) as per accredited laboratory test report wherein higher fire ratings i.e A55, E1000 V (Die Electric Suitability) achieved, to be declared. ASKA 63A - Characteristics of extinguishing medium ready to use of Special AFFF Compound (manufacturer own specifications) with infrared spectrogram (with commercial brand name) to be drawn by Density 1.04 (kg/dm3), Viscosity 1.35(mm2/s), pH factor 7.8, Refractive index 1.34 at 20 ± 2deg C - 3/7 accredited test report. Class A, Class B and Electrical Fire Rating with Special AFFF Compound for backpack 55A, 233B, E1000V(Die Electric suitability) with commerdial brand name of fire extinguishing medium as per accredited laboratory test report for Backpack System Yes - Pressure Vessel Material Ultralite Carbon Composite with PET Liner Ultralite Carbon Composite with PET Liner Capacity (Nominal Charge) 9 - Wall Thickness of Aluminimum alloy pressure vessel (mm) 5 - Extinguishing gun material Stainless Steel - if others Mentions the material for Extinguishing gun, otherwise put NA NA - Extinguishing gun weight (750 grams approx) 750 - Length of EN marked Hose 1.3 meter for backpack system (meter) 1.3 - Weight of fully charged Backpack system between 25kg to 27kg having Corrosion Free Aluminum Alloy vessel and below 20 kg having Ultralite Carbon Composite with PET Liner Vessel for 20 - Performance High Pressure Type Dynamic Operating pressure to be tested in the accredited laboratory test report which will be considered as high pressure as per clause 37 - 4/7 No. 3.15 of EN 3 - 7:2004 + Al: 2007-08 (E) Standard. >= 30 for aluminimum alloy vessel, > = 35 for Ultralite Carbon Composite with PET Liner vessel Lancing Distance of Gun : More than 12 meter (meter) 15 - The air hoses shall be suitable for minus 40 deg C to 100 Deg C temperature and EN mark on hose Yes - Fire Rating 55 A, 1000V with Special AFFF Compound as per manufacturer own specn 55 A, 1000V with Special AFFF Compound as per manufacturer own specn Certification PED approval as per Directive 97/23/EC Yes - Pressure Vessel shall include a pressure gauge fitted on the vessel (CE Marked from notified body) to measure the air cylinder pressure. Yes - "No objection certificate (NOC) for Pressure Vessel from Petroleum and Explosives Safety Organization (PESO) Nagpur . " Yes - Pressure Vessel should have CE Marking from Notified body Yes - The air cylinders shall have PESO, Nagpur approval Yes - Specific consent of the OEM for the value additions made along with a confirmation that fire ratings of the equipment would not be affected by these value additions. Yes - Availability of Test Yes - 5/7 Report to EN Standard as per serial number 1 above Test Report No. 20161319/AS 06 - Test Report Date 28-10-2016 - Name of NABL/ILAC/Central Govt Accredited Laboratory where Test Conducted MPA DRESDEN - NOC Letter No. Date of PESO Nagpur for Pressure Vessel G.3(42)Misc./2017/428 DT 19.07.2017 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Snehal Ramesh Panhalkar 416106, Kurundwad Municipal Council, Bazar Peth Kurundwad 1 25 EMD Required No ePBG Required No
pvc aluminium cable Pvc Aluminium Cable ( 270 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Product description Non Weather proof Unarmoured PVC Insulated Unsheathed Cable with Aluminium Conductor for working Voltage up to and including 1100Volt and conforming to IS:694/90 Reaffirmed 2005 Conductor shall conform to table I and II as applicable 0f IS:8130/1984 Reaffirmed 2005 Non Weather proof Unarmoured PVC Insulated Unsheathed Cable with Aluminium Conductor for working Voltage up to and including 1100Volt and conforming to IS:694/90 Reaffirmed 2005 Conductor shall conform to table I and II as applicable 0f IS:8130/1984 Reaffirmed 2005, Weather proof Unarmoured PVC Insulated, PVC Sheathed Cable with Aluminium Conductor for working Voltage up to and including 1100Volt and conforming to IS:694/90 Reaffirmed 2005 Conductor shall conform to table I and II as applicable 0f IS:8130/1984 Reaffirmed 2005 1/3 BIS Marking Mandatory - BIS CM/L No. 9763909 - Cable Size (Sq-mm) 6 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95, 120 No. of Core (Nos.) Twin Single, Twin, Three, Four Type of Cable Flat Flat, Circular Type of Conductor Single Single, Three Strand, Seven Strand, Multistrand CONSTRUCTIONAL Standard cable length sUpplied in coils without negative tolerance (meters) 100 mETRES - Supply of short length quantity against individual supply order Minimum 5 percent - Short length (meters) 90 - Nos of Short length in reel (No.) 1 - Sequential Marking of the cable length on each meter YES - CERTIFICATIONS Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification Suppliers shall submit complete and satisfactory Type Test Certificate for the smallest and the largest sizeof the cable Type tests shall include thermal stability test for insulation and sheath Seperate TTC shall be required for nonweather proof and weather proof cables YES - Test Report No. T-0089 - Test Report Date 15/12/2017 - Name of the Lab NABL - Address of The Lab MANAK BHAVAN 9 BHADURSHAH ZAFAR MARG NEW DELHI-110002 - 2/3 Test report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 A Ramasamy 370201, A O Building EDP Section, Finance Department, Gandhidham 270 30 EMD Required No ePBG Required No
thin client computers Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 3 Year (s) Thin Client Computers ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Configuration Type Desktop Thin Client Desktop Thin Client Processor make Intel AMD, Intel Chipset Intel - Operating system, Number of Core & Processor Speed Windows embedded Standard 10 or higher with browser Quad Core, Min 2 Ghz Windows embedded Standard 10 or higher with browser Quad Core, Min 2 Ghz Graphics Integrated Integrated, Discrete Type of RAM DDR3 - RAM Size (GB) 4 4 Storage (Powered Flash) (GB) 32 8, 16, 32, 64 Printer support Local and Network - Wi-Fi Connectivity NA 802.11a/b/g/n, 802.11 ac, NA Display/Monitor Display/Monitor Available Available Display Type Discrete in case of Desktop Thin Client Integrated in case of Mobile Thin Client, Discrete in case of Desktop Thin Client 1/3 Display Size (Inch) 18.5 18.5 Display Resolution (Pixels) 1366 x 768 - Ports USB port 2.0 (Nos) 6 - USB port 3.0 or higher (Nos) 1 - Serial Port 2 - Parallel Port 1 - USB C 0 - VGA Port 1 - DVI Port 0 - Audio Single audio/single 3.5mm port for Mic in and speaker out - Display Port 0 - HDMI 1 - Networking port Ethernet 10/100/1000 - Input Output Devices Keyboard Standard With USB Interface - Mouse 2 button scroll optical mouse with USB interface - Certifications BIS Registration under CRS of Meity Yes - BIS Registration Number - - Miscellaneous Networking Protocols TCP/IP with DNS and DHCP, twisted pair (RJ-45), point to point protocol (PPP), PPP over ethernet (PPPoE), point to ponit tunneling protocol (PPTP), wake on LAN - Terminal server protocols Integrated microsoft RDP/Citrix ICA./VM Ware - Operating System & Management Software Windows embedded OS with IE 10.0 browser or higher enterprise client management software from the same OEM - Additional features DHCP/FTP enabled flash upgrade, VNC server & txtpad, multi user/single user log on - 2/3 support locally. Power Supply (Watts) 65 - Carry case No - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gaurav Dogra 411044, PCMC Commercial Complex, Sanjay Kale Sabhagraha, Sector 28, Pradhikaran, Akurdi 15 15 EMD Required No ePBG Required No
hopper or tipper Experience with Gov. Required 1 Year (s) Hopper Or Tipper ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Garbage Tipper - Main Engine Capacity (cc) 702 Make of Chassis Garbage Tipper Type of Chassis Frame Ladder Type Frame With Inverted Hat Section Long Members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/6 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM BHP@rpm - Engine Torque Max, @ rpm (N- M@rpm) 39 NM @ 1800 - 2200 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4X2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - 2/6 Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels With Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic Type of Clutch 170mm Single Plate Dry Friction Diaphragm Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151 F03 Dtd. 17-02-2017 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR mm - 3/6 Size Of Rear Tyres (mm) 145 R 12 - 8PR mm - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro/dental/Equivalen t Reputed Make/isi make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - If Yes Auxiliary Diesel Power (HP@rpm) NO Auxiliary Diesel Engine Transmission NO Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in true - 4/6 Control Panel Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra Gangadhar Chochamkar 442902, Municipal Council Bhadrawati Dist.Chandrapur 1 15 EMD Required No ePBG Required No
common and special proofed tarpaulins in square mtrs Common And Special Proofed Tarpaulins In Square Mtrs ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE AND SPECIFICATION Type of Tarpaulin Special proofed (Confirming to IS: 2789: 1972: Latest) Common proofed (Confirming to IS: 2089: 1977: Latest), Special proofed (Confirming to IS: 2789: 1972: Latest) CERIFICATION BIS Marking false CM/L No NA - Whether registered with registreation Authority Defence NSIC, Defence, No Registration Certificate No. and Date NA - Validity of Registration Certificate NA - COLOUR Colour Olive green for special proofed tarpaulins - BASIC FABRIC Basic Material Cotton Duck 610gms/mtr square conforming to variety No-2 of IS-1422-1983: Latest - FABRICATION AND PROOFING Fabrication and proofing Fabrication of special proofing as per IS: 2789. 1972 : latest and Fabrication and common water proofing as per IS: 1/4 basic material of special proof tarpaulin as per IS 6803- 1972: latest excluding clause no 3.2.6.1 for pressure head test for special proof tarpaulins 2089, 1977: latest for common water proof tarpaulins, Fabrication of special proofing as per IS: 2789. 1972 : latest and basic material of special proof tarpaulin as per IS 6803- 1972: latest excluding clause no 3.2.6.1 for pressure head test for special proof tarpaulins Sewing thread As per clause No. 4.1.1.2 of IS:2089-1977:latest, 165 Tex.x 3 linen for common water proof tarpaulins As per clause No. 4.1.1.2 of IS:2089-1977:latest, 165 Tex.x 3 linen for common water proof tarpaulins, As per clause No. 4.1.1.2 of IS:2089-1977:latest rot proofed cotton sewing thread to Specn. No. IS:1720-1978 : latest, variety No. 18 for common water proof tarpaulins, variety No. 42. for common water proof tarpaulins, As per clause No. 3.1.3 of IS;2789/1972 :latest, rot proofed waxed linen thread (variety No.1 of IS; 2196-1985, latest) for special proof tarpaulins, rot proofed cotton sewing thread to specns. No. IS;1720-1978 : latest variety No. 18 for special proof tarpaulins, rot proofed cotton sewing thread to Specn. No. IS:1720-1978 : latest, 2/4 variety No. 42. for special proof tarpaulins Seam joint Hook Flat, Hook DIMENSIONS Length 16.6 - Width 15.9 - EYELETS Size of eyelets size 30 of IS 4084 - Material of Eylets Aluminium passivated - Number of eyelets (Nos) 36 - LASHING ROPES Lashing ropes Indian sisal (Aloe fibre) 3 strands hawser laid to specification No.:IS:1 321(Part-1)/2003, latest (untarred variety) for general construction and sizes - Length of Lashing Ropes ( min ) 1.5 - Diameter of lashing rope 12 - Number of Lashing Ropes (Nos) 6 - OTHER REQUIREMENTS Quantity supplied shall not exceed the quantity ordered YES - One square meter of Tarpaulin shall constitute as one unit for selling YES - TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. false Name of the Lab NA - Address of The Lab NA - Test Report No. NA - Test Report Date NA - Test Report to be furnished to buyer on demand, if claimed to be available Not applicable - * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Pankaj Sharma 182143, 5089 company Army Service Corps Composite 10 15 EMD Required No ePBG Required No
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 2000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500, 500.0 Physical Characteristics Brightness in % 85 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 40 - Opacity in % 92 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 270 - 1/2 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 2.1 - Stiffness CD 1.1 - Surface Strength Dennison (Wax Pick) >= 12 A 14 A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pandya Hemang 391320, GUJARAT REFINERY, INDIAN OIL CORPORATION LIMITED, ADMIN BUILDING, MATERAILS DEPARTMENT - PURCHASE, P.O. : JAWAHAR NAGAR, VADODARA-391320 2000 15 EMD Required No ePBG Required No
lead acid battery Lead Acid Battery ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Statio nary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationar y Valve Regulated Lead Acid Batteries conforming to IS:15549 2005, Lead-Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257 1995, Lead-Acid Storage Batteries for 1/3 Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container ABS Hard Rubber, Fibre Reinforced Plastics (FR P), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 88 88 Warranty (Years) 1 Year 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 6300 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab BANGALORE - Name of the Lab CPRI - Test Report No. 2554JOZLWRT255 - Test Report Date 11/9/2017 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pankaj Sharma 182143, 5089 company Army Service Corps Composite 8 15 EMD Required No ePBG Required No
hopper or tipper Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Box body Tipper - Main Engine Capacity (cc) 1396 Make of Chassis Tata Motors Type of Chassis Frame Ladder type cranked frame with inverted hat section long members & welded cross members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/6 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 71 BHP @ 4000RPM - Engine Torque Max, @ rpm (N- M@rpm) 140 Nm @ 1800-3000 RPM Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Independent, strut type - Type of Rear Axle and Suspension System Semi-elliptic leaf spring - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - 2/6 Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disc Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated - Rear Vehicle Brake Drum Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated, LSPV Fitted on Rear Brakes. Type of Clutch 200 mm, Single Plate Dry Friction Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) 165 R14 LT 8PR - Size Of Rear Tyres (mm) 165 R14 LT 8PR - Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - 3/6 Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or Equivalent Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) No Auxiliary Diesel Engine Transmission 0.0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - 4/6 Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashlesha Ramdas Bhagat 440023, WADI NEAR OLD PETROL PUMP AMRAVATI ROAD 2 15 EMD Required No ePBG Required No
Dry Erase Writing Boards Dry Erase Writing Boards ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Performance Parameters Purpose of writing board Writing Writing, Writing cum Projection screening Material of Board Ceramic Steel Ceramic Steel Material of Frame Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Material of Back Cover Galvanized steel sheets conforming to IS:277 Galvanized steel sheets conforming to IS:277 Thickness of Back Cover 12 - Thickness and Material of back support (conforming to IS:12406) 9 Top surface coating thickness of sheet in mm 2 - % Gloss at 60 deg.head (min.) 80% for white colour only 80% for white colour only, 2% green, blue, black colours, 60% for white colour only Surface suitable for Dry marker ink for Dry marker ink for 1/4 writing with white board only white board only, chalk for colour & black board Back surface coating thickness of sheet (min) 2 Thickness and material of top steel sheet Having Viterious Enamelled coating on both side 2 Excellent Erasability without leaving impression Yes - Warranty in years 1 1, 2, 3, 4, 5 Dimensional parameters Dimensions of the Board in feet (width x height ) 4x 6 1.5 x 2, 2 x 3, 3 x 4, 4x 6, 4 x 8, 4 x10, 4 x 12 Dimensions of Boards in mm x mm (width x height ) 1200 X 1800 450 X 600, 600 X 900, 900 X 1200, 1200 X 1800, 1200 X 2400, 1200 X 3000, 1200 X 3600 Wall thickness of Anodized Aluminium Frame (Min) in mm 1.2 1.2 Colour of Board White Green, Black, White Frame Width in mm 20 20 Additional Items One Magnetic Type Eraser No - 4 nos dry erasable ink markers(Green/blue/re d/Black) No - one set of 6 Pcs paper holding magnets for white board only false - one box of 50 nos non dust chalks sticks false - one dry wipe duster 3 nos spare sponges for colour and black board false - Reports Availability of Type Test Reports of the product from Central Govt/NABL/ILAC accredited Lab showing compliance to the specification No YES, No Test Report No - - 2/4 Test Report Date - - Name of the Lab - - Complete Address of the Lab - - copy of test reports to be furnished to the buyer on demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Yogesh Kumar Rana 732127, 36 Bn BSF, 17 Mile Baishnabnagar, PO- Chamagram 10 15 EMD Required No ePBG Required No
Dry Erase Writing Boards Experience with Gov. Required 1 Year (s) Dry Erase Writing Boards ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Performance Parameters Purpose of writing board Writing Writing, Writing cum Projection screening Material of Board Ceramic Steel Ceramic Steel Material of Frame Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Anodized extruded Aluminium alloy hollow section of designation 63400 conforming to IS: 1285 Material of Back Cover Galvanized steel sheets conforming to IS:277 Galvanized steel sheets conforming to IS:277 Thickness of Back Cover 0.25 - Thickness and Material of back support (conforming to IS:12406) 9 Top surface coating thickness of sheet in mm 0.11 - % Gloss at 60 deg.head (min.) 80% for white colour only 80% for white colour only, 2% green, blue, black colours, 60% for white colour only 1/3 Surface suitable for writing with Dry marker ink for white board only Dry marker ink for white board only, chalk for colour & black board Back surface coating thickness of sheet (min) 0.03 Thickness and material of top steel sheet Having Viterious Enamelled coating on both side 0.3 Excellent Erasability without leaving impression Yes - Warranty in years 1 1, 2, 3, 4, 5 Dimensional parameters Dimensions of the Board in feet (width x height ) 4x 6 1.5 x 2, 2 x 3, 3 x 4, 4x 6, 4 x 8, 4 x10, 4 x 12 Dimensions of Boards in mm x mm (width x height ) 1200 X 1800 450 X 600, 600 X 900, 900 X 1200, 1200 X 1800, 1200 X 2400, 1200 X 3000, 1200 X 3600 Wall thickness of Anodized Aluminium Frame (Min) in mm 1.2 1.2 Colour of Board White Green, Black, White Frame Width in mm 20 20 Additional Items One Magnetic Type Eraser Yes - 4 nos dry erasable ink markers(Green/blue/re d/Black) Yes - one set of 6 Pcs paper holding magnets for white board only false - one box of 50 nos non dust chalks sticks false - one dry wipe duster 3 nos spare sponges for colour and black board false - Reports Availability of Type Test Reports of the product from Central Govt/NABL/ILAC accredited Lab showing compliance to the specification YES YES, No 2/3 Test Report No - - Test Report Date - - Name of the Lab - - Complete Address of the Lab - - copy of test reports to be furnished to the buyer on demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 6 15 EMD Required No ePBG Required No
hopper or tipper Average Turn Over of Last 3 Years 1000 Lakh (s) Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, GARBAGE TIPPER - Main Engine Capacity (cc) 702 Make of Chassis TATA ACE FL CHASSIS Type of Chassis Frame Ladder Type Frame with Inverted Hat Section Long Members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission bs iv bs iv, BS-III (only for 1/5 Complaince Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM BHP@rpm - Engine Torque Max, @ rpm (N- M@rpm) 39 Nm @ 1800 - 2200 RPM Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4X2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - 2/5 Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split with Tandem Master Cylinder acting on all wheels with Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic Type of Clutch 170mm Single Plate Dry Friction Diaphragm Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151 F03 Dtd. 17-02-2017 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR mm - 3/5 Size Of Rear Tyres (mm) 145 R 12 - 8PR mm - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 900 - Overall Height of Tipper from Ground (mm) 1609 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro/dental/Equivalen t Reputed Make/isi make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission 0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in true - 4/5 Control Panel Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nikita Shankar Patil 402201, Loknete Datta Patil Bhavan, Alibag municipal council 2 15 EMD Required No ePBG Required No
Vehicle Hiring Service (Long Term)
steel body evaporative coolers-desert cooler Experience with Gov. Required 10 Year (s) Steel Body Evaporative Coolers-desert Cooler ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/TYPE Nominal cooling capacity (CuM/hr@WATT) 5000 Cu.M/hr @ 325 WATT 1800 Cu.M/hr @ 185 WATT, 3000 Cu.M/hr @ 225 WATT, 5000 Cu.M/hr @ 325 WATT, 6000 Cu.M/hr @ 375 WATT, 4000 Cu. m/hr @ 250 Watt Type of Air Cooler Body Steel Body - Type of Fitting Wall Mounted - CERTIFICATION Conformity to Indian Standard IS: 3315 latest - Availability of Test Report from Central Govt/NABL/ILAC acredited lab to prove conformity to specification false - Name & address of the Lab Na - Test Report Number & Date Na - GENERIC Material of Filter panel, Grill, Top of cooler body, cabinet and sump tank ISI marked to IS 277 latest, Galvanized steel sheet with zinc coating - 1/3 not less than 100 gms/sq.metre Thickness of ISI marked Galvanized steel Sheet for Filter panel, Top of cooler body and cabinet 0.8 - Thickness of ISI marked Galvanized steel Sheet for Sump Tank 1 - All internal surfaces Painted with Water Resistant paint to IS 9862 latest Yes - Drain Plug material Brass/SS - Fan Size 500 - Blade Material Aluminium (for 5000/6000 cooling capacity) - Fire Retardant Plastic NA for Al. Blades - Fan Motor ISI marked to IS: 996 latest - Fan Motor 4-pole RPM 1400 - Fan Motor Speeds 3 - Power Factor 0.9 - Submersible Pump Conforming to IS:11951 latest - Thickness of wood wool Pad (mm) 15 - Wire Guard for Pads Yes - Water Level Indicator Yes - Minimum length of ISI marked connecting cable with 3-pin moulded Plug Top, 5/6amps 2.5 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ajay Kumar Chadha 151004, GARRISON ENGINEER ENGINEER PARK BATHINDA 10 15 EMD 2/3 Required No ePBG Required No
Alcohol Based Hand Rub/Hand Sanitizer
hopper or tipper Hopper Or Tipper ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, NA - Main Engine Capacity (cc) 702 Make of Chassis TATA Type of Chassis Frame Conventional Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( 21.5 1/6 declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Main Engine Power BHP@rpm (BHP@rpm) 16 HP @ 3200 RPM - Engine Torque Max, @ rpm (N- M@rpm) 39 NM @ 1800 - 2200 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Rigid Beam Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of Rear Axle and Suspension System Banjo Type Live Axle With Parabolic Leaf Spring & 2 Nos. Double Acting Telescopic Hydraulic Shock Absorbers - Type of BIS MARKED Vehicle Tyre Radial - 2/6 Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake Disc Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels With Automatic Wear Adjusters - Rear Vehicle Brake Drum Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels Type of Clutch Drum Brake Hydraulic, Dual Circuit Diagonal Split With Tandem Master Cylinder Acting On All Wheels - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151F03 Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - 3/6 Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) 145 R 12 - 8PR - Size Of Rear Tyres (mm) 145 R 12 - 8PR - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 650 - Overall Height of Tipper from Ground (mm) 1450 - Body Plate Thickness (mm) 1.5 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or Equivalent Reputed Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) FALSE Auxiliary Diesel Engine Transmission FALSE Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.5 Dumping Height (mm) 350 4/6 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Others - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Jumde 480334, Teen Sher Chowk, Nagar Palika Pandhurna 5 15 EMD Required No ePBG Required No
All in one All In One ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 7th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) Intel Core i7-7700 (3.6 GHz, 4 Cores) Chipset Chipset Q270 - Graphics Graphics type Integrated - Graphic Card Description Onboard Graphics - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 2000 500, 1000, 2000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 16 16 RAM Expandability Upto (GB) 32 8, 16, 32, Not-Available Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Windows 10 1/3 Professional Professional OS Certification Windows - Display Display Size (Inch) 27 27 Type of Display Touch Touch display resolution (Pixels) 3200 x 1800 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 0 - USB Port 3.0 (No.) 4 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 180 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Not-Available - Optical drive External - Stand Standard - 2/3 On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amit Kanwat 110001, Dak Bhawan, Sansad Marg New Delhi- 110001 1 15 EMD Required No ePBG Required No