Department of Defence Production and Supply Tender Results

Experience with Gov. Required 3 Year (s) Boot Ankle Leather Derby Direct Moulded Pu Midsole And Moulded Tpu Outsole ( 1072 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification URL of specification for Boot Ankle Leather Derby Direct Moulded PU Midsole & Moulded T.P.U. Outsole https:/dgserver.dgsnd. gov.in/rc/5311150002. pdf * Specification seen and understood Yes * Size Size (English Sizing System ) Assorted Size(5, 6, 7, 8, 9, 10, 11 & 12)As Per Buyer's Requirement 5, 11, 12, Assorted Size(5, 11 & 12)As Per Buyer's Requirement Colour Colour Any other colour as per buyers requirement * Material Boots are made from Chrome tanned barton print leather upper, lined with combination tanned lining leather. Yes * 1/3 Sole Direct Moulded P.U. Midsole and moulded T.P.U. Out Sole * Mass The mass of one pair of finished boots of size 8 shall not exceed 1200 gm with an increase or decrease of 75 g for each bigger or smaller size respectively Yes * Dimension The leg height (back height) shall be 115 mm ± 5 mm for size 8 with increase or decrease 5 mm per size. Yes * The depth of toecap shall be 60 ± 5 mm for size 8 with increase or decrease of 2 mm per size Yes * The thickness of outersole in the finished condition shall be as under:- 1. At forepart- 3.0 mm (min.); 2. At waist- 3.0 mm (min.); 3. At heel- 4.5 mm (min.) ; 4. Depth of cleat at sole & heel- 2.0 mm (min.); 5. Minimum thickness- 2.0 mm (min.) Yes * Test Report Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. true true, false Name of the Lab NSIC * Address of The Lab KANPUR * Test Report No. 54817 * Test Report Date 10/07/2017 * Test reports to be furnished to buyer on demand, if claimed to be available Yes * * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Tirthbasi Barik 700028, Ordnance Factory Dumdum, Jessore Road, Kolkata 1072 30

revolving chair Revolving Chair ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type push back * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest symmetrical lumber support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * 1/5 backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 3-Position Locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 1125 * Backrest Height ±15mm 600 * 3/5 Backrest Width ±10mm 550 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 520 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.4 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 2-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO 4/5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhadip Ghosh 500058, MISHRA DHATU NIGAM LIMITED PO: KANCHANBAGH 10 15

bathing soap Bathing Soap ( 2700 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes * BIS Marking false true, false CML Number NA * Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification No Yes, No Test Report Number NA * Test Report Date NA * Name of the Lab NA * Must declare (Write NA in case of NO against availability of Test Report) NA * Colour and Fragrance Colour as per photo * 1/2 Fragrance as per photo * Weight Weight of Soap (Gms) 100 100.0 Packing Packing Material plastic Any applicable text(s) Number of Soaps in a Pack (Nos) 1 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 2700 15

storage cum filing cabinet ( PAC Only ) Storage Cum Filing Cabinet ( 16 ) ( Under PAC ) Make godrejinterio Model godrejinterio Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Construction Almirah having two hinged doors on top and Drawers at the bottom Almirah having two hinged doors on top and Drawers at the bottom Number of Adjustable Shelves in top part of almirah (Nos) 1 0, 1, 2, 3, 4 No of File Storage Drawers at the bottom 1 1, 4 Sliding Mechanism for Drawers Ball bearing roller Ball slides, Ball bearing, Solid roller, Ball bearing roller, Telescopic Slide Type of Locking (Doors and Drawers) Central locking Central locking, Individual Locking, 1/5 Individual locking for each drawer and Almirah, One lock for Drawers and One lock for Almirah Delivery Condition of Sliding Door Storage Unit Knock Down supply to be assembled by Seller at Consignee Site Knock Down supply to be assembled by Seller at Consignee Site, Knock Down Supply to be assembled by consignee at site, Fixed Pre-Assembeled Unit MATERIAL Material M S Sheet M S Sheet, Laminated MDF Board with balancing lamination on the back side, Prelaminated Particle Board both side laminated, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Teak carved wood, Other wood Thickness of Top Pannel (mm) 20 ± 2 mm thickness of MDF/Particle board 0.6 mm thickness of MS sheet, 0.7 mm thickness of MS sheet, 0.8 mm thickness of MS sheet, 20 ± 2 mm thickness of MDF/Particle board, 19mm thick Commercial Block Board BWP grade, 19mm thick Decorative Block Board BWP grade, 19mm thick Commercial Block Board MR Grade, 19mm thick Decorative Block Board MR Grade Thickness of Bottom Pannel (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 20 ± 2 mm 2/5 thickness of MDF/Particle board, 19mm thick Decorative Block Board MR Grade Thickness of Back (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 20 ±2 mm thickness of MDF/Particle Board, 19mm thick Decorative Block Board MR Grade Thickness of side Pannels (mm) 0.8 mm thickness of MS sheet 0.6 mm thickness of MS sheet, 19mm thick Decorative Block Board MR Grade Thickness of Shelves Pannels (mm) 0.7 mm thickness of MS sheet 0.5 mm thickness of MS Sheet, 0.6 mm thickness of MS Sheet, 15 ±2 mm thickness of MDF/Particle Board, 3/5 19mm thick Decorative Block Board BWP grade, 19mm thick Decorative Block Board MR Grade Thickness of door Pannel (mm) 0.8 mm thickness of MS Sheet 0.6 mm thickness of MS sheet, 19mm thick Decorative Block Board MR Grade DIMENSION Overall Width ±5(mm) 900 * Overall Depth ±5(mm) 450 * Overall Height ±10(mm) 1830 1830, 2115 Working Width of Drawer ±50(mm) 0 * Working Height of Drawer ±3(mm) 0 * Working Depth of Drawer ±5(mm) 0 * COLOUR & FINISH Paint Powder Coating Powder Coating, Ennamel Paint, Mica Finish, Polish, Melamine Polish, Teak finish/polish Colour of MDF Prelaminated Particle Board As per buyer's choice * Colour of Paint gray * WARRANTY Warranty Period in number of years 1 1, 4, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Lalitha V Pillai 411003, CQA (Ammunition) Khadki, Pune 16 45

Vehicle Hiring Service (Short Term)

telephone instrument single push button Telephone Instrument Single Push Button ( 34 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Connecting Cord Length with each instrument (mtrs) 1 * Colour black/grey * Hands free two way speaker phone true true, false Mounting position Desk * Connecting Jack RJ 11 * Material High impact resistant polymer * Alpha Numeric Keyboard Yes * Weight (gms) 450 * Alarm facility true * DIALLING/RINGING FEATURES Mute true true, false No of Ring volume setting 1 * Redial facility true * 1/3 Caller ID true true, false No of selectable ring melody tone 10 * Flash true * Ringing LED indication true * Pause/Hold true * Tone/pulse switchable Yes * MEMORY No of Fast Dialing Keys 0 * No of Incoming call Memory 50 * No of outgoing call memory 50 * No.of Memory for redialing 9 * DISPLAY DETAILS Display With With, Without No.of digits in display 16 Any applicable numeric value CERTIFICATE Availability of the Test Report from TEC Yes * TEC approval Yes * TEC certificate No(not a part of biddable parameter) - * TEC certificate Date(not a part of biddable parameter) - * Validity of TEC cerficate(not a part of biddable parameter) - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 K Chandra Mohan 743144, PO - Ichhapur Nawabganj, North 24 Parganas 34 30

Wooden Bed Box Type Single or Double Wooden Bed Box Type Single Or Double ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Bed Double Bed Single Bed, Double Bed Material of Bed Frame teak wood teak wood, Carved teak wood, Other Wood, Flat single layer MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Headrest provided true * Legrest provided true * Opening of Storage Box WITHOUT STORAGE BOX * Number of Openings (Nos) 1 * Hydraulic System provided for false true, false 1/5 Opening Top Pannel have Supports from all the four sides YES * Leg Details Teak wood * Number of Supports under Bottom Pannel of storage box (Nos) 4 * MATERIAL Material of Matresses Pannel plywood conforming to is 303 plywood conforming to is 303, MDF board conforming to IS:12406(Grade SBG I), Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Other wood Material of Bottom Pannel of Storage Box plywood conforming to is 303 * Material of Front, Back and side Pannels Teak wood plywood conforming to is 303, Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest Teak wood * 2/5 Material of Legrest Teak wood * DIMENSIONS Matress Fixing Length ±10 (mm) 1905 * Matress Fixing Width ±10 (mm) 1830 915, 1525, 1830, 1980, 2134, 1200 Matress Pannel Height ±5 (mm) 125 * Depth of Storage Box in mm (±10 mm) NO STORAGE * Thickness of Matresses Pannel ± 1(mm) 19 * Thickness of Bottom Pannel of Storage Box ±1 (mm) 19 * Thickness of Front, Back and Side Panels ±2 (mm) 50 * Thickness of material of Headrest ±2 (mm) 38 18, 25, 36, 38, 50, 62, N.A Overall Height of Headrest ±5 (mm) 600 * Length of Headrest ±10 (mm) 1980 * Thickness of material of Legrest ±2 (mm) 50 * Overall Height of Legrest ±5 (mm) 450 450, 500, 550, N.A Overall Length of Legrest ±10 (mm) 1980 915, 1833, NA, 1200 Size OF SUPPORT for Top Pannel ±2 (mmxmm) 50 x 25 * Size of Supports on under Bottom Pannel of storage box ±2 (mmxmm) N.A * COLOUR & FINISHING Finish Polished Polished, Painted, Laminated, Teak laminate/ply with polish, Teak laminate/ply with melamine finish Colour of Paint teak * Colour of Lamination NA * All Visible Wood Parts to be Polished YES * 3/5 WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Padmakar Rustum 421502, MACHINE TOOL PROTOTYPE FACTORY ORDNANCE ESTATE, AMBARNATH 2 15

Compatible Cartridge ( 275 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class Compatible (Factory New) cartridge * Type of Cartridge Toner Ink, Toner, Drum Make of Compatible cartridge - * Model of Compatible cartridge - * Corresponding Part number/code of Compatible cartridge - * OEM Brand for which Compatible cartridge is suitable HP * OEM Ink/Toner/Drum Cartridge Model Number for which compatible cartridge is suitable SKRILL 88A * Printer Model number/numbers for HP LaserJet P1005, P1006, P1007, P1008 * 1/3 which Compatible cartridge is suitable Printer/HP LaserJet Pro P1106/P1108/M1136 MFP/M1213nf MFP. Compatible With - MFP M126nw, M128fn, M128fw MFP Yield of Compatible cartridge as per ISO IEC:19752/2004(E) for Bk & ISO/IEC:197 98/2007(E) for colour (C, M, Y& K individually)(No) 1500 Any applicable text(s) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 K Chandra Mohan 743144, PO - Ichhapur Nawabganj, North 24 Parganas 275 30

OEM Cartridge/Consumable ( 450 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number Samsung ML-D2850A Black Toner Cartridge * Corresponding Part number/code ML-D2850A/XIP * Printer Model number/numbers for which Cartridge is suitable ML-2850D, ML-2851ND * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 * 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 UJJWAL KANT 767070, ORDNANCE FACTORY BADMAL, AT/PO- BADMAL 450 90

Human Resource Outsourcing Service

Human Resource Outsourcing Service

Revolving Chair ( 65 ) ( Under PAC ) Make godrejinterio Model godrejinterio Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA 1/5 Colour of Fabric for Seat and Backrest RED * Ergonomic Seat Design true true, false Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism false * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, 2/5 Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A 3/5 Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 600 * Backrest Width ±10mm 480 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.4 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 680 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO 4/5 OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kapil Kumar 411003, General Manager, High Explosives Factory Khadki, Near Holkar Bridge, Caldicott Road, Khadki, Pune Maharashtra 411003 65 45

Human Resource Outsourcing Service

revolving chair ( PAC Only ) Revolving Chair ( 16 ) ( Under PAC ) Make godrejinterio Model godrejinterio Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA 1/5 Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, 2/5 Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A 3/5 Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram * DIMENSION Overall Chair Height ±15mm 950 * Backrest Height ±15mm 600 * Backrest Width ±10mm 480 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification YES YES, NO 4/5 OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lalitha V Pillai 411003, CQA (Ammunition) Khadki, Pune 16 45

Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 2 Year (s) Compatible Cartridge ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class Compatible (Factory New) cartridge * Type of Cartridge Toner Toner Make of Compatible cartridge - * Model of Compatible cartridge - * Corresponding Part number/code of Compatible cartridge - * OEM Brand for which Compatible cartridge is suitable HP * OEM Ink/Toner/Drum Cartridge Model Number for which compatible cartridge is 12A * 1/2 suitable Printer Model number/numbers for which Compatible cartridge is suitable 1020 * Yield of Compatible cartridge as per ISO IEC:19752/2004(E) for Bk & ISO/IEC:197 98/2007(E) for colour (C, M, Y& K individually)(No) 12A Any applicable text(s) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pranil Devidas Bhagat 425308, ORDNANCE FACTORY VARANGAON TALUKA - BHUSAWAL 200 45

COUNTER CHAIR COUNTER CHAIR ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Height Adjustment With Hydraulic With Hydraulic, Without Hydraulic Frame and support made of CHROME PLATED MS TUBES SS 304, SS 202, POWDER COATED MS TUBES, CHROME PLATED MS TUBES Chair Type REVOLVING REVOLVING, NON REVOLVING TYPE OF SEATING SEAT WITH SEPERATE BACKREST ONLY SEAT, SEAT WITH INTEGARTED BACK REST, SEAT WITH SEPERATE BACKREST Padestal Base Aluminium Die Cast Glass Fibre Nylon, ABS Plastic, Stainless Steel, Aluminium Die Cast Foot Rest With With, Without Padestal Base Type Without Wheels With minimum 5 Nos ABS/Nylon Twin Caster wheels, Without Wheels 1/3 Arms With With, Without SEAT MATERIAL CUSHIONED SEAT * Dimensions Shape of Seat Circular * Seat Size (mm x mm) 405mm dia * Height Adjustment in mm (+/- 5 mm) 250 * Padestal Size Diameter in mm (+/- 10 mm) 400 * Seat Height At Lowest Position in mm (+/- 10 mm) 500 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 * Density of Polyurethane Foam Used in Seat (Kg/Cub M) 40 * Material Material of Fabric of Seat Cover Leatherine * MISC Padestal Base Chrome Plated yes * Colour of Seat Black * MAX LOAD BEARING CAPACITY IN KG 110 * GSM/Thickness Of Fabric No Fabric * WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Velmurugan Balraj 560017, FOUNDRY AND FORGE DIVISION, HINDUSTAN AERONAUTICS LIMITED, VIMANAPURA, OLD AIRPORT ROAD 3 30

Modular Work Stations/Modular Staff Office

platform truck Platform Truck ( 6 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Conformity to Indian Standard IS:10311 latest IS:10311 latest ISI Marking No Yes, No CM/L number(if Yes) - * Rated load Capacity (Kg) 2000 2000 Make - * Model No - * Battery operated Yes * Type of Plateform Truck Fixed Low Lift, High Lift, Fixed No. of Wheels (nos.) 4.0 3, 4 Min Power Rating of DC Motor (Kw) 2.6 2.6, 3.6 Rated voltage of DC Motor (Volts) 36.0 36, 48 Confirmity to Indian Standard for DC Motor IS 10517-1983(Appendi x-A) * 1/5 Drive Gear * Tubular Lead Acid Traction Battery of minimum 299 Ah capacity @ 5 hr discharge Yes Yes Conformity to Indian Standrad for Traction Battery IS:5154:1980 latest * Battery Charger make - * Battery Charger model - * Minimum required charging current (Amp) 40.0 * Battery Charger shall be capable of charging fully discharged battery (up to 80%)in 10 hrs plus 2 hrs of cooling Yes * Overall Truck Size (LxWxH) (mm) - * Size of Platform (LxWxH) (mm) - * Platform Height (mm) 655.0 Any applicable numeric value Seating Height from ground (mm) 655.0 Any applicable numeric value Number of Seats (Nos.) 2.0 Any applicable numeric value Operating Floor Height (mm) 655.0 Any applicable numeric value Minimum Turning Radius (mm) 3250.0 Any applicable numeric value Drive Motor Make - * Drive Motor Model - * Drive Motor Rating - * Controller Make - * Controller Model - * Steering System Type - * Transmission Type - * Front Suspension Type - * Rear Suspension Type - * No. of Head Lights (Nos.) 2.0 Any applicable numeric value Ground clearance 250.0 Any applicable numeric 2/5 (mm) value Front Axle Type - * Type of Service Brake - * Type of Parking Brake - * Maximum Speed in unladen condition (Km/hr) 9.0 Any applicable numeric value Maximum Speed in laden condition (Km/hr) 7.0 Any applicable numeric value Wheel Base (mm) 1830.0 Any applicable numeric value Wheel Track (mm) 1080.0 Any applicable numeric value Type of Tyre Solid Solid, Pneumatic Tyre Size (mm) 535.0 Any applicable numeric value Detailed list of spares for 3 years shall be provided and supplied free of cost with the equipment Yes * Tare weight of Platform Truck (Kg) 1210.0 Any applicable numeric value Certification Paramerters Availability of complete & satisfactory test Report from Central govt/NABL/ILAC accredited laboratory Yes Yes Test Report Date - * Name of lab where test conducted - * Test certificate No - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kapil Kumar 411003, General Manager, High Explosives Factory Khadki, Near Holkar Bridge, Caldicott Road, Khadki, Pune Maharashtra 411003 6 45 3/5

revolving chair Revolving Chair ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type 360 Degree swivel, posture control with multilocking position synchronized mechanism * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA 1/6 Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, 2/6 Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 * Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A 3/6 Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 990 * Backrest Height ±15mm 460 * Backrest Width ±10mm 440 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 420 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.8 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO 4/6 OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJENDRA KUMAR TIWARI 461122, NH-69 BETUL ROAD ORDNANCE FACTORY ESTATE ORDNANCE FACTORY ITARSI (MP) 25 15

bathing soap Bathing Soap ( 14242 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes * BIS Marking false true, false CML Number NA * Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 75845 * Test Report Date 01/06/2018 * Name of the Lab GOVT LAB * Must declare (Write NA in case of NO against availability of Test Report) NA * Colour and Fragrance Colour RED * 1/2 Fragrance STANDARD * Weight Weight of Soap (Gms) 125 125.0 Packing Packing Material CASE PACKING Any applicable text(s) Number of Soaps in a Pack (Nos) 126 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 UJJWAL KANT 767070, ORDNANCE FACTORY BADMAL, AT/PO- BADMAL 14242 90

Executive Table ( PAC Only ) Executive Table ( 1 ) ( Under PAC ) Make deltawoods Model fieet1265 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided Both side One side, Both side, No Storage Keyboard tray Provided Provided, Not provided Foot rest Provided Provided, Not Provided MATERIAL Table top Material Three layer MDF board of grade 1/5 prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest, Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest, Other wood, NO Gable end and modesty panel Leg Material Carved teak wood Teak wood, NO LEGS MISC Table top long sides To be post form half round profile * Table top plain sides CP Teak Wood Lipping * Gable end and modesty panel plain side CP Teak Wood Lipping * 2/5 Number of buffers provided 4 Nos. at bottom * DIMENSION Thickness of table top ±2mm 9 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 9 * Length of table top ±10mm 1200 900, 1200, 1500, 1800, 2100, 1372, 1830 Depth of table ±10mm 650 * Height of table ±10mm 725 * Dimension of leg(mmXmm) ±5mm 50mmX50mm 40mmX40mm, 50mmX50mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Double storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 450mm * Depth of storage unit in mm (±10mm) 650 * Height of smallest storage unit ±5mm 75mm * Height of medium storage unit ±5mm 175mm * Height of largest storage unit ±5mm 255mm * KEYBOARD TRAY Type of keyboard tray Teak wood keyboard tray * Material of keyboard tray and Right angle L- type supporting bracket Other wood of standard quality * Keyboard adjustablity Adjustable keyboard arm * fixing of supporting bracket With telescopic * Length of telescopic channe±l0mm 250mm * Average weight of telescopic channel ±50Gms 500Gms per set * Keyboard front width±10mm 600mm * 3/5 Keyboard depth±10mm 500mm * Keyboard height±10mm 150mm * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm 2mm * FOOTREST Material of footrest Three layer prelaminated particles board(wood product)conforming to grade II type III of IS 12823/Latest * Length of footrest ±10mm 600mm * Depth of footrest ±10mm 350mm * Height of footrest ±10mm 125mm, 75mm * Finish of exposed edges CP Teak Wood Lipping * Material thickness of footrest ±2mm 9mm 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Teak laminate/ply with polish * Table top shade Teak * WARRANTY Warrantee period in number of years 3 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES * Product having BIFMA certification NO * OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * * Bold specifications are the golden parameters. 4/5 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ajeet Yadav 400001, CHEIF QULAITY ASSURANCE ESTT(WS) 9TH FLR NMRL BLDG TIGER GATE NAVAL DOCKYARD BALLARED ESTT MUMBAI-01 1 15

water storage tanks Water Storage Tanks ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes * ISI Marked true true CM/L No 9300058516 * Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank Number of Layers Double Layer Double Layer Capacity Capacity of the Tank (Litres) 1000 1000 Dimension Dimenstion of Tank as per IS 12701(latest) Yes * Uses Uses Out Door Use Out Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Yes * 1/2 Declared Parameters as per IS Specification Test Report No 873(A) * Test Report Date 26/10/2017 * Name of the Lab CIPET * Address of the Lab SP-1298 SITAPURA INDUSTRIAL AREA PHASE III TONK ROAD JAIPUR 302022 * Test Reports to be furnished to the buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 25 30

platform truck Platform Truck ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Conformity to Indian Standard IS:10311 latest IS:10311 latest ISI Marking No Yes, No CM/L number(if Yes) - * Rated load Capacity (Kg) 2000 2000 Make - * Model No - * Battery operated Yes * Type of Plateform Truck Fixed Fixed No. of Wheels (nos.) 4.0 4, 4.0 Min Power Rating of DC Motor (Kw) 2.6 2.6, 3.6 Rated voltage of DC Motor (Volts) 36.0 36, 48 Confirmity to Indian Standard for DC Motor IS 10517-1983(Appendi x-A) * 1/4 Drive Gear * Tubular Lead Acid Traction Battery of minimum 299 Ah capacity @ 5 hr discharge Yes Yes Conformity to Indian Standrad for Traction Battery IS:5154:1980 latest * Battery Charger make - * Battery Charger model - * Minimum required charging current (Amp) 40.0 * Battery Charger shall be capable of charging fully discharged battery (up to 80%)in 10 hrs plus 2 hrs of cooling Yes * Overall Truck Size (LxWxH) (mm) - * Size of Platform (LxWxH) (mm) - * Platform Height (mm) 655.0 Any applicable numeric value Seating Height from ground (mm) 655.0 Any applicable numeric value Number of Seats (Nos.) 2.0 Any applicable numeric value Operating Floor Height (mm) 655.0 Any applicable numeric value Minimum Turning Radius (mm) 3250.0 Any applicable numeric value Drive Motor Make - * Drive Motor Model - * Drive Motor Rating - * Controller Make - * Controller Model - * Steering System Type - * Transmission Type - * Front Suspension Type - * Rear Suspension Type - * No. of Head Lights (Nos.) 2.0 Any applicable numeric value Ground clearance 250.0 Any applicable numeric 2/4 (mm) value Front Axle Type - * Type of Service Brake - * Type of Parking Brake - * Maximum Speed in unladen condition (Km/hr) 9.0 Any applicable numeric value Maximum Speed in laden condition (Km/hr) 7.0 Any applicable numeric value Wheel Base (mm) 1830.0 Any applicable numeric value Wheel Track (mm) 1080.0 Any applicable numeric value Type of Tyre Solid Solid, Pneumatic Tyre Size (mm) 535.0 535, 535.0 Detailed list of spares for 3 years shall be provided and supplied free of cost with the equipment Yes * Tare weight of Platform Truck (Kg) 1210.0 Any applicable numeric value Certification Paramerters Availability of complete & satisfactory test Report from Central govt/NABL/ILAC accredited laboratory Yes Yes Test Report Date - * Name of lab where test conducted - * Test certificate No - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nishith Dwivedi 441906, EO SECTION, ORDNANCE FACTORY BHANDARA 3 30

Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 75 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Gas Cartridge Type Extinguishing Media Powder Based Powder Based Expellant Medium CO2 Cartridge Based CO2 Cartridge Based Constructional Foam Based Extinguishing Media NA * Powder Based Extinguishing Media BC * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) 9 9 Carbon Dioxide Based Fire NA 2, 3, 4.5, NA 1/3 Extinguisher Capacity (Kg) Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 12 Any applicable numeric value Rechargebale true * Color Coding Red * Fire Extinguisher Suitable for Class -A Fire false * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire true * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire false * Performance Operating Temperature (° C) -10° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=1 for Class-B * Effective Discharge Time for Fire Extinguisher, Min (Seconds) 20-24 Any applicable text(s) Fire Rating for Class -A Fire Extinguisher NA * Fire Rating for Class -B NA * 2/3 Fire Extinguisher Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 75 30

Portable Fire Extinguishers IS 15683 ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Gas Cartridge Type Extinguishing Media Foam Based Foam Based Expellant Medium CO2 Cartridge Based CO2 Cartridge Based Constructional Foam Based Extinguishing Media Aqueous Film Forming Foam (AFFF) * Powder Based Extinguishing Media NA * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) 9 9 Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, 4, 6, 9, NA Carbon Dioxide Based Fire NA 2, 3, 4.5, NA 1/3 Extinguisher Capacity (Kg) Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 14 Any applicable numeric value Rechargebale true * Color Coding Red * Fire Extinguisher Suitable for Class -A Fire true * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire false * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire false * Performance Operating Temperature (° C) +5° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min (Seconds) 13 Any applicable text(s) Fire Rating for Class -A Fire Extinguisher 4A * Fire Rating for Class -B 55B * 2/3 Fire Extinguisher Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 100 30

miniature circuit breakers, miniature circuit breakers Miniature Circuit Breakers ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 16 A 16 A Instantaneous Tripping Range B B, C Rated Voltage (Volt) 240 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP ISI marking Yes * CM/L No: - * CM/L Validity up to 31.12.18 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly Without * 1/6 pretreated stove enamelled/powder coated Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 300 30 Miniature Circuit Breakers ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 25 A 25 A Instantaneous Tripping Range C B, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP ISI marking Yes * 2/6 CM/L No: - * CM/L Validity up to 31/12/19 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without * Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Phool Bagh 300 30 Miniature Circuit Breakers ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 10 A 10 A Instantaneous Tripping Range B B, C 3/6 Rated Voltage (Volt) 240 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP ISI marking Yes * CM/L No: - * CM/L Validity up to 31.12.18 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without * Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Phool Bagh 300 30 Miniature Circuit Breakers ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification Yes * 4/6 IS/IEC 60898-1:2002 Rated Current (Ampere) 32 A 32 A Instantaneous Tripping Range B B, C Rated Voltage (Volt) 415 VOLT 240 VOLT, 415 VOLT No of poles/Protected poles(PP) 1pole with 1PP 1pole with 1PP ISI marking Yes * CM/L No: - * CM/L Validity up to 12/04/2018 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder coated Without * Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Phool Bagh 300 30

medical stools or chairs Medical Stools Or Chairs ( 35 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Material and shape of Stool Material of Back rest STEEL FRAME WITH CUSHION Any applicable text(s) Material of cushion BOUDED FOAM WITH LEATHRERITE Any applicable text(s) Cushioning in the stool Top with Cushion with Cushion, Without cushion Finish CHROME Any applicable text(s) Design of Back rest HALF ROUND halfround Back rest support Frame Material ERW MS FRAME Any applicable text(s) No of Legs in the under structure 5 5 Foot rest With With, Without Shape of stool top Round * Material of Top Mild Steel Stainless Steel, wood, Mild Steel Covering material of cushion LEATHRITE * 1/3 Leg shoe Material WITH CATED WARFARE LEG Any applicable text(s) Painting Polishing Stove enamel, Powder coating, Polishing, Others Density of Cushion (Kg/cub metre) 73 40, 45, 45kgcub.metre, 73 Type of Stool Revolving Revolving Material of Under Structure MA AND GAS LIFT%PRONGE BASE Any applicable text(s) Back rest With With Dimensions Adjustable Height true true Normal Height (mm) 433 50-1000 Back rest height (mm) 777 Any applicable text(s) Min. Height (mm) 433 50-1000 Diameter/Side length of Top (mm) 392 Any applicable text(s) Thickness/Size of Under structure Frame (mm) 14.8 Any applicable text(s) Thickness of cushion (mm) 71 Any applicable text(s) Max. height (mm) 611 50-1000 Back rest Thickness (mm) 73 Any applicable text(s) Stool Top base Thickness (mm) 15 1.0E-6-100 Over all width/Diameter (mm) 392 Any applicable text(s) Drawing and product code Drawing No. available on web false * Drawing No. NA * Product Code No. NA * Product Code available on web false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Balasaheb Chothe 422207, HINDUSTAN AERONAUTICS LIMITED 35 90 2/3 AIRCRAFT MANUFACTURING DIVISION OJHAR

Layer 2 Access Switch ( PAC Only ) Layer 2 Access Switch ( 7 ) ( Under PAC ) Make cisco Model cisco2960x-24td-l Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed Technology Non PoE Non PoE Number of 1G Copper Ports 24 24 Number of 10G Copper Ports 0 0 No. of 1 G SFP Port (Uplink) 0 0 No. of 10 G SFP+ Port (Uplink) 2 2 Multi-Gigabit Support No No Redundant Power supply ( from day one) Supported Supported 1/4 Console Port Available * Switching Capacity -Non Blocking (Gbps) 216 * Throughput (MPPS) 95.2 * Operating System available * Dedicated Stacking Port/Slot ( from day one) available * Stacking Bandwidth (Gbps) 80 * Basic Layer-3 Protocol Advanced L3 features like static IP routing, RIP, PIM, OSFP & PBR from day 1. Bidder need provide all necessary license. * Security Feature EAL/NDPP & IPv6 Logo certified. IPv6 Binding Integrity Guard, IPv6 Snooping, IPv6 RA Guard, IPv6 DHCP Guard, IPv6 Neighbor Discovery Inspection and IPv6 Source Guard. 802.1x authentication and accounting, IPv4 and IPv6 ACLs and Dynamic VLAN assignment. Switch should support port security, DHCP snooping, Dynamic ARP inspection, IP Source guard, BPDU Guard, Spanning tree root guard. * Management Protocol SSHv2, SNMPv2c, SNMPv3, NTP, RADIUS and TACACS+ . IEEE Standards of Ethernet: IEEE 802.1D, 802.1s, 802.1w, 802.1x, 802.3ad, 802.3x, 802.1p, 802.1Q, 802.3, 802.3u, 802.3ab, 802.3z. Support external/internal internal power supply. 12 K MAC Addresses and 250 active Vlans. Application visibility and traffic monitoring with minimum 12 K * 2/4 netFlow/sflow/jflow entries QoS Eight egress queues per port. Energy- efficient Ethernet (EEE) support reduces power consumption in accordance with IEEE 802.3az Support ACL for both for ingress and egress port. Cross- stack QoS to allow QoS to be configured across a stack All the Layer 2 Access switch from same family can be stack as an when needed using delicated stacking port and cable. 24 Port and 48 Port switch must be stack together, Bidder has to submitted OEM Authorizatioin for this Bid. * Operating Temperature Range (Degree C) -5 to 45 °C * Operating Humidity (RH)(%) 10% to 90% * IPv6 Ready from day one and dully certified Yes * PoE Power Budget ( Watt ) 0 * on Site OEM Warranty 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Balasaheb Chothe 422207, HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING DIVISION OJHAR 7 90

Layer 2 Access Switch ( PAC Only ) Layer 2 Access Switch ( 6 ) ( Under PAC ) Make cisco Model cisco2960x-48ts-l Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed Technology Non PoE Non PoE Number of 1G Copper Ports 48 48 Number of 10G Copper Ports 0 0 No. of 1 G SFP Port (Uplink) 4 4 No. of 10 G SFP+ Port (Uplink) 0 0 Multi-Gigabit Support No No Redundant Power supply ( from day one) Not available Not available, Supported 1/3 Console Port Available * Switching Capacity -Non Blocking (Gbps) 216 * Throughput (MPPS) 107.1 * Operating System available * Dedicated Stacking Port/Slot ( from day one) available * Stacking Bandwidth (Gbps) 80 * Basic Layer-3 Protocol NA, Bidder has to submit the valid MAF pertaining to this bid. * Security Feature IEEE 802.1X, ipv6 First Hop Security, Private VLANs, Unicast Reverse Path forwarding, Multidomain Authentication, ACLs, SSH, Port Mirroring, TACACS+ and RADIUS Authentication, BPDU Guard, Spanning Tree Root Guard, IGMP Filtering * Management Protocol SSH, SNMP, RMON * QoS Eight egress queues, Shaped round robin, Rate limiting, 802.1p CoS, Rate limiting * Operating Temperature Range (Degree C) -5 degree C to 45 degree C * Operating Humidity (RH)(%) 10% to 95% noncondensing * IPv6 Ready from day one and dully certified Yes * PoE Power Budget ( Watt ) 0 * on Site OEM Warranty 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Balasaheb Chothe 422207, HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING 6 90 2/3 DIVISION OJHAR

Layer 2 Access Switch ( PAC Only ) Layer 2 Access Switch ( 12 ) ( Under PAC ) Make cisco Model cisco2960x-24ts-l Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed Technology Non PoE Non PoE Number of 1G Copper Ports 24 24 Number of 10G Copper Ports 0 Any applicable numeric value No. of 1 G SFP Port (Uplink) 4 4 No. of 10 G SFP+ Port (Uplink) 0 0 Multi-Gigabit Support No No Redundant Power supply ( from day one) Supported Not available, Supported 1/4 Console Port Available * Switching Capacity -Non Blocking (Gbps) 216 * Throughput (MPPS) 71.4 * Operating System available * Dedicated Stacking Port/Slot ( from day one) available * Stacking Bandwidth (Gbps) 80 * Basic Layer-3 Protocol Advanced L3 features like static IP routing, RIP, PIM, OSFP & PBR from day 1. Bidder need provide all necessary license. * Security Feature EAL/NDPP & IPv6 Logo certified. IPv6 Binding Integrity Guard, IPv6 Snooping, IPv6 RA Guard, IPv6 DHCP Guard, IPv6 Neighbor Discovery Inspection and IPv6 Source Guard. 802.1x authentication and accounting, IPv4 and IPv6 ACLs and Dynamic VLAN assignment. Switch should support port security, DHCP snooping, Dynamic ARP inspection, IP Source guard, BPDU Guard, Spanning tree root guard. * Management Protocol SSHv2, SNMPv2c, SNMPv3, NTP, RADIUS and TACACS+ . IEEE Standards of Ethernet: IEEE 802.1D, 802.1s, 802.1w, 802.1x, 802.3ad, 802.3x, 802.1p, 802.1Q, 802.3, 802.3u, 802.3ab, 802.3z. Support external/internal internal power supply. 12 K MAC Addresses and 250 active Vlans. Application visibility and traffic monitoring with minimum 12 K * 2/4 netFlow/sflow/jflow entries QoS Eight egress queues per port. Energy- efficient Ethernet (EEE) support reduces power consumption in accordance with IEEE 802.3az Support ACL for both for ingress and egress port. Cross- stack QoS to allow QoS to be configured across a stack All the Layer 2 Access switch from same family can be stack as an when needed using delicated stacking port and cable. 24 Port and 48 Port switch must be stack together * Operating Temperature Range (Degree C) -5 to 45 °C * Operating Humidity (RH)(%) 10% to 90% * IPv6 Ready from day one and dully certified Yes * PoE Power Budget ( Watt ) 0 * on Site OEM Warranty 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Balasaheb Chothe 422207, HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING DIVISION OJHAR 12 90

LED Lamps- bulb LED Lamps- Bulb ( 1700 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 7Watt/700 lumens 7Watt/700 lumens Colour Temperature (K) 6500 6500 Type of Lamp CAP B22d B22d Warranty for free replacement (Years) 3 Years 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * 1/3 Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) LED * LED Make Bajaj * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. - * LED life Certificate Test Report Date - * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number - * LED Lamp Life Certificate date - * Name of Lab where test conducted - * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. - * Test Report Date - * Name of lab where test conducted - * Complusory Registration(CRS) of Yes * 2/3 BIS for safety as per IS 16102-I * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Singh Khati 242001, ORDNANCE CLOTHING FACTORY MINISTRY OF DEFENCE SHAHJAHANPUR 1700 30

Air Conditioner

power cable for direct burial xlpe ugac cable Power Cable For Direct Burial Xlpe Ugac Cable ( 1000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Buying Through bidding only * Size of Cable (in Sq.mm) 16.0 16.0 Number of cores (nos) 4 4 Cable Type Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 BIS marked yes * BIS certificate number 7167980 * Armouring Galvanised steel Strip armoured Galvanised round steel wire armoured, 1/3 Galvanised steel Strip armoured, unarmoured Armouring Type single wire or strip armouring single wire or strip armouring, Double wire or strip armouring shape of conductor Stranded Solid, Stranded, Stranded and Shaped CONSTRUCTIONAL Number of armouring strip/wire for each size of cable 4 X 0.8 +/- 10 Persent * size of armouring strip/wire for each size of cable 4 X 0.8 +/- 10 Persent * Material of conductor Aluminium EC Grade * Weight of finished cable per meter 5 * In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable and Drum Number shall be embossed on every metre of the cable yes * standard cable length on a drum 500 meter for cable size up to and including 185 sqmm. * Part length which can be supplied by seller (meter) 100 * cable to be supplied on wooden drums conforming to IS: 10418/82 with latest amendments. yes * Quantity supplied shall not be more than the ordered quantity. yes * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings. yes * Type Test Certificate CDD-092 * 2/3 No. Type Test Certificate date 21-10-2016 * Name of Lab CPRI * Address of Lab C.V Raman Road, Shastri Nagar, Banglore * Test Report to be furnished to the buyer on demand yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 1000 15

power cable for direct burial xlpe ugac cable Power Cable For Direct Burial Xlpe Ugac Cable ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of Buying Through bidding only * Size of Cable (in Sq.mm) 240.0 240.0 Number of cores (nos) 3.5 3.5 Cable Type Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 BIS marked yes * BIS certificate number CM/L No. - 3023633 * Armouring Galvanised steel Strip armoured Galvanised round steel wire armoured, 1/3 Galvanised steel Strip armoured, unarmoured Armouring Type single wire or strip armouring single wire or strip armouring, Double wire or strip armouring shape of conductor Stranded and Shaped Solid, Stranded, Stranded and Shaped CONSTRUCTIONAL Number of armouring strip/wire for each size of cable 26 STRIPS * size of armouring strip/wire for each size of cable 4X0.80 MM * Material of conductor Aluminium EC Grade * Weight of finished cable per meter 3.280 Kg * In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable and Drum Number shall be embossed on every metre of the cable yes * standard cable length on a drum 500 meter for cable size up to and including 185 sqmm. * Part length which can be supplied by seller (meter) 100 * cable to be supplied on wooden drums conforming to IS: 10418/82 with latest amendments. yes * Quantity supplied shall not be more than the ordered quantity. yes * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings. yes * Type Test Certificate 100-171225-28 * 2/3 No. Type Test Certificate date 17.01.2018 * Name of Lab GTL GHAZIABAD * Address of Lab GHAZIABAD UP * Test Report to be furnished to the buyer on demand yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 500 15

water storage tanks Water Storage Tanks ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes * ISI Marked true true CM/L No 7075672 * Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank Number of Layers Double Layer Double Layer Capacity Capacity of the Tank (Litres) 500 500 Dimension Dimenstion of Tank as per IS 12701(latest) Yes * Uses Uses Out Door Use Out Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Yes * 1/2 Declared Parameters as per IS Specification Test Report No 2017-10-078 * Test Report Date 20/09/2017 * Name of the Lab Sintex Industries Ltd. * Address of the Lab Kalol, Gujrat * Test Reports to be furnished to the buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 50 30

lead acid battery Lead Acid Battery ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Hard Rubber Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 7 7 Warranty (Years) 2 Years 2 Years Battery Condition Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte 80 * 1/3 (ml) Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab NA * Name of the Lab NA * Test Report No. NA * Test Report Date 01-02-2018 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications 76854898 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Singh Khati 242001, ORDNANCE CLOTHING FACTORY MINISTRY OF DEFENCE SHAHJAHANPUR 300 30

Digital Storage Oscilloscope ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values PERFORMANCE FEATURES Bandwidth 70 * Bandwidth Upgradability no yes, no Operating System NA Windows, Non -Windows, NA INPUT CHANNELS Type of input channels Analog Analog, Analog and Digital (Mixed Signal) Number of Analog Channels 4 2, 4 Record Length Per Analog Channel Simultaneously 5oM points 2500 points, 10000 points, 1M points, 4M points, 10M points, 100K points, 20M points, 5oM points, 2M points Sampling Rate Per Analog Channel Simultaneously 2 GS/sec 250 MS/sec, 500 MS/sec, 1 GS/sec, 2 GS/sec, 4 GS/sec, 5 GS/sec, 10 GS/sec, 20 GS/sec, 2.5 GS/sec, 40 GS/sec 1/5 Digital Channels no yes, no Number of Digital Channels NA 8, 16, NA Record Length Per Digital Channel Simultaneously NA 100K point, 500K point, 1M point, 2M point, 4M point, 8M point, 16M point, 32M point, 64M point, NA Sampling Rate Per Digital Channel Simultaneously NA 500MS/sec, 1GS/sec, 2GS/sec, NA DISPLAY Display Type colour LCD colour LCD, colour TFT, colour LED, monochrome CRT Minimum Display Size 8 * MEASUREMENTS FEATURES Vertical Sensitivity 1mV/Div to 5 V/Div * Vertical Resolution 8 * Frequency Analysis Feature yes * In-built Frequency Counter yes * In-built Function Generator no * Time Base Range 1ns/Div To 50s/Div * Time Base Accuracy 25 * GENERIC Minimum Detectable Pulse Width 1 * Memory Upgradability no * Segmented Memory Feature Availability yes * Waveform Update Rate (Waveform/sec) 100000 * Coupling AC, DC, GND * Trigger Types Edge, pulse width, video, pattern/state, External, r unt, setup/hold, pattern * Measurements Math function-Add, subtract, multiply, divide, Automatic Measurements of Amplitude and time, FFT (phase), low-pass filter, Frequency Domain function, Time & Voltage cursors, FFT (magnitude), Automatic * 2/5 Measurements related to combination, histogram and communication Acquisition Modes Normal, Peak Detect, Averaging, High Resolution * I/O Interface USB, LAN Port/GPIB, Software for waveform analysis * Power Source 230 V AC * Any other features, if applicable NA * ACCESSORIES Standard Accessories to be supplied X1/X10 Switchable Probe Per Channel, Manual & Software CD, Calibration Certificate, Power Cord * OPERATING CONDITION Minimum Operating Temperature 10 * Maximum Operating Temperature 40 * Operating Humidity (RH) 90 * SERVICE Warranty 1 1, 2, 3, 4, 5 (or higher) TEST REPORT DETAILS & TESTS conformity to Dry Heat for 16 hrs at specified maximum temp, in accordance with IS:900 0/part-3/section-5/1977 latest no * conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 latest no * conformity to Cold Test for 4 hrs at specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest no * Availability of Test Reports from Central Govt/NABL approved/ILAC yes yes, NO 3/5 acredited lab to prove conformity to the specification Test Report Number and date for specification(not a part of biddable parameter) - * Name and Address of the Test lab(not a part of biddable parameter) - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Padmakar Rustum 421502, MACHINE TOOL PROTOTYPE FACTORY ORDNANCE ESTATE, AMBARNATH 10 60

Air Conditioner ( 86 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Inverter (Variable Speed) Inverter (Variable Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.5 Ton/4500 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre * Packing LIst REMOTE, CELL * Any other Features SLEEP TIMER, POWER COOLING * 1/3 CONFORMITY CERTIFICATION BEE Star Rating 5 5 Conformity to Indian Standard IS 1391 latest * WARRANTY Warranty on Machine 5 5.0 Warranty on Compressor 10 10.0 (or higher) INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manas Kumar Jha 226016, Indira Nagar, Faizabad Road 86 45

Small form-factor pluggable transceiver ( PAC Only ) Small Form-factor Pluggable Transceiver ( 60 ) ( Under PAC ) Make cisco Model ciscoglc-lh-smd Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Type of Transceiver SFP SFP SFP Mode Single * Supported Protocols NA * Compatability with OEMs Products CISCO * Wavelength(nm) 1310 * Fibre Cable Type Single Mode * Core Size (Micron) 0 * Maximum Data Rate 1 * Modal Bandwidth (MHz/Km) 0 * Max.Cable Distance 10000 * Optical Component 1310 * 1/3 (nm) Digital Optical Monitoring (DOM) Support Yes * Interface LC * Tx Power (dBm) -3 * Receiver Sensitivity (dBm) -9.5 * Operating Temperature Range(Degree C) -20 * Operating Humidity (RH) (%) NA * On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Balasaheb Chothe 422207, HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING DIVISION OJHAR 60 90

Utility Vehicles

line matrix printer ( PAC Only ) Line Matrix Printer ( 1 ) ( Under PAC ) Make lipidatasystems Model lipi6815l Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Line Matrix Printer Standard Standard, High Definition Print Method Impact Line Matrix * Type of Enclosure Cabinet * Print Speed of Standard LMP ( High Speed Draft Mode, Upper Case ) (Lines per minute) 1500 1500 Print Speed at 180 x 180 dpi ( For High Definition LMP) (Inches per minute) NA 36, 64, 79, NA Graphic Resolution (Horizontal) (Dots per inch) 240 * Graphic Resolution (Vertical) (Dots per 288 * 1/3 inch) Print Width (Column) (Number) 136 * Acoustics (Noise level while printing) (dBA) 52 * Forms Handling/Paper Hadling Continuous, Fan Folded, Edge perforated * Media Width Handling (Minimum to Maximum) (mm) 76 to 432 * Fonts Supported Draft, Data processing, Gothic, Courier, OCR A, OCR B * Print Attributes Bold, Italic, Double Width, Double Height, Overstrike, Underline, Subscript and Superscript etc. * Printer Support Softwares PrintNet Remote Management Software, SAP Device Support and Printer Drivers * Mean Time Between Failure ((POH) Power On Hours) 10000 * Serial port (Nos.) 1 * Parallel Port (Nos.) 1 * Ethernet Port (Nos.) 1 * USB Port (Nos.) 1 * Mean Time Between Failure (MTBF) 10000 * Power supply 230 V AC * Power consumption in Standby Mode (Watt) 7 * Power consumption in Operating Mode (Watt) 310 * BIS Registration under CRS of Meity Yes * BIS Registration Number - * Overall Dimensions (L x W x H) (mm x mm x mm) 1070 x 640 x 530 * Weight (Kg) 73 * Availability of Test No * 2/3 Reports from Central Govt/NABL/ILAC accredited Lab showing Conformity to the specifications if Yes, Test Report Number - * If Yes, Test Report Date - * If Yes, Name of Test Lab - * If Yes, Address of the Test Lab - * Free installation and demonstration Yes * On Site OEM Warranty (Years) 1 1, 2, 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahesh Chand Bairwa 421502, Ordnance Factory Ambernath Ambernath, Thane 421502 1 15

Line Intractive UPS with AVR Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Line Intractive UPS With AVR ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 2.0/1600 2.0/1600, 2.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 2 Years 2 Years 1/4 Installation and commissioning instructions Yes * CONSTRUCTIONAL Type of enclosure ABS * AC out put for printer (not through inverter) Yes Yes, No Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * Protection for over voltage and over load Yes * 2/4 REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes * Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dipak Chourasia 403802, Goa Shipyard Limited, Vaddem, Vasco da Gama 2 30

Desktops

OEM Cartridge/Consumable ( PAC Only ) OEM Cartridge/Consumable ( 50 ) ( Under PAC ) Make samsung Model samsungmlt-d110sblacklasertoner Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number Samsung MLT-D110S Black Laser Toner * Corresponding Part number/code MLT-D110S/XIP * Printer Model number/numbers for which Cartridge is suitable SL-M2060, SL-M2010, S L-M2060NW, SL- M2060FW, SL-M2060W * Yield of the Cartridge 1000 * 1/2 as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Balasaheb Chothe 422207, HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING DIVISION OJHAR 50 30

Filtering Half Mask-Air Pollution Mask ( PAC Only ) Filtering Half Mask-Air Pollution Mask ( 8000 ) ( Under PAC ) Make 3m Model 3m9000ing Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Classification of filtering Half mask FFFP1 TO IS :9473:2002(Latest) FFFP1 TO IS :9473:2002(Latest), FFP2 tO IS :9473:2002 (Latest) Type of mask valve less valve less Use Single Single STANDARDS ISI Marked true true BIS Licence No (CML No) 6801064 * MATERIAL Mask construction material Entirely inseparable fillter material Entirely inseparable fillter material, Inseparable main fillter & additional replaceable pre-filter Weight of single mask (gms) 7 Any applicable numeric value 1/4 CONSTRUCTION No of valves No single, double, No Foldable true true, false Nose clip with with Head harness Self adjusting/Elastic adjustable, Self adjusting/Elastic Filter penetration S"Solid" * Clogging perfomance D(Dolamite dust) * REPORTS Submission of test repot on form 39 or from central Govt/NABL/ILAC accredited lab at the time of supply YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 8000 15

LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 350 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated Power 45W 45W 1/7 Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP67 * Warranty for free replacement (in years) 5 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Junctiojn/Soldering Yes * 2/7 point temperature shall not exceed 85 deg.c as per LM 80 report Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED section and driver IP66 * 3/7 section) as per IS:10322 (Part 1):1982 latest Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 4 Nos. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 100 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the Engraved/Embossed * 4/7 aluminium die cast body " Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Ref. Yes * 5/7 IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 350 60

Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 90 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Stored Pressure, Gas Cartridge Type Extinguishing Media Foam Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium CO2 Cartridge Based CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media Aqueous Film Forming Foam (AFFF) * Powder Based Extinguishing Media NA * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) 9 2, 4, 6, 9, NA 1/4 Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, NA Carbon Dioxide Based Fire Extinguisher Capacity (Kg) NA 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 13 Any applicable numeric value Rechargebale true * Color Coding Yellow * Fire Extinguisher Suitable for Class -A Fire true * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire false * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire false * Performance Operating Temperature (° C) +5° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min 20 Any applicable text(s) 2/4 (Seconds) Fire Rating for Class -A Fire Extinguisher 4A * Fire Rating for Class -B Fire Extinguisher 34B * Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 90 90

water storage tanks Water Storage Tanks ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes * ISI Marked true true CM/L No 9917001 * Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank Number of Layers Double Layer Double Layer Capacity Capacity of the Tank (Litres) 500 500 Dimension Dimenstion of Tank as per IS 12701(latest) Yes * Uses Uses Out Door Use Out Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Yes * 1/2 Declared Parameters as per IS Specification Test Report No 2017-09-DW-089 * Test Report Date 21-9-17 * Name of the Lab SINTEX INDUSTRIES LTD. * Address of the Lab KALOL NORTH GUJARAT * Test Reports to be furnished to the buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Neelam Jaiswal 422207, HINDUSTAN AERONAUTICS LTD, OJHAR MIG 200 30

Human Resource Outsourcing Service