e-Municipalities - eServices to citizens and Employees Tender Results

Long Handle Drainage Cleaner

brooms

brooms

Truck Chassis Mounted Suction Cum Jetting Machine- Heavy Average Turn Over of Last 3 Years 226 Lakh (s) Experience with Gov. Required 3 Year (s) Truck Chassis Mounted Suction Cum Jetting Machine-Heavy ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Chassis Certification ARAI/VRDE/ICAT Yes * Chassis Certification ARAI/VRDE/ICAT No - * Form 22 A - For compliance with pollution standards, safety standards of components and road worthiness as per CMVR Rules Yes * Conforming to IS:13496 for Suction Machine for cleaning Sewers, Manholes and ancillary structures provided on sewer line and closed storm water drains Yes * 1/8 Conforming to IS:11387 for high pressure jetting machine for sewer cleaning Yes * Availability of test reports for all critical components from the manufacturer or OEM of Jetting Pumps, vacuum pumps, power takeoff unit, Jetting Hose etc shall be from any ILAC/NABL accredited/Central Govt Lab to be furnished to buyers on demand Yes * Registration To Local RTO (Regional Transport Office)/RTA(Regional Transport Authority) By Seller - * NGT approval needs to be provided bu the Govt department - * Generic Parameters Make and Model of Vacuum Pump - * Make and Model of Jetting Pump - * Make and Model of Jetting Hose - * Make and Model of PTO - * Make and Model of Hydraulic Motor - * Make and Model of Hydraulic Pump - * Make and Model of Suction Hose - * Make and Model of Jetting Nose - * Chassis Make and Model - * Chassis Model Number - * Chassis Type Heavy Motor Vehicle * Type of Fuel Diesel Diesel, CNG Chassis Gross Vehicle Weight 16200 Any applicable numeric value 2/8 Kerb Weight 6200 Any applicable numeric value Engine Capacity (cc) 5700 * Pay Load Capacity (Tonne Load) 16 Any applicable numeric value Vehicle Emission Compliance BS-IV BS-IV Engine BHP 170 Any applicable numeric value Engine Torque Max@rpm 660 Any applicable numeric value Maximum Speed of Vehicle(KM/Hr) 80 * No of Speed/Forward Gears 6 * Braking Distance 1 * Gradeability of Vehicle (%) 26 Any applicable numeric value Wheel Base 4300 Any applicable numeric value Engine Aspiration System Turbocharged Intercooler * Mount Type Truck Mounted Unit * Fuel Tank Capacity 395 Any applicable numeric value Constructional Parameters Capacity of Split Shaft PTO of the vehicle (kgm) - Any applicable numeric value Overall Length 4315 * Overall Width 2007 * Equipment Length 5065 * Equipment Height 1400 * Equipment Rear Over Hang Yes * If Yes, Declare Equipment Rear Over Hang 625 * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Derrick Arm Available No * Vacuum Pump - Rotary Vane/Sliding Vane Yes * 3/8 Type Of Cooling - * Vacuum Pump Flow (cum/hr) - Any applicable numeric value Vacuum Pump Power (hp@rpm) - * Vacuum Relief Valve Size 1.5 * Vacuum Suction Depth 8 * Suction Hose - Lightweight, heavy duty, reinforced, PVC along with quick connect coupling arrangement Yes * Suction Hose Internal Diameter - * Suction Hose Length 15 * Number of Suction Hose (Nos) 5 * Safety Equipments - * Silencer/Filter(Micro Strainer) Yes * Exhaust Silencer and injection cooling air Inlet Silencer/Filter Yes * Blower Outlet and Air- Exhaust Silencer Yes * Check valve Yes * Vacuum Limitation Valve Yes * Drain Off valve Yes * High Pressure Jetting Pump With pressure regulating Arrangement Yes Yes Jetting Pump - Triplex plunger reciprocating pump Yes * Working Pressure Range of Jetting Pump 155 150-200 Water Flow for Pump of Jetting Machine (LPM) 263 Any applicable numeric value Pressure Relief Valve Size 2 * 4/8 Jetting hose inner Diameter (Capable of withstanding one point five times the maximum pressure generated by the pump) 25 * Jetting Hose Length 100 * Number of Nozzles for removing Blockage (Conical Head) 1 * Number of Nozzles for Flushing Sewer lines( Round Head) 1 * Number of balanced Nozzles for dry silt 1 * Water storage Tank Capacity 5000 5000 Sludge Storage Tank capacity 3000 3000 Total Tank Capacity 8000 8000 Maximum working pressure of Jetting Hose 230 * Minimum Burst pressure of Jetting Hose 520 * Thickness of tank plate of SS 304 with proper re inforcement to withstand the required forces 6 * Material of tank Yes Steel of Grade SS-304, Mild Steel ( Grade -A ) confirming IS 2062 latest Surface preparation and finish of tank's Exterior - sanded prior to spray painting and spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint Yes * Surface preparation and finish of Tank's Interior - clean water two coats anti corrosive primer & two coats of Yes * 5/8 grey enamel paint & Sludge shall be with two coats of epoxy paint to resist corrosion Provision for locking and unlocking arrangement of rear gate of tank, to be operated hydraulically for quick tipping and cleaning Yes * Hose Reel Drive operated by hydraulic motor Yes * Dished Head Yes * Tank Rear Door Opening by hydraulic system Yes * Reinforcement rings in pipes Yes * Hydraulic Pump Type Gear Type * Water Level Indicator Type (with safety coverage) - * Water Level Indicator Nos 2 * Thickness of Cover for Engine, Pump and Hose Reel compartment 3 * Material of Cover for Engine, Pump and Hose Reel compartment Galvanised IronSheet * Full bore Quick Acting Valves in the sewage path Yes * Air Pumps to safeguard the pump from overloading Yes * Make and Model of Air Pump - * Sludge Trap between the Air Pump and the Tank Yes * Float cut out valve to seal the pump suction line Yes * Lubricating system for reducing friction loss Yes * 6/8 Three sewer cleaning nozzles with varying rearward angles Yes * One nozzle extension for easy fixing of the hose and the nozzle Yes * Two stop tank strainer elements Yes * Two sets of operation and service manuals and spare parts lists Yes * Hose guide Yes * Counter Yes * Essential Spares Set of seal kit for Hydraulic Cylinder Yes Yes Set of seal kit for Hydraulic Motors Yes Yes Set of seal kit for Hydraulic Pumps Yes Yes Set of Filters for Hydraulic Systems Yes Yes Suction hose 30mtr and Jetting hose 120mtr Yes Yes Performance Parameters Warranty Time 24 Any applicable numeric value Warranty Distance 50000 * No of Free Service (Minimum 3 per year) Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra 221002, Pannalal Park, Raja Uday Pratap Marg. 1 15

refuse compactor Average Turn Over of Last 3 Years 386 Lakh (s) Experience with Gov. Required 3 Year (s) Refuse Compactor ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5760 * Model No. - * Pay Load Capacity (Tonn Load) 9 1-50 Type of Fuel Diesel Diesel, CNG Vehicle Emission Compliance BS-IV BS-IV Colour (Cabin) of the Vehicle - * Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hours) 2 Any applicable numeric value Max Engine BHP 180 Any applicable numeric 1/6 value Max Engine Torque (N-m) 660 Any applicable numeric value Top Speed (Kmph) 80 Any applicable numeric value Braking Distance (m) 10 Any applicable numeric value Gradeability of Vehicle (%) 31 Any applicable numeric value Engine Aspiration System Turbocharged Intercooled Natural, Supercharged, TurboCharged, Turbocharged Intercooled Type of chassis for Vehicle - * Fuel Tank Capacity (Ltrs) 400 Any applicable numeric value Type of Cabin - * Load Body Type - * Trailer Type - * Ground Clearance (mm) 253 Any applicable numeric value Floor Area (mm2) 7.1 Any applicable numeric value Wheel Base (mm) 4330 Any applicable numeric value Kerb Weight (Kg) 4815 Any applicable numeric value Gross Vehicle Weight (Kg) 16200 Any applicable numeric value Type of Vehicle Tyre Tube Tube, Tubeless, Radial, Bias No. of Front Tyre 2 Any applicable numeric value No. of Rear Tyre 4 Any applicable numeric value Size Of BIS marked Front Tyre with Ply Rating - * Size of BIS marked Rear Tyre with Ply Rating - * Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear Front, Rear, All 2/6 No of Axle 2 Any applicable numeric value Axle Configuration ( No of Outside Tyre x No of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * No. of Speed Forward Gears 6 Any applicable numeric value Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 8300 Any applicable numeric value Type of Clutch - * Type of Front Brakes - * Type of Rear Brakes - * CERTIFICATION Vehicle Certification ARAI/VRDE/ICAT No - * Constructional Parameters Overall Length (mm) 7788 Any applicable numeric value Overall Width (mm) 2432 Any applicable numeric value Overall Height (cabin) (mm) 3200 Any applicable numeric value Type and Location of Shock Absorbers - * Container Capacity(excluding hopper) (m3) 14 Any applicable numeric value Color (Container) - * Container Body Material - * Roof panel thickness (mm) 4 Any applicable numeric value Side Panel thickness (mm) 4 Any applicable numeric value Floor thickness (mm) 4 Any applicable numeric value Hopper Capacity (m3) 1.75 Any applicable numeric value Sewager Tank volume (Ltrs) 0 Any applicable numeric value Compression ratio 2 Any applicable numeric 3/6 value Universal bin lifting system Yes Yes Dumper placer arms system Yes Yes Tip cart/bin cart lifing system Yes Yes Discharge model Horizontal Ejection Horizontal Ejection Control Electrically Hydraulic control Electrically Hydraulic control, Manual Hydraulic control Emergency Stop Button Hopper's Both Sides Hopper's Both Sides Alarm (buzzer) true true, false Stabilizers type - * Power take Off (PTO) type - * PTO shaft rotation for hydraulic pump maximum pressure generation (rpm) 1500 Any applicable numeric value Manufacturer of Hydraullic system - * Replaceble filter provided in the hydraulic system return line Yes Yes Maximum pressure developed by hydraulic pump (bar) 240 Any applicable numeric value Maximum Hydraulic fliud circulation rate of hydraulic pump (lpm@rpm) 87 Any applicable numeric value Performance Parameters Lift time (second) 28 Any applicable numeric value Work cycle time (second) 35 Any applicable numeric value Discharge time (second) 20 Any applicable numeric value Lift capacity (Kg) 1000 Any applicable numeric value Max compression force (Tonnes) 0.34 Any applicable numeric value Warranty Time (Months) 12 12, 24, 36 4/6 Warranty Distance (km)unlimited during warranty period 100000 Any applicable numeric value No. of Free Service 3 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra 221002, Pannalal Park, Raja Uday Pratap Marg. 3 30

Desktops, Multifunction Machines, Line Intractive UPS with AVR Desktops ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7500 (3.4 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7500 (3.4 GHz, 4 Cores) Motherboard Chipset Intel H110 Intel H110 Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 1 - Expansion Slots (PCIe x 16) (Number) 0 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Professional RAM Type of RAM DDR 4 - RAM Size (GB) 8 8 RAM Expandability upto (GB) 32 16, 32, 64 1/7 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) 21.5 - Internal Bays 1 - External Bays (Number) 0 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 2 - USB Port 3.0 (Number) 2 - Serial Port false - Parallel Port false - VGA true - HDMI true - Display Port false - Monitor Monitor Size (INCHES) 18.5 18.5 Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification TCO 7.0 - Power Power Supply (Watt) 180 - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker true - On Site OEM Warranty (Year) 3 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity 2/7 S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 8 15 Multifunction Machines ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Type of Machine Multifunction Machine - Print Technology Laser Inkjet, Laser Cartridge Technology With Composite Cartridge With Composite Cartridge Type of Printing Mono Mono Platen/Flatbed Size A4 A3, A4, Legal Paper Size (Original/Image) A4/A4 A3/A3, A4/A4, Legal/Leg al RAM size (MB) 8 - Hard Disk Capacity(GB) 0 Minimum Speed per Minute in A4 Size- Mono (PPM) 18 18 Minimum Speed per Minute in A4 Size- Colour (PPM) 0 Minimum Speed per Minute in A3 Size- Mono(PPM) 00.00 - Minimum Speed per Minute in A3 Size- Colour(PPM) 00.00 - Scanning Feature Availability Yes Yes, No Duplexing Feature Availability Yes Yes, No Networking Feature Availability No Yes, No If yes, Network Interface NA - Faxing Feature Availability No Yes, No Speed of Fax, If Fax Feature is available NA - 3/7 Original Feed Type Platen Platen, ADF, DADF/RADF, SPDF Feeder Capacity (Number) 150 - Wi-Fi Capability No Yes, Wi-Fi Type NA - Number of Main Tray(Number) 3 Total Main Tray Capacity 3 - Bypass Facility No - Bypass Tray Capacity 0 - Yield of the cartridge/Ink Tank/Ink Pack (for C, M, Y & K individually) supplied with Machine(Number of prints) 1500 - Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology(Number of Prints) NA - Duty Cycle/Month (Number of Prints) 8000 - BIS Registration under CRS of Meity Yes - BIS Registration Number R-41001554 - Operating Temperature Range (Degree C) 10 - Operating Humidity (%RH) 80 - On Site OEM Warranty (Year) 3 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 8 15 4/7 Line Intractive UPS With AVR ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single Phase Quasi-Sin- wave 230 V AC, 50 Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) No Yes, No Inverter out put socket AC out put for printer (not through inverter) Not applicable 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - 5/7 Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date T&M-0111 - Name Of Lab ETDC - Address of Lab MUMBAI - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. 6/7 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 8 15 Required No ePBG Required No

hopper or tipper Average Turn Over of Last 3 Years 400 Lakh (s) Hopper Or Tipper ( 118 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 702 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis without facecowl * 1/6 Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 2.79 Any applicable numeric value Speed, Max (Km/Hr) 60 * Max Engine Power BHP (BHP@rpm) 16 Any applicable numeric value Max Engine Torque (N-M@rpm) 39 Any applicable numeric value Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Any applicable numeric value Fuel Tank Capacity (Ltrs) 30 Any applicable numeric value Gradeability of Vehicle with load( %) 16.38 * Gradeability of Vehicle without load ( %) 18 * Ground Clearance (mm) 160 Any applicable numeric value Wheel Base (mm) 2100 * Kerb Weight (Kg) 720 Any applicable numeric value Gross Vehicle Weight (Kg) 1700 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Radial * 2/6 Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 * Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Any applicable numeric value Speed Governers No * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 75 45-9999999 Tipper Container cap acity/Volume(cubic metres) 1.8 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 * Width of Chassis (mm) 1500 * Height of Chassis (mm) 1845 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 304.8 Any applicable numeric value Overall Height of Tipper from Ground (mm) 1700 * Body Plate Thickness (mm) 2 1.5-9999999 3/6 Main Frame Thickness (mm) 5 Any applicable numeric value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 1210 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight false * 4/6 If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Kumar 211001, 1 Sarojini Naidu Marg Allahabad 118 50

hopper or tipper Average Turn Over of Last 3 Years 300 Lakh (s) Hopper Or Tipper ( 117 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/5 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - 2/5 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 85 Tipper Container cap acity/Volume(cubic metres) 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 735 - Overall Height of Tipper from Ground (mm) 1518 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - 3/5 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 1012 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Satish Kumar 211001, 1 Sarojini Naidu Marg Allahabad 117 75

LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 5 Year (s) LED Luminaire (For Road And Street Lights) ( 1015 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W 45W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 5 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - 2/7 Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - 3/7 Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 100 cm 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - 4/7 Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological Yes - 5/7 report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bheem Rao 244221, OFFICE OF EXECUTIVE OFFICER NAGAR PALIKA PARISHAD AMROHA NEAR KOT CHAURAHA DISTRICT AMROHA 1015 15

LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 32 Lakh (s) Experience with Gov. Required 5 Year (s) LED Luminaire (For Road And Street Lights) ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 90W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 5 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - 2/7 Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - 3/7 Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 2 Nos. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 100 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - 4/7 Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological Yes - 5/7 report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baijnath Prajapati 210301, Nagar Palika Parishad Hamirpur Uttar Pradesh 100 15

Mobile Toilet

Crawler Hydraulic Excavator

Crawler Hydraulic Excavator

Wheeled Skid Steer Loader

built up trucks Average Turn Over of Last 3 Years 80 Lakh (s) Built Up Trucks ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5760.0 - Model No U 2518 Pay Load Capacity (Tonne Load) 15.0 Type of chassis for Vehicle 2518 Tipper - Chassis with Built up Cabin true Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle Yellow - Engine BHP@rpm (hp@rpm) 177@2400rpm Engine Torque Max@rpm (Engine Torque Max@rpm) 660NM@1200-1900rpm Top Speed (Kmph) 80.0 - Braking Distance (m) 10.0 - 1/4 Gradeability of Vehicle (%) 37 Engine Aspiration System TurboCharged Natural, Supercharged, T urboCharged, Turbochar ged Intercooled Fuel Tank Capacity (Ltrs) 212.0 - Load Body Type 14 CuM Tipper - Trailer Type nil - Ground Clearance (mm) 260.0 Floor Area (sq. mm) na - Wheel Base (mm) 3900.0 Kerb Weight (Kg) 8300.0 Gross Vehicle Weight (Kg) 25000.0 Type of Vehicle Tyre Radial Tube, Tubeless, Radial, Bi as Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear - No of Axle (Nos) 3.0 - Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 6x4 - Type of Front Axle and Suspension System Semi Elliptical Multileaf - Type of Rear Axle and Suspension System Semi elliptical multileaf - No. of Speed/Forward Gears 6 - Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 9000.0 - Type of Clutch Single plate dry type - Type of Front Brakes Drum - Type of Rear Brakes Drum - Certification Vehicle Certification ARAI/VRDE/ICAT No ARAI- AAKN0082 Constructional Parameters Type of Cabin Day cabin - Overall Length (mm) 6870.0 - Overall Width (mm) 2445.0 - 2/4 Overall Height (Cabin) (mm) 3200.0 - Type and Location of Shock Absorbers Semi electrical Multileaf in front and rear - No of Front Tyre (Nos) 1.0 - No of Rear Tyre (Nos) 2.0 - Size Of BIS marked Front Tyre with Ply Rating 10.00X 20-16PR Radial - Size of BIS marked Rear Tyre with Ply Rating 10.00X20- 16PR RADIAL Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 4.0 Warranty Distance (Km)unlimited during warranty period 100000.0 Warranty Time (Months) 12.0 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 18.0 - No of Free Service (Nos) 3.0 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Kumar 211001, 1 Sarojini Naidu Marg Allahabad 5 60

hopper or tipper Hopper Or Tipper ( 21 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 21.5 1/6 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Max Engine Power BHP (BHP@rpm) 16 Max Engine Torque (N-M@rpm) 37.5 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 21 - Gradeability of Vehicle without load ( %) 21 - Ground Clearance (mm) 175 Wheel Base (mm) 2100 - Kerb Weight (Kg) 840 Gross Vehicle Weight (Kg) 1550 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated 2/6 Turning Radius, Min (mm) 8600 Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.8 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 145 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 735 - Overall Height of Tipper from Ground (mm) 1518 - Body Plate Thickness (mm) 1.6 Main Frame 5 3/6 Thickness (mm) Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 450 450.0 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - 4/6 Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bheem Rao 244221, OFFICE OF EXECUTIVE OFFICER NAGAR PALIKA PARISHAD AMROHA NEAR KOT CHAURAHA DISTRICT AMROHA 21 15

LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 47 Lakh (s) Experience with Gov. Required 10 Year (s) LED Luminaire (For Road And Street Lights) ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 45W 45W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP67 - Warranty for free replacement (in years) 5 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - 2/7 Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -10 deg C to +55 deg C -10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be Yes - 3/7 provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - 4/7 Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated Yes - 5/7 lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shailendra Kumar Singh 250406, NAGAR PANCHAYAT OFFICE, MAIN ROAD PARIKSHITGARH, MEERUT, UP 300 15

backhoes

backhoes

refuse compactor Average Turn Over of Last 3 Years 800 Lakh (s) Refuse Compactor ( 40 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 5760 - Model No. - - Pay Load Capacity (Tonn Load) 16 Type of Fuel Diesel Diesel, CNG Vehicle Emission Compliance BS-IV BS-IV Colour (Cabin) of the Vehicle - - Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hours) 2 Max Engine BHP 180 Max Engine Torque (N-m) 660 Top Speed (Kmph) 60 Braking Distance (m) 50 1/5 Gradeability of Vehicle (%) 22 Engine Aspiration System Turbocharged Intercooled Natural, Supercharged, TurboCharged, Turbocharged Intercooled Type of chassis for Vehicle - - Fuel Tank Capacity (Ltrs) 300 Type of Cabin - - Load Body Type - - Trailer Type - - Ground Clearance (mm) 260 Floor Area (mm2) 0 Wheel Base (mm) 4902 Kerb Weight (Kg) 8295 Gross Vehicle Weight (Kg) 25000 Type of Vehicle Tyre Tube Tube, Tubeless, Radial, Bias No. of Front Tyre 2 No. of Rear Tyre 4 Size Of BIS marked Front Tyre with Ply Rating - - Size of BIS marked Rear Tyre with Ply Rating - - Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear Front, Rear, All No of Axle 3 Axle Configuration ( No of Outside Tyre x No of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - No. of Speed Forward Gears 6 Type of Steering Power Operated Manual, Power 2/5 Operated Turning Radius (mm) 8750 Type of Clutch - - Type of Front Brakes - - Type of Rear Brakes - - CERTIFICATION Vehicle Certification ARAI/VRDE/ICAT No - - Constructional Parameters Overall Length (mm) 9665 Overall Width (mm) 2432 Overall Height (cabin) (mm) 3200 Type and Location of Shock Absorbers - - Container Capacity(excluding hopper) (m3) 18 Color (Container) - - Container Body Material - - Roof panel thickness (mm) 4 Side Panel thickness (mm) 4 Floor thickness (mm) 4 Hopper Capacity (m3) 1.75 Sewager Tank volume (Ltrs) 0 Compression ratio 2 Universal bin lifting system Yes Yes Dumper placer arms system Yes Yes Tip cart/bin cart lifing system Yes Yes Discharge model Horizontal Ejection Horizontal Ejection Control Electrically Hydraulic control Electrically Hydraulic control, Manual Hydraulic control Emergency Stop Button Hopper's Both Sides Hopper's Both Sides Alarm (buzzer) true true, false Stabilizers type - - 3/5 Power take Off (PTO) type - - PTO shaft rotation for hydraulic pump maximum pressure generation (rpm) 1500 Manufacturer of Hydraullic system - - Replaceble filter provided in the hydraulic system return line Yes Yes Maximum pressure developed by hydraulic pump (bar) 70 Maximum Hydraulic fliud circulation rate of hydraulic pump (lpm@rpm) 87 Performance Parameters Lift time (second) 28 Work cycle time (second) 35 Discharge time (second) 20 Lift capacity (Kg) 1000 Max compression force (Tonnes) 0.34 Warranty Time (Months) 12 12, 24, 36 Warranty Distance (km)unlimited during warranty period 100000 No. of Free Service 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Kumar 211001, 1 Sarojini Naidu Marg Allahabad 40 90

backhoes

line matrix printer Line Matrix Printer ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Type of Line Matrix Printer Standard Standard, High Definition Print Method Impact Line Matrix - Type of Enclosure Cabinet - Print Speed of Standard LMP ( High Speed Draft Mode, Upper Case ) (Lines per minute) 1000 1000 Print Speed at 180 x 180 dpi ( For High Definition LMP) (Inches per minute) NA 36, 64, 79, NA Graphic Resolution (Horizontal) (Dots per inch) 180 - Graphic Resolution (Vertical) (Dots per inch) 144 - Print Width (Column) (Number) 136 - Acoustics (Noise level while printing) (dBA) 50 - 1/3 Forms Handling/Paper Hadling Continuous, Fan Folded, Edge perforated - Media Width Handling (Minimum to Maximum) (mm) 7.5" to 16" - Fonts Supported NLQ Serif, NLQ Sans Serif, Data Processing, High Speed, OCR A, OCR B. Printer should support High yield cartridges with 30000 pages or above. - Print Attributes Bold, italic, double wide, double high, overstrike, underline, subscript and superscript. The printer should have power print option - Printer Support Softwares The printer should have power print option & inbuilt network administrative tool. Printronix PrintNet Enterprise remote management software, SAP device support - Mean Time Between Failure ((POH) Power On Hours) 10000 - Serial port (Nos.) 1 - Parallel Port (Nos.) 1 - Ethernet Port (Nos.) 1 - USB Port (Nos.) 1 - Mean Time Between Failure (MTBF) 10000 - Power supply 230 V AC - Power consumption in Standby Mode (Watt) 5 - Power consumption in Operating Mode (Watt) 320 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Overall Dimensions (L x W x H) (mm x mm x mm) 1028.7 x 685.8 x 736.6 - 2/3 Weight (Kg) 90.7 - Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab showing Conformity to the specifications Yes - if Yes, Test Report Number - - If Yes, Test Report Date - - If Yes, Name of Test Lab - - If Yes, Address of the Test Lab - - Free installation and demonstration Yes - On Site OEM Warranty (Years) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 1 15 Required No ePBG Required No

tractors

hopper or tipper Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 670 - Overall Height of Tipper from Ground (mm) 1489 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 352 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Rajesh 246745, nagar panchayat sahaspur district bijnor 1 15

tractors

built up trucks Average Turn Over of Last 3 Years 75 Lakh (s) Built Up Trucks ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 3840.0 - Model No Ecomet1012 Pay Load Capacity (Tonne Load) 6.5 Type of chassis for Vehicle Tipper - Chassis with Built up Cabin true Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince BS-IV BS-IV, BS-III (Only For Defence) Colour of the Vehicle Blue - Engine BHP@rpm (hp@rpm) 127 @ 2400rpm Engine Torque Max@rpm (Engine Torque Max@rpm) 450 NM @1250-2000rpm Top Speed (Kmph) 80.0 - Braking Distance (m) 0.0 - 1/4 Gradeability of Vehicle (%) 36 Engine Aspiration System TurboCharged Natural, Supercharged, T urboCharged, Turbochar ged Intercooled Fuel Tank Capacity (Ltrs) 105.0 - Load Body Type Fully built Tipper - Trailer Type nil - Ground Clearance (mm) 215.0 Floor Area (sq. mm) 7.1 - Wheel Base (mm) 2850.0 Kerb Weight (Kg) 4750.0 Gross Vehicle Weight (Kg) 10900.0 Type of Vehicle Tyre Tube Tube, Tubeless, Radial, Bi as Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear - No of Axle (Nos) 2.0 - Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Semi elliptical Multileaf - Type of Rear Axle and Suspension System Semi elliptical multileaf - No. of Speed/Forward Gears 6 - Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 5300.0 - Type of Clutch Single plate dry type - Type of Front Brakes Drum - Type of Rear Brakes Drum - Certification Vehicle Certification ARAI/VRDE/ICAT No ARAI-AAHN0017 Constructional Parameters Type of Cabin Day cabin - Overall Length (mm) 5332.0 - Overall Width (mm) 2280.0 - 2/4 Overall Height (Cabin) (mm) 2840.0 - Type and Location of Shock Absorbers Semi electrical Multileaf in front and rear - No of Front Tyre (Nos) 2.0 - No of Rear Tyre (Nos) 4.0 - Size Of BIS marked Front Tyre with Ply Rating 8.25 x 16 -16PR - Size of BIS marked Rear Tyre with Ply Rating 8.25X16-16PR Performance Parameters Vehicle Mileage ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Km/Ltr) 5.0 Warranty Distance (Km)unlimited during warranty period 100000.0 Warranty Time (Months) 12.0 12, 24, 36, 48 Transportation Charge in Rupees Per Km (Rs/Km) 18.0 - No of Free Service (Nos) 3.0 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Kumar 211001, 1 Sarojini Naidu Marg Allahabad 10 60

Utility Vehicles

ambulances

Desktops, Printer, Line Intractive UPS with AVR, Multifunction Machines, Desktops Desktops ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) Intel Core i7-7700 (3.6 GHz, 4 Cores) Motherboard Chipset Intel H110 Intel H110 Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory 2GB - Operating System Operating System (Pre-Loaded) Windows 10 Home Windows 10 Home RAM Type of RAM DDR 4 - RAM Size (GB) 16 16 RAM Expandability upto (GB) 32 16, 32, 64 1/10 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 1 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port false - Monitor Monitor Size (INCHES) 18.5 18.5, 19.5, 21.5, 24, 27 Monitor Resolution (PIXELS) 1440 x 900 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker false - On Site OEM Warranty (Year) 3 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity 2/10 S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 2 15 Printer ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Printing Technology inkjet - Cartridge Technology Ink Ink Type of printing Colour - Paper Size A4 - Print Speed (A4) - Mono (PPM) 33 - Print Speed (A4) - Color (PPM) 15 - Resolution (Dpi) 5760*1440 - Memory (MB) 0 500, 2000 Hard Disk Capacity (GB) 0 - Processor Speed (Mhz) 0 16, 64 Duplexing Feature No - Duplex Print Speed (PPM/IPM) 0 - Network Connectivity yes Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program Network Interface, if available Ethernet 10/100 - Wireless Connectivity yes - If Yes, Type of Connectivity Wi-fi Direct - USB Port yes Intel, AMD Paper Tray Capacity 100 - Number of Paper Trays 1 - Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 1 - 3/10 Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 30000 - Duty Cycle/month (No of Prints) 0 - Operating Temperature Range (Degree C) na - Operating Humidity (RH) (In %) na - Dimensions(In mm x mm x mm ) 484*377*226 - Weight (In kg) 602 - BIS Registration under CRS of Meity Yes - BIS Registration no R-41000620 - On site OEM warranty (Years) 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 2 15 Line Intractive UPS With AVR ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.5/84 - Technology MOSFET-PWM - Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 composite, separate toner and drum, Ink Rated Output (Volt) Single phase sinewave 230v AC, 50Hz - Degree of protection IP-21 - Inverter Efficiency (%) >/= 60% - Warranty for the battery from the date 1 year - 4/10 of delivery Warranty for Line Interactive UPS 1 Year - Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for printer (not through inverter) Yes mono, Colour Inverter out put socket AC out put for printer (not through inverter) 2 Three pin - FUNCTIONAL Total harmonic distorsion (%) </= 40% inkjet, Laser Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% A4, A3 Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against Yes 1, 3, 5 5/10 short circuit of UPS Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date R41015903 - Name Of Lab BIS - Address of Lab NEW DELHI - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 2 15 Multifunction Machines ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Type of Machine Multifunction Machine - Print Technology Laser - Cartridge Technology With Composite Cartridge - Type of Printing Mono - Platen/Flatbed Size A4 - 6/10 Paper Size (Original/Image) A4/A4 - RAM size (MB) 256 - Hard Disk Capacity(GB) 0 Minimum Speed per Minute in A4 Size-Mono (PPM) 38 - Minimum Speed per Minute in A4 Size- Colour (PPM) 0 - Minimum Speed per Minute in A3 Size- Mono(PPM) 38 - Minimum Speed per Minute in A3 Size- Colour(PPM) 38 - Scanning Feature Availability Yes - Duplexing Feature Availability Yes - Networking Feature Availability Yes - If yes, Network Interface Ethernet 10/100 - Faxing Feature Availability Yes - Speed of Fax, If Fax Feature is available 33.6 kbps - Original Feed Type DADF/RADF composite, Ink Feeder Capacity (Number) 250 - Wi-Fi Capability No - If yes, Wi-Fi Type NA - Number of Main Tray(Number) 2 - Total Main Tray Capacity 350 - Bypass Facility No - Bypass Tray Capacity 0 - Yield of the cartridge/Ink Tank/Ink Pack (for C, M, Y & K individually) supplied with Machine(Number HP 28A Black LaserJet Toner Cartridge(CF228A) + Compatible Printers ~ 3, 000 pgs, HP 28X - 7/10 of prints) Black LaserJet Toner Cartridge(CF228X) + Compatible Printers ~ 9, 200 pgs Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology(Number of Prints) 0 - Duty Cycle/Month (Number of Prints) 80000 - BIS Registration under CRS of Meity Yes - BIS Registration Number R-41048852 - Operating Temperature Range (Degree C) 32.5 - Operating Humidity (%RH) 30 to 70% RH - On Site OEM Warranty (Year) 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 3 15 Desktops ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel >/= 60%, >/= 70% Processor Generation 7th SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Motherboard Chipset Intel H110 2 Three pin, 3 Three pin, Hard wiring, Not applicable Expansion Slots (PCIe x 1) (Number) 1 - 8/10 Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre- Loaded) Windows 10 Home - RAM Type of RAM DDR 4 - RAM Size (GB) 4 - RAM Expandability upto (GB) 32 - RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 - Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 2 - External Bays (Number) 1 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 2 - Serial Port true - Parallel Port false - VGA true - HDMI true - Display Port false - Monitor Monitor Size (INCHES) 18.5 - Monitor Resolution (PIXELS) 1366x768 - Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - 9/10 Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker true - On Site OEM Warranty (Year) 3 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 PREM KRISHNA SRIVASTAVA 226001, tirlok nath road lalbagh 2 15 EMD Required No ePBG Required No

tractors

backhoes

traffic signs - bilinker light Traffic Signs - Bilinker Light ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values Construction Construction Single piece metal (min 3 mm thick) cabinet with thick Black powder coating WITH polycarbonate front glass. Provided with hooks for hanging - Dimension Length (cm) 12 Height (cm) 2.5 Width (cm) 12 Physical Characteristics Display (Colour Plate) As per user requirement - Front glass shall be heat and shock resistance and should not break if water droplets fall on it while the blinker in use Yes - Auto Flashing feature with variable ON/OFF Yes - Adjustment for reducing intensity of LED Yes - Light Sensor to OFF the Yes - 1/3 blinker in day and ON in dark Single button to activate and deactivate the blinker Yes - Ingress protection IP 65 or better - Operating environment up to 95 R.H at 40 degree C - Battery Details Built in battery/capacity (Maintenance free battery) SMF lead acid/12V/7Ah SMF lead acid 12V/7Ah, SMF lead acid/12V/9Ah Battery charging time (Maximum) (hours) 6 - Battery Back-up time with continuous flashing (hrs) 36 Input Power 230 V +/- 10, 50 Hz AC - Warranty Warranty (Years) 3 3, 5 Test Report Details Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab covering all the parameters as per specifications Yes Yes, No Test Report Number 2934160204GENN1035 - Test Report Date 12-2-2016 - Name of Test Lab Delhi test house - Address of the Test Lab A62/3, GT karnal road, Industrail area, azadpur, Delhi - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abdul Qadir 250104, Office Nagar Panchayat Kithaur mawana road Kithaur 200 15 EMD Required No ePBG Required No 2/3

hopper or tipper Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 40 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Box body Tipper - Main Engine Capacity (cc) 1396 Make of Chassis Tata Motors Type of Chassis Frame Ladder type cranked frame with inverted hat section long members & welded cross members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles 1/6 Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 71 BHP @ 4000RPM - Engine Torque Max, @ rpm (N- M@rpm) 140 Nm @ 1800-3000 RPM Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Independent, strut type - Type of Rear Axle and Suspension System Semi-elliptic leaf spring - Type of BIS MARKED Vehicle Tyre Radial - 2/6 Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disc Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated - Rear Vehicle Brake Drum Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated, LSPV Fitted on Rear Brakes. Type of Clutch 200 mm, Single Plate Dry Friction Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) 165 R14 LT 8PR - Size Of Rear Tyres (mm) 165 R14 LT 8PR - 3/6 Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or Equivalent Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) No Auxiliary Diesel Engine Transmission 0.0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - 4/6 Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ali Hasan Qurney 250002, Kaiser ganj ghanta ghar Meerut city 40 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 503383 ePBG Advisory Bank HDFC Bank ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 12

hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 1 Year (s) Hopper Or Tipper ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, Box body Tipper - Main Engine Capacity (cc) 1396 Make of Chassis Tata Motors Type of Chassis Frame Ladder type cranked frame with inverted hat section long members & welded cross members Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles 1/6 Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Power BHP@rpm (BHP@rpm) 71 BHP @ 4000RPM - Engine Torque Max, @ rpm (N- M@rpm) 140 Nm @ 1800-3000 RPM Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4x2 - Type of Front Axle and Suspension System Independent, strut type - Type of Rear Axle and Suspension System Semi-elliptic leaf spring - Type of BIS MARKED Vehicle Tyre Radial - 2/6 Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - Front Vehicle Brake Disc Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated - Rear Vehicle Brake Drum Brake - Dual Circuit Vacuum Assisted Hydraulically Actuated, LSPV Fitted on Rear Brakes. Type of Clutch 200 mm, Single Plate Dry Friction Type - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. ARAI Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) 165 R14 LT 8PR - Size Of Rear Tyres (mm) 165 R14 LT 8PR - 3/6 Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) Wipro or Equivalent Make - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) No Auxiliary Diesel Engine Transmission 0.0 Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - 4/6 Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ali Hasan Qurney 250002, Kaiser ganj ghanta ghar Meerut city 5 15 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 62923 ePBG Advisory Bank HDFC Bank ePBG Percentage(%) 5.00 Duration of ePBG required (Months). 1

Public place seating chair Experience with Gov. Required 3 Year (s) Public Place Seating Chair ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest N/A Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 3 N/A Delivery status Knocked Down Supply to be assembeled by Seller on Site N/A Seat Cushion WITH CUSHION N/A Backrest Cushion WITHOUT CUSHION N/A MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest Mild Steel Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 1/4 202, SS 304, MS RECTANGULAR SECTION PIPE Material of Arms armrest are made up of powder coated high pressure aluminium dye cast armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS RECTANGULAR SECTION PIPE Material of Side Bar Bracket made up of chrome plated solid steel N/A Thickness of material of Main Frame in mm 1.4 N/A Thickness of material of Arms in mm 1.3 N/A Type of bolts M8 bolts N/A Thickness of PU Foam for Seat and Backrest ±2(mm) 30 mm N/A Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A N/A Covering Material for Seat and Backrest NA N/A DIMENSION Overall Length in mm (±10 mm) 1200 800, 850, 900, 950, 1000, 1050, 1100, 1150, 1170, 1200, 1225, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1655, 1700, 1760, 1800, 1840, 1900, 1950, 2000, 2050, 2100, 2150, 2200, 1585 Overall Depth in mm ( ±5 mm) 350 350, 400, 450, 500, 550, 6 10, 640, 665, 700, 750, 80 0, 430 Overall Height in mm (±5 mm) 700 400, 600, 6 50, 760, 800, 835, 87 0, 430 Seat Height from Floor in mm (±5 mm) 425 mm N/A 2/4 Thickness of material of Seat and Backrest (mm) 1.6 mm N/A CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) NO YES, NO COLOUR & FINISH Colour of Covering Material red N/A All M S Strucure Finish Powder Coated N/A Colour of Paint red N/A All steel component to be epoxy powder coated NA N/A WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 2 1, 2, 5 MISC Seat and Backrest are Perforated false N/A Adjuster for legs false N/A Arms Chrome Plated false N/A Legs Chrome Plated false N/A Cushion on Arms false N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abdul Qadir 250104, Office Nagar Panchayat Kithaur mawana road Kithaur 60 15 EMD Required No ePBG Required No

Public place seating chair Public Place Seating Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating separate seat and backrest N/A Style without arm and with backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 4 2, 3, 4, 5 Number of arms (Nos) No Arms N/A Delivery status Assembled N/A Seat Cushion WITHOUT CUSHION N/A Backrest Cushion WITHOUT CUSHION N/A MATERIAL Material of Main Frame SS 304 mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest SS 304 Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE 1/4 Material of Arms SS 304 armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs SS 304 cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS RECTANGULAR SECTION PIPE Material of Side Bar Bracket solid steel v-shaped powder coated N/A Thickness of material of Main Frame in mm 1.8 N/A Thickness of material of Arms in mm 1.1 N/A Type of bolts M8 bolts N/A Thickness of PU Foam for Seat and Backrest ±2(mm) N.A N/A Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A N/A Covering Material for Seat and Backrest NA N/A DIMENSION Overall Length in mm (±10 mm) 1700 800, 850, 900, 950, 1000, 1050, 1100, 1150, 1170, 1200, 1225, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1655, 1700, 1760, 1800, 1840, 1900, 1950, 2000, 2050, 2100, 2150, 2200, 1585 Overall Depth in mm ( ±5 mm) 450 350, 400, 450, 500, 550, 6 10, 640, 665, 700, 750, 80 0, 430 Overall Height in mm (±5 mm) 800 400, 600, 6 50, 760, 800, 835, 87 0, 430 Seat Height from Floor in mm (±5 mm) 440 mm N/A Thickness of material of Seat and Backrest (mm) 1.5 mm N/A 2/4 CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) YES YES, NO COLOUR & FINISH Colour of Covering Material N.A N/A All M S Strucure Finish NA N/A Colour of Paint NA N/A All steel component to be epoxy powder coated NA N/A WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true N/A Adjuster for legs false N/A Arms Chrome Plated false N/A Legs Chrome Plated false N/A Cushion on Arms false N/A * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Abdul Qadir 250104, Office Nagar Panchayat Kithaur mawana road Kithaur 30 15 EMD Required No ePBG Required No

buses