Director of Technical Education Department Mumbai Tenders

ITEM NAME

Product Specification - 4 dr. bookrack ( 830 W x 310 D x 1680 H ) 1.Dismantling Remove all doors from the bookcase carefully.Detach handles, locks, and glass panels without causing damage.Keep all hardware safely for reassembly. 2.Surface Preparation - Cleaning: Remove dust, grease, rust, and old paint using sandpaper, wire brush, or approved chemical cleaners. Initial Sanding: Use emery paper (80–120 grit) to smoothen the surface for proper adhesion. Putty Application: Apply metal/wood putty to fill dents, holes, and imperfections. 3.Final Sanding: After putty dries, sand the surface again to achieve a uniform finish. 4. Repair Work- Replace broken glass panels with new glass of same size and thickness.bRepair or replace damaged locks and handles. Ensure all moving parts (hinges, locks) are functional. 5. Primer Application- Apply one coat of high-quality primer suitable for metal surfaces.Ensure uniform coverage and allow proper drying time. 6.Painting- Apply coat Duco furniture enamel paint using spray method. Light sanding between coats for smooth finish. Color: As approved by the department/engineer-in-charge. 7.Finishing- Ensure glossy, smooth, and defect-free finish. Remove any paint runs, sags, or uneven patches. 8.Alignment & Reassembly- Reassemble all parts including doors, glass panels, locks, and handles. Check alignment and functionality of doors and locks. Final inspection and touch-up as required.