Loading
Loading…
Loading…
77 results • Latest
Driver control Switch Type - 3DCS-DTC for tower wagon.
Bolt Hex Head 3/8 Inch-16 TPI x 1-1/8 In
Driver control Switch Type - 3DCS-DTC for tower wagon.
KIT GASKET TURBO CHARGER TO EMD PART NO. 40069484
Supply of Work Bench (500 kg Load Capacity) as per KPA drawing No. RECT/MECH/010723. Size : 2400mm X900mm X 880mm.
Heavy Duty Rubber Platform Trolley with handle, Load carrying capacity 400-500 Kg, as per Detailed Technical Specification of Annexure-B, enclosed.
A Set of Hardware items for Radiator Core of HHP Locomotives consisting of 05 items - (1) Hex Head Bolt M12 X 40 mm (Pitch 1.75), Thread Length - 30 mm (Approx.), Qty - 2000 Nos. (2). Hex Head Bolt M12 X 50 mm (Pitch 1.75), Thread Length - 30 mm (Approx.), Qty - 2000 Nos. (3.) Hex Head Bolt M12 X 70 mm (Pitch 1.75), Thread Length - 30 mm (Approx.), Qty - 500 Nos. (4) Hex Nut M12 X 1.75, Qty - 6000 Nos. (5).
WASHER BELLEVILLE 0.755 I.D. FOR THE BRAKE HEAD OF HHP LOCO EMD PART NO. 40016368. NOTE: 1. WARRANTY CERTIFICATE(WC) & TEST CERTIFICATE(TC) ARE ALSO REQUIRED TO BE SUPPLIED.
MAINTENANCE KIT FOR LIMITING VALVE PART
Shank Wear Plate for Upgraded high tensile CBC to RDSO DRG.NO. SK-62724, ALT.- 31, Item no.10. & Other Technical Requirement Confirming to RDSO STR. No. WD-70- BD- 10, Rev.04 of Nov-2024.
CERAMIC HYBRID BALL BEARING 6302 TNH/HC5
PIN KIT FOR BRAKE RIGGING (CONSISTING OF
Ceramic hybrid ball bearing 6305 TNH/HC5
PTFE THREAD SEALING TAPE SIZE 12.5 MM
TRUCK BRAKE LEVER BRACKET ASSEMBLY TO DL
CB 2 POLE, 5A, 74VDC WITH SAFETY GUARD F
Kit For Vent Valve (773336) For EBV to
Circuit breaker 2 Pole, 10 Amp. ,74 VDC
Bolt Hex Head 3/8 Inch-16 TPI x 1-1/8 In
RearTyre with Tube & Flap for TATA truck
BC-BP Gauge to EMD Part No. 10631881
MR-ER gauge to EMD Part No. 10631881
GASKET (RETAINER- PRINTED BEAD) AS PER EMD Pt. No. 40039280 and BLW Part No.16170532.
-A SET OF P PIPE BOLT CONSISTING OF 02 ITEMS HEX HEAD BOLT-5/16"-24 TPI, UNF- 2A Threads x 1" length to EMD DRG No: 181339, Alt "Ea", Qty=32 nos (DLW PT No: 19011052) , BOLT-12 Points, 5/16"- 18 TPI, UNC-2A Threads x 1 "Length to EMD DRG No .8348718, Alt "Aa", QTY=32 Nos (DLW PT No:19011143)
SWITCH, Push-button -Emergency fuel cutoff and engine stop to EMD Part No. 40058776, and to DLW Part no. 18310199 for WDP4/WDG4 Locos, drawing with latest alt..
Set of male and female connectors of M/s. Allied Electronic Corporation part no: AEC 3102R 20L-014P SP2 C30 with modified dimensions suitable for WW governor of HHP Locomotives (Male Connector) and M/s. Allied Electronic Corporation part no: AEC 3108F 20L-014S SP2 C30 TB (Female Connector) or their equivalents of ITT cannon or Amphenol make. The male connector shall be supplied along with abrasion resistance PTFE cable of 450 mm length and potting has to be carried out with Anabond 909 to avoid oil ingress, as per RDSO MP.IB.EC.01.07.15(REV 00),Dt- 22.12.2015
ROTARY SWITCH 30 AMP. 6 NC-6 NO INTERLOC
SET OF 02 GASKETS FOR WATER COOLED AIR COMPRESSOR (1) GASKET COOLER WATER IN SIDE TO ELGI PART NO: 07031043A, QTY/SET: 01 NOS, (2) GASKET COOLER DUMMY SIDE EQUIVALENT TO ELGI PART NO: 07031042A, QTY/SET: 01 NOS.
Bolt Hexagonal (cap screw) as per DLW Pa
SHIM Vertical - 1 inch thick to drawing No.9516472 Alt a & BLW part No 17083370.
Circuit Breaker 2 Pole, 6 Amp., 74 V- DC in Siemens Controlled HHP Locomotives to Siemens Pt. No. 102327843 or Eaton Part no. AM2R - B3 - LC-07 - D - A - 102176332.
SET OF 03 FASTENERS FOR CBC CARRIER (CBC TABLE) (1) BOLT Hex head 1-1/8 - 7 x 5 to EMD Part No. 9429773. (2) NUT Self lock 1-1/8-7 to EMD Part No. 8032767. (3) WASHER Flat 1-1/4 to EMD Part No. 9533676.
Carrier Assembly coupler to EMD part No
Low Voltage Insulation Tester (Megger), measuring range 0 to 20 Mega Ohm, test voltage 100 Volt , complete with valid calibration certificate accredited by NABL or any Government-approved calibration laboratory.
M.S Dummy Plug Size-1 Inch With One Hole
Heavy Duty Rubber Platform Trolley with handle, Load carrying capacity 400-500 Kg, as per Detailed Technical Specification of Annexure-B, enclosed.
RETAINER Spring Clip to EMD Part No.148147 and DLW PART NO. 19340230 and DLW Drg. No 148147 Alt-Ca for Adjusting Link and injector Control Lever of HHP Diesel Locomotives.
BOLT HEX HEAD 5 / 8 -11 X 3 - 3 / 4 to E
Gasket Head and Cover to ELGI Part No. 070403850 for ELGI make water-cooled air compressor of HHP locomotives.
Motor connection box to ICF DRG. No. ICF/SK-7-1-470 Alt. e /latest for tower wagon..
AOH Kit for MVCC Valve Rotex Model NO.32
TENDER DESCRIPTION RELAY GP EMD PT NO.8
SUPPLY,INSTALLATION AND COMMISIONING OF
LED light fittings 9W as per drawing ICF/STD-7-6-042-Item:2 conforming to RDSO Spec. No. RDSO/PE/SPEC/TL/0091 -2016, Rev.1.
HOSE ASSY 15/16 X 1/2 X 20 TO EMD PT.NO
CIRCUIT BREAKER FUEL PUMP TURBO LIGHTS
AOH kit for pulse generator speedometer
METER TRACTIVE EFFORT/ BRAKING EFFORT
BUSHING TRACTION ROD FOR WDG4/WDP4 LOCOS