Loading
Loading…
Loading…
2,900 results • Latest
Televisions
plywood
plywood
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 1519 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 80-95 Tensile Index MD in Nm/g 45 * Tensile Index CD in Nm/g 30 * Opacity in % 90 * 1/2 Tear Index (Avg) in Nm.m²/g 6 * Smoothness for both sides (Bendtsen) in ml/min 300 * Thickness in µm 100 * Moisture in % 5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudhir Kumar Dixit 208009, Kalpi Road Kanpur 1519 60
miniature circuit breakers Miniature Circuit Breakers ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification IS/IEC 60898-1:2002 Yes * Rated Current (Ampere) 40 A 40 A Instantaneous Tripping Range C C Rated Voltage (Volt) 415 VOLT 415 VOLT No of poles/Protected poles(PP) 3pole with 3PP 3pole with 3PP ISI marking Yes * CM/L No: - * CM/L Validity up to 15/08/2018 * CONSTRUCTIONAL Steel sheet enclosure for MCB of 1.2 mm thickness duly pretreated stove enamelled/powder Without * 1/2 coated Rated Short circuit capacity (Ampere) 10000 A * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for each rating. yes * Test Report number - * Date of issue of Test Report by Laboratory - * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudhir Kumar Dixit 208009, Kalpi Road Kanpur 100 60
COUNTER CHAIR COUNTER CHAIR ( 12 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Height Adjustment With Hydraulic With Hydraulic, Without Hydraulic Frame and support made of SS 202 SS 304, SS 202, POWDER COATED MS TUBES, CHROME PLATED MS TUBES Chair Type REVOLVING REVOLVING, NON REVOLVING TYPE OF SEATING SEAT WITH INTEGARTED BACK REST ONLY SEAT, SEAT WITH INTEGARTED BACK REST, SEAT WITH SEPERATE BACKREST Padestal Base Stainless Steel Glass Fibre Nylon, ABS Plastic, Stainless Steel, Aluminium Die Cast Foot Rest With With, Without Padestal Base Type With minimum 5 Nos ABS/Nylon Twin Caster wheels With minimum 5 Nos ABS/Nylon Twin Caster wheels 1/3 Arms With With, Without SEAT MATERIAL SS 202 * Dimensions Shape of Seat Circular, rectangular * Seat Size (mm x mm) 430mm x 430mm * Height Adjustment in mm (+/- 5 mm) 150 * Padestal Size Diameter in mm (+/- 10 mm) 500 * Seat Height At Lowest Position in mm (+/- 10 mm) 550 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 * Density of Polyurethane Foam Used in Seat (Kg/Cub M) 45 * Material Material of Fabric of Seat Cover Fabric * MISC Padestal Base Chrome Plated yes * Colour of Seat Blue * MAX LOAD BEARING CAPACITY IN KG 75 * GSM/Thickness Of Fabric 200 * WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Velmurugan Balraj 560017, FOUNDRY AND FORGE DIVISION, HINDUSTAN AERONAUTICS LIMITED, VIMANAPURA, OLD AIRPORT ROAD 12 30
Air Conditioner
non modular elecrical switches and accessories flush type Non Modular Elecrical Switches And Accessories Flush Type ( 1500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Electrical Accessory for domestic & similar purpose Fan Regulator, Step Type, Capacitor Type, suitable for fan upto 100W as per IS:11037:1984 with latest amendments Fan Regulator, suitable for fan upto 100W as per IS:11037:1984 with latest amendments Product ISI Marked No Yes, No Valid BIS License Number - * CONSTRUCTIONAL Shutter with socket Without * Current carrying part must be of Brass, Copper, or any other superior material Yes * Type of Accessories Flush Type * Body material Polycarbonate Electrical Grade * Color as seen from front (Matching with White * 1/3 other accessories) Accessories shall be provided with fixing screw with each set of packing Yes * Mechanical Strength of Coaxial Antina Socket, Telephone Jack and Indicator as per IS:3854 NA * FUNCTIONAL Rated Voltage (Volt) 250 vOLT * Resistance to Abnormal Heat and Fire of Coaxial Antina Socket, Telephone Jack and Indicator as per IS:3854 NA * CERTIFICATIONS Availability of complete and satisfactory type test Report from Central govt/NABL ILAC accredited laboratory to prove conformity to the specification Yes * Name of lab where test conducted - * Test certificate number - * Test report date - * Test report to be submitted to the Buyer on Demand Yes * Marking of manufacturer name Trade mark on accessories Yes * OEM Product Series - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 1500 60
Printer or photo Copier Paper Experience with Gov. Required 1 Year (s) Printer Or Photo Copier Paper ( 700 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 95 80-95 Tensile Index MD in Nm/g 45 * Tensile Index CD in Nm/g 30 * 1/2 Opacity in % 90 * Tear Index (Avg) in Nm.m²/g 5 * Smoothness for both sides (Bendtsen) in ml/min 200 * Thickness in µm 100 * Moisture in % 5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A 13 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tirthbasi Barik 700028, Ordnance Factory Dumdum, Jessore Road, Kolkata 700 15
Multifunction Machines
Unplasticized PVC pipes for potable water Supplies Unplasticized PVC Pipes For Potable Water Supplies ( 618 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type of Pipe Type of Pipes Socket pipe for solvent cement jointing Plain ended pipe, Socket pipe for elastromeric sealing ring jointing, Socket pipe for solvent cement jointing Classification of Pipes(Working pressure (PN)) Class 2 (0.4MPa) Class 1(0.25MPa), Class 2 (0.4MPa), Class 3 (0.6MPa), Class 4 (0.8MPa), Class 5 (1.0MPa), Class 6 (1.25MPa) Specification Conforming to Indian standard IS 4985: Latest Yes * ISI Marked false true, false CML No (Hints-if ISI Marked 7355072 * Design Elastrometric Ring false true, false Type of end Socket end one sided Plain end both side, Socket end one sided, 1/3 Socket end both side Dimension Nominal Outer Diameter (in mm) 90 90 Length (meter) 6 3, 4, 5, 6, 7, 8, 9, 10 Marking Marking as per IS Specification Yes * Marking Colour Green * Test Report Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false * Test Report No 4985 * Test Report Date 2000 * Name of the Lab NA * Address of the Lab NA * Test Report to be furnished to the buyer on demand false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilip Shankar Kharade 249201, OFFICER COMMANDING 531 SS & TC GREF NEAR RLY STATION RISHIKESH 618 15
automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Without Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian NA for Tubeless TYRES IS:13098 latest for 1/4 Standrad for Pneumatic Tubes Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres - * ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - * Type of tube NA for Tubeless and without tube * Manufactures name and Trade Name - * Tyre-size Designations F78-15 4PR * Tube-size Designations NA * Structure of Tyre Bias-belted Diagonal or bias ply, Bias-belted, Radial, Reinforced or Extra Load Ply Rating 4 * Speed Category - * Load indicas - * Side Well (mm) 110 * Inner area of Tyers (mm) 100 * Section Width (min)(mm) 6 * Overall Width (max)(mm) 6.5 * Section Height (mm) 15 * Nominal Aspect Ratio(mm) 15 * Outer diameter (min)(mm) 605 Any applicable numeric value Nominal Rim Diameter(mm) 381 Any applicable numeric value Maximum load Rating(%) 565 Any applicable numeric value Conformity to AIS-044 Yes * Availability of Type Test Report covering complete test YES * 2/4 parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. Test cetificate No. - * Test Report Date - * Name and address of the Lab where test Conducted - * Others Certificate ie ROHS, WHO, GMP etc - * Warranty Time 2 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramjit Prasad 461114, CENTRAL PROOF ESTABLISHMENT ITARSI (MP) NH-69 8 15
automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 7 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Special use Tyre: mixed used Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Without Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian NA for Tubeless TYRES IS:13098 latest for 1/4 Standrad for Pneumatic Tubes Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres - * ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - * Type of tube NA for Tubeless and without tube * Manufactures name and Trade Name - * Tyre-size Designations 1200x20 * Tube-size Designations NA * Structure of Tyre Reinforced or Extra Load Diagonal or bias ply, Bias-belted, Radial, Reinforced or Extra Load Ply Rating 18 * Speed Category - * Load indicas - * Side Well (mm) 325 * Inner area of Tyers (mm) 22.5 * Section Width (min)(mm) 312 * Overall Width (max)(mm) 12 * Section Height (mm) 20 * Nominal Aspect Ratio(mm) 20 * Outer diameter (min)(mm) 1135 Any applicable numeric value Nominal Rim Diameter(mm) 8.5 Any applicable numeric value Maximum load Rating(%) 3725 Any applicable numeric value Conformity to AIS-044 Yes * Availability of Type Test Report covering complete test YES * 2/4 parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. Test cetificate No. - * Test Report Date - * Name and address of the Lab where test Conducted - * Others Certificate ie ROHS, WHO, GMP etc - * Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramjit Prasad 461114, CENTRAL PROOF ESTABLISHMENT ITARSI (MP) NH-69 7 20
alumino ferric Alumino Ferric ( 100000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 299:Latest YES * ISI Marked true true BIS Licence Number 8200015495 * Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES YES Test Report Number 1876/2016-17 * Test Report Date 02.01.2017 * Name of the Lab M.P.L.U.N Bhopal * Address of the Lab Bhopal * Test report to be furnished to the buyer on demand YES * Grade Grade Grade 4 (in solid form * 1/2 for treatment of water intended for drinking) Packing Packing Size (Kg) 25 Any applicable numeric value Packing Material 25 kilogram * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akhilesh Kumar 482005, Ordnance Factory Khamaria, Jabalpur 100000 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Canon * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number CRG 326 * Corresponding Part number/code 3483B003AA * Printer Model number/numbers for which Cartridge is suitable LBP6230dn * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 * 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 KRUSHNAPRASAD SARANGI 700001, 10A, S K BOSE ROAD, KOLKATA - 700001 50 15
cotton towels Cotton Towels ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification IS:7056/1989 Latest BIS specification No- IS:7056/1989 Latest, As per QR/specification for Cotton Terry Towel prepared by Northern India Textile Research Association, Sector 23, Raj Nagar, Ghaziabad, UP and approved by MHA vide letter No. - U- II-25/2011-12- Prov- ( CoBRA ) dated 11-02-2013 CERTIFICATION CM/L No and date NA * SIZE Size ( Lenght X Width ) (cm X cm) 155 X 80 60 X 40, 100 X 50, 112 X 66, 125 X 60, 150 X 75, 155 X 80, 145 X 72.5 CONSTRUCTION WEAVE Construction/Weave TERRY Terry ( as per IS ), Huck-a-Back ( as per IS ), Terry as per MHA approved specification 1/3 COLOUR Colour BLEACHED WHITE Bleached White, Sky Blue as per MHA approved specification, Any other colour as per buyer's requirements, Striped TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab true true, false Name of the Lab NA * Address of The Lab NA * Test Report No. NA * Test Report Date NA * Test Report to be furnished to buyer on demand, if claimed to be available Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 300 15
automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Special use Tyre: mixed used Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres With Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian IS:13098 latest for IS:13098 latest for 1/3 Standrad for Pneumatic Tubes Automotive vehicles: Tubes for Pneumatic tyre Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres - * ISI MARKED (for Tubes) Yes Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - * Type of tube Class-A * Manufactures name and Trade Name - * Tyre-size Designations 16.9X28 * Tube-size Designations 16.9X28 * Structure of Tyre Reinforced or Extra Load Diagonal or bias ply, Bias-belted, Radial, Reinforced or Extra Load Ply Rating 12 * Speed Category - * Load indicas - * Side Well (mm) 410 * Inner area of Tyers (mm) 270 * Section Width (min)(mm) 414 * Overall Width (max)(mm) 1410 * Section Height (mm) 100 * Nominal Aspect Ratio(mm) 100 * Outer diameter (min)(mm) 1410 Any applicable numeric value Nominal Rim Diameter(mm) 28 Any applicable numeric value Maximum load Rating(%) 82.67 Any applicable numeric value Conformity to AIS-044 Yes * Availability of Type Test Report covering complete test parameters as per YES * 2/3 relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. Test cetificate No. - * Test Report Date - * Name and address of the Lab where test Conducted - * Others Certificate ie ROHS, WHO, GMP etc - * Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Velmurugan Balraj 560017, FOUNDRY AND FORGE DIVISION, HINDUSTAN AERONAUTICS LIMITED, VIMANAPURA, OLD AIRPORT ROAD 2 15
Drinking Water Cooler
Executive Table Executive Table ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Knocked Down To Be Assembled At Consignee Site By The Seller Frame type Free standing * Understructure of table Gable end and modesty panel * Storage provided Both side Both side Keyboard tray Provided Provided Foot rest Not Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Leg Material NO LEGS Teak wood, Carved 1/4 teak wood, Other wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided N.A * DIMENSION Thickness of table top ±2mm 25 25.0 Thickness of gable end and modesty panel ±2mm 19 * Length of table top ±10mm 1800 1800.0 Depth of table ±10mm 750 750.0 Height of table ±10mm 775 * Dimension of leg(mmXmm) ±5mm 60mmX60mm 60mmX60mm STORAGE UNIT Number of Storage unit provided Four storage Four storage Width of storage unit ±10mm 500mm * Depth of storage unit in mm (±10mm) 600 * Height of smallest storage unit ±5mm N.A * Height of medium storage unit ±5mm 175mm * Height of largest storage unit ±5mm N.A * KEYBOARD TRAY Type of keyboard tray Prelaminated particle board keyboard tray * Material of keyboard tray and Right angle L- type supporting bracket Three layer prelaminated particles board(wood product) of grade II type II of IS 12823/Latest * Keyboard adjustablity underdesk keyboard * 2/4 arm fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * Average weight of telescopic channel ±50Gms N.A * Keyboard front width±10mm 600mm * Keyboard depth±10mm 350mm * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm 1mm * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A 5mm, 9mm, 12mm, 15mm, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade As per Buyer's choice * WARRANTY Warrantee period in number of years 1 1 CERTIFICATION Test reports to be furnished to buyer on demand YES * 3/4 Product having BIFMA certification YES * OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * OEM of offered product is ISO 18001:2007 certified YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Singh Khati 242001, ORDNANCE CLOTHING FACTORY MINISTRY OF DEFENCE SHAHJAHANPUR 15 30
Modular Work Stations/Modular Staff Office
COUNTER CHAIR COUNTER CHAIR ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Height Adjustment With Hydraulic With Hydraulic, Without Hydraulic Frame and support made of CHROME PLATED MS TUBES SS 304, SS 202, POWDER COATED MS TUBES, CHROME PLATED MS TUBES Chair Type REVOLVING REVOLVING, NON REVOLVING TYPE OF SEATING SEAT WITH INTEGARTED BACK REST ONLY SEAT, SEAT WITH INTEGARTED BACK REST, SEAT WITH SEPERATE BACKREST Padestal Base Glass Fibre Nylon Glass Fibre Nylon, ABS Plastic, Stainless Steel, Aluminium Die Cast Foot Rest With With, Without Padestal Base Type Without Wheels With minimum 5 Nos ABS/Nylon Twin Caster wheels, Without Wheels 1/3 Arms Without With, Without SEAT MATERIAL CUSHIONED SEAT * Dimensions Shape of Seat Circular, Square, rectang ular, oval * Seat Size (mm x mm) 450mm x 450mm * Height Adjustment in mm (+/- 5 mm) 100 * Padestal Size Diameter in mm (+/- 10 mm) 650 * Seat Height At Lowest Position in mm (+/- 10 mm) 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 * Density of Polyurethane Foam Used in Seat (Kg/Cub M) 40 * Material Material of Fabric of Seat Cover No Fabric * MISC Padestal Base Chrome Plated yes * Colour of Seat Brown * MAX LOAD BEARING CAPACITY IN KG 85 * GSM/Thickness Of Fabric No Fabric * WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Velmurugan Balraj 560017, FOUNDRY AND FORGE DIVISION, HINDUSTAN AERONAUTICS LIMITED, VIMANAPURA, OLD AIRPORT ROAD 3 30
LED Lamps- bulb LED Lamps- Bulb ( 1000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 12Watt/1200 Lumens 12Watt/1200 Lumens Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 3 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * 1/3 Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) LM-80 * LED Make SAMSUNG/Nichia/Lumil ed/Osram * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. RSZ150126508-10 * LED life Certificate Test Report Date 27.10.2015 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number RSZ150126508-10 * LED Lamp Life Certificate date 27.10.2015 * Name of Lab where test conducted FOSHAN NATIONSTAR OPTOELECTRONICS CO., LTD * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. HPLI/TEST/1510097803 * Test Report Date 16/10/2015 * Name of lab where test conducted HPLI * 2/3 Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 praveen kumar 803121, rajgir nalanda pin 803116 1000 15
Online UPS
OEM Ribbon Cartridge OEM Ribbon Cartridge ( 400 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Epson * Ribbon Cartridge Model number EPSON LQ 1310 * Corresponding Part number/code of Ribbon Cartridge LQ-1310-TWIN * Width of Ribbon i Ribbon Cartridges (mm) 12.7 Any applicable numeric value Length of Ribbon in Ribbon Cartridges (meter) 16 Any applicable numeric value Colour of the Ribbon in Ribbon Cartridge BLACK * Type of Printer for which Ribbon Cartridge is suitable Dot Matrix * Printer Model no/nos for which Ribbon Cartridge is suitable LQ-1310-TWIN * 1/2 Character Yield of the Ribbon Cartridge for upto 85% of the total Optical Density (at 10cpi) (Million Character) 80 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhorali 600054, Junior Works Manager Engine Factory, Avadi chennai 400 15
Desktops
Human Resource Outsourcing Service
Human Resource Outsourcing Service
LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated Power 45W 45W 1/7 Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * Warranty for free replacement (in years) 5 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Junctiojn/Soldering Yes * 2/7 point temperature shall not exceed 85 deg.c as per LM 80 report Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED section and driver IP66 * 3/7 section) as per IS:10322 (Part 1):1982 latest Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 100 cm 100 cm MARKING "Manufactures Name and and brand on the Engraved/Embossed * 4/7 aluminium die cast body " Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Ref. Yes * 5/7 IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bal Krishan 208001, Ordnance Equipment Factory, Phool Bagh 60 30
COUNTER CHAIR COUNTER CHAIR ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Height Adjustment With Hydraulic With Hydraulic, Without Hydraulic Frame and support made of SS 202 SS 304, SS 202, POWDER COATED MS TUBES, CHROME PLATED MS TUBES Chair Type REVOLVING REVOLVING, NON REVOLVING TYPE OF SEATING ONLY SEAT ONLY SEAT, SEAT WITH INTEGARTED BACK REST, SEAT WITH SEPERATE BACKREST Padestal Base Stainless Steel Glass Fibre Nylon, ABS Plastic, Stainless Steel, Aluminium Die Cast Foot Rest With With, Without Padestal Base Type Without Wheels With minimum 5 Nos ABS/Nylon Twin Caster wheels, Without Wheels 1/3 Arms Without With, Without SEAT MATERIAL CUSHIONED SEAT * Dimensions Shape of Seat Circular * Seat Size (mm x mm) 355mm x 355mm * Height Adjustment in mm (+/- 5 mm) 100 * Padestal Size Diameter in mm (+/- 10 mm) 350 * Seat Height At Lowest Position in mm (+/- 10 mm) 400 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 30 * Density of Polyurethane Foam Used in Seat (Kg/Cub M) 20 * Material Material of Fabric of Seat Cover No Fabric * MISC Padestal Base Chrome Plated yes * Colour of Seat Red * MAX LOAD BEARING CAPACITY IN KG 80 * GSM/Thickness Of Fabric No Fabric * WARANTEE PERIOD IN NUMBER OF YEARS 2 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Velmurugan Balraj 560017, FOUNDRY AND FORGE DIVISION, HINDUSTAN AERONAUTICS LIMITED, VIMANAPURA, OLD AIRPORT ROAD 15 30
medical stools or chairs Medical Stools Or Chairs ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Material and shape of Stool Material of Back rest NA Any applicable text(s) Material of cushion NA Any applicable text(s) Cushioning in the stool Top Without cushion with Cushion, Without cushion Finish Yes Any applicable text(s) Design of Back rest NA Any applicable text(s) Back rest support Frame Material NA Any applicable text(s) No of Legs in the under structure 4 4 Foot rest With With, Without Shape of stool top Square * Material of Top Mild Steel Mild Steel Covering material of cushion NA * Leg shoe Material Rubber Any applicable text(s) Painting Powder coating Stove enamel, Powder 1/3 coating, Polishing, Others Density of Cushion (Kg/cub metre) NA Any applicable text(s) Type of Stool Fixed Fixed, Revolving Material of Under Structure IRON Any applicable text(s) Back rest Without With, Without Dimensions Adjustable Height false true, false Normal Height (mm) 600 50-1000 Back rest height (mm) NA Any applicable text(s) Min. Height (mm) 600 600 Diameter/Side length of Top (mm) NA Any applicable text(s) Thickness/Size of Under structure Frame (mm) 25 Any applicable text(s) Thickness of cushion (mm) NA Any applicable text(s) Max. height (mm) 600 50-1000 Back rest Thickness (mm) NA Any applicable text(s) Stool Top base Thickness (mm) 18 1.0E-6-100 Over all width/Diameter (mm) 300 Any applicable text(s) Drawing and product code Drawing No. available on web false * Drawing No. NA * Product Code No. Rir-73L * Product Code available on web false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Velmurugan Balraj 560017, FOUNDRY AND FORGE DIVISION, HINDUSTAN AERONAUTICS LIMITED, VIMANAPURA, OLD AIRPORT ROAD 15 30 2/3
buses
industrial vacuum cleaner Industrial Vacuum Cleaner ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values PERFORMANCE Vacuume level 233 60-300 Airflow rate (ltrs/Sec) 100 100 Suction Hose length 1 1-10 Floor Nozzle size 400 50-400 Power Supply 230 + 10 % VAC, Single Phase, 50 +/- 2 % HZ * Rated input power during operation 1.3 * Power Cord Length 10 * FILTER Filter Dust class as per EN 779:2012 Classification G1 * Filter Area(square meter) 6000 * Filter clean operation Manual * MOTOR Number of Motors 2 * 1/4 Power of Each Motors 1300 * RPM 20000 * FEATURES Types of Cleaning operation Wet Heavy Duty Cleaning, Dry Heavy Duty Cleaning, Wet and Dry Duty Cleaning * Provision Pneumatic Tool Running Automatically With Vacuum Yes * Pneumatic tools Running Power 1300 * Provision Power Tool Running Automatically with Vacuum Yes * Trouble free wet and dry pickup without having to stop to change filters dry mode to wet mode Yes * Storage facility and integrated accessories holder for tools Yes * Start and Stop auto switch on/off power tool Yes * Integral auto on-off System for pneumatic and electric tools Yes * GENERAL DETAILS Overall Dimension (LXWXH) 62CMX45CMX115CM * Net Weight 22 * Material Of the Body & Container Stainless Steel * Container Capacity 62 62.0 Material of Flexible Hose Polypropylene * Noise Level 62 * OPERATING ENVIRONMENT Highest operating Temperature 50 * Lowest Temperature Range (Degree celsius) 0 * Usuability under Different weather condition Rainy Weather, High Altitude(4300 mtrs), Desert Condition, NA * ADDITIONAL FEATURES Weather Proof Switches Yes * 2/4 Overload Protection Yes * Spring Loaded Brushes Yes * Other Features Tiltable tank for easy emptying of solids and liquids * WARRANTY Warranty 1 1.0 ACCESSORIES Packing list Hose, dirt tool, wet tool round brush, curved brush * CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC acredited lab to prove confirmity to specification false * Test Report No and Date NA * Name and Address of the Lab NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 2 15
bathing soap Bathing Soap ( 8000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes * BIS Marking false true, false CML Number NA * Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 632541 * Test Report Date 22/02/2016 * Name of the Lab Nirma ltd Ahmedabad * Must declare (Write NA in case of NO against availability of Test Report) NA * Colour and Fragrance Colour Pink * Fragrance Scented * 1/2 Weight Weight of Soap (Gms) 75 Any applicable numeric value Packing Packing Material Paper wrap cartoon Any applicable text(s) Number of Soaps in a Pack (Nos) 120 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramchandra Jagannath Shinde 425203, ORDNANCE FACTORY BHUSAWAL 8000 90
laundry soap Laundry Soap ( 8000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 285:Latest Yes * ISI Marking No Yes, No CML Number NA * Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification No Yes, No Test Report Number NA * Test Report Date NA * Name of the Lab NA * Address of the Lab NA * Type and Fragrance Type Type 1 (Pure Soaps) Type 1 (Pure Soaps), Type 2 (Built Soaps) Grade 1, Type 2 (Built Soaps) Grade 2 Fragrance LEMON * Weight and Packing Weight of Bar/Cake 125 125 1/2 (gms) Number of Bars in a Pack (Nos) 1 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramchandra Jagannath Shinde 425203, ORDNANCE FACTORY BHUSAWAL 8000 90
LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 16 Lakh (s) LED Luminaire (For Road And Street Lights) ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated Power 90W 90W 1/7 Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * Warranty for free replacement (in years) 3 3 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Junctiojn/Soldering Yes * 2/7 point temperature shall not exceed 85 deg.c as per LM 80 report Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +50 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED section and driver IP66 * 3/7 section) as per IS:10322 (Part 1):1982 latest Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the Engraved/Embossed * 4/7 aluminium die cast body " Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Ref. Yes * 5/7 IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 K Chandra Mohan 743144, PO - Ichhapur Nawabganj, North 24 Parganas 500 45
OEM Ribbon Cartridge OEM Ribbon Cartridge ( 2000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand TVSE TVSE Ribbon Cartridge Model number 136 COL DOT MAGIC * Corresponding Part number/code of Ribbon Cartridge 132 COL * Width of Ribbon i Ribbon Cartridges (mm) 13 13 Length of Ribbon in Ribbon Cartridges (meter) 15 15 Colour of the Ribbon in Ribbon Cartridge BLACK * Type of Printer for which Ribbon Cartridge is suitable Dot Matrix * Printer Model no/nos for which Ribbon Cartridge is suitable TVS MSP 245/345/355, EPSON LQ1150/1050 * 1/2 Character Yield of the Ribbon Cartridge for upto 85% of the total Optical Density (at 10cpi) (Million Character) 130000 130000 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 2000 30
Multifunction Machines
LED Luminaire (for Flood Light) LED Luminaire (for Flood Light) ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 150W 140W, 150W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 IP65, IP66, IP67 Mounting brackets (included) Adjustable * Warranty for free replacement (in Years) 2 * ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 Hz with auto cutt off at below 120V * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * Total Harmonics Distortion (in %age) ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥70 * Beam Angle ≥120 * Optic lense materal (UV stabilised) (Write NA for without optic lense supply) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or Yes * 2/7 better Junction temperature < 85 degC * Operating temperature range -10 deg C to +50 deg C * Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients ( Internal) >/=5KV * The luminaire shall be protected against surges and transients of >/=10KV (External) Yes * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant epoxy powder coated Yes * All fastners must be of stainless steel Yes * The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes * Extruded silicon loop gasket shall be provided in the lantern Yes * 3/7 body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 100 cm * Light Source SMD LED Chip as per LM 80/IS16106 * MARKING "Manufactures Name and and brand on the aluminium die cast body Engraved/Embossed * Manufacturer’s name, model number, serial number Yes * Date of manufacture Yes * 4/7 (month-year), and lot number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Yes * 5/7 Report from Central Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report on demand by buyer/consignee Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 200 60
power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 2500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable, IS:9968 (Pt-1&2) for elastomer insulated cable BIS Marked Yes * CM/L No 8158075 * CONSTRUCTIONAL Working voltage Upto 1100V * Type of insulation PVC PVC Type of sheath PVC PVC Sheated Yes Yes, No Outer cover material Non braided Non braided, Braided No. of cores 3 3 Conductor material Copper * Size of the conductor 1.00 sq mm 3 core * Type of conductor Stranded * 1/3 Type of service General * Type of flexible cord Unkinkable * Length of cable in a bundle (meter) 100 * Cable bundle weight (kgs) 2KG * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes * Test report number 8158075 * Test Report Date 26-7-2017 * Name of Lab BIS * Address of the lab MANAK BHAWAN JAIPUR * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kumar Rajesh 502205, The Sr. General Manager Ordnance Factory Medak Yeddumailaram 2500 15
power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 3000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable, IS:9968 (Pt-1&2) for elastomer insulated cable BIS Marked Yes * CM/L No 2858679 * CONSTRUCTIONAL Working voltage Upto 1100V * Type of insulation PVC PVC Type of sheath PVC PVC Sheated Yes Yes, No Outer cover material Non braided Non braided, Braided No. of cores 3 3 Conductor material Copper * Size of the conductor 1.5 SQ.MM * Type of conductor Stranded * 1/3 Type of service General * Type of flexible cord Unkinkable * Length of cable in a bundle (meter) 100METER * Cable bundle weight (kgs) 1.3 * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes * Test report number STI/694/11 * Test Report Date 22/01/2014 * Name of Lab Power Cable Test Laboratory, Polycab Wires Pvt. Ltd. * Address of the lab Plot No. 67-69, 71-72, 105-106, Nurpura Road, Baska Halol, Dist - Panchmahal Halol, Gujarat * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kumar Rajesh 502205, The Sr. General Manager Ordnance Factory Medak Yeddumailaram 3000 15
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 5 Year (s) OEM Cartridge/Consumable ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP * 1/3 Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Sethi 110011, ROOM NO. 32A, 'H' BLOCK DGQA/ADM NIRMAN BHAWAN POST OFFICE NEW DELHI -110011 25 15
Metal Shelving Racks
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Samsung - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number Samsung MLT-D111S Black Toner Cartridge - Corresponding Part number/code MLT-D111S/XIP - Printer Model number/numbers for which Cartridge is suitable SL-M2020, SL-M2021, SL -M2022, SL-M2070, SL- M2071F - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 200 90
cotton towels Cotton Towels ( 850 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification BIS specification No- IS:7056/1989 Latest BIS specification No- IS:7056/1989 Latest, As per QR/specification for Cotton Terry Towel prepared by Northern India Textile Research Association, Sector 23, Raj Nagar, Ghaziabad, UP and approved by MHA vide letter No. - U- II-25/2011-12- Prov- ( CoBRA ) dated 11-02-2013 Specification has been seen and understood Yes * CERTIFICATION BIS Marking Yes Yes, No, Not applicable ( MHA approved specification ) CM/L No and date 79798963 * SIZE Size ( Lenght X Width ) (cm X cm) 150 X 75 150 X 75 1/3 CONSTRUCTION WEAVE Construction/Weave Terry ( as per IS ) Terry ( as per IS ), Huck-a-Back ( as per IS ), Terry as per MHA approved specification COLOUR Colour Any other colour as per buyer's requirements Any other colour as per buyer's requirements TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab true true, false Name of the Lab NABL * Address of The Lab MUMBAI * Test Report No. 5896 * Test Report Date 13-12-2017 * Test Report to be furnished to buyer on demand, if claimed to be available Not applicable * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 850 60
cotton towels Cotton Towels ( 1700 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification BIS specification No- IS:7056/1989 Latest BIS specification No- IS:7056/1989 Latest, As per QR/specification for Cotton Terry Towel prepared by Northern India Textile Research Association, Sector 23, Raj Nagar, Ghaziabad, UP and approved by MHA vide letter No. - U- II-25/2011-12- Prov- ( CoBRA ) dated 11-02-2013 Specification has been seen and understood Yes * CERTIFICATION BIS Marking Not applicable ( MHA approved specification ) Yes, No, Not applicable ( MHA approved specification ) CM/L No and date NA * SIZE Size ( Lenght X Width ) (cm X cm) 60 X 40 60 X 40 1/3 CONSTRUCTION WEAVE Construction/Weave Terry ( as per IS ) Terry ( as per IS ), Huck-a-Back ( as per IS ), Terry as per MHA approved specification COLOUR Colour Any other colour as per buyer's requirements Any other colour as per buyer's requirements TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab true true, false Name of the Lab BTL LAB * Address of The Lab KOLKATA * Test Report No. 589261 * Test Report Date 16-12-2016 * Test Report to be furnished to buyer on demand, if claimed to be available Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Tamrakar N 482009, Vehicle Factory Jabalpur, 1700 60
OEM Cartridge/Consumable Experience with Gov. Required 1 Year (s) OEM Cartridge/Consumable ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Magenta * Ink/Toner/Drum Model number Samsung CLT-M506S Magenta Toner Crtg * Corresponding Part number/code CLT-M506S/XIP * Printer Model number/numbers for which Cartridge is suitable CLP-680ND, CLX-6260F D, CLX-6260FR, CLX-626 0FW, CLX-6260ND * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 KRUSHNAPRASAD SARANGI 700001, 10A, S K BOSE ROAD, KOLKATA - 700001 25 15
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 70 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Canon * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number CRG 328 * Corresponding Part number/code 3500B003AA * Printer Model number/numbers for which Cartridge is suitable L170, MF4720w, MF4820 d, MF4750 * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 * * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 KRUSHNAPRASAD SARANGI 700001, 10A, S K BOSE ROAD, KOLKATA - 700001 70 15