Loading
Loading…
Loading…
92 results • Latest
Wooden Packing Size 300 X 300 X 50 MM for making load Bering working with hydraulic jacks for use of ART capable to withstand 140MT load of seasoned sal wood/sheeshm wood or Equilent chemically treated with red oxide and oil paint and both end secure by 30 mm X 5 mm iron strip.
COVER ASSEMBLY HAND HOLE TO EMD PART NO: 9315109 AND BLW PART NO: 16020406.
Electronic torque wrench tester with integrated torque transducer (DMS), Torque range: 09-320 Nm, as per attached specifications. Make: GEDORE/RIGID/ARMSTRONG OR STAINLEY OR Similar.
TOOLKIT FOR TRD DEPOTS AS PER ANNEXURE-A CANTAINS 43 ITEMS IN ONE SET, EACH ITEMS QUANTITY SHOWN IN ANNEXURE-A
NI-Cd Battery set for 3-Phase Loco to CLW Spec. No. CLW/ES/3/0030 Alt-D or latest. Each set consists of 26 Blocks of 03 cells each
CONTACTOR 325 AMPS TO EMD .PT. NO. 40037904
CPM 401 as per EMD PT NO.40104546 specn: BLW PT NO.18120878 as per attached DRG.
Relay Drive Card,Auto Reset Card,Micro Controller Logic card,SURGE VOLTAGE PROTECTION DEVICE,MODEM CARD & DC DC Converter card.
64 VOLT DC CRANKING MOTOR LOCOMOTIVE APPLICATION TO SPEC NO.EDPS-142 EMD PT. NO. 10478829 BLW PT. NO. 18090011
CBC Gauges for Coaching .01 Set of CBC gauges consist of 06 gauges for checking of AAR H type Centre Buffer Coupler of LHB coaches. Gauges made of hard steel alloy or stainless steel with Hardness 45-50 HRC specifications as per annexure attached. Note : NABL accredited calibration certificate with 24 months validity is required along with gauges. Make : GANAPATI OR PIE OR JYOTI Or similar
Conservator with stuchi coupling for 3-phase Loco Main Transformer as per ABB Document no. HSTN310675 or CLW latest Spec. no. CLW/ES/3/SK-3/0507.
GANG WORK SITE REMOTE CONTROL HOOTER as per RDSO Specification no. (No. TM/SM/318 Dated 21.05.2008)(First Revision of 2021) or Latest.
SET OF DAMPERS (SHOCK ABSORBERS) FOR WAP-7 LOCO AS PER CLW SPECN NO. CLW/MS/3/SPEC/ELDO-BOGIE/002 (Alt-1) AND CLW DRG. NO. 1209-01.215-014, ALT- 2 COMPRISING OF :- (1) AXLE DAMPER, QTY- 08 NOS, (2) VERTICAL DAMPER, QTY-04 NOS, (3) HORIZONTAL DAMPER QTY- 04 NOS,(4) YAW DAMPER, QTY- 04 NOS. i.e. 04 ITEMS IN 20 NOS. AS PER SET.
LOW MAINTENANCE LEAD ACID SECONDARY CELL 2V/80AH CAPACITY
COIL SOLENOID WW GOVERNOR. WW PART NO 1698-1262.
Joint Assembly Adapter to Turbo charger to EMD Pt. No. 8408987 and to BLW Part No.16240807.
Helical Spring for Bogie of High Power DEMU/DPC 1400HP to ICF Drg. No. DMU/DPC5-0-1- 501, Alt. l
Laporoscopic Trocar 6 mm with Cannula 6 mm.
HIGH PERFORMANCE RAIL CLAMP as per attached specification .
Superior quality Pillow for AC coaches.
BFB steady arm (32x31x3mm) 0.92 m long ,RI No. 2544-2, as per RDSO drg No. ETI/OHE/P/2540 Mod-B or latest. Make:- CORE/RDSO approved only.
Torque Wrench Tester as per attached specification.
GPS based OHE monitoring & Current collection system Oliver-G as per RDSO spec No IS/RDSO-TI/0001:2023.
Interface card for Reset Box,Event Logger Card,Signal conditioner Card & Supply of Dual MLB card.
LCC Governor, Model No. LCC 107-B1,equivalent to Cummins Part No.- 3167063, Make: Cummins/Pune or GAC/USA or Sirveen Control System/Hyderabad or similar.
Portable DC Welding Generator as per RDSO Specification no. TM/SM/20 dt: 19.11.1992.
Rail Jumper with clamps at both ends 13 mtr Long complete as per RDSO Drg. No.RE/33/P-500. ( RAILCLAMP MADE OF AL.BRONZE IS: 3091/1999 and PVC COPPER CABLE SIZE: 248/0.45mm ) Make:- PEC, SDU,SST, IM or Equivalent.
Staff Lockers as per Drawing No. CWM/Mech/JU/Sketch-1416
Rope Lube Oil-1000 for lubrication of SS wire rope (Packing - 18 Kgs/Drum). Make :- BALMEROLE, HPCL, IOCL, BPCL or SIMILER.
Live Line OHE Measuring Gauge (LLOMG) with rugged tablet and all associated accessories supported with Android application for height and stagger measurement as per RDSO Instruction No. TI/IN/0046, dtd:- 16.02.2026 or latest.
ISI marked 5 Star BLDC ceiling Fan 1200 MM.
Control portion 20-pipe as per M/s. KBIL part no. 787775-1994 for CCB 2.0 Brake system.
OPO 85 Multiple- Use (Reusable, Sterile) Phaco tubing for Compact intuitive phaco- emulsification system.
Washers pack of 10 for 6 MM trocar
Bipolar high frequency cord, length 300 cm.
LED BASED FLASHER LIGHT SYSTEM TO RDSO SPEC NO: ELRS/SPEC/LFL/ 0017(REV.1,SEP-2004).
Aluminium Wall Supporting-Sliding Ladders, Height 50 foot as per attached spec.
GUN METAL/ BRONZE 40mm VERTICAL CHECK VALVE.
Supply of Suspension clamp body(1161)
Complete Set Of Inspection Gauge.
Supply of 50 mm Aluminium Tubular Bus Bar of Size - 50 X 39 mm As Per IS - 5082 Al alloy to Grade In WP Condition And IS - 2673 (accuracy Class - I) as Per Gr. 91e to IS:5082 - 1998, IS : 2673 -2002 And RDSO Specification. No. Spec : ETI/OHE/21(9/74) or latest.