Department of Defence Production and Supply Tender Results

Multifunction Machines

Electrical safety devices and accessories (Insulating Mats for Electrical Purposes) Electrical Safety Devices And Accessories (Insulating Mats For Electrical Purposes) ( 270 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Governing Specification Conformity to Indian Standard: IS:15652 latest - ISI Marked Yes - CM/L Number 2519758 - CONSTRUCTIONAL Insulating mats made of Elastomer (a generic term that includes rubbers, latex and elastomeric compounds that may be natural or synthetic or a mixture or a combination of both) for use as floor covering for the protection of workers on ac and dc installations with the system voltages up to 66 kV ac and 240 V dc and as per Cl 5 of IS15652 latest Yes - Class C C Category Category III (Mats Category I (Mats 1/3 resistant to acids, alkali and oil and low temperature) resistant to acid and oil and low temperature), Category II (Mats resistant to alkali and oil and low temperature), Category III (Mats resistant to acids, alkali and oil and low temperature) Colour Blue/Black - Width (in mm) 1000 to 2000 1000 to 2000 Length (in mm) 1000 1000 REPORTS AND CERTIFICATIONS Availability of test reports from Central Government/State Government/NABL/ILAC accredited Lab covering all the declared parameters as per IS Specification Yes - Test reports to be furnished to buyer on demand Yes - Test report number RP-1516-018729 - Test report date 19.08.2015 - Name of the Lab Electrical Research And Development Association - Address of the Lab ERDA, ERDA Road, Makarpura Industrial Estate, Vadodara - 390010 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahesh Chand Bairwa 421502, Ordnance Factory Ambernath Ambernath, Thane 421502 270 15

Human Resource Outsourcing Service

Compatible Ribbon Cartridge

Line Intractive UPS with AVR Experience with Gov. Required 2 Year (s) Line Intractive UPS With AVR ( 22 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.5/84 As per GeM Catalogue. Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 2 Years 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning instructions Yes - 1/4 CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) No Yes, No Inverter out put socket AC out put for printer (not through inverter) Not applicable 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 Yes - 2/4 pt-5/sec-1 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anand Mangalvedhe 500058, Quality Centre Building, DRDL, Kanchanbagh 22 15

Printer

Notebook Computers-laptop

computer workstation Computer Workstation ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Form Factor Desktop Mobile, Desktop, AIO PROCESSOR Processor Make Intel Intel, AMD Number of Processors 2 2 Processor Generation 8th - Processor Configuration Intel Xeon 5118 ( 12 Core, 2.3 GHz, 16.5 MB L3 Cache, 105 Watt) As per GeM Catalogue. CHIPSET Chipset Intel C621 - Number of PCI Slots 1 - Number of PCIe Slots Gen 3 (x 1, x 4, x 8, X16) (Number) 3 - NumbAer of PCIe Slots Gen 3 (x 16) 2 - GRAPHICS Type of Graphics Discrete Discrete, Integrated Graphic Card nVIDIA Quadro P2000 5GB As per GeM Catalogue. MEMORY RAM DDR4 DDR4 Operating Frequency 2666 - RAM Type ECC - RAM Size (GB) 64 64 1/4 RAM Expandibilty (GB) 512 512 STORAGE Type of Hard Disk Drive - I SSD Size of Hard Disk Drive - I (GB) 512 No of Hard Disk Drives-I 1 1, 2, 3, 0 Type of Hard Disk Drive - II SATA Size of Hard Disk Drive - II (GB) 2000 No of Hard Disk Drive -II 1 1, 0 OPERATING SYSTEM Operating System Windows 10 Professional 64 Bit with Media - OS Certifications "Windows/Red Hat Enterprise Linux/Ubuntu Linux " - APPLICATION & CERTIFICATIONS Safety Certifications IEC 60950 -1 - ROHS Compliance Yes - TCO Compliance (for Monitors) TCO-07 - Applications Digital Content Creation (DCC), Electronic Design Automation (EDA), Mechanical Computer Aided Design (MCAD), Mechanical Computer Aided Engineering (MCAE) etc. - Applications Certification from OEM manufacturing Workstation Digital Content Creation (DCC), Mechanical Computer Aided Engineering (MCAE) etc. - BIS Registration Yes - BIS Registration Number under CRS of Meity - - CONNECTIVITY Networking Interface Integrated Gigabit 10/100/1000 - 2/4 Wi-Fi Connectivity NA - PORTS VGA Port 0 - HDMI Port 0 - Display Port 4 - Mini Display Port 0 - USB C with Thunderbolt Not-Available - Number of USB 2 Ports 0 - No. of USB 3.0 Port (No.) 8 - DISPLAY Display (antiglare, LED-backlit) Monitor Integrated, Monitor Display Type Non- Touch Touch, Non- Touch Display Size (cm) 54.61 Panel Type IPS - Display Resolution (Full HD or better) (Pixel) 1920 X1080 POWER Maximum Power (Watt) 950 - Power Efficiency Minimum 80% - Power Management Unit - - OTHERS Keyboard Standard Keyboard - Mouse Optical Scroll Mouse - Optical Drive DVD - No. of DIMM Slots (No.) 12 - No. of Internal Bays (No.) 2 - No. of External Bays (No.) 1 - Security Trusted Platform Module, Data Protection, Local HDD data wipe via BIOS, Chassis lock slot support, Chassis Intrusion Switch, Setup/BIOS Password - Availability of Bundled Softwares Application Optimizer Software - On Site OEM Warranty (Year) 3 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Sabavat Ramakrishna 502205, The Sr. General Manager Ordnance Factory Medak Yeddumailaram 5 15

computer workstation Computer Workstation ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Form Factor Desktop Mobile, Desktop, AIO PROCESSOR Processor Make Intel Intel, AMD Number of Processors 2 2 Processor Generation 7th - Processor Configuration Intel Xeon E5-2650 v4 (12 Core, 2.2 GHz, 30 MB L3 cache, 105 Watt) As per GeM Catalogue. CHIPSET Chipset Intel C612 - Number of PCI Slots 1 - Number of PCIe Slots Gen 3 (x 1, x 4, x 8, X16) (Number) 1 - NumbAer of PCIe Slots Gen 3 (x 16) 3 - GRAPHICS Type of Graphics Discrete Discrete, Integrated Graphic Card nVIDIA Quadro P4000 8GB As per GeM Catalogue. MEMORY RAM DDR4 DDR4 Operating Frequency 2400 - RAM Type ECC - RAM Size (GB) 256 256 1/4 RAM Expandibilty (GB) 1024 1024 STORAGE Type of Hard Disk Drive - I SATA Size of Hard Disk Drive - I (GB) 4000 No of Hard Disk Drives-I 2 1, 2, 3, 0 Type of Hard Disk Drive - II SATA Size of Hard Disk Drive - II (GB) 4000 No of Hard Disk Drive -II 1 1, 0 OPERATING SYSTEM Operating System WINDOWS 10 PROF - OS Certifications WINDOWS, REDHAT, UB UNTU - APPLICATION & CERTIFICATIONS Safety Certifications ENERGY STAR INDIA - ROHS Compliance Yes - TCO Compliance (for Monitors) TCO-07 - Applications ANSYS, AUTOCAD, CAE, Applications Certification from OEM manufacturing Workstation EDA, DCC, MCEA - BIS Registration Yes - BIS Registration Number under CRS of Meity - - CONNECTIVITY Networking Interface Dual Gigabit NIC 10/100/1000 - Wi-Fi Connectivity NA - PORTS VGA Port 0 - HDMI Port 0 - Display Port 0 - Mini Display Port 4 - USB C with Thunderbolt Not-Available - Number of USB 2 Ports 4 - No. of USB 3.0 Port (No.) 6 - DISPLAY Display (antiglare, LED-backlit) Monitor Integrated, Monitor 2/4 Display Type Non- Touch Touch, Non- Touch Display Size (cm) 68.56 Panel Type IPS - Display Resolution (Full HD or better) (Pixel) 1920X1080 POWER Maximum Power (Watt) 130 - Power Efficiency Minimum 80% - Power Management Unit - - OTHERS Keyboard Standard Keyboard - Mouse Optical Scroll Mouse - Optical Drive DVD WRITER - No. of DIMM Slots (No.) 16 - No. of Internal Bays (No.) 4 - No. of External Bays (No.) 1 - Security TPM - Availability of Bundled Softwares DPPO TOOL - On Site OEM Warranty (Year) 3 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sabavat Ramakrishna 502205, The Sr. General Manager Ordnance Factory Medak Yeddumailaram 2 15

surgical gloves Surgical Gloves ( 10000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Type of Surgical Glove Disposable surgical or Gynaecological rubber gloves conforming to IS 13422 (1992)-powder free Disposable surgical or Gynaecological rubber gloves conforming to IS 13422 (1992)-powder free, Surgical Rubber Gloves conforming to IS 4148 (1989) Sterlity Sterlized Sterlized, Non- sterlite Finish of outer surface Rough - Colour Translucent - Colouring Agent No - Use Single Single, Multiple Shelf Life in years 2 - The product should have at least 2/3 rd of the total shelf life available at the time of supply Yes - STANDARDS Conformity to Indian Pharmacopieia for Sterility (if Sterlized) Yes - DIMENSIONS Size (Number) 8 5 ½, 6, 6 ½, 7, 7 ½, 8, 8 ½, 9, 9 ½ Thickness 0.1 0.1, 0.24 1/3 MATERIAL Material Natural Rubber Latex Natural Rubber Latex, Synthetic Rubber Latex, Rubber Cement Lubricant/Material used for surface treatment RUBBER - Powdered true - PH of aqueous extract from rubber 7 - PACKING Packed to maintain sterlity during shipping & storage and permit opening without contamination of the gloves YES YES, NA No. of Gloves in a pack 2 - MARKING ISI Marked YES - CM/L No. 698554 - REPORTS Submission of Test Reports on Form 39 or from Central Govt./NABL/IL AC acredited Lab to prove conformity to the specifications at the time of supply MED/06 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 A Mohan Ram 560037, HAL ARDC IMM MARATHAHALLI POST 10000 15

Plotter Printers

Utility Vehicles

pressure sensitive adhesive plasticized pvc tapes with nonthermosetting adhesive Pressure Sensitive Adhesive Plasticized Pvc Tapes With Nonthermosetting Adhesive ( 22946 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Confirming to IS:7809 (Part 3/section 1) 1986 with latest amendments Yes - ISI Marked Yes Yes BIS License Number 6127458 - Test Report Details Availability of Type Test Report from Central Govt. NABL/ILAC Accredited lab. To prove confirmity to the specification Yes Yes Test report Number MDH-1571-L-612755 - Test report date 3-5-2017 - Name of Lab Sanghi Polymercy LTD - Address of Lab Sanghi nagar hyderabad - Type Type of Adhesive Pressure Sensitive Non- thermosetting type - Type of the material Flame -Retardant - 1/2 Dimension Thickness of the Tape (mm) 0.125 - Internal diameter of the cores on which the tape is rolled (mm) 16 - Width of the Tape (mm) 20 20 Length of Tape on a roll (meter) 10 10 Physical characteristics Colour of the Tape Black - Tape Designation F-PVCp/90/0/Tp - Nature of Backing (Base) material Polyvinylchloride, Plasticized - Application General purpose for electrical insulation - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 22946 15

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 2000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 80 80 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 90 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 30 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both sides (Bendtsen) in ml/min 200 - 1/2 Thickness in µm 96 - Moisture in % 5 - Stiffness MD 3 - Stiffness CD 2 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Subhadip Ghosh 500058, MISHRA DHATU NIGAM LIMITED PO: KANCHANBAGH 2000 20

digital multimeter Digital Multimeter ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values FEATURES Type Hand Held Hand Held, Benchtop Display (Digits) 4.5 3.5, 4.5, 6.5 Measurement Type True RMS Average, True RMS Counts 6000 4000, 6000, 50000, 200000 (or higher) MEASUREMENTS DC Voltage Range 1000 600, 1000 DC Voltage Accuracy 0.1 0.005, 0.05, 0.1, 0.5, 1 DC Voltage resolution 0.1 0.001, 0.01, 1, 10, 100 AC Voltage Range 600 600, 1000 AC Voltage Accuracy 0.1 0.08, 1 AC Voltage resolution 0.1 0.001, 100 DC Current Range 10 3, 10 DC Current Accuracy 0.05 0.005, 1.5 DC Current resolution 0.1 0.001, 100 AC Current Range 10 3, 10 AC Current Accuracy 0.5 0.5, 1.5 1/5 AC Current resolution 0.1 0.001, 100 Resistance Range 100 40, 50, 60, 100, 500 Resistance Accuracy 1 0.08, 1.5, 2, 2.5, 3, 3.5 Resistance resolution 0.1 0.001, 100 Capacitance Range ( Micro farad ) 1 to 200 1 to 100, 1 to 200, .01 to 1000, NA Capacitance Accuracy ( % ) 3.5 1.5, 3.5, 5, NA Capacitance resolution ( nF ) 0.1 0.001, NA Frequency Range ( KHz ) 200 50, 200, 300, NA Frequency Accuracy ( % ) 0.1 0.1, NA Frequency resolution ( Hz ) 0.01 0.001, NA Temperature Range ( Degree C ) NA -40 to 400, 50 to 1000, NA Temperature Accuracy ( % ) NA 1.5, NA Temperature resolution ( Degree C ) NA 0.001, NA OTHER FEATURES Continuity test and Diode test Available - Data logging Not Available - If Data Logging Feature is Available, Internal Memory NA - Computer Interface along with software Available - Dimensions ( mm X mm X mm ) 87X180X47 - Weight 370 - Other Features 46 Segments Analogue Bar; hFE Test; Data/Peak Hold and Relative Mode;30 Ranges for Function Selection, LCD Display with Visible Zone 63x29 mm - SAFETY Safety Rating Category II 1000 V of Category II 600 V of IEC 2/5 IEC 61010. 61010., Category II 1000 V of IEC 61010., Category III 600 V of IEC 61010., Category III 1000 V of IEC 61010., Category IV 600 V of IEC 61010, Category IV 1000 V of IEC 61010 Safety Certification CE, CSA, VDE - POWER REQUIREMENTS Power Requirements Battery Operated - if Battery Operated, then Type of Battery Non- Rechargeable (Alkaline) - if rechargeable, then chemistry of the battery NA - if Non-rechargeable, then size of the battery cell 9-V rectangular battery - number of non- rechargeable the battery/cell 1 - Voltage of rechargeable Battery 9 - capacity of rechargeable battery(milli Ampere Hour) 1000 - Suitable charger adaptor provided NA - ACCESSORIES Standard Accessories Supplied with the Equipment Test leads, battery and user manual - WARRANTY Warranty 3 1, 5 OPERATING CONDITION Minimum Operating Temperature 0 - Maximum Operating Condition 50 - Operating Humidity (RH) 80 - TEST REPORT DETAILS The equipment supplied with calibration certificate YES - conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:900 0/part-3/section-5/1977 latest true - 3/5 conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest true - conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 hrs each at a temp of 40 degree C & 95% RH true - Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification true - Test Report Number and date for the specification test PMR-GUR140677 05-04-2017 - Name and address of the Lab for the specification test Good Will Instrument Co., Ltd No. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City 23678, Taiwan R.O.C. - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Padmakar Rustum 421502, MACHINE TOOL PROTOTYPE FACTORY ORDNANCE ESTATE, AMBARNATH 12 30

Drinking Water Cooler Drinking Water Cooler ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/ENERGY TYPE Storage - Cooling Capacity Litres/Hour 40 Liters/hour 40 Liters/hour Storage Capacity 40 40.0 Maximum Energy Consumption (Watt) 575 Watt for 40 ltr/hr cooling cap. - Power Factor 0.85 - CERTIFICATION Conformity to Indian standard IS: 1475 latest - ISI MARKED Yes - Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true - Specification Specification Name Values Allowed Values GENERIC Eco-Friendly (Non CFC Refrigerant) Yes - Water Tank sheet material and thickness Stainless Steel (Grade AISI 304), thickness > - 1/2 =0.8 mm Water Tank cover and lid bottom Sheet material Al. sheet - Water Tank cover and lid bottom Sheet Thickness 1.5 - Cooler Cabinet sheet material Stainless Steel (Grade AISI 304) - Cooler Cabinet sheet thickness 1.2 - Warranty on Machine 1 1.0 Higher is better Warranty on Compressor 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Tirthbasi Barik 700028, Ordnance Factory Dumdum, Jessore Road, Kolkata 10 20

telephone instrument single push button Telephone Instrument Single Push Button ( 148 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Connecting Cord Length with each instrument (mtrs) 3 - Colour black/grey - Hands free two way speaker phone true Mounting position both desk and wall mounting - Connecting Jack RJ 11 - Material High impact resistant polymer - Alpha Numeric Keyboard Yes - Weight (gms) 240 - Alarm facility true - DIALLING/RINGING FEATURES Mute true No of Ring volume setting 4 - Redial facility true - Caller ID true No of selectable ring melody tone 10 - 1/3 Flash true - Ringing LED indication true - Pause/Hold true - Tone/pulse switchable Yes - MEMORY No of Fast Dialing Keys 10 - No of Incoming call Memory 30 - No of outgoing call memory 30 - No.of Memory for redialing 10 - DISPLAY DETAILS Display With With, Without No.of digits in display 16 CERTIFICATE Availability of the Test Report from TEC Yes - TEC approval Yes - TEC certificate No(not a part of biddable parameter) - - TEC certificate Date(not a part of biddable parameter) - - Validity of TEC cerficate(not a part of biddable parameter) - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raj Kishore 600054, JOINT GENERAL MANAGER, GS & TOOLS SECTION, HEAVY VEHICLES FACTORY, AVADI 148 30

Plotter Printers Plotter Printers ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type Multifunction Wideformat Printer Multifunction Wideformat Printer Printing Technology Inkjet Inkjet Type of Printing Colour Colour Size 44” (111.76cm) – A3 44” (111.76cm) – A3, A0-A4 Printing Speed (Prints Per Minute) 1A0 As per GeM Catalogue. Printing Resolution (Dpi) 2400 x 1200 2400 x 1200 Print Applications Cad & GIS Printing - Memory (MB) 2048 2048 Scan Speed @minimum 200ppi (mm/sec) 48mm - Scanning Resolution (Dpi) 600 - Hard Disk (GB) 500 500 Interface Ethernet 10/100/1000 - USB Port Yes - Wi-Fi Connectivity Available - Wi-Fi Type Wireless(802.11.b/g/n) - 1/3 Media Type Plain Paper, Heavy weight Coated, Glossy Media - Media Weight Handling Range (GSM) 350 - Ink colour (Minimum) 5 - Roll Handling Capacity (No.) 2 - Size of Rolls to be handled ( Width X OD of roll) 44Inch - Manual cut Sheet Feed Yes - Embedded Post Script Not-Available - Preloaded Softwares like Scan to file, Print to file etc. Available - Power Consumption in Sleep Mode (Watt) 3.6 - Power Consumption in Print Mode (Watt) 105 - BIS Registration under CRS of Meity Exempted - If Yes, BIS Registration number - - TTC covering all the parameters from a Central Govt Lab/an ILAC accredited Lab NABL approved Lab No - TTC number & Date - - If Yes, Name of the Lab - - If yes, address of the lab - - On site OEM Warranty (Year) 1 3, 2, 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nishith Dwivedi 441906, EO SECTION, ORDNANCE FACTORY BHANDARA 1 30

Domestic Water Heater-geyser

Multifunction Machines

Prefab Hut/House of size 4.88 M X 9.76 M - As per GeM Drawing Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Prefab Hut/House Of Size 4.88 M X 9.76 M - As Per GeM Drawing ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Prefab HUT/House With Verandah Conforming to GeM DRG. NO.111 (VERSION-2015) Without Verandah Conforming to GeM DRG. NO.110 (VERSION-2015), With Verandah Conforming to GeM DRG. NO.111 (VERSION-2015) Type of Roof of Prefab HUT/House Roof of corrugated prepainted galvanised steel sheet Roof of corrugated galvanised steel sheet, Roof of corrugated prepainted galvanised steel sheet Pre-fabricated Huts shall be manufactured by using Double skin insulated flat cement sheet board (asbestos fibre) panels for wall and CGI sheet roof Double skin insulated flat cement sheet board (asbestos fibre) panels for wall and CGI sheet roof Pre-fabricated huts having 2 doors - 4 windows - 3 fabricated steel trusses and false ceiling. - Scope of supply (Offer Price to include all cost Supply, Installation, Testing and Commissioning of Supply, Testing and Commissioning of 1/10 components) Hut/House Hut/House Transpotations Freight charges Offer Prices are on Free Delivery at Consignee site basis. Offer Prices are on Free Delivery at Consignee site basis. Approval of Advance sample before Bulk Supply After award of contract, Seller shall have to get Advance sample approved from Buyer before manufacturing starting Bulk supplies. Buyer shall approve provide list of modifications required within 10 days of offer of advance sample. If there is delay in approval of advance sample from Buyer side, the delivery period shall be regularized for the period of delay in sample approval. After award of contract, the delivery period shall be regularized for the period of delay in sample approval., No Advance Sample Foundation for Prefab Hut Building of Foundation at site shall be the responsibility of the Consignee and the Seller shall Install Erect and Commission the structure on the foundation constructed upto plinth level by the Consignee. Building of Foundation at site shall be the responsibility of the Consignee and the Seller shall Install Erect and Commission the structure on the foundation constructed upto plinth level by the Consignee. Time Period for Completion of Erection work at site by Seller Within 60 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work Within 45 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work, Within 60 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work Payment Terms Bill/invoice to be submitted in two parts by seller (80% and 20%). Payment for initial 80% to be made within ten (10) days of receipt of goods by consignee. Bill for balance 20% to be Bill/invoice to be submitted in two parts by seller (80% and 20%). Payment for initial 80% to be made within ten (10) days of receipt of goods by consignee. Bill for balance 20% to be 2/10 raised by seller after completion of installation commissioning, and to be released by Buyer with in ten (10) days of issue of consignee receipt-cum- acceptance certificate after Successful installation Commissioning raised by seller after completion of installation commissioning, and to be released by Buyer with in ten (10) days of issue of consignee receipt-cum- acceptance certificate after Successful installation Commissioning Suitability structural stability completness of structures, the structure is intended for use in In wind condition of 55m/s, in Seismic zone V and ambient temperature of 0 degree C to 50 degree C. Huts should be structurally stable and suitable to meet severity of these climatic condition. In wind condition of 55m/s, in Seismic zone V and ambient temperature of 0 degree C to 50 degree C. Huts should be structurally stable and suitable to meet severity of these climatic condition. Type of glass fitted on windows/Ventilators Pin head type, Plain Pin head type, Plain DESIGN/MATERIAL OF WALL PANELS Design of wall panel As per GeM DRG. NO.121 & 123(VERSION-2015) - Wall made in sandwich panel system using 2 Numbers 10 mm thick cement flat sheets/boards (Asbestos free) as skins conforming to IS 14276 Latest as amended uptodate, Category 3 Type B of IS 14862:2000 latest as amended up to date IS 14276 Latest as amended uptodate, Category 3 Type B of IS 14862:2000 latest as amended up to date Sandwich material - 27 mm gap in between wall skins to be filled with 27mm thick expanded polystyrene core having bulk density of 15 Kg/Cum conforming to IS 4671:1984 type I (Latest) - Panel Strengthened On all four sides By 'W' shaped pre- profiled steel section made from 0.63 GI steel sheet/coil - Cement sheet and expanded polystyrene core to be bonded together using bonding material PVA (polyvinyl acetate) based conforming to IS 4835/Latest, uniformly & fully applied on both sides of the expanded polystyrene cores to ensure proper bonding of the panels. No - 3/10 patching of adhesive will be accepted 'U' shaped ground track size (panels to be inserted one by one) 52.5mm X 35mm X 1.25mm made from GI steel sheet/coil - Bottom track to be fixed To the concrete platform at plinth level by suitable fastners screwed into PVC expandable Screw cap - Interlocking of wall panel(lengthwise) using cold-formed rectangular hollow steel section of size 50mm X 25mm X 1.25mm - Wall corners to be concealed With corner angle of 125mm X 125mm X 1.25mm made from GI steel sheet/Coil - Top of walls to be concealed With 'U' shaped top track of size 52.5mm X 35mm X 1.25mm made from GI steel sheet coil - Sellers are free to adopt higher sizes/reinforcement For better fitment or mating of components or for improved stability - FALSE CEILING Design of false ceiling As per GeM DRG. NO.127(VERSION-2015) - False ceiling of Size 610mm X 1220mm made of One number cement flat board (6mm thick-Asbestos free) bonded with expanded polystyrene core (32mm thick) having bulk density of 15Kg/Cum conforming to IS 4671/Latest Cement Flat Board conforming to IS 12476/Latest, Category 3 type B of IS 14862/Latest IS 12476/Latest, Category 3 type B of IS 14862/Latest Roof Cement sheet and expanded polystyrene core to be bonded together using bonding material PVA (polyvinyl acetate) based conforming to IS 4835/Latest, uniformly & fully applied on both sides of the expanded polystyrene cores to ensure proper bonding of the panels. No - 4/10 patching of adhesive will be accepted False ceiling panels to be placed on suspended grid frame of sides 610mm X 1220mm made from GI "L" & "T" sections of 0.63mm conforming to IS 277/Latest having min. GSM of 120gms - False ceiling grid to be suspended from the roof frame work with the help of galvanised wire of dia (minimum) 3 mm - Finished clear Height of false ceiling 2600 mm - Waterproofness of false ceiling panels To be properly packed with polythene sheets - ROOF & ROOF FRAME WORK Design of roof As per GeM DRG. NO.119(VERSION-2015) - Wall height at eaves and central gable 2750mm at eaves and 3360mm at central gable - Roof to be done with Galvanised corrugated sheets of 0.63mm thickness conforming to IS 277/Latest having min. 275gsm galvanising, Corrugated prepainted galvanised steel sheets and prepainted galvanised steel sheet ridge cover with thickness of BMT 0.63mm conforming to IS 14246/Latest. Top coat of sheet shall be PVDE/Sillicon modified Polyester having thickness of 20 micron (Min) and Back coat shall be of Alkaloid epoxy or polyester having thickness of 7 micron(Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for transport. The durability of paint coating shall correspond to class 1 as per table -1 of IS :14246:2013. (Colour Galvanised corrugated sheets of 0.63mm thickness conforming to IS 277/Latest having min. 275gsm galvanising, Corrugated prepainted galvanised steel sheets and prepainted galvanised steel sheet ridge cover with thickness of BMT 0.63mm conforming to IS 14246/Latest. Top coat of sheet shall be PVDE/Sillicon modified Polyester having thickness of 20 micron (Min) and Back coat shall be of Alkaloid epoxy or polyester having thickness of 7 micron(Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for transport. The durability of paint coating shall correspond to class 1 as per table -1 of IS 5/10 shade of exterior finish shall be Olive Green of colour code RAL6028.The Seller shall furnish manufacture's test certificate indicating material of coating and suitablity of exterior application. :14246:2013. (Colour shade of exterior finish shall be Olive Green of colour code RAL6028.The Seller shall furnish manufacture's test certificate indicating material of coating and suitablity of exterior application. Roof to be laid over Frame work of trusses - columns and purlins fixed using suitable fasteners like 'J' hooks with bitumen washers and nuts/bolts. - Size of Ridge cover to be fixed on top junction of roof of same materail as Roof 225 X 225 X 0.63 mm - Roof slope 1:4(approx) - Purlin to be provided on the roof Of size 66 X 33 X 2.9mm at the eaves and at gable roof extension(out side the structure) - Roof projection in case of no verandah(in front) Min. 400mm from the eaves wall and 300mm from gable walls - Roof projection As per GeM DRG. NO.109 & 119(VERSION-2015) - Purlin provided on the trusses At a max. pitch of 1000 mm or less and are fixed and flushed with the top level of trusses with the help of 5mm thick MS end plates and 10mm nuts/bolts - Column to be welded With 5mm thick MS end plate and to be fixed to the foundation bolts through this plate - Trusses/purlins to be fixed Using 5mm thick MS end plates and 10 mm nuts and bolts - Trusses (supported on truss column) provided at a distance of 2440 mm - Trusses and Purlin to be made of Rectangular hollow sections of size 66 X 33 - 6/10 X 2.9 mm conforming to IS 4923/Latest duly ISI marked Truss columns to be made of Rectangular hollow steel sections of size 96 X 48 X 3.2mm conforming to IS 4923/Latest duly ISI marked - Roof structural frame work As per GeM DRG. NO.119-120a-120b & 121(VERSION-2015) - VERANDAH & DOORS Width of verandah 1525 mm 1525 mm, No verandah Clear height of verandah 2280 mm - Verandah roof to be made of GI (continuous provided along the roof of the structure) - Purlin provided to verandah structure To be made of rectangular hollow steel sections of size 66x33x2.9mm and are fixed and flushed with the top level of the truss extension member with the help of 5mm thick MS end plates and 10mm nut/bolts. - Verandah columns to be made of rectangular hollow steel sections of size 66x33x2.9mm fixed with help of 5mm thick MS end plates and 10mm nuts/bolts at top level and at leveled base by using 5mm thick MS end plates and 4nos. 12mm dia-305mm long foundation bolts. - Door frame to be made from Pressed steel four sided frame using CR steel of size 75x45x1.5mm thickness confmg. to IS 513/latest - Door Hinges 4nos. 100mm MS hinges welded on to the frame - Door shutter made of 30 mm thick flush door confmg. to IS - 7/10 2202(part-1)/latest Door shutter to be fixed with Door frame with 4nos. MS oxidized hinges of 100mm length - Door aldrops To be provided 2nos. MS oxidized of 300mm length - Door tower bolts MS oxidized of size 200mm at top and 100mm at bottom on each shutter - Door handles 2nos. 150mm long handles - WINDOWS & VENTILATORS Windows As per GeM DRG. NO.125(VERSION-2015) - Ventilators As per GeM DRG. NO.126(VERSION-2015) - Frame material of windows/ventilators Made from pressed steel using CR steel of size 75 X 45 X 1.5mm (thickness) conforming to IS 513/Latest - Hinges for windows 6 Nos. 75mm MS butt hinges welded on to the frame - Hinges for ventilators 2 Nos. 75mm MS butt hinges welded on to the frame - Grills for Windows/Ventilators Made from MS square bar of 8mm having equal spacing of 125mm - Shutter material for windows/ventilators Made out of steel rectangular hollow box profile of 1.25mm thick as per drawing, Fabricated type Made out of steel rectangular hollow box profile of 1.25mm thick as per drawing, Fabricated type Each window shutter consist of MS oxidized handle of 150mm - 2 Nos. MS oxidized tower bulls of 100mm and 1 No. window stay. - Each ventilator shutter(Internal) consist of 1 No. stay hook - Glass sheet for windows/ventilators Of 4mm thickness to be fixed using glass putty - ELECTRICAL WIRING & Electrical To be provided ISI mark - 8/10 FITMENTS points/sockets/fan regulators/gang way boxes as per table in annexure B Main switch board Comprising of SP/DP MCBs to be supplied in addition - cables and PVC conduit Adequate quantity to be provided - Electrical installation/co mpleteness Seller is fully responsible for wiring etc. (except light fittings) - Fan regulator Conforming to IS 11037/Latest - COLOUR & FINISH Corrugated GI sheets and ridge cover Confmg. to IS 277/Latest and have a min. galvanizing coating of 275gsm - Other GI profiles Confmg. to IS 277/Latest and have a min. galvanizing coating of 120gsm - MS steel members To be supplied with one coat of red oxide primer coating - Internal wall panels To be one coat of cement primer and two coats of white oil bound distemper - External wall panels To be one coat of cement primer and two coats of enamel paint - Colour/Shade of paint As per buyer's choice - Primers to be used As per buyer's choice - Paints to be used As per buyer's choice - WARRANTY Warranty period in number of years 2 1, 2, 3 (or higher) CERTIFICATION Test reports to be furnished to buyer's on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dilip Shankar Kharade 249201, OFFICER COMMANDING 531 SS & TC GREF NEAR RLY STATION 1 15 9/10 RISHIKESH

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 1960 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 80 80 Quantity Number of Sheets per Ream 500.0 500 Physical Characteristics Brightness in % 88.0 Tensile Index MD in Nm/g 45.0 - Tensile Index CD in Nm/g 35.0 - Opacity in % 92.0 - Tear Index (Avg) in Nm.m²/g 5.5 - Smoothness for both sides (Bendtsen) in ml/min 250.0 - 1/2 Thickness in µm 105.0 - Moisture in % 4.5 - Stiffness MD 3.0 - Stiffness CD 2.0 - Surface Strength Dennison (Wax Pick) >= 12 A 13A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ARUN KUMAR 743144, General Manager Rifle Factory Ishapore Ghoshpara Road, Nawabganj, Ichhapur 1960 30

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Raghuvesh Kumar 482011, GUN CARRIAGE FACTORY JABALPUR GOVT. OF INDIA MINISTRY OF DEFENCE 50 60

power cable for direct burial xlpe ugac cable Power Cable For Direct Burial Xlpe Ugac Cable ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of Buying Through bidding only - Size of Cable (in Sq.mm) 10.0 10.0 Number of cores (nos) 4 4 Cable Type Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 Cross linked polyethylene and XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 BIS marked yes - BIS certificate number 8159582 - Armouring Galvanised steel Strip armoured Galvanised steel Strip armoured Armouring Type single wire or strip armouring single wire or strip armouring, Double wire or strip armouring shape of conductor Stranded Solid, Stranded, Strande 1/3 d and Shaped CONSTRUCTIONAL Number of armouring strip/wire for each size of cable 4.0 x 0.08 - size of armouring strip/wire for each size of cable 4.0 x 0.8 - Material of conductor Aluminium EC Grade - Weight of finished cable per meter na - In addition to marking requirements as per relevant specification, sequential marking for length, Size of the cable, Type of the cable and Drum Number shall be embossed on every metre of the cable yes - standard cable length on a drum 500 meter for cable size up to and including 185 sqmm. - Part length which can be supplied by seller (meter) 100 - cable to be supplied on wooden drums conforming to IS: 10418/82 with latest amendments. yes - Quantity supplied shall not be more than the ordered quantity. yes - CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laoratory to prove conformity to the specification for minimum and maximum ratings. yes - Type Test Certificate No. 8159582 - Type Test Certificate date 24.09.2012 - Name of Lab BUREAU OF INDIAN STANDARD - Address of Lab Manak bhawan, 9 bahadur shah zafar - 2/3 marg, New Delhi 110003 Test Report to be furnished to the buyer on demand yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hemant Singh Khati 242001, ORDNANCE CLOTHING FACTORY MINISTRY OF DEFENCE SHAHJAHANPUR 1000 30

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 2000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen Colour Temperature (K) 6500 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without - Light Source COB LED Chip - LED Make 18 WATT - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde (CRI) >/= 80 - 1/3 Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date 16102 - Certificare for Luminaire photometric data as per LM79 Yes - Certificate No and Date of Luminaire 2012 - 2/3 photometric data as per LM 79 report Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Bedi 411003, Ammunition Factory Khadki, Pune 2000 30

automotive chassis fitted with engine Experience with Gov. Required 5 Year (s) Automotive Chassis Fitted With Engine ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Engine Capacity (cc) 3783 - Chassis Model No. - - Category of Vehicle for which Chassis to be used Medium Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chassis Chassis with facecowl Chassis with facecowl, Chassis without facecowl Body Style - - Chassis with Built up Cabin true Type of Fuel Diesel Diesel Vehicle Emission Complaince BS IV BS IV Chassis Transmission System Manual Automatic, Manual Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe 1/4 rcharged, Turbocharged Intercooled No. of Cylinder in Engine (Nos) 4 As per GeM Catalogue. Ground Clearance (mm) 217 217.0 Wheel Base (mm) 3800 3800.0 Kerb Weight (Kg) 3040 Gross Vehicle Weight (Kg) 9600 9600.0 Type of Steering Power Power No of Axle (Nos) 2 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Axle Configuration ( No of Outside Tyre x No of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - No. of Speed Forward Gears (Nos) 6 3, 7 ABS Fitted false Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - CERTIFICATION Chassis Certification ARAI/VRDE/ICAT No. - - CONSTRUCTION Design of Chassis Full Frame chassis - Body Options Cutaomize-able Customise-able, Fixed Side Deck Fuel Tank Capacity (Ltrs) 160 - Length of Chassis (mm) 6805 6805 Width of Chassis (mm) 2170 2170 Height of Chassis (mm) 2390 2390 Type of Vehicle Tyre Bias Tube, Tubeless, Radial, Bi as Size Of Front Tyres - - Size Of Rear Tyres - - Size of Wheel - - 2/4 Speed Governers true - Side View Mirror true - Standard Sparewheel and Tool Kit Yes - Fog Lights false - PERFORMANCE Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 8.37 - Speed, Max (Km/Hr) 80 - Turning Radius (mm) 6750 Warranty Period inclusive of warranty of Battery (Month) 12 12, 24, 36, 48, 60 Battery Warranty (Month) yes yes Warranty Distance (Km) yes - No. Of Free Service (Nos) 3 - Low Fuel warning Light true - Transportation Charge in Rupees Per Km (Rs/Km) 16.2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Nagendra Pratap Singh N 412101, ORDNANCE FACTORY DEHU ROAD 2 15

lead acid battery Lead Acid Battery ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container ABS ABS Rated Capacity at C20 discharge (AH) 65 65 Warranty (Years) 2 Years 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 4000 - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery 6 Cells for 12 Volt - 1/3 (No.) battery CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab KOLKATA - Name of the Lab EXIDE INDUSTRIES - Test Report No. 2 - Test Report Date 10-04-2018 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashwat Dwivedi 227412, Ordnance Factory Project Korwa, Amethi 10 21

automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Special use Tyre: mixed used Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres With Tube With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles-Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles-Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre 1/3 ISI MARKED (for Tyres) Yes Yes CM/L No and validity date)(for Tyres - - ISI MARKED (for Tubes) Yes Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube Class-A - Manufactures name and Trade Name - - Tyre-size Designations 215/75-R-15 - Tube-size Designations 215/75-R-15 - Structure of Tyre Radial Radial Ply Rating 14 - Speed Category - - Load indicas - - Side Well (mm) 21.5 - Inner area of Tyers (mm) 21.5 - Section Width (min)(mm) 75 - Overall Width (max)(mm) 15 - Section Height (mm) 75 - Nominal Aspect Ratio(mm) 15 - Outer diameter (min)(mm) 215 Nominal Rim Diameter(mm) 75 Maximum load Rating(%) 100 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. LAB. YES - Test cetificate No. - - 2/3 Test Report Date - - Name and address of the Lab where test Conducted - - Others Certificate ie ROHS, WHO, GMP etc - - Warranty Time 1 1.0, 2.0, 3.0 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashish Varma 208008, HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION CHAKERI 15 30

LED Lamps- bulb LED Lamps- Bulb ( 4000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 9Watt/900 lumens 9Watt/900 lumens Colour Temperature (K) 6500 6500 Type of Lamp CAP B22d B22d Warranty for free replacement (Years) 2 Years 2 Years Conformity to Indian Standard IS:16102 part I and Part II latest - FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 - LED Chip Efficacy (Lm/W) >/=130 - Colour Rendering Index(CRI) >/=80 - Beam Angle (Degree) >/=120 - Power Factor >/=0.9 - Total Harmonics (%) </=15 - Driver Efficiency (%) >/=85 - LED chip Wattage (Watt) </=1 - Surge Voltage 2.5 - 1/4 withstand (KV) Operating Voltage range (Volts) <100 Volt and >300 Volt - Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt - Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 - CONSTRUCTIONAL Light Source (as per LM80 orIS16106) LED CHIP - LED Make PHILIPS - Light Source (as per LM80/IS16106) SMD LED Chip - Lamp Shell material Polycarbonate - Ingress Protection in IP >/=20 - TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes - LED life test Certificate No. ELD2920142016 - LED life Certificate Test Report Date 29/10/2016 - LED lamp life certificate for 6000 hrs Yes - LED Lamp certificate Number R - 87000019 - LED Lamp Life Certificate date 23/06/2017 - Name of Lab where test conducted ALPHA TEST HOUSE PHILIPS IN HOUS TESTING (PHILIPS NABL LAB) - EMC Test Yes - Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes - Test certificate No. R - 87000019 - Test Report Date 23/06/2017 - Name of lab where test conducted Bureau of Indian Standards - Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes - * Bold specifications are the golden parameters. 2/4 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Arpit Chugh 201206, ORDNANCE FACTORY MURADNAGAR DISTT. GHAZIABAD 4000 15

rugged notebook-laptop Rugged Notebook-laptop ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Type Regular Regular, Convertible, Detachable Chassis/Casing Magnesium Alloy - PROCESSOR Processor Make Intel Intel Processor Generation 6th 6th, 7th, 8th Processor Intel Core i7 or higher Intel Core i3 or higher, Intel Core i5 or higher, Intel Core i7 or higher, Intel M5, Intel M7 Processor Description 6500 - GRAPHICS Graphics Type Integrated Integrated, Discrete Graphics NA nVIDIA GeForce GTX 950M, Radeon RT 360, NA Graphics Memory (GB) 2 2, 4, 8, 0 (or higher) OPERATING SYSTEM Operating System Windows 10 Professional - MEMORY Type of RAM DDR4 - RAM Speed (MHz) 2133 - RAM Size (GB) 4 1/4 RAM Expandable upto (GB) 16 STORAGE Type of HDD SATA SATA, SSD Hard Disk Drive Size (GB) 500 Hard Disk Drive Speed (RPM) 5400 - CONNECTIVITY Wi-fi Connectivity 802.11 ac - Gigabit NIC 10/100/1000 Available - Bluetooth 4.0 or higher - PORTS USB 2.0 (No.) 1 - USB 3.0 or higher (No.) 3 - USB Type C Not-Available - PCMCIA Slot Available - RJ 45 (Number) 1 - VGA Port Available - HDMI Port Available - Serial Port (Number) 2 - Audio in/out Available - ADDITIONAL FEATURE Port Replicator Interface Available - RF Passthrough Available - Dedicated GPS Available - Mobile Broadband 4G/Lte Not Available - DISPLAY Display Size (cm) 33.782 Display Resolution (Pixel) 1024 x 768 1024 x 768, 1366 x 768, 1920 x 1080, 1920 x 1200 Display Type Touch Non Touch, Touch Minimum Display Brightness (Nits) 1400 - CERTIFICATION ROHS Compliance Yes - Ruggedness Certification to MIL STD 810 G or latest for Drop, Vibration, Water Resistance, Dust Resistance, Altitude, High/Low temperature, Humidity etc Yes - Ruggedness Certificate MIL810G - 2/4 number EMI/EMC Certification to MIL STD 461F or higher Yes - EMC/EMI Certificate number - - Ingress Protection Rating (IP65 or higher) Yes Yes Energy Efficiency Certification Energy Star - BIS Registration Yes - BIS Registration number under CRS of Meity - - OTHER Keyboard Backlit - Optical Drive Not-Available - Weight (With Battery) (Kg) - - TTC TTC showing conformity to the specifications from a Central Government Lab/an ILAC accredited Lab/NABL approved Lab Yes - If Yes, Name of the Lab - - If Yes, Address of the Lab - - If Yes, TTC number & Date - - WARRANTY Battery Warranty (Years) 1 - On Site OEM Warranty (Years) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Omendra Singh 227412, HAL AVIONICS DIVISION KORWA PO-HAL KORWA AMETHI-227412 UP 6 60

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro - 1/3 M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Raghuvesh Kumar 482011, GUN CARRIAGE FACTORY JABALPUR GOVT. OF INDIA MINISTRY OF DEFENCE 150 60

hand held search light Hand Held Search Light ( 23 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of lamp LED Halogen, Xenon, LED Battery capacity (AH) 5.8 - CONSTRUCTIONAL Dia of search light (mm) 101 to 125 50 to 75, 76 to 100, 101 to 125, 126 to 150, 151 to 175, 176 to 200 Wattage of lamp (Watt) 10 1, 3, 5, 10, 15, 20, 30, 35, 5 5 Color temperature (Degree K) 5500 to 6500 deg. K for other lamps 4000 to 4500 deg K for Halegon, 5500 to 6500 deg. K for other lamps Beam angle selection Wide - Range of Narrow beam angle (Degree) and Range of wide beam angle (Degree) up to 4 deg - Type of front glass Toughened, scratch resistant - One hand operated switch Yes - Built-in battery charger NO but external - Type of battery Lithium ion SMF, Lithium ion Battery Voltage (Volts) 12 - Provision of Lanyard Yes - 1/4 strap Rugged, impact and water resistant material of housing Yes - Type of housing material POLYPROPYLENE ABS, POLYCARBONATE, SUPERTUFF GLASS FILLED NYLON, ALUMINI UM, POLYPROPYLENE Accessories such as Battery charger with cable for External type Charging cable for inbuilt type Yes - Gross weight of Hand Held Search with battery (grams) 1.8 kg (max., ) with Li- ion battery - Warranty for HHSL (in years) 12 Months (Li-ion battery) 6 Months (SMF Lead acid battery), 12 Months (SMF Lead acid battery), 24 Months (SMF Lead acid battery), 12 Months (Li- ion battery) HHSL system with battery shall pass the drop testf rom 1 mtr., height Yes - FUNCTIONAL Light output of search lght (LUX at 100 metres)) 750 - Effective distance of search light (Metre) >/= 400 metres - Lamp dimming Continuous - Continuous search light operation time at maximum lumen output (Hours) FOR LED/XENON >/= 3 HRS FOR HALOGEN >/= 1 HR., FOR LED/XENON >/= 3 HRS, FOR LED XENON ./= 5 HRS, FOR HALOGEN >/= 5 HRS Battery charging time (Hours) 9.2 - Operating Temperature range (Degree C) -10 deg C to +55 deg C - Operating relative humidity range (%) RH 95% at 40 deg.c - Lamp life (Hours) 20000 - CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory Yes - 2/4 to prove conformity to the specification Test report number NTH (NR) EL (A) 2016/00851 - Date of test report 15-03-2016 - Name and address of laboratory NTH KAMLA NEHRU MARG GAZIABAD 201002 - PROTECTION Protection against reverse polarity Yes - Protection from battery over-discharge Yes - Protection from battery over-charge Yes - Short circuit protection Yes - IP designation for Ingress protection IP 65 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuttuboina Manoj Kumar 643202, Cordite Factory, Aruvankadu, Dist- Nilgiris 23 90

Multifunction Machines

chlorine dioxide for treating drinking water Chlorine Dioxide For Treating Drinking Water ( 30000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to International Standard DIN EN 12671 Latest - Certificate Available YES - Agency from whom the product is approved BHOPAL BLEACH PVT LTD - Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test Report Number YES - Test Report Date 10/10/2017 - Name of the Lab MP LAGHU UDYOG NIGAM - Address of the Lab JABALPUR - Test report to be furnished to the buyer on demand YES - Physical State and Form Physical State POWDER - Form in which supplied POWDER - Material Raw Material from CALCIUM DIOXIDE - 1/3 which Chlorine Dioxide is produced Physical Characteristics Quantity of Water which can be treated by 1 Kg of raw material (Litres) 1000 Colour WHITE - pH Value 10 - Shelf Life (Months) 12 - Period for which the treated water is safe to use after treatment (Hours) 24 - Packing Packing Size (Kg) 25 25 Packing 25 KG BAG - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akhilesh Kumar 482005, Ordnance Factory Khamaria, Jabalpur 30000 90

classroom chairs Experience with Gov. Required 5 Year (s) Classroom Chairs ( 225 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Foldable Writing pad on One side and Arm on other side Foldable Writing pad on One side and Arm on other side Type of Seat and Backrest 12 mm Thick Plywood Only 12 mm Thick Plywood Only Depth of Seat in mm (+/- 10 mm) 440 - Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 440 - Overall Chair Height in mm (+/- 10 mm) 900 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) 50 - Density of Cushion Used in Seat (Kg/Cubic Metre) 40 - Material of Fabric of Seat Cover 290 GSM cloth fabric - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic 40 - 1/3 Metre) Thickness of Cushion in Backrest in mm (+/- 2 mm) 50 - Material of Fabric of Backrest Cover 290 gSM Cloth Fabric - Width of Backrest (mm) 450 - Height of Backrest (mm) 450 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Under Storage provided below the Seat YES - Material of under storage Powder Coated - Length of Under Storage (mm) 350 - Width of Under Storage (mm) 350 - DEPTH of Under Storage (mm) 100 - WRITING PAD DETAILS Writing Pad Material 18 mm thick prelaminated Particle Board - MISC Colour of Fabric for Seat and Backrest red - Finishing of Structure Powder coated - WARRANTY Warranty period in number of years 1 1 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Akhilesh Kumar 482005, Ordnance Factory Khamaria, Jabalpur 225 90

Air Conditioner

Tape Drive

shoe polish Shoe Polish ( 2940 ) Technical Specifications Specification Specification Name Values Allowed Values Type and Certification Type Paste conforming to IS 1746 : latest Paste conforming to IS 1746 : latest, Liquid conforming to IS 12010 : latest ISI Marked Yes Yes, No CML Number CM/L: 9600007714 - Conformity to IS 1746 : latest Special Requirement for Defence Supplies for Paste Yes Yes, No, NA Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 257/118FEB-2018 - Test Report Date 18-Feb-2018 - Name of the Lab NABL Pusa - Address of the Lab KAROL BAGH - Colour and Quantity Colour of Material Black - Quantity per Pack Size 40 gm 15 gm, 40 gm, 75 ml 1/2 Packing Packing of Material in a Container Press Lid Metal Container (for Paste) Press Lid Metal Container (for Paste), Plastic Container fitted with in-built applicators (for Liquid) Number of Containers per Box 12 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 virender choudhary 248008, Ordnance Factory Dehradun Post Office - Raipur 2940 90

gate valve Gate Valve ( 350 ) Technical Specifications Specification Specification Name Values Allowed Values SIZE/TYPE DIMENSIONAL MATERIAL Classification Class 2 Valves Class 1 Valves, Class 2 Valves Nominal Size of Valve 20 20.0 Type of Gate Valve Solid Wedge Solid Wedge, Split Wedge, Double Disk Type of Valves End Screwed End Valve Screwed End Valve, Flanged Valve Type of Bonnet Screwed-in Bonnet Screwed-in Bonnet, Screwed-on Bonnet, Bonnet Flanges, Bonnet Bolting Material of Bonnet or Cover Brass Brass Material of Body Brass Brass Material of Stem, Hinge Pin and Plug Extruded Brass Rod - Word 'OPEN' or 'SHUT' with arrow to indicate Direction On Handwheel - Weight 0.16 - CONFORMITY CERTIFICATION Conformity to Indian Standard IS 778 : latest - 1/2 ISI Marking false Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true - Test Report No and Date - - Name and Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 UJJWAL KANT 767070, ORDNANCE FACTORY BADMAL, AT/PO- BADMAL 350 90

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 1 Year (s) OEM Cartridge/Consumable ( 55 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 - 1/3 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bela Sehgal N 110011, Krishna Menon Marg 55 25

OEM Cartridge/Consumable, OEM Cartridge Consumable, OEM Cartridge/Consuma OEM Cartridge/Consumable ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number HP 128A Magenta Original LaserJet Toner Cartridge - Corresponding Part number/code CE323A - Printer Model number/numbers for which Cartridge is suitable HP Color LaserJet CM1415fn MFP Printer, HP Color LaserJet CM1415fnw MFP Printer, HP Color LaserJet CP1525n Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1300 - 1/5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Thejas S 560017, MCSRDC, HAL Main Factory, Vimanapura Post, Old Airport Road 2 15 OEM Cartridge/Consumable ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP Black Contract Original LaserJet Toner Cartridge (HP 93A Black Original LaserJet Toner Cartridge (CZ192A)) - Corresponding Part number/code CZ192AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro M706n Printer, HP LaserJet Pro MFP M435nw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 12000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Thejas S 560017, Old Airport Road 10 15 2/5 OEM Cartridge/Consumable ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity 3/5 S.No. Consignee Address Quantity Delivery Days 1 Thejas S 560017, Old Airport Road 15 15 OEM Cartridge/Consumable ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge - Corresponding Part number/code Q2612AC - Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Thejas S 560017, HAL Main 20 15 4/5 Factory, Old Airport Road

Steel Bookcases

Executive Table

Compatible Cartridge

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 40 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge - Corresponding Part number/code Q2612AC - Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP - 1/2 LJ3055 All-in-One Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 40 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 36A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CB436AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1522n MFP Printer, HP LaserJet M1522nf MFP Printer, HP LaserJet P1505 Printer, HP LaserJet P1505n Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 30 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand RICOH - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number Print cartridge SP200LS - Corresponding Part number/code 407265 - Printer Model number/numbers for which Cartridge is suitable SP 210, SP 210SU, SP 212, SP 212Nw, SP 212SNw, SP 221, SP 221Nw, SP 221SNw - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 25 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 30 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 35 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1136 MFP Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro - 1/3 M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Raizada 160002, Ordnance Cable Factory Plot No 183 Industrial Area Phase 1 Chandigarh 35 15

Layer 2 Access Switch Layer 2 Access Switch ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed Technology PoE+ PoE+ Number of 1G Copper Ports 24 24 Number of 10G Copper Ports 0 No. of 1 G SFP Port (Uplink) 2 2 No. of 10 G SFP+ Port (Uplink) 0 Multi-Gigabit Support Yes Yes, No Redundant Power supply ( from day one) Available Available Console Port Available - Switching Capacity -Non Blocking (Gbps) 101001000 - Throughput (MPPS) 101001000 - Operating System available - Dedicated Stacking Port/Slot ( from day one) available - 1/2 Stacking Bandwidth (Gbps) 101001000 - Basic Layer-3 Protocol 0 - Security Feature yes - Management Protocol 0 - QoS 0 - Operating Temperature Range (Degree C) 62 - Operating Humidity (RH)(%) 0 - IPv6 Ready from day one and dully certified Yes - PoE Power Budget ( Watt ) 1 - on Site OEM Warranty 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ARUN KUMAR 743144, General Manager Rifle Factory Ishapore Ghoshpara Road, Nawabganj, Ichhapur 5 15