Loading
Loading…
Loading…
2,900 results • Latest
gate valve Gate Valve ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SIZE/TYPE DIMENSIONAL MATERIAL Classification Class 1 Valves Class 1 Valves Nominal Size of Valve 50 50.0 Type of Gate Valve Solid Wedge Solid Wedge, Split Wedge, Double Disk Type of Valves End Screwed End Valve Screwed End Valve, Flanged Valve Type of Bonnet Screwed-in Bonnet Screwed-in Bonnet, Screwed-on Bonnet, Bonnet Flanges, Bonnet Bolting Material of Bonnet or Cover Leaded Tin Bronze Leaded Tin Bronze, Forged Brass, Brass Material of Body Brass Brass, Leaded Tin Bronze Material of Stem, Hinge Pin and Plug Extruded Brass Rod * Word 'OPEN' or 'SHUT' with arrow to indicate Direction On Handwheel * 1/2 Weight 2.5 * CONFORMITY CERTIFICATION Conformity to Indian Standard IS 778 : latest * ISI Marking true true Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 300 30
gate valve Gate Valve ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SIZE/TYPE DIMENSIONAL MATERIAL Classification Class 1 Valves Class 1 Valves, Class 2 Valves Nominal Size of Valve 40 40.0, 50.0 Type of Gate Valve Solid Wedge Solid Wedge Type of Valves End Screwed End Valve Screwed End Valve Type of Bonnet Screwed-in Bonnet Screwed-in Bonnet Material of Bonnet or Cover Forged Brass Forged Brass Material of Body Leaded Tin Bronze Brass, Leaded Tin Bronze Material of Stem, Hinge Pin and Plug High-Tensile Brass * Word 'OPEN' or 'SHUT' with arrow to indicate Direction On Plate Secured Below the Handwheel Nut * Weight 0.9 * CONFORMITY CERTIFICATION Conformity to Indian Standard IS 778 : latest * 1/2 ISI Marking true true Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 300 30
classroom chairs Classroom Chairs ( 40 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Chair Type Foldable Writing pad on One side and Arm on other side Foldable Writing pad on One side and Arm on other side Type of Seat and Backrest Made of Wood * Depth of Seat in mm (+/- 10 mm) 440 * Height of Seat in mm (+/- 10 mm) 460 * Width of Seat in mm (+/- 10 mm) 480 * Overall Chair Height in mm (+/- 10 mm) 800 * SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) 40 * Density of Cushion Used in Seat (Kg/Cubic Metre) 40 * Material of Fabric of 290 GSM cloth fabric * 1/3 Seat Cover BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) 40 * Thickness of Cushion in Backrest in mm (+/- 2 mm) 40 * Material of Fabric of Backrest Cover 290 gSM Cloth Fabric * Width of Backrest (mm) 480 * Height of Backrest (mm) 400 * SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum * Under Storage provided below the Seat NO * Material of under storage NA * Length of Under Storage (mm) NA * Width of Under Storage (mm) NA * DEPTH of Under Storage (mm) NA * WRITING PAD DETAILS Writing Pad Material 18 mm thick prelaminated Particle Board * Writing Pad Size (Length X Width in mm) 350mm x 240mm (Half Writing tablet in BSL with edge banding) * MISC Colour of Fabric for Seat and Backrest As per buyer's choice * Finishing of Structure Powder coated * WARRANTY Warranty period in number of years 1 1 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO YES YES, NO 2/3 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 40 60
smart card printer Smart Card Printer ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Printing Type Re-Transfer (Dye Sublimation/Resin Thermal Transfer) Re-Transfer (Dye Sublimation/Resin Thermal Transfer), Direct to Card (DTC) Print colour Full colour Monochrome, Full colour Print Capability Dual Sided Printing (Auto) Single Sided Printing, Dual Sided Printing (Auto) Print Resolution (dpi) 600 299-99999 Edge to Edge Print Speed (Single side) - Monochrome (cards per hour) 0 Any applicable numeric value Edge to edge Print Speed (Single side) - Full colour (cards per hour) 100 Any applicable numeric value Edge to Edge Print Speed (Dual side) - 0 Any applicable numeric value 1/4 Monochrome (cards per hour) Edge to edge Print Speed (Dual side) - Full colour (cards per hour) 66 Any applicable numeric value Automatic Card feeding Yes * Compatible Card material (eg PVC, PET, Composite, Adhesive backed etc) yes * Compatible Card Size (eg CR 80, CR 79, ISO 7810 format ID-1, ID-2 etc) yes * Compatible Card Thickness (minimum to Maximum) 20, 40 * Card Input Hopper capacity 125 * Card Output hopper capacity (Nos) 25 * Communication interface capabilities USB + Ethernet * OS Compatibility windows * Buffer Memory (RAM) (MB) 16 * Magnetic Stripe encoding option available No * Details of Magnetic encoder ( May specify "N/A" for printer without magnetic Stripe encoder) NA * Contact Smart Card encoding option available No * Details of Contact type Smart Card encoder (eg ISO 7816, EMV, K- cash, etc) NA * Contactless type Smart Card (internal & external) encoding option available No * Details of Contactless type Smart Card (internal & external) NA * 2/4 encoder (eg ISO 14443, ISO 15693, Mifare, Desfire, iClass, etc) RFID encoding option available No * Details of RFID encoder (eg ISO 18000, etc) na * Housing Material Reinforced Plastic * One Card cleaning Kit provided with main equipment Yes * One Pack of 100 blank cards provided with main equipment Yes * Type of Ribbon Cartridge Full Colour (YMCKO) * Yield of the Ribbon (Monochrome & Full Colour, as applicable) 10000 * Overall Dimensions (LxWxH) (mm x mm x mm) L21.4-W10.1-H15.6 ( mm x mm x mm) * Net Weight (Kg) 12.7 * Power supply 230 +/-10%, 50 Hz AC * Maximum Power consumption (Watt) 230 * Operating Temperature (degree C) 38 * Operating Humidity (%RH) 45 c * Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specifications Yes * If yes, Test Report Number - * If yes, Test Report Date - * If yes, Name of Test Lab - * If yes, Address of the Test Lab - * Free installation and demonstration Yes * ON Site OEM Warranty (Years) 1 1, 2, 3 3/4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Padmakar Rustum 421502, MACHINE TOOL PROTOTYPE FACTORY ORDNANCE ESTATE, AMBARNATH 1 15
Televisions
water storage tanks Water Storage Tanks ( 400 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes * ISI Marked true true CM/L No 5177468 * Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank Number of Layers Single Layer Single Layer Capacity Capacity of the Tank (Litres) 700 700 Dimension Dimenstion of Tank as per IS 12701(latest) Yes * Uses Uses Out Door Use Out Door Use, In Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Yes * 1/2 Declared Parameters as per IS Specification Test Report No 681 * Test Report Date 09082018 * Name of the Lab Hindustaan Test House * Address of the Lab Ambala * Test Reports to be furnished to the buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 400 30
Printer
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 250 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP * 1/3 LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 201206, ORDNANCE FACTORY MURADNAGAR DISTT. GHAZIABAD 250 25
Human Resource Outsourcing Service
binding punch machine Binding Punch Machine ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type and Size Type of Punching Manual Manual Type of Binder Spiral Spiral Size of Paper A3 A3 Punching Details Number of Punch(min.) (Nos.) 48 * Punching speed for electrically operated machine (Sheets/Hour) NA * Punching Capacity (Min. on 70 GSM Sheet) (Nos.) 12 8, 12, 15, 20, 25, 30, 35 Physical Characteristics Overload Protection Yes * Material of Punching Blades High Carbon steel * Chip Tray Yes * Alignment scale Yes * Binding margin control facility Yes * 1/3 Gravity feed table Yes * Material of self sharpening Punches Tool steel duly harden/tempered * Body of Binder Al die cast Al die cast Letherette Pulp Board With Grains (GSM) 349 250-349 Safety Requirement IS:302 (pt-I) latest * ISI marked, 3 Metres connecting cable with 3-pin moulded Plug Top 6amps Yes * Thickness of Sheets Binding Thickness (mm) 50 50 Polyester Transparent sheet (thickness) (microns) 250 125, 175, 250 PVC Rigid sheets Thickness (microns) 280 250-280 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Premjit Singh Sahota 208004, DS Cell, Kanpur DGQA Complex, Napier Road, Kanpur Cantt 1 15
Light Emitting Diode LED Fixture- LED tube light Experience with Gov. Required 3 Year (s) Light Emitting Diode LED Fixture- LED Tube Light ( 2476 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 20 Watt/2000 lumen, 18 Watt/1800 lumen Colour Temperature (K) 6500 6500 Warranty for free replacement (Years) 3 years 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without * Light Source SMD LED Chip * LED Make SAMSUNG, NICHIA, LUMI LEID, OSRAM * 1/3 Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0, 25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration - * 2/3 certificate under (CRS) number and date Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report - * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravindra Sukdeo Medhe 425203, ORDNANCE FACTORY BHUSAWAL 2476 15
diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 30 30.0, 30 (or higher) No of Phase - Three Phase ENGINE Make of Engine - * Model Number of Engine - * Capacity of Engine (cc) - * Engine Power (kWm) - * ISI Marking to IS :10001 for engine false * BIS license No, if applicable - * Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Electronic Electronic (or higher) Class of governer A1 A0, A1, A2 (or higher) 1/4 Number of cylinders (nos) 3 * No of Strokes (nos) 4 * Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 * Specific Fuel Consumption (gm/kWh) - * Starting voltage (volt) 12 * ALTERNATOR AC GENERATOR(ALTER NATOR) Make - * AC GENERATOR(ALTER NATOR) model Number - * Rating of AC Generator (KVA) 30 * Power Factor of AC generator 0.8 * Efficiency at rated Power factor at 75% of full Load 91.5 * Compliance of Alternator to IS:13364(part-1) Yes * Type of alternator Brushless * Voltage Regulation Grade VG 1 * Alternator IP Rating IP 23 * Class of Insulation H * CONTROL PANEL Control Panel AMF AMF IP Rating of Control Panel IP 53 * ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 (or higher) Thickness of Foam 25 * Density of Foam for sound insulation 26 * Noise level at 1 meter (dB) 75 * BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles * Battery capacity (Ah) - * 2/4 No of batteries 1 * TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes * Test Report number and date(Engine) - * Name and address of laboratory(Engine) - * Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes * Test Report number and date(Alternator) - * Name and address of laboratory(Alternator) - * DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes * WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Any applicable numeric value Installation & Commissioning With Installation With Installation Agreed to STC of the Product Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagendra Pratap Singh N 412101, ORDNANCE FACTORY DEHU ROAD 1 45
Compatible Cartridge
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CE278AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & 2100 * 1/2 ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 201206, ORDNANCE FACTORY MURADNAGAR DISTT. GHAZIABAD 50 25
lead acid battery Lead Acid Battery ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries 1/3 for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 100 1-300 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 7800 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab MINISTRY OF COMMUNICATION & IT, GOVT OF INDIA, DR.VSI ESTATE, T HIRUVANMIYUR, CHENN AI-600041 * Name of the Lab ELECTRONICS TEST AND DEVELOPMENT CENTRE * Test Report No. ETDC(CN)/2O13/46688 * Test Report Date 25/08/2014 * Compulsory NA * 2/3 Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 20 30
Desktop Computers
Domestic Water Heater-geyser
electronic digital postal franking machine Electronic Digital Postal Franking Machine ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values PERFORMANCE DETAILS Type of printing Inkjet * Duty Cycle Upper High Ended Low Ended, Upper Low Ended, Mid Ended, Upper Mid Ended, High Ended, Mid High Ended, Upper High Ended Minimum Franking speed (Articles/Hour) 1200 1200, 10500, 2500, 4500, 7500 Feeding Option Auto Auto Weighing Capacity 2.5 10.0, 2.5, 35.0, 5.0, 7.0 Facility for creating user accounts true true, false Number of user accounts 5 * Maximum Franking value(Rs) 9999.99 * Size of slogan die 22 * 1/3 Tape roll/label capacity 50 * Maximum envelope size (mmxmm) 381x330 mm x mm * Article thickness holding capcity 9.25 * Noise level at 1 Meter distance 55 * Number of digits in Ascending register 12 * Number of digits in Descending register 10 * Over all dimension (HxWxD) (mmxmmxmm) 34.5x40x25.7 cm x cm x cm * Power Supply 230 +/- 10% Volts, AC 50 Hz * GENERIC Fully automatic with integrated Real time clock (RTC) Yes * Integrated modem for the remote server connection for re- crediting Yes * Facility of electronic password and crediting password Yes * Ink Alert Yes * Provision of programmabel and user selectable slogan dies Yes * Other Features ---- * APPROVAL AND WARRANTY Approval by Department of Post Yes Yes Approval Letter no and date NA * Warranty 1 1.0 ENVIRONMENTAL CERTIFICATION Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 Yes * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 Yes * 2/3 Conformity to Cold test at -10 degree C for four hours as per IS: 9000 Yes * Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Saumya Ranjan 763002, HINDUSTAN AERONAUTICS LIMITED ENGINE DIVISION-KORAPUT SUNABEDA 1 30
automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 9 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Without Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian Standrad for NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: 1/4 Pneumatic Tubes Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres - * ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - * Type of tube NA for Tubeless and without tube * Manufactures name and Trade Name - * Tyre-size Designations 1200x20 * Tube-size Designations NA for Tube less and without Tube * Structure of Tyre Reinforced or Extra Load Diagonal or bias ply, Bias-belted, Radial, Reinforced or Extra Load Ply Rating 18 * Speed Category - * Load indicas - * Side Well (mm) 325 * Inner area of Tyers (mm) 22.5 * Section Width (min)(mm) 312 * Overall Width (max)(mm) 12 * Section Height (mm) 20 * Nominal Aspect Ratio(mm) 20 * Outer diameter (min)(mm) 1135 Any applicable numeric value Nominal Rim Diameter(mm) 8.5 Any applicable numeric value Maximum load Rating(%) 3700 Any applicable numeric value Conformity to AIS-044 Yes * Availability of Type Test Report covering complete test YES * 2/4 parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. Test cetificate No. - * Test Report Date - * Name and address of the Lab where test Conducted - * Others Certificate ie ROHS, WHO, GMP etc - * Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramjit Prasad 461114, CENTRAL PROOF ESTABLISHMENT ITARSI (MP) NH-69 9 15
revolving chair Revolving Chair ( 83 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/5 Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 550 * Backrest Width ±10mm 480 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 520 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO YES YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 83 30
Electronic Weighing Scales
roti maker domestic bread making machines Roti Maker Domestic Bread Making Machines ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Machine Type Machine Type Rotary Wheel mechanism * Chapati Collect Chapati collection Automatic collection to storage Bin * Design Start/Response Time for first Chapati comming to Bin(min) 1 * Dough Ball weight Range (25 to 45 gms) minimum yes yes Structural/Covering material of the machine Stainless Steel * Power consumption (watt) 750 750 Shape of Chapati Round * Chapati Colour Light brown * Power efficient machine yes * 1/3 Chapati diameter (mm) 175 175 Automation Automatic, with Dough Ball making Process Automatic, with Dough Ball making Process, Semi automatic, without Dough Ball making Process Quality of Chapati Soft with Puffed layer * Fuel efficient Machine yes * Details Of Display On Control Panel Temparature Controller true * Volt Meter true * Toggle Switch true * Push Starter true * Rotary Switch true * Emergency Switch And Indicators true * Dimension Input Voltage (volt) 230 +/- 10% 230 +/- 10% Chapati making Capacity (nos/hour) 900 * Fuel Consumption(LPG) (kg/Hr) 1.5 * Over all length ( in MM ) 800 * Over all width ( in MM ) 800 * Over all height ( in MM ) 1500 * Input Power (phase) Single Single, Three Fuel Type of fuel LPG * Test Report Certification NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 1 30
power cable for direct burial xlpe ugac cable Power Cable For Direct Burial Xlpe Ugac Cable ( 1000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Buying Through bidding only * Size of Cable (in Sq.mm) 400.0 * Number of cores (nos) 3.5 1, 2, 3.5, 4 Cable Type Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005, PVC outer Sheathed FR of Type ST-2 cable FR Grade C1 Category having heat resisting insulation of PVC compound type C with 1/4 aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 1554 Part-1 1988 reaffirmed 2005 BIS marked yes * BIS certificate number 8378392 * Armouring Galvanised steel Strip armoured Galvanised round steel wire armoured, Galvanised steel Strip armoured, unarmoured Armouring Type single wire or strip armouring single wire or strip armouring, Double wire or strip armouring shape of conductor Stranded Solid, Stranded, Stranded and Shaped CONSTRUCTIONAL Number of armouring strip/wire for each size of cable 4.0 =/= 10% * size of armouring strip/wire for each size of cable 0.80 =/- 10 % * Material of conductor Aluminium EC Grade * Weight of finished cable per meter NA * In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable and Drum Number shall be embossed on every metre of the cable yes * standard cable length on a drum 250 meter for size 240sqmm and above. * Part length which can be supplied by seller (meter) NA * cable to be supplied on wooden drums conforming to IS: 10418/82 with latest amendments. yes * Quantity supplied shall not be more than the ordered quantity. yes * 2/4 CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings. yes * Type Test Certificate No. ATCC/17092305 * Type Test Certificate date 12.10. 2017 * Name of Lab Amit Test and Calibration Center * Address of Lab 19/168, Sarai Rohilla, Old Rohtak Road, Near Usha Mata Mandir, New Delhi * Test Report to be furnished to the buyer on demand yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 1000 30
laundry soap Laundry Soap ( 25581 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 285:Latest Yes * ISI Marking No Yes, No CML Number NA * Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number A1803318 * Test Report Date 02.04.2018 * Name of the Lab ATHARVA LABORATRIES PVT. LTD * Address of the Lab B-100, PHASE-11, NOIDA -201305(U.P), NOIDA * Type and Fragrance Type Type 1 (Pure Soaps) Type 1 (Pure Soaps), Type 2 (Built Soaps) Grade 1, Type 2 (Built 1/2 Soaps) Grade 2 Fragrance MULTI * Weight and Packing Weight of Bar/Cake (gms) 250 80, 100, 125, 150, 200, 250 Number of Bars in a Pack (Nos) 1 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 25581 30
built up trucks Built Up Trucks ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5675 * Model No TATA SK1613 4X2, 6.5Cum BSIV Tipper Any applicable text(s) Pay Load Capacity (Tonne Load) 9.219 Any applicable numeric value Type of chassis for Vehicle Semi Forward control * Chassis with Built up Cabin true true, false Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle Riveria Blue, White, Others * Engine BHP@rpm (hp@rpm) 133 BHP at 2400 rpm hp@rpm Any applicable text(s) Engine Torque Max@rpm (Engine 490 Nm at 1400-1800 rpm Engine Torque Any applicable text(s) 1/4 Torque Max@rpm) Max@rpm Top Speed (Kmph) 60 * Braking Distance (m) 32.8 * Gradeability of Vehicle (%) 26 Any applicable text(s) Engine Aspiration System Turbocharged Intercooled Natural, Supercharged, TurboCharged, Turbocharged Intercooled Fuel Tank Capacity (Ltrs) 160 * Load Body Type Box Tipper loadbody * Trailer Type NA * Ground Clearance (mm) 239 Any applicable numeric value Floor Area (sq. mm) 6.73 * Wheel Base (mm) 3625 Any applicable numeric value Kerb Weight (Kg) 6845 Any applicable numeric value Gross Vehicle Weight (Kg) 16200 Any applicable numeric value Type of Vehicle Tyre Radial Tube, Tubeless, Radial, Bias Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear * No of Axle (Nos) 2 * Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 4X2 * Type of Front Axle and Suspension System Reverse Elliot type, I beam & Semi elliptical leaf spring * Type of Rear Axle and Suspension System Single reduction heavy duty & Semi elliptical leaf spring * No. of Speed/Forward Gears 6 * Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 7400 * Type of Clutch Single plate dry friction * Type of Front Brakes Full Air S-Cam * 2/4 Type of Rear Brakes Full Air S-Cam * Certification Vehicle Certification ARAI/VRDE/ICAT No AAIN 0143 Any applicable text(s) Constructional Parameters Type of Cabin Semi Forward control drivers cabin * Overall Length (mm) 6295 * Overall Width (mm) 2434 * Overall Height (Cabin) (mm) 2550 * Type and Location of Shock Absorbers Hydraulic Double Acting Telescopic Type (Front Only) * No of Front Tyre (Nos) 2 * No of Rear Tyre (Nos) 4 * Size Of BIS marked Front Tyre with Ply Rating 10.00 x 20 -16 PR * Size of BIS marked Rear Tyre with Ply Rating 10.00 x 20 -16 PR Any applicable text(s) Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 4.09 1.0E-6-9999999 Warranty Distance (Km)unlimited during warranty period 20000 Any applicable numeric value Warranty Time (Months) 12 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 18 * No of Free Service (Nos) 3 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar Singh 461122, NH-69 BETUL ROAD ORDNANCE FACTORY ESTATE ORDNANCE FACTORY ITARSI (MP) 2 90 3/4
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 92 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Gas Cartridge Type Extinguishing Media Powder Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium CO2 Extinguishing Medium CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA * Powder Based Extinguishing Media BC * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA 1/4 Powder Based Fire Extinguisher Capacity (Kg) 9 1, 2, NA Carbon Dioxide Based Fire Extinguisher Capacity (Kg) NA 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 13.2 Any applicable numeric value Rechargebale true * Color Coding Blue * Fire Extinguisher Suitable for Class -A Fire false * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire true * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire true * Performance Operating Temperature (° C) -10° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min 23 Any applicable text(s) 2/4 (Seconds) Fire Rating for Class -A Fire Extinguisher 4A * Fire Rating for Class -B Fire Extinguisher 34B * Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 92 90
LED Luminaire (for Flood Light) LED Luminaire (for Flood Light) ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 120W 120W, 125W, 130W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP65 IP65 Mounting brackets (included) Adjustable * Warranty for free replacement (in Years) 5 * ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * Total Harmonics Distortion (in %age) ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥70 * Beam Angle ≥120 * Optic lense materal (UV stabilised) (Write NA for without optic lense supply) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * 2/7 Junction temperature * Operating temperature range -10 deg C to +55 deg C * Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients ( Internal) >/=4KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant epoxy powder coated Yes * All fastners must be of stainless steel Yes * The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes * Extruded silicon loop gasket shall be provided in the lantern body to ensure a Yes * 3/7 weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm * Light Source SMD LED Chip as per LM 80/IS16106 * MARKING "Manufactures Name and and brand on the aluminium die cast body Engraved/Embossed * Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot Yes * 4/7 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Yes * 5/7 Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report on demand by buyer/consignee Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 prashant surkar 442501, Ordnance Factory Chanda, bhadrawati Dist Chandrapur Pin 442501 Maharashtra 20 15
chairs-office
biometric identification equipment Biometric Identification Equipment ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Type Iris Authentication Device for use with Desktop, Laptop, Tablet, POS Device etc. Iris Authentication Device for use with Desktop, POS Device etc. Certification for Device and extractor software/SDK STQC Certified * API/SDK Windows 7 and above (including Windows based Mobile Phone) Windows 7 and above (including Windows based Mobile Phone), Android 4.0 and Above, Linux Integrated USB 2.0 and above Connector Yes * Connector Cable to connect the Device to Micro USB & Standard USB Yes * UIDAI Certified Registered Device (Copy of the certificate to be furnished when Yes * 1/3 demanded by buyer) Conformity to the "Terms and Conditions of UIDAI Certified Registered Device" Yes * Warranty (Years) 1 1, 2, 3, 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akhilesh Kumar 482005, Ordnance Factory Khamaria, Jabalpur 15 15
Multifunction Machines
Naphthalene Balls
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 208 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Gas Cartridge Type Extinguishing Media Water Based Water Based Expellant Medium CO2 Cartridge Based CO2 Cartridge Based Constructional Foam Based Extinguishing Media NA * Powder Based Extinguishing Media NA * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, NA Carbon Dioxide Based Fire NA 2, 3, 4.5, NA 1/3 Extinguisher Capacity (Kg) Water Based Fire Extinguisher Capacity 9 9 Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 14.5 14.5 Rechargebale true * Color Coding Red * Fire Extinguisher Suitable for Class -A Fire true * Fire Extinguisher Suitable for Class -B Fire false * Fire Extinguisher Suitable for Class -C Fire false * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire false * Performance Operating Temperature (° C) +5° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min (Seconds) 34 34 Fire Rating for Class -A Fire Extinguisher 3A * Fire Rating for Class -B NA * 2/3 Fire Extinguisher Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 208 60
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 174 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Gas Cartridge Type Extinguishing Media Foam Based Foam Based Expellant Medium CO2 Cartridge Based CO2 Cartridge Based Constructional Foam Based Extinguishing Media Aqueous Film Forming Foam (AFFF) * Powder Based Extinguishing Media NA * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) 9 9 Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, 4, 6, 9, NA Carbon Dioxide Based Fire NA 2, 3, 4.5, NA 1/3 Extinguisher Capacity (Kg) Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 14.35 14.35 Rechargebale true * Color Coding Yellow * Fire Extinguisher Suitable for Class -A Fire true * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire false * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire false * Performance Operating Temperature (° C) +5° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min (Seconds) 25 25 Fire Rating for Class -A Fire Extinguisher 4A * Fire Rating for Class -B 34B * 2/3 Fire Extinguisher Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 174 60
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 49 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Gas Cartridge Type Extinguishing Media Powder Based Powder Based Expellant Medium CO2 Cartridge Based CO2 Cartridge Based Constructional Foam Based Extinguishing Media NA * Powder Based Extinguishing Media BC * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) 6 6 Carbon Dioxide Based Fire NA 2, 3, 4.5, NA 1/3 Extinguisher Capacity (Kg) Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 10.8 Any applicable numeric value Rechargebale true * Color Coding Blue * Fire Extinguisher Suitable for Class -A Fire true * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire true * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire true * Performance Operating Temperature (° C) -10° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min (Seconds) 13 13 Fire Rating for Class -A Fire Extinguisher 3A * Fire Rating for Class -B 34B * 2/3 Fire Extinguisher Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 49 60
Filtering Half Mask-Air Pollution Mask
sand goggles Sand Goggles ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conforming to standard As per BSF Specifications As per BSF Specifications Link to the BSF specification https:/dgserver.dgsnd. gov.in/rc/46181804.pdf * Read the Specification and fully understood YES * CONSTRUCTIONAL Material of Goggle(as per BSF specification) Polycarbonate and Plastic material chemical splash * PERFORMANCE Compliance to Specification YES * Sand Goggle is suitable in hot desert climate in desert area YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N Nanda Kumar 560017, HAL Helicopter 100 15 1/2 Division, Vimanapura Post Office
Stacker
LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 8 Lakh (s) Experience with Gov. Required 1 Year (s) LED Luminaire (For Road And Street Lights) ( 75 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System 36W 36W 1/7 Wattage/Rated Power Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * Warranty for free replacement (in years) 2 2 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * 2/7 Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED IP66 * 3/7 section and driver section) as per IS:10322 (Part 1):1982 latest Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name Engraved/Embossed * 4/7 and and brand on the aluminium die cast body " Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * 5/7 LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 David Gangte 248008, Ordnance Factory Dehradun Post Office - Raipur 75 45 6/7
Domestic Water Heater-geyser
phenyl
Printer
Digital Storage Oscilloscope
toilet cleaners powder Toilet Cleaners Powder ( 3600 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 13760:Latest Yes * ISI Marked false true, false BIS Licence Number 1484154 * Test Report Details Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification YES YES, NO Test Report Number 054 * Test Report Date 10.2.2018 * Name of the Lab SHIVA CHAMICAL * Address of the Lab JABALPUR * Packing Packing Size (gram) 1000 1000 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ARUN KUMAR 743144, General Manager Rifle Factory Ishapore Ghoshpara Road, Nawabganj, Ichhapur 3600 90
built up trucks Built Up Trucks ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 793 * Model No MARUTI SUPER CARRY DIESEL STANDARD Any applicable text(s) Pay Load Capacity (Tonne Load) 0.74 Any applicable numeric value Type of chassis for Vehicle Ladder Type Frame with inverted hat Section Long Members * Chassis with Built up Cabin true true, false Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle Non Metallic Superior White And Metallic Silky Silver * Engine BHP@rpm (hp@rpm) 32.18@3500 Any applicable text(s) 1/4 Engine Torque Max@rpm (Engine Torque Max@rpm) 75@2000 Any applicable text(s) Top Speed (Kmph) 80 * Braking Distance (m) 37 * Gradeability of Vehicle (%) 34% Any applicable text(s) Engine Aspiration System TurboCharged Natural, Supercharged, TurboCharged, Turbocharged Intercooled Fuel Tank Capacity (Ltrs) 30 * Load Body Type Fully Company-Built Pick Up Type Load Body with Hinged Tail Gate * Trailer Type Not Applicable * Ground Clearance (mm) 175 Any applicable numeric value Floor Area (sq. mm) 3250000 * Wheel Base (mm) 2110 Any applicable numeric value Kerb Weight (Kg) 860 Any applicable numeric value Gross Vehicle Weight (Kg) 1600 Any applicable numeric value Type of Vehicle Tyre Tubeless Tube, Tubeless, Radial, Bias Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear * No of Axle (Nos) 2 * Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 4X2 * Type of Front Axle and Suspension System Mac Pherson Strut with Coil spring * Type of Rear Axle and Suspension System Rigid Driven Axle With Leaf Spring * No. of Speed/Forward Gears 5 * Type of Steering Manual Manual, Power Operated Turning Radius (mm) 4300 * 2/4 Type of Clutch Dry, Single Plate * Type of Front Brakes Front Disc. Dual Circuit Hydraulic Brake acting on all Wheels * Type of Rear Brakes Rear Drum. Dual Circuit Hydraulic Brake acting on all Wheels * Certification Vehicle Certification ARAI/VRDE/ICAT No CAKN0028 F02 dated 9 Feb 2018 Any applicable text(s) Constructional Parameters Type of Cabin Fully Company-Built Full Forward Control Steel Cabin * Overall Length (mm) 3800 * Overall Width (mm) 1562 * Overall Height (Cabin) (mm) 1883 * Type and Location of Shock Absorbers 2 no.s Telescopic shock absorber at Rear * No of Front Tyre (Nos) 2 * No of Rear Tyre (Nos) 2 * Size Of BIS marked Front Tyre with Ply Rating 155R13 LT8PR * Size of BIS marked Rear Tyre with Ply Rating 155 R 13 LT8PR Any applicable text(s) Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 22.07 1.0E-6-9999999 Warranty Distance (Km)unlimited during warranty period 72000 Any applicable numeric value Warranty Time (Months) 24 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 15 * No of Free Service (Nos) 4 * * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 1 60
built up trucks Built Up Trucks ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 1478 * Model No DOST RFS Cabin & Chassis fitted with BS IV Diesel Engine with Manual Steering and having PTO provision, Cabin Colour - White Any applicable text(s) Pay Load Capacity (Tonne Load) 1.492 Any applicable numeric value Type of chassis for Vehicle Cabin & Chassis * Chassis with Built up Cabin true true, false Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle White * Engine BHP@rpm 58hp@3300rpm Any applicable text(s) 1/4 (hp@rpm) Engine Torque Max@rpm (Engine Torque Max@rpm) 157.5 Nm@ 1600-2400 RPM Any applicable text(s) Top Speed (Kmph) 80 * Braking Distance (m) 43.1 * Gradeability of Vehicle (%) 24 Any applicable text(s) Engine Aspiration System TurboCharged Natural, Supercharged, TurboCharged, Turbocharged Intercooled Fuel Tank Capacity (Ltrs) 60 * Load Body Type Cabin & Chassis * Trailer Type Cabin & Chassis * Ground Clearance (mm) 177 Any applicable numeric value Floor Area (sq. mm) 3780000 * Wheel Base (mm) 2350 Any applicable numeric value Kerb Weight (Kg) 1053 Any applicable numeric value Gross Vehicle Weight (Kg) 2545 Any applicable numeric value Type of Vehicle Tyre Radial Tube, Tubeless, Radial, Bias Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear * No of Axle (Nos) 2 * Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 4 x 2 * Type of Front Axle and Suspension System Rigid Tubular Axle with Parabolic Leaf Spring * Type of Rear Axle and Suspension System Parabolic Leaf Spring, 2 Stages, Overslung * No. of Speed/Forward Gears 5 * Type of Steering Manual Manual, Power Operated Turning Radius (mm) 5.85 * Type of Clutch Dry/Single Plate Mechanical * 2/4 Type of Front Brakes Ventilated Disc type * Type of Rear Brakes Drum Type * Certification Vehicle Certification ARAI/VRDE/ICAT No AAJN0113 Any applicable text(s) Constructional Parameters Overall Width (mm) 1620 * Overall Height (Cabin) (mm) 1868 * Size of BIS marked Rear Tyre with Ply Rating 185 R 14 LT, 8PR Any applicable text(s) Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 17.37 1.0E-6-9999999 Warranty Distance (Km)unlimited during warranty period 50000 Any applicable numeric value Warranty Time (Months) 12 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 13.5 * No of Free Service (Nos) 4 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 1 60
Scanning and Digitisation Service
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 442 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP * 1/3 LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Konan Kumar Toppo 208004, Ordnance Parachute Factory Napier Road 442 15