Loading
Loading…
Loading…
92 results • Latest
Inspection Gauge for ERC Mark-V (T-5919) as per RDSO specification RT-5920
Inspection gauge for Metal Liner 60 KG RDSO drawing T-3740.
SUPPLY, INSTALLATION AND COMMISSIONING OF IOT BASED WATER LEVEL INDICATOR SYSTEM.
BFB steady arm (32x31x3mm) 0.92 m long ,RI No. 2544-2, as per RDSO drg No. ETI/OHE/P/2540 Mod-B or latest. Make:- CORE/RDSO approved only.
Supply of Plastic Cover for Shunt Signal & Route Body .
SEALING CAP FOR TROCARS as attached specification.
Feeler Gauge 0.01-3.O mm, 20 Blades Offered & accepted make : INDIGENOUS or similar
Emergency Resuscitation kit (CPR Kit)
Plastic cover
Inspection gauge for GRSP to RT-6618
Lashing chains 3/4'' inch and 50' feet length (20 mm) as per specification attached.
PROTECTION COVER FOR PASSENGER EMERGENCY ALARM PULL BOX.
Unbranded steel fabricated and stress relieved double action hydraulic press , Capacity 20 ton.
Inspection Gauge for ERC J Clips T-8423 As per attached drawing.
Inspection Gauge for Metal Liner Drg No.T-8748.
DIRT COLLECTOR WASHER SIZE = ID 30 MM X OD 41 MM.
Complete set of Inspection Gauges for GFN Liner RT-3706.
checking gauge at point 'H' ( 22 MM Head thickness), 3. Gauge No.2/1-Head with checking gauge at point 'H' (22mm Head thickness), 4. Gauge No.3A & 3B-Head with checking gauge at point 'H' (55 mm Head thickness), 5. Gauge No.3/1-Head with checking gauge at point 'H' (55 mm Head thickness). List of gauges as per RDSO and enclosed as Annexure-I.
Supply of Copper cross feeder wire 150 sq mm [37/2.25 mm]
"supply, installation, Commissioning and Testing of HOG Testing Bench as per Specification No. Mech/P/Umbrella Proj/Testing Trolley, Rev- Nil Dated 07/12/2021"
SUPPLY INSTALLATION,TESTING AND COMMISSIONING OF AC PORTABLE BRAZING MACHINE .
BATTERY OPERATED CORDLESS HOT AIR GUN/ HEAT GUN FOR TEMPERATURE UP TO 530 DEGREE C OPERATING ON 18V/20V BATTERY. Accepted Make: - MAKITA/INGICO/ADLUM/BOSCH or similar. PRODUCT WEIGHT NOT TO EXCEED 600 GRAM.
Radio Frequency Plasma Generator
Supply of Demineralization/ Distill water Plant with Super charge Housing & Resin complete to give DeMineralized Water 50 L/hour of TDS between 0 to 3 Make- New Aqua Solution or similar
Inspection Gauge For Joggle Fish Plate 60 Kg Drg. No. T- 5849
Supply and commissioning of Portable LIBS Spectrometer-LIS 02.
Live Line OHE Measuring Gauge (LLOMG) with rugged tablet and all associated accessories supported with Android application for height and stagger measurement as per RDSO Instruction No. TI/IN/0046, dtd:- 16.02.2026 or latest.
Supply Installation and commissioning of Battery operated armoured cable cutter.
Supply, Installation & Commissioning of ULTRA THERMIC CUTTING EQUIPMENT
HARMONIC SCALPEL HAND PIECE HP054
Inspection Gauge for Fish Plate 60 KG T-5916
Inspection Gauge for GFN Liner (T-8751 to 8753).
Hysteroscopy (Diagnostic & Operative)
ISI marked 5 Star BLDC ceiling Fan 1200 MM.
Endoscopic System for Suction & Irrigation
Supply of Various items for DETC tower wagon as per attached Annexure, each item quantity require 1 nos. are as follows: (1) LED PANEL(DETC) AS PER DRG. NO. 801002030000-GA REV-01 OR LATEST, (2) BATTERY CUT OUT SWITCH, AS PER DRG. NO. 802001022800-GA REV-00 OR LATEST, (3) GFR GRCO ASSLY. AS PER DRG. NO. 802001022400-GA REV-01 OR LATEST, (4) DIODE ASSLY. AS PER DRG. NO. 802001022500-GA REV-01 OR LATEST, (5) MOTOR CONTROL SWITCH, (3 OUT-1 OUT), (6) MOTOR CONTROL SWITCH (4 OUT-4 OUT), (7) OHE SENSOR, (8) SPEEDOMETER DETC, MTR 918, (9) AMMETER (144X144 SQ.MM), 100 A, (10) VOLTMETER(96X96 SQ.MM), 150V, (11) VOLTMETER(96X96 SQ.MM), 50 v, (12) LOAD AMMETER SHUNT, 100a, (13) FUSE, 63 AMP, (14) FUSE, 32 AMP, (15) TIMMER, ANALOG DISPLAY, (16) ENGINE CONTROL SWITCH, (17) INDICATOR LAMP, (18) BATTERY CHARGING SWITCH (DETC), ROTARY TYPE
Anesthesia Work Station.
Kit turbocharger suitable for 1600 hp demu dpc