Loading
Loading…
Loading…
25 results • Latest
Set of sealing washers for gear cases of WAG9HC Locos consisting of 1)Sealing Washer Type A Dia.68/60 x 2.5mm Thick. As per DIN 7603; Material: Copper - 12 No/Set 2) Sealing Washer Type A Dia.32/27 x 2mm Thick. As per DIN 7603; Material: Copper - 06 No/set. Note: One set Sample to be got approved before effecting bulk supply.
MCB 2 pole current rating 10A, voltage rating 250V DC, C Curve, as per Spec. No. CLW/ES/3/0037 Alt-H or latest for HOG control circuit modification as per RDSO MS No. RDSO/2026/EL/MS/488 (Rev 1)
RUBBER KIT COMPRISING OF 13 ITEMS FOR C2N MAKE FEED VALVE TO SIL PART NO. 29197201 AS PER ENCLOSED ANNEXURE -1 SAMPLE TO BE APPROVED PRIOR TO BLUK SUPPLY
1) Digital Dial Bore gauge of range : 50-150mm, LC 0.001mm with calibration certificate. Make : Mitutoyo / Vogel Germany /Starret /SPI /IGaging /Insize only. 2) Digital Dial Bore gauge of range : 150-250mm, of Mitutoyo 511-805 or equivalent along with Absolute Digimatic Indicator ID-C range 12.7 mm of Mitutoyo 543-310B or equivalent . Make : Mitutoyo / Vogel Germany /Starret /SPI /IGaging /Insize only. 3) Digital Dial Bore gauge of range : 250-400mm, LC 0.001mm with calibration certificate. Make : Mitutoyo / Vogel Germany /Starret /SPI /IGaging /Insize only.
Locking Plate for HHP Loco Axle Bearing to RDSO drawing No. WD-06085/S-2 Alt- 1.
BRAKE SHOE COMPLETE, NOMINAL SIZE TO IR PART NO D/BG-1753/X2, ALT.8 REF.NO 2 D/BG-1753/1,2 AND 3 AND RDSO MATERIAL SPECIFICATION NO M AND C/MTD/101/2007.
Ring Gauge for Pinion of WAP-7 Locos. reference RDSO Drawing no: - SKEL-5043 Alt. 0 along with calibration certificate. Note: - Supply of ring gauge with the following items (1) Pulling Extractor for easy removal of ring gauge from shaft pinion (2) Gauge (GO & NO GO) size: - 15.0mm (+/- 0.30) with calibration certificate.
SURGE ARRESTER FOR CURRENT TRANSFORMER FOR 3-PHASE LOCO TO CLW SPECN. NO. CLW/ES/3/0085 ALT A OR LATEST
Cable size AWG#18, to EMD Part/ DLW Drawing No. 8466845 Rev D, DLW Part No. 18330010 as per DLW Drg. No. 9094883 Alt Lb or latest, DLW Part No. 18331130. Note: Material to be supplied in continuous spool
LED BASED HEAD LIGHT AS PER RDSO SPECIFICATION NO. RDSO/2017/EL/SPEC/0134 (REV-2) FOR DETC.
SAND BOX ADAPTOR ASSY to CLW Drawing No. 1209-01.338-134
Lower Spring Seat for Axle Box Guide Arrangement consisting of Item-1 & Item-2 to ICF Drg. No. DL-0-1-103 Alt z/14 Col-II.
Air supply isolating cock for panto graph with Kaba key. (provided in the E-70 brake system of WAG-9 & WAP-7 electric loco ); Drawing - CLW drg no. 1209-15- 243-072 CLW/ES/3/SK-3/0049 or latest
Spring loaded switch momentary release hand operated flush type push button switch double NO interlock cutout 22.5mm, colour Yellow, embossed VR as per CLW Spec. no. CLW/ES/3/0072/I or latest, confirming to RDSO/2024/EL/MS/0505(Rev. 1)
Female pin for blocking diode (DIBLO-5 or DIBLO-8) used in 3-phase locomotives as per ABB ID.No. HBT415176P0001 & CLW Spec.No.CLW/ES/3/0055/H
Exp Insulated Tube 8/15 PA As per CLW Drg/Spec. No CLW/ES/3/0154/T or latest
Silicon oil based thermal joint compound to wakefield solutions MFR P/n. 120-5 or GC Electronics P/n. 10-8109 or DOWSIL 340 or fully equivalent of Electrolube/Aavid Thermalloy/ Fischer Electronic only. To be supplied in squeezing tubes of less than 250 gms each in a tube.
CABLE LUG 1.5-2.5/M4 CU VZN as per Specn. CLW SPECIFICATION NO.CLW/ES/3/0130/O or latest
2KG PORTABLE CO2-TYPE FIRE EXTINGUISHER AND BKT ASSLY. as per CLWs Drg./Specn No. CLW/MS/3/016 ALT-3 and 1209-13.240-025 Alt-5. or Latest.
Positive Catch of Glass Shutter as per Ref No.10 of CLW Drg.No.1209.09-133-005 Alt.6.
SEALING PLATE GASKET FOR COVER ASSY. AS PER DRG.NO.1209-01-411-038 FOR 3- PHASE LOCOS
BOX FILE CARDBOARD LAMINATED. The specification are - 1) Size : 35cmx28cmx8cm(approx). (2) Mechanism : Stainless steel clip mechanism for holding (3) Suitable for A4 size and equivalent (4) Weight : Not less than 500 gms (5) Capacity : Minimum 500 sheets. Note: 2 Nos Sample to be approved by consignee before bulk supply.
Hand held Led Model Torch Light With Aero Aluminum Metal Body With Charger Similar to Britelite kore 1900M flashlight super bright with up to 100000 hours life. Make: Britelite/FOS/Realbuy/Gunlite (Note: OEM Authorized certificate and warranty certifcate to be submit)
Striker casting wear plate as per CLW Drg No.05/3/57/31 Alt-8 or latest, Item No.2
SET OF PACKING SHIM SPRING FOR BEARING IN SET FOR TMB/MRB/SCTMB/SCMRB MOTOR AS PER DRG NO. A4/2019/CNB/2659/5012/SN & 4/2019/CNB/2660/5013/SN(ONE SET CONSIST 04 NOS) SAMPLE APPROVAL BEFORE BULK SUPPLY.