DSL/GUNTAKAL/SOUTH CENTRAL RLY Tender Results

Set of bellow fixing clamps for MRB, TMB & OCB filters. 1) Bellow fixing clamps for MRB filters Qty/set.= 150 nos. 2) Bellow fixing clamps for TMB & OCB filters Qty/set.= 300 nos. Note: One sample set of each filter item should be got approved before effecting bulk supply.

Set of Complete plug Receptacle, front panel mount series couplers. Set consisting of 03 items

Set of Wheel profile Parameter Measurement Gauges

Supply of Set of Eco Vinyl Solvent Print Stickers with Lamination and profile cutting

Edge wound corrugated resistor 4.7 ohms/500 W

Necked down bolt size M20X67 mm long PC 8.8, IS 1367 Part 3 as per RDSO sketch No:2009- 17. ( As per UVAM ID : 2100295).

PCB for trident make Air dryer model no. LD2000132 or similar to controller card no. AD 1224 as per Specn. PT No-AD1224.

Hose flexible for TM135 Ventilation of 3-phase locos as per CLW Drg. No. 1209-11.339-037 Alt - 1 or latest if any.(As per UVAM ID :2100225)

Centre Roof Bolt Fixing Threaded Block as per Drg. No: B/TRS/AUX/4/364 or latest if any for 3- phase locos. Note: Ten samples should be got approved before effecting bulk supply.

Pinion Shaft 21 Teeth for WAG9(new series)locos as per RDSO Specification No. MP-0-2800- 19(Rev-01)June-2019 or latest and confirming to RDSO drawing No. SKDP 3847 Alt-1 .(as Per UVAM ID- 2100257).

Supply of Refrigerant gas R-407C confirming to IS: 5610/1993, re affirmed-2006 or latest if any, in 45 Kgs capacity standard cylinders on non returnable basis by filling Refrigerant gas R- 407C. Note: Gas must be filled in company's sealed refrigerant gas cylinders indicating cylinder weight, net weight of the gas & gross weight, date of refrigerant gas along with test certificate of gas & cylinder, otherwise subject material is liable for rejection.

Locking Plate for Pivot Housing for WAG9/WAP7 as per CLW drawing No 1209.01.413.025 Ref 1 and 2. (As per UVAM ID: 2100303).

Contact Roller Complete of Tap changer as per specification ELRS/SPEC/GR/0039 Rev 1 to M/s. REPL Part No. S1515 and to Drg. No. AG546151-R1 or Contact Roller to M/s. Anantashree Part No. G1515 and to Drg. No. 9980383530801. (AS PER UVAM ID: 2100713).

End frame Non Driving End assly. (machined) of WAP7/WAG9 loco for Traction Motor (type 6FRA6068) as per CLW/Drg.No.0TWD.096.003/ Ref.5 Alt.13. or latest and CLW Specification No.4TMS.096.068 Rev-2, Alt-2 or latest. (As per UVAM ID: 2100501)

1400 watt corded small angle grinder, Power: 220-240V AC, 50/60 Hz, Disc dia of 125mm

Hose Coupling for Sanders conforming to ELS/LGD Drawing No.C/ELS/LGD/ Pn. Eqpt./3/30 Alt-1, UVAM Id : 2100901

Radiator cleaning agent of locomotives as per RDSO SMI-287 REV-1, Make: ASFOCLEAN AD-20 or ALSTASHINE R20 or equivalent make suitable to RDSO SMI-287 REV-1. Packing in 50 Liter HDPE jar.

Set of spares for ELGI Make CRC 150 Compressor consisting of (1) |RING PKG 17.5X22X2 LG01080 to part no: 000521950 Qty- 100 nos, (2) PLUG DRAIN 3/8"BSP CRC150 to part no: 000481220 qty- 100 nos , (3) DS CUM BREA.NYL.LG01;BРО to part no: 000427030 Qty- 100 nos.

Insulating washer for CGR to REPL part no : S2505 or to Anantashree part no : G2505.(As per UVAM ID : 2100713).

Bearing Pin for CGR to REPL part no : S2519 or to Anantashree part no : G2519..(As per UVAM ID : 2100713).

Gasket for temperature sensor cover of traction motor of type 6FRA-6068 as per CLW Specification 4TMS.096.087 Rev-1 or Latest and conforming to Item-III Fig-B.(as Per UVAM ID- Item Id:- 2100443).

Rubber Kit for 3 piece design 1 1/4 inch BP/FP Angle cock as per Ref.7, 8 & 12 of S.C. Rly. Drg. No. C/ELS/LGD/Pn.Eqpt/3/54 or latest. Set consisting of 03 items (1) Flange as per Ref. No.7. - 02 Nos. (2) Valve Seat as per Ref. No.8. - 02 Nos. (3) O Ring as per Ref. No.12. -01 No. UVAM ID :2100834

Axle Box Bearing for WAG9/WAP7 Locomotives and along with additional plain racer and Lipped racer of each 01 No. Details as per attached Annexure. description: Axle Box Bearing for WAG9/WAP7 Locomotives to FAG Model No. F-807259.02.ZL (with Brass cage) OR FAG Model No. F-807259.05.ZL (with Polyamide cage) as per Latest RDSO Vendor Directory (UVAM) and along with additional plain racer and Lipped racer of each 01 No. Make : India (As per UVAM ID: 3100104).

Cam Assembly for Motor Contactor as per CLW Drg. No. 3TWD.112.076 Alt.2 or latest. Set consist of: (1) Cam- 6 Nos. (2) Fixing plate- 1 No. (3) M6 X 10 Hex screw- 1 No. (4) Spring Washer- 1 No.

Hall effect Active Speed Sensor assembly suitable for IGBT 3-Phase Locos Traction Motor consisting of Hall effect Speed Sensor and cable as per CLW Spec.No. CLW/ES/3/0528 Alt.A or latest,Ref.No.1 & 3 of scope of supply.

MVMT (Class-H) as per CLW Spec. No. CLW/ES/B-14/C & RDSO Spec. No. E-10/03/08 or latest if any. (As per UVAM ID: 2100977)

Counter Sunk Screw Hex Socket M10x25, Coarse Thread (Pitch 1.5 mm) P.C. 10.9 to IS:6761/1994, with Mechanical Properties as per IS: 1367 . Note: Countersunk Screw bolts should confirm to zinc coating as per IS:1367 (Part 6):2002.

COUPLING TUBE FOR N-32 TAP CHANGER TO M/S REPL PT. NO. S-1437, DRG.NO. AG-416635 P1, OR TO M/S ANANTASHREE PT. NO. G-1437. (AS PER UVAM ID: 2100713)

IOH REPLACEMENT KIT FOR NEW 22CB LOCO Sc

Grinding wheels of size- 125mm (Dia) x 22.3mm (Bore) x 6.8mm (Thick), Conforming to specification EN 12413. Make: BOSCH/GRINDWELL/ NORTON/ORIENT/3M/ Equivalent.

Modified Earth Shunt Assembly for Traction Motor to loco body as per S.C.Rly Drg No. C/ELS/LGD /TM/3/44.Alt-2. or latest(if available.)

Set of spares for MRT Make Pulse Generator consisting of (1) Processor (Master) Card to MRT part no: SP101011MB, Qty- 1 no./set (2) Mother Board (Master) Card - Conventional to MRT part no: SP101031MC, Qty- 1 no./set.

Female connector with 25 pins for 25KV VCB of Schneider Electric Make as per Part code No. NPRM5510241_S.

Extra Hard proofed woolen felt for brake cylinder of size: 5mm X 10mm X 600mm as per IS:1719/2000. (As per UVAM ID: 2101237).

Set of LED based Loco signal exchange light as per RDSO Modification No. RDSO /2018/EL/MS/0470, dtd. 18.06.2018. Set consist of (a) Four sub sets of LED lights (i.e. 4 Red & 4 Green) for loco outside fitment as per RDSO Spec No.ELRS/SPec/PR/0022 or latest, Operating voltage 110V DC nominal. (b) Four Nos.of operating panels consist of 2 push buttons i.e BPSW as per Spec No.CLW/ES-S-8 or latest (single N/O) and 2 Repeater lamps (Red & Green) as per CLW Spec No.CLW/ES/L-24 or latest ,Operating voltage 110 V DC nominal. (As per UVAM ID: 2100408). Note: One sample set should be got approved before bulk supply.

Safety bracket for WAG7 brake pull rod as per Drg. No.Sr.DEE/RS/ED/Mech-72.

National flag with UV Print Glassy Laminated Water Proof and Weatherproof Retro-Reflective Radium Sticker As per RDSO/2006 CG-13 Rev-01 of Size: 450 x 300mm.

Set of spares for ELGI Make TRC 1000 MN UG Compressor consisting of (1) PISTON RINGS 100 DIA to part no: 072404039 Qty-300 nos (2) OBS PISTON RING DIA 60 to part no: 022401039 Qty-150 nos. (Compressor is a CLW approved item with UVAM ID: 2100711)

Earth Shunt assembly for Hitachi TM to body as per Drg.No: B/TRS/TM/3/396 Alt-B, Ref. 1,2,3 & 4 or latest if any. NOTE: One sample should be got approved before effecting bulk supply.

WIRE STEEL MILD ANNEALED FOR GENL ENGG PURPOSE SIZE 2.0 mm(145WG) SPECIFICATION IS 280 (SOFT).