Defence Research and Development Organisation Tender Results

Ozone Test Chamber

Water based Aliphatic Polyurethane dispersion, Polycarbodiimide Cross-linker

GRAPHITE RODS

Quantum Amplifier Bundle Software

ConventorWare and MEMS Design Software

Advanced Design System (ADS) Software

Custom Bid for Services - Fabrication Integration, Testing & Trials of Skid Assembly for CMF system Similar Category System Integration Service to Implement IoT Sensor- Based Measurement and Monitoring of Rural Water Supply Systems

Power Generator - DG Set (up to 900 KVA) (Q2) ( ( 3 3 ))

Rugged Field Data Recording and Display

Zone Monitor

Remote Process Monitoring System

Vacuum Chamber Furnance as per specification no. HEMRL/NM/Spec/218

200mm M 20 Bolts, 100mm M 20 Bolts, 80mm M 20 Bolts, 50mm M 20 Bolts, 20mm M 20 Bolts, 100mm M10 Bolts, 80mm M10 Bolts, 50mm M10 Bolts, 30mm M10 Bolts, 150mm M12 Allenkey Screws, 100mm M12 Allenkey Screws, 80mm M12 Allenkey Screws, 50mm M12 Allenkey Screws, 30mm M12 Allenkey Screws, 150mm M10 Allenkey Screws, 100mm M10 Allenkey Screws, 80mm M10 Allenkey Screws, 50mm M10 Allenkey Screws, 30mm M10 Allenkey Screws, 150mm M8 Allenkey Screws, 100mm M8 Allenkey Screws, 80mm M8 Allenkey Screws, 50mm M8 Allenkey Screws, 30mm M8 Allenkey Screws, 20mm M8 Allenkey Screws, 150mm M6 Allenkey Screws, 100mm M6 Allenkey Screws, 80mm M6 Allenkey Screws, 50mm M6 Allenkey Screws, 20mm M6 Allenkey Screws, 10mm M6 Allenkey Screws, 150mm M5 Allenkey Screws, 100mm M5 Allenkey Screws, 80mm M5 Allenkey Screws, 10mm M5 Allenkey Screws, 5mm M5 Allenkey Screws, 100mm M4 Allenkey Screws, 80mm M4 Allenkey Screws, 50mm M4 Allenkey Screws, 30mm M4 Allenkey Screws, 20mm M4 Allenkey Screws, 100mm M8 CSK Screws, 80mm M8 CSK Screws, 50mm M8 CSK Screws, 30mm M8 CSK Screws, 20mm M8 CSK Screws, 150mm M6 CSK Screws, 100mm M6 CSK Screws, 80mm M6 CSK Screws, 50mm M6 CSK Screws, 20mm M6 CSK Screws, 10mm M6 CSK Screws, 150mm M5 CSK Screws, 100mm M5 CSK Screws, 50mm M5 CSK Screws, 40mm M5 CSK Screws, 30mm M5 CSK Screws, 100mm M4 CSK Screws, 80mm M4 CSK Screws, 50mm M4 CSK Screws, 30mm M4 CSK Screws, 20mm M4 CSK Screws, 100mm M2 CSK Screws, 80mm M2 CSK Screws, 50mm M2 CSK Screws, 30mm M2 CSK Screws, 20mm M2 CSK Screws, Teflon Tape, HSS Hack Shaw blade, Fevi bond or Flex Bond -20ml, Emery papers Smooth, Emery papers Medium, Emery papers Rough, belt emery paper smooth, belt emery paper medium, M seal 100g, HSS drill Bits, M2- M21, Heli coil, M2-M12, Thread repair kit, M2 to M6, Heli coil tap set, M2, M3, M4, M5, M6, Industry graded Vacuum Cleaner

PORTABLE LINE ARRAY SYSTEM WITH TWO MICROPHONES

Anti-Backlash Top Pin Assembly, Anti-Backlash Bottom Pin Assembly, Stabilizer Pin Assembly

Speed Goat Real Time Target Machine (RTTM) (as per Technical Specification Table 1, Appendix -Á

data wall display (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6186466 Dated : 05-05-2025 Bid Document 1/9 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 37500 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 39 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : DIRECTOR Dmsrde Kanpur, Department of Defence Research & Development, Office of DG ( NS & M), Ministry of Defence (Director Dmsrde) MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference 2/9 MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Operation and Maintenance of E and M installation and Fire Fighting at DRDO Transit Facility Kolkata under CCE(R and D)East, Kolkata

Repair and Overhauling Service - built up trucks; AMC for Mobile Hydraulic Cranes (5 Nos) for 02 Years; Yes; Buyer Premises

Layer 2 Access Switch (V2) (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete Document required from seller OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2026/B/7071234 Dated : 05-01-2026 Bid Document 1/8 Number of Auto Extension count 3 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 16 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : The General Manager, SF Complex SF Complex DRDO Airport Terminal Building, Jagdalpur - 494001, Dist. Bastar, State: Chhattisgarh (The General Manager, Sf Complex)

FABRICATION AND SUPPLY OF 6 COMPONENT TEST SETUP

Upgradation of Centrifuge Test Facility

Micro/Semi-Micro/Analytical weighing balance (Q2) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience Yes | Complete

Provision of Composite Operation and Annual Maintenance for Various EnM Services, Term Contract, Arboriculture and Repairing of Furniture at Site 23 Acre Complex, Delhi Cantt

PERIODICAL SERVICES OF ASSETS AT 23 ACRES COMPLEX DELHI CANTT

Digital Storage Oscilloscope (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2025/B/6713404 Dated : 22-09-2025 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 41 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : DIRECTOR Defence Laboratory, Jodhpur, Department of Defence Research & Development, Office of DG ( NS & M), Ministry of Defence (Director) Splitting

Hydraulic Nuts as per spec no ARDE/EMRG/10/HN01.

Nitrogen Gas, 99.995% Purity, Helium Gas

Artificial EM Material Glass Fabric

Custom Bid for Services - Work package for Project Management and associated technical activities Similar Category Non IT Professional Service (version 2)

Drawer Type Mobile Phone Locker Cabinet, Vertical Type Laptop Lockers Cabinets

Powder feeding system as per Spec. No. HEMRL/GPS/PC/HEMRL-1445/PFS/Nov2025/01

Series 350 UHV Gauge Controller

Tantalum carbide pack size 50gm, Hafnium IV carbide powder pack size 25gm, Tantalum disilicide pack size 50gm, Niobium carbide pack size 100gm, Silicone dioxide pack size 100gm, Titanium IV carbide powder pack size 25gm, Molybednum disilicide powder pack size 250gm, Titanium silicide pack size 250gm, Zirconium oxide monoclinin pack size 500gm, Zirconium boride pack size 250gm, Graphite powder pack size 1kg, Aluminium oxide powder pack size 500gm, Hafnium IV oxide powder pack size 100gm, Tantalum oxide pack size 100gm

Explosive Thermochemical Equilibrium Code (EXTEC 3.0 or latest) with compatible workstation

Scanner (V3) (Q2), Computer Printer (V2) (Q2) (3 (3 ))

SITC OF LED LIGHTS

Periodical Maintenance Services to Furniture including Petty repairs, Painting and Polishing of Wooden and Steel Furniture in Transit Facilities and Scientist Hostels at Jagdalpur, Sitte-G, Raipur and Sunabeda

Washing Machine of 21/12 kg

DIESEL ENGINE OPERATED FORKLIFT - 5 TON CAPACITY, HAND PALLET TRUCK, BATTERY OPERATED PLATFORM TRUCK, BATTERY OPERATED MOBILE SCISSOR LIFT

Customized AMC/CMC for Pre-owned Products - Non- Comprehensive Annual Maintenance Contract of Universal Testing Machine System (Capacity 100kN) for 2 years; UT- 20-0100; Annual Maintenance Contract (AMC); As per Scope of Work; No

Up gradation of UVDR Test Rig for LCA MK2

SAR Post Processing Software SARproz

Toner Cartridges/Ink Cartridges/Consumables for Printers (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

As per tender document

Custom Bid for Services - Ring rolling of Ti-6242S as per Specification and Scope of work-01 job Similar Category Operation And Maintenance Of Other Machines And Plants

Manpower Outsourcing Services - Minimum wage - Unskilled; As per scope of work (Annexure-II attached); Admin

Manpower Outsourcing Services - Minimum wage - Unskilled; Under Matric; Others

High Temperature glue for HTF AD 1800 1

Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (Q3) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete