Loading
Loading…
Loading…
90 results • Latest
Augmentation of DDA Park with 4 mtr. poles ,45 Watt LED street light and allied accessories at park no. 7, Sec-6 under HD-Dwarka.
Supplying, Fabrication and Installation of 4 mtr. high pole made out of 65 mm dia NB, B class G.I pipe ISI marked duly welded with MS base plate of size 300 mm x 300 mm x 12 mm thick and supported with 4 nos stiffner made out of 130mm x 60 mmx 5 mm thickwith suitable earth stud on base plate and collar type mounting arrangement (single or duble fitting type both) for light fitting on the pole, making suitable size hole in pole at a height of 2.5 metre from base plate for cable entry/exit, painting & numbering of pole, making suitable size hole in base plate for cable entry/exit into the pole and fixing the pole on the foundation with the nuts-bolts, washers etc. complete as required.
Providing of 08 Nos. Beldar (Un-skilled) for Hort. work at PVSC/DDA
Providing of 08 Nos. Beldar (Un-Skilled) for maintenance of parks, lawn area, hedges, bushes and other beautification of the PVSC (08 nos x 12 months = 96 nos.)
Providing 06 Nos. Grounds man for M/o Play Grounds, Practice Pitches, Courts, facilities etc (seven days a week) and 01 No. Plumber for plumbing work (Six days a week) at PVSC
Providing 06 Nos. Groundman (skilled) at PVSC = 6 Nos. x 12 Months x 7/6 (For reliever Charges ) (Seven days a week)
Providing of 01 Nos. Billiard Marker at Paschim Vihar Sports Complex/DDA.
Providing of 01 Nos. Billiard Marker (skilled) = 1 Nos. Billiard Marker x 12 Months
Cleaning of septic tank of DDA Community Hall at Sriniwaspuri during the F.Y. 2025-26.
Cleaning of septic tank by suction jetting machine 1500 PSI machine including POL and operator and 1 skilled labour as per direction of engineer in charge (as and when required).
Repair and making of expansion joints leak-proof of Gr I to IV Mega Housing, D-6, Vasant Kunj, New Delhi-70.(Specialized Work).
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. (a) Anodised aluminium sheet 2.5 mm thick (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) kg 680.55