Loading
Loading…
Loading…
2,900 results • Latest
revolving chair
plastics bib taps pillar taps angle valves and stop valves
Vehicle Hiring Service (Long Term)
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 3 Year (s)
Human Resource Outsourcing Service
Security Manpower Service
Multifunction Machines
ambulances ( PAC Only )
OEM Cartridge/Consumable ( PAC Only ), OEM Cartridge/Consumable ( PAC Only ) MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 4 ) ( Under PAC ) Make hp Model hp70ablackoriginallaserjettonercartridgeq7570a c Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP Black Contract Original LaserJet Toner Cartridge (HP 70A Black Original LaserJet Toner Cartridge, Q7570A) * 1/4 Corresponding Part number/code Q7570AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M5025 MFP Printer, HP LaserJet M5035 MFP Printer, HP LaserJet M5035x MFP Printer, HP LaserJet M5035xs MFP Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 15000 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Badalkumar Kesawalekar 400010, MAZAGON DOCK SHIPBUILDERS LIMITED, MATERIALS DEPARTMENT, DOCKYARD ROAD, MUMBAI - 400010 4 15 OEM Cartridge/Consumable ( 2 ) ( Under PAC ) Make hp Model hp30ablacklaserjettonercartridgecf230a Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 30A Black LaserJet Toner Cartridge * Corresponding Part number/code CF230A * Printer Model number/numbers for which Cartridge is HP LaserJet Pro M203d Printer, HP LaserJet Pro M203dn Printer, HP * 2/4 suitable LaserJet Pro M203dw Printer, HP LaserJet Pro MFP M227fdn Printer, HP LaserJet Pro MFP M227fdw Printer, HP LaserJet Pro MFP M227sdn Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1600 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Badalkumar Kesawalekar 400010, MUMBAI - 400010 2 15
hand cleaner soap
Metal Shelving Racks
platform truck Platform Truck ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Conformity to Indian Standard IS:10311 latest IS:10311 latest ISI Marking No Yes, No CM/L number(if Yes) - * Rated load Capacity (Kg) 2000 2000 Make - * Model No - * Battery operated Yes * Type of Plateform Truck Fixed Fixed No. of Wheels (nos.) 4 4, 4.0 Min Power Rating of DC Motor (Kw) 2.6 2.6, 3.6 Rated voltage of DC Motor (Volts) 36 36, 48 Confirmity to Indian Standard for DC Motor IS 10517-1983(Appendi x-A) * 1/4 Drive Gear * Tubular Lead Acid Traction Battery of minimum 299 Ah capacity @ 5 hr discharge Yes Yes Conformity to Indian Standrad for Traction Battery IS:5154:1980 latest * Battery Charger make - * Battery Charger model - * Minimum required charging current (Amp) 40 * Battery Charger shall be capable of charging fully discharged battery (up to 80%)in 10 hrs plus 2 hrs of cooling Yes * Overall Truck Size (LxWxH) (mm) - * Size of Platform (LxWxH) (mm) - * Platform Height (mm) 655 655.0 Seating Height from ground (mm) 655 655.0 Number of Seats (Nos.) 2 Any applicable numeric value Operating Floor Height (mm) 655 655.0 Minimum Turning Radius (mm) 3250 Any applicable numeric value Drive Motor Make - * Drive Motor Model - * Drive Motor Rating - * Controller Make - * Controller Model - * Steering System Type - * Transmission Type - * Front Suspension Type - * Rear Suspension Type - * No. of Head Lights (Nos.) 2 Any applicable numeric value Ground clearance 250 250.0 2/4 (mm) Front Axle Type - * Type of Service Brake - * Type of Parking Brake - * Maximum Speed in unladen condition (Km/hr) 9 Any applicable numeric value Maximum Speed in laden condition (Km/hr) 7 Any applicable numeric value Wheel Base (mm) 1830 Any applicable numeric value Wheel Track (mm) 1080 Any applicable numeric value Type of Tyre Solid Solid Tyre Size (mm) 535 535, 535.0 Detailed list of spares for 3 years shall be provided and supplied free of cost with the equipment Yes * Tare weight of Platform Truck (Kg) 1210 Any applicable numeric value Certification Paramerters Availability of complete & satisfactory test Report from Central govt/NABL/ILAC accredited laboratory Yes Yes Test Report Date - * Name of lab where test conducted - * Test certificate No - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nishith Dwivedi 441906, EO SECTION, ORDNANCE FACTORY BHANDARA 1 30
Televisions
Gum (Paper Adhesives, Liquid Gum and Office Paste Type)
LED Luminaire (For Road and Street Lights) MSME Exemption For Years Of Experience And Turnover Yes LED Luminaire (For Road And Street Lights) ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated 60W * 1/7 Power Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * 2/7 Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED IP66 * 3/7 section and driver section) as per IS:10322 (Part 1):1982 latest Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name Engraved/Embossed * 4/7 and and brand on the aluminium die cast body " Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Yes * 5/7 Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 150 15
Notebook Computers-laptop
Computer Paper
office suite software - MS Office etc ( PAC Only ) Experience with Gov. Required 3 Year (s) MSME Exemption For Years Of Experience And Turnover Yes Office Suite Software - MS Office Etc ( 9 ) ( Under PAC ) Make microsoft-msoffice Model microsoftofficeproplus2016snglolpc Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values BASIC INFORMATION OF OFFICE SUITE SOFTWARE(GOLDEN) Product Type Proprietary Suites open source suites, Proprietary Suites Name of Software OfficeProPlus 2016 SNGL OLP C * Name of the OEM Microsoft * OEM Model/Part No 79P-05551 * Product Id of OEM 79P-05551 * Date of Launch of Version 22 September 2015 * FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Proprietary Suite microsoft office suite * Open Source Suite Not Applicable apache open office, calligra suite, libre 1/5 office, onlyoffice desktop editors, wps office, Not Applicable Type of licensing users based core based, users based, socket based, concurrent based, Open Source, Perpetual, Subscription, Renewal of licence for 1 year No of days Training Provided at Site 0 0, upto 5, 6 to 10, 11 to 20, 21 TO 30 Number of Years upto which Support is available from OEM/Franchise online 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Word Processor true * Spreadsheet true * Presentation Tool true * Drawings and Diagrams true * Database Access true * One - Click Export to PDF true * Accessibility true * Support for many native languages true * Open XML File Format true * 3rd Party Add -ons true * XML File Filter Tool true * ActiveX Control true * Writing Support true * Advanced path editing tool true * Gradient and pattern tools true * Files and Printing true * Editing and Formatting true * Complex Documents true * Graphics true * Language Tools true * Manage Projects false * Collaboration over true * 2/5 Same Platform Suite Billing true * Schedule meetings & Events true * Queries true * Forms true * Reports true * Relationships true * Connects with macros Macro Recorder true * Advance data manipulation true * Compatability with SQL/MySQL Integration true * Built in Spell Checker Grammer & Style true * Dictionary/Theasaurus true * Templates true * Formula Calculation Function true * Graphing Tool true * Pivot Table/Tables true * Micro programming language true * Visual Basic Language true * Slide Transitions true * Equation Editor true * Common Regional languages true * Themes true * Version Information true * Web Apps true * Azure Marketplace Connector true * Power View true * Scanned Images true * Auto Discover true * Cached Exchange Mode Sync Slider true * Exchange Server Support true * 3/5 Outlook Social Connector true * People Pane true * PRF Files true * HTML Files true * Live Preview true * Blogging true * Research Button true * SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Processor Speed Required 1 gigahertz (Ghz) or faster x86- or x64-bit processor with SSE2 * Hard Disk Space Required 3.0 GB available disk space * RAM Size required 1 GB RAM (32 bit); 2 GB RAM (64 bit) * Operating Systems Supported Windows 7 and above * GENERIC PARAMETERS OF OFFICE SUITE SOFTWARE Free Upgradation to Higher Version within support period yes * Valid Licence copy to be provided yes * Software supplied through url link * List of items included in the package Software License of Office ProPlus 2016 * Number of Devices Supported for Each User License 1 * Details of Government Department email, phone no Of concerned authority where Appliance installed for above NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Badalkumar Kesawalekar 400010, MAZAGON DOCK SHIPBUILDERS LIMITED, MATERIALS DEPARTMENT, DOCKYARD ROAD, MUMBAI - 400010 9 15 4/5
LED Luminaire (for Flood Light) MSME Exemption For Years Of Experience And Turnover Yes LED Luminaire (for Flood Light) ( 35 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 55W 55W 1/7 Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP65 IP66, IP65, IP67 Mounting brackets (included) Adjustable * Warranty for free replacement (in Years) 2 * ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * Total Harmonics Distortion (in %age) ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥70 * Beam Angle ≥120 * Optic lense materal (UV stabilised) (Write NA for without optic lense supply) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Capacitor shall be rated for a temperature of Yes * 2/7 105 deg. celsius or better Junction temperature * Operating temperature range -20 deg C to +50 deg C * Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant epoxy powder coated Yes * All fastners must be of stainless steel Yes * The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes * Extruded silicon loop gasket shall be Yes * 3/7 provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm * Light Source SMD LED Chip as per LM 80/IS16106 * MARKING "Manufactures Name and and brand on the aluminium die cast body Engraved/Embossed * Manufacturer’s name, model number, serial number Yes * 4/7 Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * 5/7 Availability of test Report from Central Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report on demand by buyer/consignee Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 K Chandra Mohan 743144, PO - Ichhapur Nawabganj, North 24 Parganas 35 30
water storage tanks MSME Exemption For Years Of Experience And Turnover Yes Water Storage Tanks ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes * ISI Marked true true CM/L No 8448084 * Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank, Rectangular Loft Tank Number of Layers Double Layer Double Layer Capacity Capacity of the Tank (Litres) 10000 10000 Dimension Dimenstion of Tank as per IS 12701(latest) Yes * Uses Uses Out Door Use Out Door Use, In Door Use Test Reports Availability of Test Reports from Central Govt./State Yes * 1/3 Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification Test Report No 205 B * Test Report Date 06/09/2012 * Name of the Lab CIPET * Address of the Lab Panipat * Test Reports to be furnished to the buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 4 30
Hard disk drives MSME Exemption For Years Of Experience And Turnover Yes Hard Disk Drives ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Type of Drive SSD SSD Capacity of Drive (GB) 6000 6000 Media Diameter (cm) 8.9 * Rotational Speed (rpm) 5400 * Interface Type SATA * Synchronous Transfer Rate (Maximum) (MB/s) 175 * Buffer (MB) 64 * Cache (MB) 64 * Rated Power (Watt) 1.75 * Rated for 24/7/365 operation Yes * Physical Size(Height) (mm) 26.1 * Physical Size(Width) 101.6 * 1/3 (mm) Operating Temperature Range (Degree C) 30 * Performance (Sequential Read) (MB/s) 5.3 * Performance (Sequential write) (Mb/p) 5.3 * Warranty (Years) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akhilesh Kumar 482005, Ordnance Factory Khamaria, Jabalpur 10 30
plywood
plywood
camera for video conferencing system MSME Exemption For Years Of Experience And Turnover Yes Camera For Video Conferencing System ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Camera for Video Conferencing System Camera without Codec * Type of Camera PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM, Non PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM Resolution Full HD(1920 x 1080 progressive signal) Full HD(1920 x 1080 progressive signal) Frame Rate (fps) 30 fps 30 fps, 60 fps Zoom Range Optical 10X 3X, 5X, 10X, 12X, 20X, 30X, NA Zoom Range Digital 10X 2X, 3X, 4X, NA Field of View (Degree) 90 * Pan Range (Degree) 260 * 1/3 Tilt Range (Degree) 130 * Type of Sensor CMOS * Camera Positioning Facility Preset Automatic Voice- activated, Movement- activated, Preset, Manual Input/Output Port USB 3.0 * Camera Control (focusing, brightness, and white balance) Mannual * Minimum Illumination Required NA * SNR N/A * PoE No * PoE+ No * BIS Registration under CRS of Meity Yes * If yes, BIS Registration Number and its validity - * UL/CE certification No * UL/CE certificate Number (Furnished when demanded by buyer ) - * Operating temperature Range (Degree C) 45 * Operating humidity (%RH) 44 * Availability of test reports to prove conformity to the specifications (Furnished when demanded by buyer ) Yes * Installation and commissioning Yes * On SIte OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devendra Kumar Mishra 461114, CENTRAL PROOF ESTABLISHMENT ITARSI (MP) NH-69 1 15 2/3
OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 126 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP Black Contract Original LaserJet Toner Cartridge (HP LaserJet (CE505A) Black Print Cartridge 05A) * Corresponding Part number/code CE505AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet P2035 Printer, HP LaserJet P2035n Printer, HP LaserJet P2055d Printer, HP LaserJet * 1/3 P2055dn Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2300 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PANKAJ SINGH 440021, Ordnance Factory Amabajhari, Defence near Defence Project Post office 126 15
laundry soap MSME Exemption For Years Of Experience And Turnover Yes Laundry Soap ( 3000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 285:Latest Yes * ISI Marking No Yes, No CML Number NA * Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes Test Report Number 7903 * Test Report Date 8-8-2015 * Name of the Lab EPIP * Address of the Lab EPIP-PHASE-1 * Type and Fragrance Type Type 1 (Pure Soaps) Type 1 (Pure Soaps) Fragrance Rose * 1/3 Weight and Packing Weight of Bar/Cake (gms) 250 250 Number of Bars in a Pack (Nos) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 3000 15
waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin MSME Exemption For Years Of Experience And Turnover Yes Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Utility Domestic Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA * Class confirming to IS:12402 (For Public Dustbins) NA * Material Stainless steel HDPE, LDPE, LLDPE, Corrosion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining bin) CAPACITY Bin Capacity (Volume) (Ltrs) 80 Litres * 1/3 DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) NA * Weight of Dustbin (Complete unit) (Grams) 25000 * CONSTRUCTIONAL Colour other than green/blue * Wheel Lock Without * Load carrying Capacity (Kgs) 50 * Wall Non- Perforated * Lid removable * Handle Without * Wheel Without * Wheel Material NA * Towage Provision no * Gripping Provision NA * Plugged outlet for washing & draining Without * UV Resistant yes * Dust Bin stand with * No. of Compartments in the Bin single * CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes * Test report number DSL/PROD/1292/1805/3 854 * Test report date 11.05.2018 * Name and address of lab DHATU SPECTRO LAB, A 79, WAZIR PUR, DELHI * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 10 15
waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin MSME Exemption For Years Of Experience And Turnover Yes Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 17 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA * Class confirming to IS:12402 (For Public Dustbins) NA * Material Stainless steel HDPE, LDPE, LLDPE, Corrosion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining bin) CAPACITY Bin Capacity (Volume) (Ltrs) 120 Litres (as per IS: 12402 Pt1 and 2 120 Litres (as per IS: 12402 Pt1 and 2 1/3 DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) NA * Weight of Dustbin (Complete unit) (Grams) 3000 * CONSTRUCTIONAL Colour other than green/blue * Wheel Lock Without * Load carrying Capacity (Kgs) 100 * Wall Non- Perforated * Lid Swing type * Handle Without * Wheel Without * Wheel Material NA * Towage Provision no * Gripping Provision NA * Plugged outlet for washing & draining Without * UV Resistant no * Dust Bin stand with * No. of Compartments in the Bin single * CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes * Test report number HGT-28762/18-19 * Test report date 30/01/2018 * Name and address of lab CAS Lab, Delhi * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 17 15
Drinking Water Cooler
OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 80A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CF280A * Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 400 M401d Printer, HP LaserJet Pro 400 M401dn Printer, HP LaserJet Pro 400 M401dne Printer, HP LaserJet Pro 400 * 1/3 M401dw Printer, HP LaserJet Pro 400 M401n Printer, HP LaserJet Pro 400 M425dn MFP Printer, HP LaserJet Pro 400 M425dw MFP Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2700 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Sukdeo Medhe 425203, ORDNANCE FACTORY BHUSAWAL 20 30
LED Luminaire (For Road and Street Lights) MSME Exemption For Years Of Experience And Turnover No LED Luminaire (For Road And Street Lights) ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated 90W 90W 1/7 Power Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * Warranty for free replacement (in years) 3 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * 2/7 Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +50 deg C -10 deg C to +50 deg C, 20 deg. C to +50 deg. C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED section and driver IP66 * 3/7 section) as per IS:10322 (Part 1):1982 latest Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the Engraved/Embossed * 4/7 aluminium die cast body " Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab Yes * 5/7 NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 50 60
OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge * Corresponding Part number/code Q2612AC * Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP * 1/3 LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Sukdeo Medhe 425203, ORDNANCE FACTORY BHUSAWAL 150 30
OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP * 1/3 Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Sukdeo Medhe 425203, ORDNANCE FACTORY BHUSAWAL 150 30
OEM Cartridge/Consumable MSME Exemption For Years Of Experience And Turnover Yes OEM Cartridge/Consumable ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CE278AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer * Yield of the Cartridge 2100 * 1/3 as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Sukdeo Medhe 425203, ORDNANCE FACTORY BHUSAWAL 15 30
diesel generators- DG Sets MSME Exemption For Years Of Experience And Turnover No Diesel Generators- DG Sets ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 125 125 (or higher) No of Phase - Three Phase ENGINE Make of Engine - * Model Number of Engine - * Capacity of Engine (cc) - * Engine Power (kWm) - * ISI Marking to IS :10001 for engine false * BIS license No, if applicable - * Type of Engine cooling Liquid Cooled Liquid Cooled Type of governer Electronic Electronic (or higher) 1/4 Class of governer A1 A0, A1, A2 (or higher) Number of cylinders (nos) 6 * No of Strokes (nos) 4 * Rated RPM of Engine (RPM) - 1500 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 * Specific Fuel Consumption (gm/kWh) - * Starting voltage (volt) 24 * ALTERNATOR AC GENERATOR(ALTER NATOR) Make - * AC GENERATOR(ALTER NATOR) model Number - * Rating of AC Generator (KVA) 125 * Power Factor of AC generator 0.8 * Efficiency at rated Power factor at 75% of full Load 92.8 * Compliance of Alternator to IS:13364(part-1) Yes * Type of alternator Brushless * Voltage Regulation Grade VG 3 * Alternator IP Rating IP 23 * Class of Insulation H * CONTROL PANEL Control Panel Manual Manual IP Rating of Control Panel IP 53 * ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 (or higher) Thickness of Foam 50 * Density of Foam for sound insulation 28 * Noise level at 1 meter (dB) 75 * BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high * 2/4 cranking performance Battery capacity (Ah) - * No of batteries 2 * TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes * Test Report number and date(Engine) - * Name and address of laboratory(Engine) - * Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes * Test Report number and date(Alternator) - * Name and address of laboratory(Alternator) - * DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes * WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Any applicable numeric value Installation & Commissioning With Installation With Installation Agreed to STC of the Product Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 1 60
water storage tanks MSME Exemption For Years Of Experience And Turnover No Water Storage Tanks ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes * ISI Marked true true CM/L No 8472788 * Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank Number of Layers Double Layer Double Layer Capacity Capacity of the Tank (Litres) 500 500 Dimension Dimenstion of Tank as per IS 12701(latest) Yes * Uses Uses Out Door Use Out Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab Yes * 1/2 covering all the Declared Parameters as per IS Specification Test Report No on demand * Test Report Date on demand * Name of the Lab on demand * Address of the Lab on demand * Test Reports to be furnished to the buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 50 60
low carbon steel wire or mild steel wire for general engineering purposes MSME Exemption For Years Of Experience And Turnover Yes Low Carbon Steel Wire Or Mild Steel Wire For General Engineering Purposes ( 5075 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 280: 2006 (Latest) * Tensile Property Hard * Packing Suitably bound & compactly fastened coil * CONSTRUCTIONAL Type of Galvanized Coating (If Galvanised) Light Heavy, Light, NA Wire diameter (mm) 0.8 * Net Mass of Coil (Kg) 25 10, 15, 20, 25, 30, 40, 50, 100 PERFORMANCE Finish Galvanised Annealed, Annealed, cleaned, limed, Bright Drawn, Dull Grey(Dry Drawn), Coppered, Tinned, Coated & Drawn, Galvanised 1/2 CERTIFICATION ISI Marked false true, false CML. No (If ISI Marked) - * Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity YES * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Randeep Chand 249201, 531 SSTC (GREF), NEAR RAILWAY STATION. RISHIKESH 5075 20
electrical plugs MSME Exemption For Years Of Experience And Turnover Yes Electrical Plugs ( 1000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 1293 Latest * ISI Marked Yes Yes, No CM/L No if ISI marked 'Yes' (if 'No' write NA) - * Rated Current (Amp) 6 6, 16 Rated Voltage (Volt) 250 Volt * Type 2 Pole + Earth (3 Pin Plug) 2 Pole, 2 Pole + Earth (3 Pin Plug) CERTIFICATIONS Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification Yes * Test Report Date - * 1/2 Name of the Lab - * Address of the Lab - * Test Report No - * CONSTRUCTIONAL Type of Plug Rewirable * Insulating Material Poly carbonate * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 1000 15
Kerosene oil fired bukhari complete with exhaust pipes (MHA) Kerosene Oil Fired Bukhari Complete With Exhaust Pipes (MHA) ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Technical specification of the Product As per MHA QR for Kerosene oil fired Bukhari Complete with Exhaust pipes, issued by MHA vide F/No.IV-17 012/34/2009-Prov.I-179 1 dated 3/11/2016 As per MHA QR for Kerosene oil fired Bukhari Complete with Exhaust pipes, issued by MHA vide F/No.IV-17 012/34/2009-Prov.I-179 1 dated 3/11/2016 Availability of MHA QR of Kerosene oil fired Bukhari complete with exhaust pipes Yes Yes Seen and Understood MHA QR of Kerosene oil fired Bukhari complete with exhaust pipes Yes Yes Test Report Availability of Test Report from list of approved laboratory as per MHA QR of Kerosene oil fired - * 1/2 Bukhari Complete with exhaust pipes Test report no - * Test Report Date - * Name of the Lab - * Address of the Lab - * Test report to be furnished to the buyer on demand - true, false * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Randeep Chand 249201, 531 SSTC (GREF), NEAR RAILWAY STATION. RISHIKESH 2 20
door frame metal detector dfmd security metal detector Experience with Gov. Required 1 Year (s) MSME Exemption For Years Of Experience And Turnover Yes Door Frame Metal Detector Dfmd Security Metal Detector ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE/CAPACITY Type of usage Outdoor Outdoor Detection Zones Multiple Zone Multiple Zone Function Detects Ferrous, Non- Ferrous and alloy metals concealed in the body of a person when passsed through the arch way * Number of Horizontal Detection Zones covering full Height 8 * Capacity/throughput rate (person/min) 30 or more * False Alarm rate (%) 3 * DIMENSIONS/WEIGHT Passage Height 2000 * 1/6 Passage Breadth 720 * Passage Width 570 * Weight of the equipment Not more than 80 Kg * DOOR FRAME CONSTRUCTION Construction of Door Frame (Walk-through Arch) Light weight, rigid, laminated side panels and cross piece with ABS plastic boots for panel protection * Material of Walk- through Arch POLYCARBONATE * Provided with base wheels for easy mobility true * Provided with a floor panel to attach both side panels to give stability & rigidity to the structure true * Ramp over the floor panel - Covered with synthetic carpet for long life true * Water proof true * Weather proof true * DETECTION Metals detectable Ferrous, Non-Ferrous, Ferrite & Alloys * Uniform Detection from top to bottom Yes * Capable of Metal Detection in all orientations Yes * Detect multiple objects of various size, weight and shape in all the zones simultaneously from head to toe Yes * Capable of Metal Detection in walking speed of interception Yes * Performance independent of the speed of person passing through Yes * ALARM/INDICATION DISPLAY Audio-Visual indication on detection at side panels and control panel Yes * 2/6 Audible Alarm on detection with adjustable volume Yes * Bar Display to indicate Metal location w r t Height on person Yes * Audio-Visual Low Battery indication Yes * Back-lit Display LCD * SENSITIVITY Operational Frequencies User selectable * Number of User Selectable frequencies 10 * Adjustable Sensitivity Yes * Number of Sensitivity Levels/Steps 10 * Uniform Sensitivity in all zones Yes * Calibration Both manual and Auto Calibration * SECURITY Provision to secure access to the control unit by a pass word protected alpha numeric keypad Yes * Re-setting after alarm condition Re-set itself (auto) within 3 Seconds * Walk/Stop indicator for traffic control Yes * Control Panel Easy accessible control panel, with modular design and standard plugs and connectors. Adjustable controls should only be activated on insertion of a removable key and or by password. * User friendly self- testing diagnostics to identify faulty condition Yes * INTERFERENCE SUPPRESSION REJECTION Automatic synchronization for DFMDs Do not interfere with adjacent installed DFMDs located close to each other upto a distance of 1 * 3/6 Static Metal Compensation Not affected by heavily reinforced floors/roof tops/walls Yes * High discrimination between small masses and personal metallic objects Yes * Not affected by external RF transmission and EMI (Electro Magnetic Interference) Yes * Not affected by by interference, which is mains-borne or radiated by external source Yes * Not affected by the operation of radio, Mobile phones, walkie- talkie sets, X-ray monitors etc within a distance of one meter Yes * Not affected by moving metallic items such as trolleys, opening closing of metallic gate etc, one meter away from the archway Yes * HEALTH & SAFETY Harmless to wearers of pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media Yes * Not affected by infrared, ultraviolet, electromagnetic or RF radiation Yes * Conform to international security standards of Safety Radiation Yes * Harmless to magnetic media, electronic devices, Film safe and Data safe Yes * ENVIRONMENTAL Operating Temperature Range (Degree C) Minus 20 to Plus 55 Degree C * 4/6 Operating Humidity - Non condensing (RH) (%) 95 * POWER SUPPLY BATTERY Source of Power Operated by AC mains supply and alternatively by rechargeable battery * Power Supply 220 V +/-10% VAC * Battery Re-chargeable, maintenance free, internal battery with charger * Battery Back-up in full function (hours) 12 * ACCESSORIES One Standard Test Piecec for each machine for testing during commissioning maintenance Inclusive in the scope of supply * Training tools- Charts, slides, training brochure, training work model, blowup diagram, video films on demonstration and use etc Inclusive in the scope of supply * Technical manual giving full description of the item, user's handbook and literature Yes * Practical training 1 Day * Availability of Spares for a period of 7 years after the warranty period true * Ruggedized polypropylene shock proof container compliant to IP 65 or better for safe transportation of the equipment false * WARRANTY Warranty (Years) 3 * CERTIFICATION Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification true * 5/6 Test Report Number & Date - * Name & address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 David Gangte 248008, Ordnance Factory Dehradun Post Office - Raipur 2 60
Index card files Index Card Files ( 5000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type Type of File cover Pulp Board * Type of Binding Cloth binding * Dimension Dimensions of Paper (B X L) (mm) 210x297 mm 210x297 mm, 215x330 mm Dimensions of Index File ( L X B X H ) (mm) 285x315x75 mm 285x315x75 mm Grade and Grammage (GSM) Grade Confirming Indian Standards IS 4664:latest Grade S Grade G, Grade S Grammage of Pulp Board (gm/m2) 200 175-250 Thickness Thickness of Pack of Sheets inside (mm) 65 55-75 Thickness of Cover Board (micron) 300 300-500 Physical Characteristics Colour of cover BLUE * Burst Index (KPa m2/g) 1 * Inside clip/Paper Stainless steel Stainless steel, chrome 1/2 Holder plated * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 5000 15
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Canon * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number CRG 925 * Corresponding Part number/code 3484B004AA * Printer Model number/numbers for which Cartridge is suitable MF3010, LBP6030w, LBP 6030b, LBP6018b * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1600 * 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ajay Dahiya 110011, Dy Director General Coord Ordnance factory Board New Delhi Office G Block DHQ Opp Air HQ Delhi 110011 25 15
power cable for direct burial xlpe ugac cable Power Cable For Direct Burial Xlpe Ugac Cable ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Buying Through bidding only * Size of Cable (in Sq.mm) 95.0 95.0 Number of cores (nos) 3.5 3.5 Cable Type PVC outer Sheathed FR of Type ST-2 cable FR Grade C1 Category having heat resisting insulation of PVC compound type C with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 1554 Part-1 1988 reaffirmed 2005 PVC outer Sheathed FR of Type ST-2 cable FR Grade C1 Category having heat resisting insulation of PVC compound type C with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 1554 Part-1 1988 reaffirmed 2005 BIS marked yes * BIS certificate number 7060659 * Armouring Galvanised steel Strip armoured Galvanised steel Strip armoured 1/3 Armouring Type single wire or strip armouring single wire or strip armouring, Double wire or strip armouring shape of conductor Stranded and Shaped Stranded and Shaped CONSTRUCTIONAL Number of armouring strip/wire for each size of cable 17 (+/- 2) * size of armouring strip/wire for each size of cable 4 mm x 0.80 mm (+/- 10%) * Material of conductor Aluminium EC Grade * Weight of finished cable per meter 1.75 KG. Approx * In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable and Drum Number shall be embossed on every metre of the cable yes * standard cable length on a drum 500 meter for cable size up to and including 185 sqmm. * Part length which can be supplied by seller (meter) 100 * cable to be supplied on wooden drums conforming to IS: 10418/82 with latest amendments. yes * Quantity supplied shall not be more than the ordered quantity. yes * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings. yes * Type Test Certificate No. scpl/65 * Type Test Certificate date 11/07/2014 * 2/3 Name of Lab SCPL * Address of Lab Plot No. 2, Nr. Ramdev Export, Santej Vadsar road, santej, gujarat * Test Report to be furnished to the buyer on demand yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Singh Khati 242001, ORDNANCE CLOTHING FACTORY MINISTRY OF DEFENCE SHAHJAHANPUR 500 30
power cable for direct burial xlpe ugac cable Power Cable For Direct Burial Xlpe Ugac Cable ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Buying Through bidding only * Size of Cable (in Sq.mm) 70.0 70.0 Number of cores (nos) 3.5 3.5 Cable Type PVC outer Sheathed FR of Type ST-2 cable FR Grade C1 Category having heat resisting insulation of PVC compound type C with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 1554 Part-1 1988 reaffirmed 2005 PVC outer Sheathed FR of Type ST-2 cable FR Grade C1 Category having heat resisting insulation of PVC compound type C with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 1554 Part-1 1988 reaffirmed 2005 BIS marked yes * BIS certificate number CM/L 8163270 * Armouring Galvanised steel Strip armoured Galvanised steel Strip armoured 1/3 Armouring Type single wire or strip armouring single wire or strip armouring, Double wire or strip armouring shape of conductor Stranded and Shaped Stranded and Shaped CONSTRUCTIONAL Number of armouring strip/wire for each size of cable 16 +/- 2 * size of armouring strip/wire for each size of cable 4.00 X 0.8 +/-10% * Material of conductor Aluminium EC Grade * Weight of finished cable per meter 1.370 * In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable and Drum Number shall be embossed on every metre of the cable yes * standard cable length on a drum 500 meter for cable size up to and including 185 sqmm. * Part length which can be supplied by seller (meter) 250 * cable to be supplied on wooden drums conforming to IS: 10418/82 with latest amendments. yes * Quantity supplied shall not be more than the ordered quantity. yes * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings. yes * Type Test Certificate No. ATCC2013092406 AND ATC2013092407 * Type Test Certificate date 25/09/2013 * 2/3 Name of Lab Amit Test and Calibration Centre * Address of Lab 19/168, Sarai Rohilla, Old Rohtak Road, Near Shastri Nagar Metro & Usha Mata Mandir, Delhi - 110035 * Test Report to be furnished to the buyer on demand yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Singh Khati 242001, ORDNANCE CLOTHING FACTORY MINISTRY OF DEFENCE SHAHJAHANPUR 500 30
chairs-office
Modular Table
Lead Acid Battery ( 24 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries 1/3 for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Polypropylene Rated Capacity at C20 discharge (AH) 65 65, 65.0 Warranty (Years) 1 Year 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 65.00 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab Kirti Nagar, New Delhi * Name of the Lab Exide Research and development, New Delhi * Test Report No. ERD-18-A114 * Test Report Date 12.02.2018 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for YES * 2/3 Portable sealed secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 24 30
lead acid battery, lead acid battery Lead Acid Battery ( 80 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries 1/5 for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Polypropylene Rated Capacity at C20 discharge (AH) 26 26 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 12 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab CPRI * Name of the Lab CENTRAL POWER RESERCH INSTITUTE * Test Report No. 300 * Test Report Date 11-9-2014 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed YES * 2/5 secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 80 30 Lead Acid Battery ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, Lead- Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to 3/5 IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Polypropylene Rated Capacity at C20 discharge (AH) 7 7 Warranty (Years) 1 Year 1 Year, 5 Years Battery Condition Dry Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 480 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab Kirti Nagar, New Delhi * Name of the Lab Exide Research and Development, New delhi * Test Report No. ERD105 * Test Report Date 11.12.2018 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications Yes * * Bold specifications are the golden parameters. Consignees and Quantity 4/5 S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Phool Bagh 300 30