Loading
Loading…
Loading…
2,900 results • Latest
insulation tester Insulation Tester ( 5 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values PERFORMANCE Type Hand Held Hand Held Measurement Range 0.01 M Ohm to 10 G Ohm 0.01 M Ohm to 10 G Ohm Measurement Accuracy 2 2.0 Measurement Resolution 0.01 0.01 Test Voltage 1000 1000.0 Test Current 1 1.0 OTHER MEASUREMENT AC/DC Voltage Measurement (Volt) 600 * AC/DC Voltage Measurement Resolution ( Volts ) 0.1 * AC/DC Voltage Measurement Accuracy (%) 2.0 * FEATURES Pass Fail Function true * Data Logging NA * 1/4 PC interface along with suitable & driven software Not Available * Live Circuit Detection inhibit test terminal voltage >30 V prior to initialization of test * Auto Discharge Time (Second) Less than 0.5 * Any Other Features 1KV Insulation Tester * GENERIC Dimensions ( mm x mm x mm ) 50X100X203 * Weight 549 * SAFETY Safety rating Category III 600 V of IEC 61010 Category III 600 V of IEC 61010, Category III 1000 V of IEC 61010 POWER REQUIREMENT Power Requirements Battery Operated * Type of Battery Non- Rechargeable (Alkaline) * if rechargeable, then chemistry of the battery NA * if Non-rechargeable, then size of the battery cell AA * Number of non- rechargeable the battery/cell 4 * Voltage of rechargeable Battery 1.5 * Capacity of rechargeable battery (milli ampere hour) 1500 * ACCESSORIES Standard Accessories Supplied with the Equipment Insulation Tester, Test Lead Set, Test Probe Set, User Manual, Calibration Certificate * WARRANTY Warranty 1 1, 2, 3 OPERATING CONDITION Minimum Operating Temperature -20 * Maximum Operating Temperature 55 * Operating Humidity (RH) 95 * TEST REPORT DETAILS The equipment supplied with calibration certificate YES * 2/4 conformity to Dry Heat for 16 hrs at a specified maximum temp true * conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest true * conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 hours each at a temp of 40 degree C & 95% RH true * Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification true * Test Report Number and date for the specification test FLUKE/2018/52145632 Dtd. 15.03.2018 * Name and address of the Lab for the specification test FLUKE CORPORATION, USA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manas Kumar Jha 226016, Indira Nagar, Faizabad Road 5 15
Air Conditioner
Ceiling Fan
Vehicle Hiring Service (Long Term)
Vehicle Hiring Service (Long Term)
revolving chair, chairs-office Experience with Gov. Required 5 Year (s) Revolving Chair ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt synchronic * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/13 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest true true, false Seat type sliding fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 3-Position Locking * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/13 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA * Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A 3/13 GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 1125 * Backrest Height ±15mm 800 * Backrest Width ±10mm 440 * Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 2.2 * Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 620 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 70 * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/13 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota NO YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sivakumar Natarajan 600114, DGQA Complex 1 15 Revolving Chair ( 16 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt * Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, false Back type fixed push back, height adjustable 5/13 Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement N.A 2(up & down), N.A Lumber support N.A integrated, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden 6/13 Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover mesh fabric mesh fabric, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 290 gram * 7/13 DIMENSION Overall Chair Height ±15mm 710 * Backrest Height ±15mm 460 * Backrest Width ±10mm 480 * Seat Height ±15 mm 450 420, 360 Thickness of M S Plate Joining the under structure with Seat 2.2 * Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A * WARANTEE Warrantee period in number of years 1-year 1-year, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO 8/13 18001:2007 certified Green guard certification NO YES, DGQA Complex 16 15 Chairs-office ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true * Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Made of Polythene cane Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover knitted with cane knitted with cane, leather foam, leather, polyster, N.A 9/13 Thickness of Plywood used in Backrest IN MM (±1 mm) N.A 12 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material STAINLESS STEEL MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) N.A * Material of Fabric of Seat Cover knitted with cane black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) N.A * Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) N.A 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material chrome mild steel * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) N.A 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 20 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber * DIMENSION Size of Material (mm) 16 gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 830 mm 700 mm, 750 mm, 800 mm, 830 mm, 10/13 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 430 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 400 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 480 400, 430, 380 Backrest Width ±10(mm) 400 mm 350 mm, 480 mm Backrest Height ±10(mm) 450 mm * Arm Length ±5(mm) 300 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 50 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black * Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint NA * CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA * Test reports to be furnished to buyer on demand YES YES, NO 11/13 OEM of offered product is ISO 18001:2007 certified NO YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sivakumar Natarajan 600114, DGQA Complex 8 15
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 3300 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500, 500.0 (or higher) Physical Characteristics Brightness in % 85 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in ml/min 150 - 1/2 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 3 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Naveen Kumar Rallapalli 763002, Hindustan Aeronautics Limited Sukhoi Engine Division, Sunabeda 3300 15
lead acid battery Lead Acid Battery ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992 Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Fibre Reinforced Plastics (FRP), Hard Rubber, Polypropylene Rated Capacity at C20 discharge (AH) 120 120 Warranty (Years) 3 Years 3 Years Battery Condition Charged * CONSTRUCTIONAL Dimensions (L x W x H) As per relevant IS * 1/3 (mm x mm x mm) Specifications Volume of Electrolyte (ml) 14.2 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab Village & Post-Gwalpah ari, Dist.Haryana * Name of the Lab NISE * Test Report No. 20/16/BT/NISE * Test Report Date 19/12/16 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications Not Applicable. * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sivakumar Natarajan 600114, DGQA Complex 2 15
Printer or photo Copier Paper Average Turn Over of Last 3 Years 5 Lakh (s) Printer Or Photo Copier Paper ( 1000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 80-95 Tensile Index MD in Nm/g 40 * Tensile Index CD in Nm/g 25 * Opacity in % 85 * 1/2 Tear Index (Avg) in Nm.m²/g 5 * Smoothness for both sides (Bendtsen) in ml/min 150 * Thickness in µm 95 * Moisture in % 5 * Stiffness MD 2 * Stiffness CD 1.5 * Surface Strength Dennison (Wax Pick) >= 12 A 12 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manoj Rana 246149, Bharat Electronics Ltd. Kotdwara 1000 15
traffic signs - bilinker light Experience with Gov. Required 1 Year (s) Traffic Signs - Bilinker Light ( 900 ) Technical Specifications Specification Specification Name Values Allowed Values Construction Construction Single piece metal (min 3 mm thick) cabinet with thick Black powder coating WITH polycarbonate front glass. Provided with hooks for hanging - Dimension Length (cm) 11 Height (cm) 2 Width (cm) 9 Physical Characteristics Display (Colour Plate) As per user requirement - Front glass shall be heat and shock resistance and should not break if water droplets fall on it while the blinker in use Yes - Auto Flashing feature with variable ON/OFF Yes - Adjustment for reducing intensity of LED Yes - 1/3 Light Sensor to OFF the blinker in day and ON in dark Yes - Single button to activate and deactivate the blinker Yes - Ingress protection IP 65 or better - Operating environment up to 95 R.H at 40 degree C - Battery Details Built in battery/capacity (Maintenance free battery) SMF lead acid/12V/7Ah SMF lead acid/12V/7Ah, SMF lead acid/12V/9Ah Battery charging time (Maximum) (hours) 0 - Battery Back-up time with continuous flashing (hrs) 0 Input Power 230 V +/- 10, 50 Hz AC - Warranty Warranty (Years) 3 3, 5 (or higher) Test Report Details Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab covering all the parameters as per specifications No Yes, No Test Report Number NA - Test Report Date NA - Name of Test Lab NA - Address of the Test Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilip Shankar Kharade 249201, OFFICER COMMANDING 531 SS & TC GREF NEAR RLY STATION RISHIKESH 900 15
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. - Type Stored Pressure Stored Pressure, Gas Cartridge Type Extinguishing Media Carbon Dioxide Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium CO2 Extinguishing Medium CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA - Powder Based Extinguishing Media NA - Clean Agents Based Extinguishing Media NA - Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) NA 1, 2, NA 1/3 Carbon Dioxide Based Fire Extinguisher Capacity (Kg) 4.5 4.5 Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 16 Rechargebale true - Color Coding Red - Fire Extinguisher Suitable for Class -A Fire false - Fire Extinguisher Suitable for Class -B Fire true - Fire Extinguisher Suitable for Class -C Fire true - Fire Extinguisher Suitable for Class -D Fire false - Fire Extinguisher Suitable for electrical Fire true - Performance Operating Temperature (° C) -20° C to + 55° C - Test pressure/Burst Pressurire Extinguisher except CO2 NA - Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) 55 - Discharge Range for Extinguisher (Meters) >=1 for Class-B - Effective Discharge Time for Fire Extinguisher, Min (Seconds) 8 seconds Fire Rating for Class -A Fire Extinguisher NA - Fire Rating for Class -B 13B - 2/3 Fire Extinguisher Certification BIS Marking Yes - CM/L No.* with Validity Period - - Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES - Test Report No - - Test Report Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 25 90
water storage tanks Water Storage Tanks ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes - ISI Marked true true CM/L No 5800014608 - Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank Number of Layers Double Layer Double Layer Capacity Capacity of the Tank (Litres) 300 300 Dimension Dimenstion of Tank as per IS 12701(latest) Yes - Uses Uses Out Door Use Out Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification Yes - Test Report No 25400 - Test Report Date 30.05.2017 - 1/2 Name of the Lab CIPET - Address of the Lab HALDIA - Test Reports to be furnished to the buyer on Demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 50 90
water storage tanks Water Storage Tanks ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 12701 (Latest) Yes - ISI Marked true true, false CM/L No 9917001 - Shape and Construction Shape of the Tank Cylinderical Vertical Tank Cylinderical Vertical Tank, Rectangular Loft Tank Number of Layers Double Layer Single Layer, Double Layer Capacity Capacity of the Tank (Litres) 500 As per GeM Catalogue. Dimension Dimenstion of Tank as per IS 12701(latest) Yes - Uses Uses Out Door Use Out Door Use, In Door Use Test Reports Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification Yes - 1/2 Test Report No IS 12701 - Test Report Date 17-02-2017 - Name of the Lab Sintex-BAPL Limited - Address of the Lab Tehsil Nalagarh, Nalagarh, PIN-174101 - Test Reports to be furnished to the buyer on Demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 100 90
All in one All In One ( 24 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) Intel Core i5-6500 (3.2 GHz, 4 Cores), Intel Core i5-7400 (3.0 GHz, Intel Core i5-7500 (3.4 GHz, Intel Core i5-7600T (2.8 GHz, 4 Cores) Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description Intel HD 620 * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 1000, 500 (or higher) 1/5 Hard disk drive speed (RPM) 7200 * RAM Type of RAM DDR4 * RAM Size (GB) 4 4 RAM Expandability Upto (GB) 32 8, 16, 32, Not- Available Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows * Display Display Size (Inch) 19.5 20, 19.5 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 4 * VGA Port Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * 2/5 ROHS Compliance Yes * Power Maximum Wattage (Watts) 120 * Power Efficiency (%) Minimum 80 * Others Webcam Full HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramakrishnan E 600054, ORDNANCE CLOTHING FACTORY AVADI CHENNAI 24 30
plywood Plywood ( 5059 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSION Dimension of Plywood Board (mm x mm) 2400X1200 2400X1200, 2100X1200, 2100X900, 1800X1200, 1800X900 Thickness of Plywood Board (mm) 4 4 (or higher) GENERIC Grades BWR BWR, MR Types Based on Classification by Appearance AA AA, AB, BB Conformity to Indian Standard IS: 303 Latest - Type of Preservatives Chromated copper and premium wood preservation oil - Preservative Treatment Yes - CONSTRUCTION Number of Ply 3 Ply 3 Ply, 5 Ply, 7 Ply, 9 Ply, 11 Ply CERTIFICATION BIS Licence No 4858891 - ISI Marked true - SELLING UNIT SELLING UNIT SELLING UNIT IS PER SQUARE FOOT. PRICES ARE TO BE GIVEN IN PER SQUARE FOOT SELLING UNIT IS PER SQUARE FOOT. PRICES ARE TO BE GIVEN IN PER SQUARE FOOT 1/2 WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilip Shankar Kharade 249201, OFFICER COMMANDING 531 SS & TC GREF NEAR RLY STATION RISHIKESH 5059 15
Ceramic Tiles
lead acid battery Lead Acid Battery ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991 Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991 Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene Rated Capacity at C20 discharge (AH) 180 200.0, 180, 180.0 Warranty (Years) 3 Years 3 Years Battery Condition Charged * CONSTRUCTIONAL Dimensions (L x W x H) As per relevant IS * 1/3 (mm x mm x mm) Specifications Volume of Electrolyte (ml) AS PER OEM * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab KAMLA NEHRU NAGAR, GHAZIABAD * Name of the Lab NATIONAL TEST HOUSE (NR) * Test Report No. 1112259 * Test Report Date 02/11/2012 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sivakumar Natarajan 600114, DGQA Complex 2 15
Modular Extendable conference Table ( PAC Only ) Modular Extendable Conference Table ( 16 ) ( Under PAC ) Make godrejinterio Model encartamodularconferencetable Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC SELLING UNIT SELLING UNIT IS PER SEAT. SELLER TO OFEER PRICES IN TREMS OF PRICE PER SEAT. WHILE ORDERING, BUYER TO ORDER FOR QUANTITY OF SEATS REQUIRED IN CONFERENCE TABLE. SELLING UNIT IS PER SEAT. SELLER TO OFEER PRICES IN TREMS OF PRICE PER SEAT. WHILE ORDERING, BUYER TO ORDER FOR QUANTITY OF SEATS REQUIRED IN CONFERENCE TABLE. Type of Seating Offered Single Seating Single Seating, Dual Seating Two Long Sides of Table Have Post Form Half Round Profile * Top Fixing With gable end and modesty panel using Mini Fix And Wooden Dowel By Using (Knock Down) System For Interconnecting With gable end and modesty panel using Mini Fix And Wooden Dowel By Using (Knock Down) System For Interconnecting, With 1/4 Gable End And Modesty Panel Using Right Angle Channel 30X30X300 Mm Long For Interconnecting, N.A For Gap/Wrap age N.A * Number of single seater 1 * Number of dual seater 1 * Number of corners for work top 1 1, 2, 3, 4 Mode of Supply of modular table Knocked Down To Be Assembled At Consignee Site By The Seller Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself MATERIAL Material of work top ± 3 mm 25mm Other Wood * Table top plain side Edge banded with PVC tape of 2 mm thick with help of hot melt glue Edge banded with PVC tape of 2 mm thick with help of hot melt glue, CP Teak Wood Lipping Material of Gable end & mosdety panel ±3mm 18mm Other Wood * Buffer Provided NA * DIMENSION Length of Each Seat of Work Top ± 20 mm 675 mm for single AND 1350 mm For dual 675 mm for single AND 1350 mm For dual, 675 mm for single, 1350 mm For dual Depth of Work Top ± 20 mm 600 mm 600 mm, 650 mm, 700 mm, 750 mm, 1220 mm Height of Work Top ± 20 mm 750 mm 750 mm Corners of work top ± 20 mm 750 mm * COLOUR & FINISH Table top finish Laminate in colour with swede finish 0.6-0.8 mm thickness of type S, F or P having index number 3.2.3 conforming to IS:2046/Latest with having balancing laminate of 0.5 mm Laminate in colour with swede finish 0.6-0.8 mm thickness of type S, F or P having index number 3.2.3 conforming to IS:2046/Latest with having balancing laminate of 0.5 mm 2/4 thick on other side thick on other side, Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S, F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side, Teak laminate/ply with polish, Teak laminate/ply with melamine finish, Glass Finish, Membrane Finish Colour of top finish As per buyer's choice * Plain sides of gable end and modesty panel finish Edge banded with 0.8-1.0 mm thick PVC tape with the help of hot glue * WARANTY Warranty period in number of years 1 1, 4, 5 (or higher) CERTIFICATiON Test reports to be furnished to buyer on demand YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Product having BIFMA certification YES YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devashish Chandra 560017, Hindustan Aeronautics Limited Overhaul Division Vimanapura Post Bangalore 16 45
telecommunication cable Telecommunication Cable ( 1000 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Govering Specification for telephone pair cable TEC Specification G/WIR06/02 * Conductor diameter Nominal (Range) (mm) 0.5 0.5 Number of pair (Number) 10 10 Lenght of cable in a bundle (Mtrs) 500 500 CONSTRUCTIONAL Telephone Pair cable used for Telecom data transmission, Intercome, EPBAX, FAX, Closed circuit security System. Yes * Conductor Materail Copper * Insulation PVC * Shelding Yes * Minimum Diameter over insulation (mm) 1 * Overall diameter of 8.50 * 1/3 cable (mm) CERTIFICATIONS Product Conforming to TEC Specification Yes * Distinct Color Coding system As per TEC Specification * Availability of complete and satisfactory type test Report from Central govt/NABL ILAC accredited laboratory as per Govering Specification Yes * Test certificate number DL0358672 * Test report date 08/04/2017 * Name of lab where test conducted Delton India * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 1000 15
telecommunication cable Telecommunication Cable ( 1000 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Govering Specification for telephone pair cable TEC Specification G/WIR06/02 * Conductor diameter Nominal (Range) (mm) 0.5 0.5 Number of pair (Number) 20 20 Lenght of cable in a bundle (Mtrs) 500 500 CONSTRUCTIONAL Telephone Pair cable used for Telecom data transmission, Intercome, EPBAX, FAX, Closed circuit security System. Yes * Conductor Materail Copper * Insulation PVC * Shelding Yes * Minimum Diameter over insulation (mm) 0.8 * Overall diameter of 24 * 1/3 cable (mm) CERTIFICATIONS Product Conforming to TEC Specification Yes * Distinct Color Coding system As per TEC Specification * Availability of complete and satisfactory type test Report from Central govt/NABL ILAC accredited laboratory as per Govering Specification Yes * Test certificate number NC/PIJF-020A * Test report date 20.04.2018 * Name of lab where test conducted In house Lab * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 1000 15
Executive Table
OEM Cartridge/Consumable, OEM Cartridge Consumable OEM Cartridge/Consumable ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 - 1/3 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhorali 600054, Junior Works Manager Engine Factory, Avadi chennai 25 15 OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 36A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CB436AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1522n MFP Printer, HP LaserJet M1522nf MFP Printer, HP LaserJet - 2/3 P1505 Printer, HP LaserJet P1505n Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhorali 600054, Avadi chennai 5 15
revolving chair Revolving Chair ( 14 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back Arm Type Fixed Fixed Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true Back type push back push back, fixed, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * 1/4 backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking upright locking * Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 50 * Density of PU foam 50 * 2/4 used in backrest in KG per Cu Meter (+/- 3) Material of Fabric Back Cover mesh fabric mesh fabric Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics GSM/Thickness of fabric ±5%(Gram/Square meter) N.A * DIMENSION Overall Chair Height ±15mm 1025 * Backrest Height ±15mm 500 * Backrest Width ±10mm 410 * Seat Height ±15 mm 500 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 2 * Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO 3/4 BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 14 15
office suite software - MS Office etc Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Office Suite Software - MS Office Etc ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF OFFICE SUITE SOFTWARE(GOLDEN) Product Type Proprietary Suites open source suites, Proprietary Suites Name of Software OfficeProPlus 2016 SNGL OLP C - Name of the OEM Microsoft - OEM Model/Part No 49936454 - Product Id of OEM 49936454 - Date of Launch of Version 2016 - FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Proprietary Suite microsoft office suite As per GeM Catalogue. Open Source Suite Not Applicable apache open office, calligra suite, libre office, onlyoffice desktop editors, wps office, Not Applicable Type of licensing users based core based, users based, socket based, concurrent based, Open Source No of days Training Provided at Site 0 0, upto 5, 6 to 10, 11 to 20, 21 TO 30 1/5 Number of Years upto which Support is available from OEM/Franchise online 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Word Processor true - Spreadsheet true - Presentation Tool true - Drawings and Diagrams true - Database Access true - One - Click Export to PDF true - Accessibility true - Support for many native languages true - Open XML File Format true - 3rd Party Add -ons true - XML File Filter Tool true - ActiveX Control true - Writing Support true - Advanced path editing tool true - Gradient and pattern tools true - Files and Printing true - Editing and Formatting true - Complex Documents true - Graphics true - Language Tools true - Manage Projects true - Collaboration over Same Platform Suite true - Billing true - Schedule meetings & Events true - Queries true - Forms true - Reports true - Relationships true - Connects with macros Macro Recorder true - 2/5 Advance data manipulation true - User Control by writing rich VBA code true - Compatability with SQL/MySQL Integration true - Built in Spell Checker Grammer & Style true - Dictionary/Theasaurus true - Utilities for manupulating and editing text true - Templates true - Formula Calculation Function true - Graphing Tool true - Pivot Table/Tables true - Micro programming language true - Visual Basic Language true - Slide Transitions true - Equation Editor true - Common Regional languages true - Themes true - Version Information true - Web Apps true - Azure Marketplace Connector true - Power View true - Scanned Images true - Auto Discover true - Cached Exchange Mode Sync Slider true - Exchange Server Support true - Outlook Social Connector true - People Pane true - PRF Files true - HTML Files true - Live Preview true - 3/5 Blogging true - Research Button true - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Processor Speed Required 2.1 ghz or any - Hard Disk Space Required 10 - RAM Size required 2 - Operating Systems Supported WINDOWS - GENERIC PARAMETERS OF OFFICE SUITE SOFTWARE Free Upgradation to Higher Version within support period yes - Valid Licence copy to be provided yes - Software supplied through url link - List of items included in the package paper license copy and activation copy - Number of Devices Supported for Each User License 1 user - No of Softwares sold 100 - Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Appliance installed 25 - Details of Government Department email, phone no Of concerned authority where Appliance installed for above mazgaon dock ltd - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sandeep Badalkumar Kesawalekar 400010, MAZAGON DOCK SHIPBUILDERS LIMITED, MATERIALS DEPARTMENT, DOCKYARD ROAD, MUMBAI - 400010 9 15
dot matrix printers Dot Matrix Printers ( 55 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Number of Pins (Nos.) 24 24 Number of Columns (Nos.) 136 136 Print Speed at Draft Mode at 10 cpi (cps) 260 Print Speed at High Speed Draft Mode at 10 cpi (cps) 347 10250, 1450, 1550, 300, 300.5, 310, 336, 345, 347, 360, 375, 390, 396, 400, 416, 420, 435, 440, 450, 476, 480, 496, 529, 550, 559, 566, 570, 576, 594, 612, 680, 681, 700, 800 Print Speed at NLQ Mode at 10 cpi for 9 pin only (cps) 0 - Print Speed at LQ Mode at 10 cpi for 24 pin only (cps) 83 - Input Data Buffer Capacity (KB) 100 50, 100 Auto share feature Yes - Parallel Port Available - 1/3 USB Available - Network Interface ( LAN ) Not Available - Over all dimensions (Length x Width x Height) (mm) 537X355X199 - Weight (Kgs) 7.8 - Power Supply 230 V AC - Power consumption- max in Print Mode (watts) 24 - Power consumption- max in Standby Mode (watts) 2.1 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Availability of test reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specification Yes - If yes, Test Report Number - - If Yes, Test Report date - - If Yes, Name of Test lab - - If yes, Address of Test Lab - - On Site OEM Warranty (Years) 1 1, 2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sachin Shivaji Bhalerao 422207, HINDUSTAN AERONAUTICS LIMITED AIRCRAFT MANUFACTURING DIVISION OJHAR 55 90
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 90 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both sides (Bendtsen) in ml/min 150 - 1/3 Thickness in µm 95 - Moisture in % 4 - Stiffness MD 2 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar Singh 461122, NH-69 BETUL ROAD ORDNANCE FACTORY ESTATE ORDNANCE FACTORY ITARSI (MP) 500 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 79A Black LaserJet Toner Cartridge - Corresponding Part number/code CF279A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro MFP M26a Printer, HP LaserJet Pro M12a Printer, HP LaserJet Pro M12w Printer, HP LaserJet Pro MFP M26nw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1000 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 100 15
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP Black Contract Original LaserJet Toner Cartridge (HP 93A Black Original LaserJet Toner Cartridge (CZ192A)) - Corresponding Part number/code CZ192AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro M706n Printer, HP LaserJet Pro MFP M435nw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 12000 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 8 15
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro - 1/3 M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prabhu Thillaivasan 620025, HEAVY ALLOY PENETRATOR PROJECT, HAPP POST, TRICHY - 620025 TAMIL NADU 200 15
Printer or photo Copier Paper Printer Or Photo Copier Paper ( 500 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 297 X 420 297 X 420 Size of the Paper A3 A3 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 90 80-95 Tensile Index MD in Nm/g 45 * Tensile Index CD in Nm/g 30 * Opacity in % 90 * Tear Index (Avg) in Nm.m²/g 5.5 * 1/2 Smoothness for both sides (Bendtsen) in ml/min 250 * Thickness in µm 100 * Moisture in % 5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A 12A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Meenakshi Gupta 201010, Site IV, Sahibabad Industrial Area, Sahibabad Ghaziabad-201010 500 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 300 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 * 1/3 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Padmakar Rustum 421502, MACHINE TOOL PROTOTYPE FACTORY ORDNANCE ESTATE, AMBARNATH 300 60
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 45 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 128A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CE320A * Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CM1415fn MFP Printer, HP Color LaserJet CM1415fnw MFP Printer, HP Color LaserJet CP1525n Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & 2000 * 1/2 ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ASHUTOSH TRIPATHI 208004, Ordnance Parachute Factory Napier Road 45 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 442 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CC388AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 * 1/3 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ASHUTOSH TRIPATHI 208004, Ordnance Parachute Factory Napier Road 442 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 45 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Magenta * Ink/Toner/Drum Model number HP 128A Magenta Original LaserJet Toner Cartridge * Corresponding Part number/code CE323A * Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CM1415fn MFP Printer, HP Color LaserJet CM1415fnw MFP Printer, HP Color LaserJet CP1525n Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & 1300 * 1/2 ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ASHUTOSH TRIPATHI 208004, Ordnance Parachute Factory Napier Road 45 30
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 45 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Yellow * Ink/Toner/Drum Model number HP 128A Yellow Original LaserJet Toner Cartridge * Corresponding Part number/code CE322A * Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CM1415fn MFP Printer, HP Color LaserJet CM1415fnw MFP Printer, HP Color LaserJet CP1525n Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & 1300 * 1/2 ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ASHUTOSH TRIPATHI 208004, Ordnance Parachute Factory Napier Road 45 30
Digital Multimeter ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values FEATURES Type Hand Held Hand Held Display (Digits) 3.5 3.5 Measurement Type True RMS True RMS Counts 6000 4000, 6000, 50000, 200000 (or higher) MEASUREMENTS DC Voltage Range 600 600, 1000 DC Voltage Accuracy 0.05 0.005, 0.05, 0.1, 0.5, 1 DC Voltage resolution 0.1 0.001, 0.01, 1, 10, 100 AC Voltage Range 600 600, 1000 AC Voltage Accuracy 0.1 0.08, 1 AC Voltage resolution 0.1 0.001, 100 DC Current Range 3 3, 10 DC Current Accuracy 0.05 0.005, 1.5 1/5 DC Current resolution 0.1 0.001, 100 AC Current Range 3 3, 10 AC Current Accuracy 1 0.5, 1.5 AC Current resolution 0.1 0.001, 100 Resistance Range 50 40, 50, 60, 100, 500 Resistance Accuracy 1 0.08, 1.5, 2, 2.5, 3, 3.5 Resistance resolution 0.1 0.001, 100 Capacitance Range ( Micro farad ) 1 to 100 1 to 100, 1 to 200, .01 to 1000, NA Capacitance Accuracy ( % ) 2.5 1.5, 3.5, 5, NA Capacitance resolution ( nF ) 1 0.001, NA Frequency Range ( KHz ) 50 50, 200, 300, NA Frequency Accuracy ( % ) 0.1 0.1, NA Frequency resolution ( Hz ) 0.1 0.001, NA Temperature Range ( Degree C ) -40 to 400 -40 to 400, 50 to 1000, NA Temperature Accuracy ( % ) 1.5 1.5, NA Temperature resolution ( Degree C ) 1 0.001, NA OTHER FEATURES Continuity test and Diode test Available * Data logging Not Available * If Data Logging Feature is Available, Internal Memory NA * Computer Interface along with software Available * Dimensions ( mm X mm X mm ) NA * Weight 500 * Other Features NA * SAFETY Safety Rating Category II 600 V of IEC 61010. Category II 600 V of IEC 61010., Category II 1000 V of IEC 61010., 2/5 Category III 600 V of IEC 61010., Category III 1000 V of IEC 61010., Category IV 600 V of IEC 61010, Category IV 1000 V of IEC 61010 Safety Certification UL * POWER REQUIREMENTS Power Requirements 230 V +/-10% AC, 50 Hz +/- 3% through Adaptor * if Battery Operated, then Type of Battery Rechargeable * if rechargeable, then chemistry of the battery lithium ion * if Non-rechargeable, then size of the battery cell AAA * number of non- rechargeable the battery/cell 2 * Voltage of rechargeable Battery 0 * capacity of rechargeable battery(milli Ampere Hour) 10 * Suitable charger adaptor provided YES * ACCESSORIES Standard Accessories Supplied with the Equipment NA * WARRANTY Warranty 2 1, 5 OPERATING CONDITION Minimum Operating Temperature 0 * Maximum Operating Condition 60 * Operating Humidity (RH) 90 * TEST REPORT DETAILS The equipment supplied with calibration certificate YES * conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:900 0/part-3/section-5/1977 latest true * 3/5 conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest true * conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 hrs each at a temp of 40 degree C & 95% RH true * Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification true * Test Report Number and date for the specification test 001. 01 JULY 2017 * Name and address of the Lab for the specification test NABL Accredited laB * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 2 60
Digital Storage Oscilloscope
rugged notebook-laptop Rugged Notebook-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Type Regular Regular, Convertible, Detachable Chassis/Casing Magnesium Alloy - PROCESSOR Processor Make Intel Intel Processor Generation 6th 6th, 7th, 8th Processor Intel Core i7 or higher Intel Core i3 or higher, Intel Core i5 or higher, Intel Core i7 or higher, Intel M5, Intel M7 Processor Description 6500 - GRAPHICS Graphics Type Integrated Integrated, Discrete Graphics NA nVIDIA GeForce GTX 950M, Radeon RT 360, NA Graphics Memory (GB) 0 2, 4, 8, 0 (or higher) OPERATING SYSTEM Operating System Windows 10 Professional - MEMORY Type of RAM DDR4 - RAM Speed (MHz) 2133 - RAM Size (GB) 4 1/4 RAM Expandable upto (GB) 16 STORAGE Type of HDD SATA SATA Hard Disk Drive Size (GB) 500 Hard Disk Drive Speed (RPM) 5400 - CONNECTIVITY Wi-fi Connectivity 802.11 ac - Gigabit NIC 10/100/1000 Available - Bluetooth 4.0 or higher - PORTS USB 2.0 (No.) 0 - USB 3.0 or higher (No.) 3 - USB Type C Not-Available - PCMCIA Slot Available - RJ 45 (Number) 1 - VGA Port Available - HDMI Port Available - Serial Port (Number) 2 - Audio in/out Available - ADDITIONAL FEATURE Port Replicator Interface Available - RF Passthrough Not Available - Dedicated GPS Not Available - Mobile Broadband 4G/Lte Not Available - DISPLAY Display Size (cm) 33.782 Display Resolution (Pixel) 1024 x 768 1024 x 768, 1366 x 768, 1920 x 1080, 1920 x 1200 Display Type Touch Non Touch, Touch Minimum Display Brightness (Nits) 1400 - CERTIFICATION ROHS Compliance Yes - Ruggedness Certification to MIL STD 810 G or latest for Drop, Vibration, Water Resistance, Dust Resistance, Altitude, High/Low temperature, Humidity etc Yes - Ruggedness Certificate MILSTD-810G - 2/4 number EMI/EMC Certification to MIL STD 461F or higher Yes - EMC/EMI Certificate number - - Ingress Protection Rating (IP65 or higher) Yes Yes Energy Efficiency Certification Energy Star - BIS Registration Yes - BIS Registration number under CRS of Meity - - OTHER Keyboard Backlit - Optical Drive Available - Battery Backup Time (Hour) - - Weight (With Battery) (Kg) - - TTC TTC showing conformity to the specifications from a Central Government Lab/an ILAC accredited Lab/NABL approved Lab Yes - If Yes, Name of the Lab - - If Yes, Address of the Lab - - If Yes, TTC number & Date - - WARRANTY Battery Warranty (Years) 1 - On Site OEM Warranty (Years) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 1 60 3/4
digital multimeter Digital Multimeter ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values FEATURES Type Hand Held Hand Held Display (Digits) 4.5 4.5 Measurement Type True RMS True RMS Counts 6000 6000 (or higher) MEASUREMENTS DC Voltage Range 1000 1000.0 DC Voltage Accuracy 0.05 0.005, 0.05, 0.1, 0.5, 1 DC Voltage resolution 0.001 0.001 AC Voltage Range 1000 1000.0 AC Voltage Accuracy 0.5 0.08, 1 AC Voltage resolution 0.1 0.001, 0.01, 1, 10, 100 DC Current Range 10 10.0 DC Current Accuracy 0.05 0.005, 1.5 DC Current resolution 0.001 0.001, 100 AC Current Range 10 10.0 AC Current Accuracy 1 0.5, 1.5 AC Current 0.001 0.001, 1/5 resolution 10, 100 Resistance Range 50 50.0 Resistance Accuracy 0.08 0.08, 1.5, 2, 2.5, 3, 3.5 Resistance resolution 0.1 0.1 Capacitance Range ( Micro farad ) .01 to 1000 1 to 100, 1 to 200, .01 to 1000, NA Capacitance Accuracy ( % ) 1.5 1.5 Capacitance resolution ( nF ) 0.01 0.01 Frequency Range ( KHz ) 200 200 Frequency Accuracy ( % ) 0.1 0.1, NA Frequency resolution ( Hz ) 0.01 0.001, 100, NA Temperature Range ( Degree C ) -50 to 1000 -50 to 1000 Temperature Accuracy ( % ) 2 1.5, NA Temperature resolution ( Degree C ) 0.01 0.001, NA OTHER FEATURES Continuity test and Diode test Available - Data logging Not Available - If Data Logging Feature is Available, Internal Memory NA - Computer Interface along with software Not Available - Dimensions ( mm X mm X mm ) 201X98X52 - Weight 355 - Other Features Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V), Built- in thermometer conveniently allows you to take - 2/5 temperature readings without having to carry a separate instrument (87V), Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks, Large digit display with bright, two- level backlight makes the 80- Series V significantly easier to read than older models SAFETY Safety Rating Category IV 600 V of IEC 61010 Category II 600 V of IEC 61010., Category II 1000 V of IEC 61010., Category III 600 V of IEC 61010., Category III 1000 V of IEC 61010., Category IV 600 V of IEC 61010, Category IV 1000 V of IEC 61010 Safety Certification CE, CSA - POWER REQUIREMENTS Power Requirements Battery Operated - if Battery Operated, then Type of Battery Non- Rechargeable (Alkaline) - if rechargeable, then chemistry of the battery NA - if Non-rechargeable, then size of the battery cell 9-V rectangular battery - number of non- rechargeable the battery/cell 1 - Voltage of rechargeable Battery 9 - capacity of rechargeable battery(milli Ampere Hour) 400 - Suitable charger adaptor provided NA - ACCESSORIES Standard Accessories Supplied with the Equipment DIGITAL MULTIMETER, THERMOCOUPLE PROBE, ALLIGATOR CLIP SET, TEST LEAD SET, USER MANUAL, CALIBRATION CERTIFICATE, 3/5 WARRANTY Warranty 5 5.0 OPERATING CONDITION Minimum Operating Temperature -20 - Maximum Operating Condition 55 - Operating Humidity (RH) 90 - TEST REPORT DETAILS The equipment supplied with calibration certificate YES - conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:900 0/part-3/section-5/1977 latest true - conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest true - conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 hrs each at a temp of 40 degree C & 95% RH true - Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification true - Test Report Number and date for the specification test FLUKE/2018/25648512 DTD. 16.03.2018 - Name and address of the Lab for the specification test FLUKE CORPORATION, USA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 2 30 4/5
Notebook Computers-laptop Notebook Computers-laptop ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 8 th 8 th Processor Intel Core i7 8550U (1.8 GHz, 8 MB Cache, 4 cores) Intel Core i7 8550U (1.8 GHz, 4 cores) Graphics Graphics Type Dedicated/Discrete - Graphics Card Description AMD Radeon M530 - Graphics Memory (GB) 2 - Memory Type of RAM DDR 4 - RAM Size (GB) 8 8 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 16 16 RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive SSD SSD Hard Disk Drive Size( GB) 512 512.0 Higher is better Hard Disk Drive Speed null - 1/3 (rpm) Operating System Operating System Windows 10 Professional Windows 10 Professional Ports USB 3.0 or higher (No.) 1 - USB Type C Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display LCD LED Backlit Display Type Non Touch Non Touch Display Size (Inch) 14 14 (or higher) Display Resolution (Pixel) 1920 x 1080 1920 x 1080 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Standard - Trusted Platform Module Enabled No - Weight (With Battery) (Kg) 1.71 - Carry Case Included Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 6 - Warranty Battery Warranty (Year) 1 1 (or higher) On Site OEM Warranty (Year) 3 3 (or higher) 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 2 30
computer workstation Computer Workstation ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Form Factor Desktop Mobile, Desktop, AIO PROCESSOR Processor Make Intel Intel Number of Processors 1 1, 2 (or higher) Processor Generation 7th - Processor Configuration Intel Core i7-7700 (4 Core, 3.6 GHz, 8 MB L3 Cache, 65 Watt) As per GeM Catalogue. CHIPSET Chipset Intel C236 - Number of PCI Slots 1 - Number of PCIe Slots Gen 3 (x 1, x 4, x 8, X16) (Number) 1 - NumbAer of PCIe Slots Gen 3 (x 16) 2 - GRAPHICS Type of Graphics Discrete Discrete, Integrated Graphic Card nVIDIA Quadro P600 2GB As per GeM Catalogue. MEMORY RAM DDR4 DDR4 Operating Frequency 2400 - RAM Type Non ECC - RAM Size (GB) 16 16 1/4 (or higher) RAM Expandibilty (GB) 64 STORAGE Type of Hard Disk Drive - I SATA Size of Hard Disk Drive - I (GB) 1000 No of Hard Disk Drives-I 1 1, 2, 3, 0 (or higher) Type of Hard Disk Drive - II SATA Size of Hard Disk Drive - II (GB) 1000 No of Hard Disk Drive -II 1 1, 0 (or higher) OPERATING SYSTEM Operating System WINDOWS 10 PROFESSIONAL 64 BIT - OS Certifications WINDOWS AND LINUX - APPLICATION & CERTIFICATIONS Safety Certifications FCC B, UL, CE, VCCI, BSMI, CTICK, KCC - ROHS Compliance Yes - TCO Compliance (for Monitors) TCO-07 - Applications Adobe/Atodesk/Catia/E SRI/Intergraph - Applications Certification from OEM manufacturing Workstation Yes - BIS Registration Yes - BIS Registration Number under CRS of Meity - - CONNECTIVITY Networking Interface Integrated Gigabit 10/100/1000 - Wi-Fi Connectivity 802.11 a/b/g/n/ac - PORTS VGA Port 0 - HDMI Port 1 - Display Port 1 - Mini Display Port 0 - USB C with Thunderbolt Not-Available - Number of USB 2 Ports 4 - No. of USB 3.0 Port (No.) 6 - 2/4 DISPLAY Display (antiglare, LED-backlit) Monitor Integrated, Monitor Display Type Non- Touch Touch, Non- Touch Display Size (cm) 60.45 Panel Type IPS - Display Resolution (Full HD or better) (Pixel) 1920X1080 1920x1080 POWER Maximum Power (Watt) 280 - Power Efficiency Minimum 80% - Power Management Unit - - OTHERS Keyboard Standard Keyboard - Mouse Optical Scroll Mouse - Optical Drive DVD/RW - No. of DIMM Slots (No.) 4 - No. of Internal Bays (No.) 2 - No. of External Bays (No.) 2 - Security Trusted Platform Module - Availability of Bundled Softwares System Health monitoring tool with H/W box - On Site OEM Warranty (Year) 3 1, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 4 60
rugged notebook-laptop Rugged Notebook-laptop ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Type Regular Regular Chassis/Casing Magnesium Alloy - PROCESSOR Processor Make Intel Intel Processor Generation 6th 6th Processor Intel Core i7 or higher Intel Core i7 or higher Processor Description 6500 - GRAPHICS Graphics Type Integrated Integrated Graphics NA nVIDIA GeForce GTX 950M, Radeon RT 360, NA Graphics Memory (GB) 0 2, 4, 8, 0 (or higher) OPERATING SYSTEM Operating System Windows 10 Professional - MEMORY Type of RAM DDR4 - RAM Speed (MHz) 2133 - RAM Size (GB) 4 RAM Expandable upto (GB) 16 STORAGE Type of HDD SATA SATA, SSD 1/4 Hard Disk Drive Size (GB) 500 Hard Disk Drive Speed (RPM) 5400 - CONNECTIVITY Wi-fi Connectivity 802.11 ac - Gigabit NIC 10/100/1000 Available - Bluetooth 4.0 or higher - PORTS USB 2.0 (No.) 0 - USB 3.0 or higher (No.) 3 - USB Type C Not-Available - PCMCIA Slot Available - RJ 45 (Number) 1 - VGA Port Available - HDMI Port Available - Serial Port (Number) 2 - Audio in/out Available - ADDITIONAL FEATURE Port Replicator Interface Available - RF Passthrough Not Available - Dedicated GPS Not Available - Mobile Broadband 4G/Lte Not Available - DISPLAY Display Size (cm) 33.782 Display Resolution (Pixel) 1024 x 768 1024 x 768, 1366 x 768, 1920 x 1080, 1920 x 1200 Display Type Touch Non Touch, Touch Minimum Display Brightness (Nits) 1400 - CERTIFICATION ROHS Compliance Yes - Ruggedness Certification to MIL STD 810 G or latest for Drop, Vibration, Water Resistance, Dust Resistance, Altitude, High/Low temperature, Humidity etc Yes - Ruggedness Certificate number MILSTD-810G - EMI/EMC Certification to MIL STD 461F or higher Yes - 2/4 EMC/EMI Certificate number - - Ingress Protection Rating (IP65 or higher) Yes Yes Energy Efficiency Certification Energy Star - BIS Registration Yes - BIS Registration number under CRS of Meity - - OTHER Keyboard Backlit - Optical Drive Available - Battery Backup Time (Hour) - - Weight (With Battery) (Kg) - - TTC TTC showing conformity to the specifications from a Central Government Lab/an ILAC accredited Lab/NABL approved Lab Yes - If Yes, Name of the Lab - - If Yes, Address of the Lab - - If Yes, TTC number & Date - - WARRANTY Battery Warranty (Years) 1 - On Site OEM Warranty (Years) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 3 30
Televisions
Notebook Computers-laptop Notebook Computers-laptop ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 8 th 8 th Processor Intel Core i7 8550U (1.8 GHz, 8 MB Cache, 4 cores) Intel Core i7 8550U (1.8 GHz, 4 cores) Graphics Graphics Type Integrated - Graphics Card Description Intel HD Graphics 620 - Graphics Memory (GB) NA - Memory Type of RAM DDR 4 - RAM Size (GB) 8 4, 8, 16, 32 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 8 8, 32, 64, NA RAM Speed (MHz) 2400 - Storage Type of Hard Disk Drive SATA SATA, SSD, Fusion, PCIe-based onboard SSD Hard Disk Drive Size( GB) 500 128, 256, 512, 500, 1000, 2000 1/3 Higher is better Hard Disk Drive Speed (rpm) 7200 - Operating System Operating System Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra or Latest, DOS Ports USB 3.0 or higher (No.) 1 - USB Type C Not-Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 3 - Display LCD LED Backlit Display Type Non Touch Touch, Non Touch Display Size (Inch) 15.6 Display Resolution (Pixel) 1366 x 768 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 2.2 - Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Removable - 2/3 Battery Back-up (Hours) 4 - Warranty Battery Warranty (Year) 1 1, 3 (or higher) On Site OEM Warranty (Year) 3 1, 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 2 60
Vehicle Hiring Service (Long Term)