ELS/ANGUL/ECOR Tender Results

Feed Valve C2N for Electric locomotives to SIL's Drg. No. 29197201, Rev-02 or FT-1 FTRTIPL Part No.507001700 to Drg.No. 025071025 Rev.1 or Prag Polymers Drg. no. PP.FV.1.00 or M/s Topgrip Drg no. TIC/TG52/FV/052.

Fire retardant cotton insulation tape for electrical purpose size:- 25 mm. width and 0.3 mm. to 0.5 mm thick as per ICF Specification No. ICF/Elec./921.

Set of Graphite Gasket for ELGI TRC1000MNUG Compressor, Each set consisting of Two Items (i) Graphite Gasket flange small as per ELGI Part No: 07040544A-03 Nos/set, & (ii) Graphite Gasket Dia 90 head as per ELGI Part No: 070408090 -05 Nos/set.

Set of MPT kit consisting of (1) Black magnetic ink as per RDSO spec. no RDSO/M&C/NDT/109 (Rev- 2 ) OCT-2020 (Wet method ) in oil media in 420 ml dispenser operating aerosol /container (Net content 400 ml/280 gm). (2) White contrast paint as per BS- 5044-1973 in 420 ml dispenser operating aerosol container (Net content -400 ml/280 gm ) used with visible magnetic particle for wet method inspection in ratio:- 1 (Black) : 2 ( white). (3) Cleaner in 420 ml. Aerosol container (Net content -400 ml/280 gm ).

Conservator Tank (Item No. 6 as per General Arrangement LOT 7775 For three phase loco vide drawing reference No. HSTN 310 675) as per Specification No. CLW/ES/03/0508 for the Main Transformers for Three Phase Electric Locomotives of type WAG9HC.

MR-BC PIPE PALM PACKING RING/COUPLING PACKING RING FOR 1" X 24" HOSE COUPLING TO DRG. NO. TC2GNA/31 R2.

TOH kit for RR20100 CC model compressor ELGI Part No. 072496199 as per annexure attached.

AOH KIT FOR ROTEX MAGNET VALVE MODEL NO.30317V01. Each set consisting of six items:-(1) Seat 'O' Ring, Rotex Part No.19, Qty/Set-2 Nos. (2) Body 'O' Ring, Rotex Part No.18, Qty/Set-2 Nos. (3) Plunger 'O' Ring, Rotex Part No.20, Qty/Set-1 Nos. (4) Guide 'O' Ring, Rotex Part No.21, Qty/Set-1 Nos. (5) Coil Gasket, Rotex Part No.35, Qty/Set-1 Nos. (6) Plunger Assembly, Rotex Part No.30, Qty/Set-1 Nos. Make:- ROTEX.

Kit for FTRTIPL make EBC/5 blending unit consisting of 04 items--(1) 0-Ring, Pt. No.- 006726000A, Qty.=01 No. (2) O-Ring. Pt. No.- 013701000A, Qty.=01 No. (3) Washer Pt. No.-016701000, Qty.=02 Nos. (4) Solenoid Valve Kit. Pt. No.-790013115, Qty.=02 Nos. consists of-[i]special nut Pt. No.-013813500 Qty.=1 No. [ii] core assembly imported Pt. No.- 013201500A Qty.=1 No. [iii] Conical spring Pt. No.-FTO050063003 Qty.=1 No. [iv] O-ring Pt. No.-038705000A Qty.=1 No. [v] O-ring Pt. No.-013711000A Qty.=1 No. [vi] O-ring Pt. No.-013710000A Qty.=1 No. [vii] O-ring Pt. No.- 013703000A Qty.=1 No. Make-FTRTIPL.

Conservator Tank (Item No. 6 as per General Arrangement LOT 7775 For three phase loco vide drawing reference No. HSTN 310 675) as per Specification No. CLW/ES/03/0508 for the Main Transformers for Three Phase Electric Locomotives of type WAG9HC.

Set of different types of self adhesive ECO Solvent Vinyl stickers for WAG-7/WAG-9 Loco of different sizes, quantity, mater and colour as mentioned at Annexure. Material Retro Reflective sheet Adhesive sticker.

LID WITH GASKET FOR FIXED MU EXTERNAL COUPLER TO CEE'S DRG. NO. LOCO/PC/001 MOD-E (SL NO. 1 TO 5).

SET OF MODIFIED ARCING STUD FOR BRUSH HOLDER SIDE AND ROCKER RING SIDE AS PER RDSO DRG.NO.SKEL 4707 ITEM NO.3 & 5. ONE SET CONSISTING OF ITEM NO. 3 QTY. 06 NOS. AND ITEM NO. 5 QTY. 06 NOS.

Tarpaulin 30x15 feet must conform to IS: 2089:1977 with latest amendments.

Air filter Regulator with inbuilt gauge for Schneider makes VCB. Air Regulator + Ext - Gauge, Bracket & Rear Adaptor, Part No: R1000-8-W-T8. Make: CKD.

OH kit for Rotex make 3403 magnet valve. Kit consists of 9 items as per annexure.

ELECTRIC RUBBER HAND GLOVES WITH ISI MARK AS PER IS 13774 (1993),CLASS-3, TEST POTENTIAL - 33000 VOLTS, SIZE 360 - 380 MM LENGTH.

CP DRAIN PLUG PROTECTION GUARD AS PER DRAING NO. M/ELS/RPM/SK-292.

AOH KIT FOR ANEST IWATA COMPRESSOR MODEL RR1750 TO ANEST IWATA PART NO SSPK1616 (KIT CONSISTING OF 20 ITEMS) AS PER ANNEXURE-A.

3/8" Isolating cock W/O Vent OLP as per FTRTIPL Pt. No. 023004100 or Legris Part No. 04021017 or KBIL Part No.C203570.

PCB assembly for FTRTIL Air dryer to FTRTIPL Part no. 780354000, MAKE-FAIVELEY TRANSPORT RAIL TECHNOLOGIES INDIA PRIVATE LIMITED or Part NO. RI/AD11-112 OV of Rasika International-New Delhi or similar.

Set of safety wire rope sling (for Under slung compressor) consisting 02 items - (i) Wire rope sling of length of 3.0 m, dia 8.0 mm, 6 x 19 with steel core as IS: 2762- 2009 and wire rope as per IS:2415-2004 GR-1770 N/mm square, Qty. = 01 No. (ii) Thimble suitable for 8mm (dia) Wire rope as per ELS/TATA's Drg. No.- TATA/RS/Misc/1064.

HP OEM 12A Black LaserJet Toner Cartridge, Model- HP, Model No-M1005 MFP.

Epson 001 Ink bottle colour set (Cyan, Yellow & Magenta).

DISPLAY CARD ASSY [TELPRO(M)-MASTER & SLAVE) AS PER AAL PART NO 3410096200/01 for AAL make speedometer.

Set of S.S Bend Pipe consisting of two items - (1) S.S Bend Pipe Assembly for HETT- 5400 KVA Transformer as per BHEL Drg. No. 34661950036 (2) S.S Elbow Pipe Assembly for HETT-5400 KVA Transformer from RH to Top cover as per BHEL Drg.No. : 44661950085. Rev.- 01.

RC DAMPING PANEL COMPLETE FOR AUXILIARY WINDING OF TFP WITH CAPACITOR CONFORMING TO IS 13648 OR ITS EQUIVALENT MSR FOR USE IN WAP4/WAG5/WAG7 LOCOS. CLW SPECN. NO. CLW/ES/C-47 ALT. I AND DRG. NO. CLW/ES/SK-5/C-47 ALT. I AND RDSO L/NO. EL/3.2.135 DT. 21.03.2013 THE CAPACITORS BEING USED WILL BE OF MAKE ICAR / ITALY MSR 25D-22-50 [22 mfd 550 V] or Yash Capacitor / Nasik YE-001 [25 mfd 660 V] or Advance, Mysore ASPR-15 [25 mfd 660 V].

Axle box Bearing CRU-150 for WAG-9 locos as per CLW's Drg. No. 1209-01.311-061, Alt-1. (Germany SKF No.BC2-0067A or SKF No.BC2-0067D/W33 or NEI No.RB 5080D or FAG No.F-807259.02.ZL).

POWER SUPPLY CARD AS PER AAL PART NO 3410096600/01 for AAL make speedometer type Telpro(M).

A9 Handle assembly for DBC(E-70 brake system for three phase locos) as per M/s. FTRTIPL part No. FT0050398-202.

PGR 200 Teeth as per BTIL Pt. No. 3EYP400905 P0001 or equivalent suitable for TM type 6FRA6068 BTIL propulsion IGBT based 3-phase Locomotives.

Set of Digital Bore Gauges and Snap Gauges as per specification and quantity mentioned at Annexure.

AOH kit for rotex magnet valve model No-30317V01/part No.11ZP10SB06003, 01 set consisting of 06 items 08 nos. (1) Part No.19 , Seat O ring - 2 Nos./Set (2) Part No. 18 , Body O ring - 2 Nos./Set (3) Part No. 20 , Plunger O ring - 1 Nos./Set (4) Part No. 21 , Guide O ring - 1 Nos./Set (5) Part No. 35 , Coil gasket - 1 Nos./Set (6) Part No. 30 , Plunger assembly - 1 Nos./Set MAKE- ROTEX AUTOMATION LTD-VADODRA.

LCD Display Card to Laxven part No: 2000E3-SA- 1001-5 for M/s Laxven make Speedometer type LAX2000E3.

Hose pipe for sander Steel braided OD-15mm, ID-9mm as per Drg. No. ELS/ANGL/T- 96/2025/02.

SAND BOX COVER WITH HINGE FOR WAG-7 LOCO AS PER CLW DRG. NO. 06/1/31/101. REF. NO. 08,09,10,11, 12,14,15, 20 AND 21. COMPLETED DRG. NO. DATED: - 08-01-2016.

Earthing shunt set for bogie frame to body and axel box of WAG-9-HC and WAP-7 loos as per Drg. No. ELS/VSKP/2020/10 Alt-a .Each set consisting of item Sl. no. 1 to 6 of total 108 nos.

LUBRICANT FOR PRESSING OPERATION OF WHEELS/GEARS IN 01(ONE) KG PACK MAKE ARCANOL MOUNTING PASTE 2 OR SIMILAR.

SELF BONDING (AMALGAMATING) INSULATING TAPE OF SIZE 38 MM WIDTH X 0.7 MM THICK IN 4.5 METRE LONG ROLLS FOR THE CABLE HEAD TERMINATION SYSTEM OF LOCO AS PER RDSO SPECIFICATION NO. ELRS/SPEC/BL/0003 REV.1 & AMENDMENT 1, DEC 08. MAKE (1) M/s. SCAPA UK OR (2) M/s. 3 M OR (3) M/s. CANUSA OR (4) M/s JACOBS. LATEST PROOF OF PURCHASE FROM OEM/ AUTHORIZED DEALER TO BE PROVIDED ALONG WITH MATERIAL SUPPLY.

Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 in a set. Visibility - TypeII, Washability - Method C, Sensitivity - Level 2 As per RDSO Spec.No. M and C/NDT/105/2001 of April 2001 or latest [Each Can capacity 500 ml and content 400ml net].

O/H kit of double check valve type 24a consisting of the following (1)`o' ring to wsf's pt.no.j72050/9 ref.4 = 2 nos. (2) `o' ring to wsf's pt.no. j72050/13 ref.5 = 1 no or similar.

HEX HEAD NUT M14X2MM CONFORMING TO IS:1364 GRADE10.

SELF BONDING (AMALGAMATING) INSULATING TAPE OF SIZE 38 MM WIDTH X 0.7 MM THICK IN 4.5 METRE LONG ROLLS FOR THE CABLE HEAD TERMINATION SYSTEM OF LOCO AS PER RDSO SPECIFICATION NO. ELRS/SPEC/BL/0003 REV.1 & AMENDMENT 1, DEC 08. MAKE (1) M/s. SCAPA UK OR (2) M/s. 3 M OR (3) M/s. CANUSA. LATEST PROOF OF PURCHASE FROM OEM/ AUTHORIZED DEALER TO BE PROVIDED ALONG WITH MATERIAL SUPPLY.

PALM REST FOR AIR HOSE MADE OF MILD STEEL AS PER DRG NO:- ELS/ANGL/DRRG/PALM REST FOR HOSE.

HEAVY DUTY WIRE BRUSHES IN SET FOR DELSTAR SCRUBBING & POLISHING MACHINE MODEL SC-MAJOR ONE SET CONSISTING OF THREE BRUSHES. DIAMETER OF PLATE: 300 MM, LENGTH OF WIRE FROM BASE OG THE PLATE: 40 MM, THICKNESS OF WIRE: 2 MM.

Pinion Retaining Plate of Hitachi Traction Motor type HS 15250A for WAG 5 (H), WAG 7 and WAP 4 type Locomotives as per CLW's Drawing No. 4TWD.095.094, Spec/Drg No- As per CLW's Drawing No- 4TWD.095.094.

RUBBER PART KIT OH KIT FOR C2N FEED VALVE SET CONSISTING OF 15 ITEMS AS PER PART NO. AS MENTIONED IN ATTACHED ANNEXURE OR EQUIVALENT.

Complete speed sensor assembly without PGR for IGBT-based locos with 5 plus 3 pin connectors of M/S Bombardier Transport item no. 000010 and part no. 3EYP401277R0001 or Lenord & Bauer type No. 2477Y032B with suitable 5 & 3 pin ITT connectors crimped on both the cables or similar.

12 V 80 AH Lead Acid Battery (Dimension: Length-300 mm, Width- 170 mm, Height- 200 mm) suitable for forklift truck and hydra similar to model no-XP800 Xpress battery of make EXIDE/AMARON/SF/LUMINOUS.

Driver TOOL KIT (Nine Items ) TOOL KIT SET FOR LOCO PILOT FOR CONSISTING SET OF EIGHT ITEMS AND WITH ONE CARRY BAG : (1) HAMMER WITH WOODEN HANDEL - 800 GRAM. (2) ADJUSTABLE PIPE WRENCH SIZE -300 MM. (3) ADJUSTABLE SMALL SPANNER SIZE - 300 MM. (4) CUTTING PLIER SIZE - 200 MM ( 8 `` ). (5) SCREW DRIVER SIZE - 300 MM. (6) CHISEL SIZE - 150 MM. (7) PIN PUNCH SIZE - 150 MM. (8) STANDARD REVERSOR KEY FOR CONVENTION LOCO. (9) CARRY BAG FOR TOOLS SIZE - 16 X 16 INCH. MAKE JHALANI EXPERT, TAPARIA , DINISHA OR SIMILAR.