Loading
Loading…
Loading…
124 results • Latest
COLD CLEANING AGENT (NON REACTIVE WITH METALS)
Adjustable spot light for driver and assistant driver desk illumination (Lamp should be LED based and operating Voltage 110 Volt DC) for locos
Set of cable cleat with din rail for Traction Motor of WAP7 loco to CLW Spec No. CLW/ES/3/0045 Alt-G or Latest.
Eye bolt for MVSL as per ref no.1, 1a, 1b & 1c of drawing No.C/ELS/LGD/AUX/3/20.
Circuit breaker DC supply, Rating-10A 250 V DC, 1 pole NG 125H UI690 V code no. 18705 with auxiliary contact 2 No. code No. 19071 OF/OF NG 125 AVA as per CLW Specn. No. CLW/ES/3/0037 Alt.-H and ABB Doc. No. HBTB 585555R1023.
High oil resistance RC 70C grade nitrile rubber bonded cork-sheet conforming to IS - 4253, Part - II 1980/2008 for MPH Bottom flange gasket as per Drawing no. TRS/ACL/P/622. Thickness 6mm
ACETYLENE GAS DISSOLVED IN CYLINDERS TO IS 308/2024 (Rev.4)
Voltmeter for Traction Motor U1 & U2 as per Spec. No. CLW/ES/I-21 Alt A and with 110 volts LEDillumination for WAP4 & WAG7 Locomotives
FLAT SPLIT COTTER SIZE 6 x 10 x 60 mm TO RDSO Drg. No. SK.VL 584 Alt-2 Ref-29.
Steel Wire brushes for scraping iron and steel Work before painting(for heavy Work), Spec. IRS: Z4-62
PAPER WATER PROOF ELECTRO COATED SILICON CARBIDE 230 X 280 MM GRIT 280 C
Paint remover in aerosole form in suitable packing of less than 1 litre
MULTIPLE CORE CABLE 2X1.0 SCR & MULTIPLE CORE CABLE 2 X 0.5 SCR
Hex head bolt M16 X 70 MM length to IS 1364 of grade 10.9 with suitable nut of grade 10.9 with two plain washer & one spring washer
Special Maintenance kit for Two way Horn valve
STEEL WIRE ROPE SLING with both end eye loop & mechanically spliced 25mm X 3 meter length.SWL-5 Ton WITH TEST CERTIFICATE.
Neoprene Rubber sheets & Rubber beading for driver desk
Set of Diaphragm & O-ring for Pressure Governor
ACETYLENE GAS DISSOLVED IN CYLINDERS TO IS 308/2024 (Rev.4)
PVC DUCT HOSE (20MM) & PVC DUCT HOSE (25MM)
Nitrile bonded rubberised cork gasket for Loco transformer conforming IS 4253/Part II - 1980 (Reaffirmed 1999) : Grade : RC 70C very good oil resistance of size ID 683mm plus or minus 2mm, OD:765mm plus or minus 2mm, thickness 6mm with 18 holes of 14mm dia at equally spaced on 720 PCD
Spare parts of LED for conversion of 110 VDC-2 feet LED tube light fitting
Polyester Multi leg (4 legged) Sling of SWL 04 Tons capacity. Capacity of sling 2.0 Ton SWL in each leg. As per ELS/HWH Drawing No. ET/RS-20/880
Set of Driving side and Non driving side End shield for MVSI/MVSL Aux motors 3HP Ranjan make suitable for 6306 bearing along with grease cup on both sides as per Drg. no. ELW/BSL/1/WAM4/124.281.
DEBURRING BRUSH OF ARMATURE COMMUTATOR MICA UNDER CUTTING FOR HYT MICA UNDER CUTTING MACHINE
Three piece design 1 1 / 4 BP & FP Angle cock with Vent
END SHIELD GASKET FOR MVMT / MVRH AS PER DRG. NO. SE/KGP/EL/530
Corridor light 4 feet 17 watts +_ 10% LED version of old 110 DC 4feet tube light fitting
SCAVENGE BLOWER TO MR BLOWER INCLUDING MOTOR (WOUND WITH CORONA RESISTANCE WIRE)
SYNTHETIC RUBBER GASKET FOR EP CONTACTOR BEND PIPE TO SIZE OD: 18mm, ID: 8mm,THICKNESS: 4mm TO ASTMD735
FLEXIBLE INSULATING PVC SLEEVE
Motor suitable for Condenser, 0.15KW, supply 415V AC +/- 10%, 3-phase, 0.7Amps, 63 frames, RPM-1350, Star connection, Reference IS: 325, Frequency 50Hz for roof mounted packaged AC unit electric locomotives as per RDSO Spec. No. RDSO/2007/EL/SPEC/0055, Rev. - 2, or latest
Maintenance Kit for R6 relay valve(Panel Mounted)
SET OF O RING FOR FLOW WELL MAKE OIL PUMP MOTOR
CYLINDER DIA 127 MM FOR RR20100 COMPRESSOR AS PER ELGI PART NO- 070200100
Set of flat washer (Galvanised) to IS:-2016/67 consisting of 07 sizes
Shim as per REPL part no : A2110 & HEX SOCKET HD SCREW M8 x 70/22
EARTH ROPE FOR TRACTION MOTOR AS PER DRG NO.Sr.DEE/RS/ED/ELEC- 80.
HEX SOCKET HEAD CAP SCREW M8X50 AS PER R [HEX SOCKET HEAD CAP SCREW M8X50 AS PER REPL PART NO : S2606, DRG NO: MT-430956-P2113 OR ANANTASHREE PART NO: G2606, DRG NO: 9910646796009 ]
Top sealing gasket for MVSI, Size: OD: 470mm, ID: 400mm and Thickness: 5mm. Material: Nitrile rubber.
Belleville spring washer 11/22 as per REPL part no : A2109 or as per ANANTASHREE part no : M2109
Graphite grease grade III Conforming to specification No IS:508:-2022(Material should have minimum six months shelf life)