Dedicated Freight Corridor Corporation Of India Limited Tenders

Housekeeping maintenance work for all station building, DFCCIL quarters premises, IMDs, IMSDs, OCC building premises and Club House premises for 12 months under CGM/PRYJ Unit.

Custom Bid for Services - Annual Maintenance Contract for 02 Years of existing GPS Tracking Devices Similar Category Customized AMC/CMC for Pre-owned Products

Operation and Maintenance of Effluent/Sewage Treatment Plant - Complete System; 4098612; Functional but outside AMC and Warranty

SIGNAL & TELECOM MAINTENANCE WORK, REPLACEMENT/REFIXING WORKS INCLUDING SUPPLY OF MINOR SPARES AND TOOLS FROM UNCHDIH TO NEW CHIRAILAPATHU SECTION & SONNAGAR LINK TO NEW SONNAGAR JUNCTION SECTION OF EASTERN DEDICATED FREIGHT CORRIDOR(EDFC) FOR TWO YEARS.

Dewatering and Cleaning of slush/Mud from RUBs and its approaches at various locations between section New Boraki (DFC Km. 897) to New Makkhanpur (DFC Km. 695) section of EDFC-1 under CGM/Tundla for Twelve months.

Dewatering and Cleaning of slush/Mud from RUBs and its approaches at various locations between section New Bhaupur (DFC Km. 509) to New Makkhanpur (DFC Km. 695) section of EDFC, under jurisdiction of CGM/TDL.

Electrification work of IMSD building at New Umbergaon JS (UBRN) and TW shed at New Palghar CS (PLGN) of Western Dedicated Freight Corridor (WDFC) under CGM/MUM

Turnouts 1 in 12 LH and RH 441 R , 1 in 20 canted thick web switches for 25 T axel load with complete fitting & fastening set switch including weldable CMS crossing including fittings, checkrails, bearing plates, , special bearing plates, MS plate for lead portion, MS Taper Pad, ERC MK-V, GFN liner,Wedge pin , cotter pin, leaf spring, washer, distance block etc including all accessories component set from sleeper no. 1 to 88 (excluding lead portion 60kg rails & PSC Turnouts Sleepers). As per drawing no.EDFC/PRYJ/3419 & EDFC/PRYJ/3422 & all associate drawings

Customized AMC/CMC for Pre-owned Products - OEM; AMARA RAJA 110V IPS; Comprehensive Maintenance Contract (CMC); Quarterly; Yes

Electronic Track and Turnout Gauge

DGR Empanelled ESM Security Services

Robotic Reconditioning of WCMS Crossings, Thick Web Switches, Scabbed Rails, and Wheel Burn Locations in the jurisdiction of CGM/Ajmer Unit.

Supply, Erection, Testing & Commissioning of Automatic Fire Alarm and Detection System (FADS) for system-I SP/SSP/TSS control room building and communication to TPC board DDU at OCC PRYJ through SCADA system for section from DGON to KWDN of DDU Unit under CGM/DDU.

Custom Bid for Services - Comprehensive Annual Maintenance Contract CAMC for the existing 03 sets of Socomec make UPS systems rated 160kVA and 120 kVA installed at DFCCIL OCC Building Prayagraj for a period of 03 years Similar Category Operation & Maintenance of Data Centre Assets

"Comprehensive Bridge Maintenance of all Important, Major and Minor Bridges in jurisdiction of CGM Ajmer Unit"

Comprehensive Annual Maintenance Contract of HASSDAC system of M/sG.G.Tronics India Private Limited inclusive Replacement service of variouscards/modules of HASSDAC system supplied by M/s G.G.Tronics IndiaPrivate Limited this includes preventive maintenance attending andrectification of failure during the emergency this CAMC is for replacement/ repairing of all types of defective card/ modules during CAMC period asper terms and condition of CAMC of SNL-KJYN section of Ambala Unit fora period of 36 month.

Supply, Installation, Testing and Commissioning (SITC) of Automatic Fire Detection Alarm and Suppression System (AFDSS) at DDUN station area including EI Relay Room, Telecom Room, Relay Huts (RH-1 to RH-6), and ERCN Rooms under jurisdiction of CGM/DDU.

ABRASIVE RAIL CUTTING DISC WHEEL STONE, ACD FEMALE, ACD MALE, TELESCOPIC SELF SUPPORTED ALLUMINIUM LADDER, EMERGENCY INFLATABLE LIGHTING EQUIPMENT, BANNER FLAG, BOSCH AIR BLOWER GBL620, BUSH CUTTER, CALLIPERS INSIDE, CALLIPERS OUTSIDE, CHAIN SAW, CHAMFERING KIT, CLIP APPLICATOR, RAIL THERMOMETER, DIGITAL VERNIER CALLIPER, DRAGON TORCH, DYE PENETRAION KIT, FEELER GAUGE, GAUGE LEVEL, GAUGE LEVEL PIE FOR POINTS AND CROSSING, GREASE GRAPHITE IS 408 1981 GRADE O, GREEN FLAG, HAND RAMMER, HYDRAULIC JACK NON INFRINGING TYPE 15 T, LASER DISTANCE METER, MEASURING TAPE 15 MTR, MEASURING TAPE 30 MTR, MEASURING TAPE 5 MTR, MECHANICAL JACK NON INFRINGING TYPE, PAN MORTAR, PATROLMAN STICK, PICK AXE BEATER, PLUMB BOB, POWRAH SPADE, PVC CHAIR, RAIL DRILLING TOOL BIT FOR FOR RAIL DRILLING MACHINE 18 MM, RAIL DRILLING TOOL BIT FOR FOR RAIL DRILLING MACHINE 26.5 MM, RAIL DRILLING TOOL BIT FOR FOR RAIL DRILLING MACHINE 31.5 MM, RAIL TONG, RED FLAG, REMOTE CONTROL HOOTER FOR GANG, RETRO REFLECTIVE TAPE, ROPE, SHOVEL, STAFF FOR PATROLMAN, STRAIGHT EDGE 10 CM LONG, TARPAULIN WATERPROOF, TRICOLOR TORCH, TUBULAR SPANNER, UMBRELLA, WIRE BRUSH, WOODEN BLOCKS, PUNJI, RAIL GRINDING STONE, PRC SLEEPER CHAIN, C CLAMP, VERSINE MEASURING KIT, GAS CUTTING EQUIPMENT, DESTRESSING ROLLER, PIPE WRENCH, BALLAST PROFILE TEMPLATE, PWI KIT, MODIFIED METAL LINER T8255 M, KEYMEN BAG, RAIL DOLLY, CROW BAR, JOGGLED FISHPLATE, 1 MTR FISH PLATE, ADJUSTABLE SPANNER, CAUTION BOARD, SPEED INDICATOR BOARD, TERMINATION BOARD, SAFETY GLOVES, ELECTRONIC DIGITAL TOE LOAD MEASURING DEVICE, GREASE GUN, BREATH ANALYSER, RAIN SUIT, SAFETY SHOES

Turnouts 1 in 12 (LH) 441 R , 1 in 20 canted thick web switches for 25 T axel load with complete fitting & fastening set switch including other items and Turnouts 1 in 12 (RH) 441 R , 1 in 20 canted thick web switches for 25 T axel load with complete fitting & fastening set switch including other items.

220V-400AH and 110V-400AH Low Maintenance Lead Acid Battery Bank 1 set comprising of 2 volt 110 Nos cells and 55 Nos cells in PP-CP container.

Stationary Valve Regulated Lead Acid Batteries (V3)

Customized AMC/CMC for Pre-owned Products - Frauscher Make RDSO approved MSDAC System; Frauscher; Comprehensive Maintenance Contract (CMC); As specified in

Annual Maintenance Contract of Bridges and Allied Structures Under the Jurisdiction of CGM/PRYJ

110V-80AH Low Maintenance Lead Acid Battery Bank , 1 set comprising of 2 volt, 55 Nos cells in PP-CP container with all accessories, complete with Inter Cell Connector, Nuts, Bolts, & Washer, float Guide and Microporous Ceramic vent Plug as per RDSO Spec No. IRS:S-88/2004.

Comprehensive Annual Maintenance Contract (CAMC) for Electronic Interlocking of SIEMENS make inclusive Replacement, service of various cards/modules/accessories of EI system supplied by SIEMENS at 38 locations of UNDN-DDUN section under CGMDDU for a period of 36 months (3 Years).

Provision of Fabrication & Installation of Guard Rails at ROBs, FOBs, etc. under CGM/Tundla Unit.

Toner Cartridges/Ink Cartridges/Consumables for Printers (Q2) in One PC (V2) (Q2) (3 (3 ))

Construction of OHE Gang Sheds with Toilet & Bathroom Facilities for OHE Maintenance Gang at Five Locations, i.e. New DDU, New Unchdih, New Dagmagpur, New Durgawati and New Karwandia Stations under CGM/DDU Unit

Comprehensive Annual Maintenance Contract of HighAvailability Single Section Digital Axle Counter (HASSDAC) System of M/s G.G.Tronics India Pvt. Ltd. Make installed in CP-105 New Boraki & New Boraki-IRDadri block section DFCCIL Tundla for a period of 36 months.

Design, Supply, Erection, Testing & Commissioning of OHE for DDU/RFO under CGM/DDU/DFCCIL Unit.

Manpower Outsourcing Services - Minimum wage - Semi- skilled; High School; Others

Custom Bid for Services - Comprehensive annual maintenance contract of TEMS (Traction Energy Management System) including installations at OCC/PRYJ and lease line from OCC to SEMC Lucknow for 36 Months Similar Category ANNUAL MAINTENANCE SERVICE -DATA CENTER ASSETS

Water Resistant Lubricant for Switch Plate of Point Machine

Supply of Weldable CMS Crossing with welded extended legs by 600mm for 1 in 12 canted Turnout (R441) Left Hand (LH) and Right Hand (RH) 60 Kg rail as per approved drawing No. EDFC/PRY/J/3421-22 and associated drawing, Welded rails for extending leg should be conforming to 1080 HH rail.