Loading
Loading…
Loading…
172 results • Latest
Meggar insulation tester with two meters test lead and carrying bag. As per Annexure A attached Make- WACO or Similar.
Supply, installation and commissioning of Decade Resistance Box as per specification attached.
Supply of Analog 8 Port KVM Switch
SPLIT PIN (GALVINISHED) SIZE 10X125MM TO IS 549/ TABLE -I.
Ford Cup No. B4 (Orifice dia 3.970+/-0.015) to check the consistency/viscosity of paints and related products.
Supply ,fabrication & installation of material required for three phase loco traction motor testing facilities as per
Contactor for compressor and scavenger blower motor (Pos no 52.4, 47.2) type LP1-D8011 FW, 80/125A - 750V-3 Pole-110 Vo
Special Type Locking Bolt for Puller as per Drawing no-A4/CNB/2026/M2/01/Puller attached .
VM4 Servo Vacuum Oil Suitable for Vacuum Pumps as per attached specification
Auto Drain valve to Knorr Part No. KP0800902.
Padlock with 03 keys for LOTO BOX as specification attache
PRINTED CIRCUIT BOARD 110V (PCB)AS PER PRAG POLYMER PART NO.4204190.
Hot Air Gun for PVC Welding as per specifications attached at annexure-C.Note-A sample should be approve by consignee befor bulk supply.
Supply of one set of Development & Testing Kit for Locomotive Control Electronics (DSP Card & Repair Work), consisting of three items as per attached Annexure-1.
Set of Cable Disconnection Box Assembly for WAG9 Locomotives as per CLW Specification No.CLW/ES/3/0128/A or latest.
Set of Felt Packing as per IS:1719/2000 for support Rod Cylinder Assembly of AM12/IR03H Pantograph. Each s
Set of Kaba Keys as per CLW Spec. No. CLW/ES/3/0049 Alt-F or latest if any for 3 phase locomotive. 1) Yellow colou
Set of Spares for Earth Return Brush Holder Assembly of WAG9/WAP7/WAPS Loco as per CLW Specification No. CLW/ES/3/0017 Alt-D or Latest. One set consisting of 8 items, 86 Nos, as per annexure attach
SET OF DOUBLE FERRULES (FRONT & BACK) SUITABLE FOR 6 MM OD NYLON TUBE AS PER CLW SPECI
NYLON WASHER AS PER DRG. NO. A4/04/CNB/1965/5013/WC , S.NO. 2 FOR CENTRE BRAKE HANGER OF WAP-7 AND WAG-9HC LOCOMOTIVE.
RFID TAG as per GS1 standarsds for WAG9/WAP7 Locomotives (PACKING AS PER PARA 5 OF SPECIFICATION) as per Spec
Air Brake Hose Coupling for Brake Pipe to RDSO SK-73547 Alt -12.
MODIFIED HINGED COVER FOR SOCKET ASSEMBLY OF INTER VEHICULAR COUPLER (MODIFIED IV COUPLER) USED IN
LAMP FIXING MOUNTIONG BRACKET FOR SIGNAL EXCHANGE LIGHT AS PER CLW/MS/3/0670, ALT 2 OR LATES
SEALING PLATE (Gasket) FOR GEAR CASE BREATHER FOR THREE PHASE LOCOMOTIVES AS PER CLW DRG. No.
Supply, Installation and Commissioning of VOIP based Handset for Service during Emergency/trouble Shooting as per attached specification.
Wall mounted fan, 400mm sweep , 230 V AC whose specification as per attached Annexure-1.Note-The supplier shall s
Supply, installation and commissioning of ON/OFF indication light set-up for High Voltage power ON/OFF at ELS/CNB and outpit CNB. Arrangement consists of one Red & one Green LED light in metallic plate havi
AIR FRESHER REFILL BOTTLE WITH KNOB, FRAGRANCE-LEMON ,ITEM FORM- SPRAY. BOTTLE CONTAINS
3 POLE MCB with 01 auxiliary contact Make-ABB/Siemens or similar.as per attached annexure.
Supply, Installation and commissioning of set of spare parts of 15/4 Ton Meeka-Make EOT crane as per attached Annexure.
INTER LOCK WASHER M20 FOR WAG-9HC AS PER CLW-DRG.NO.1209-01.413-031 or latest.
SAFETY VALVE 3/4 INCH BSP TYPE 9 AS PER M/S FTRTIL PART NO 024001000 FOR E- 70 BRAKE SYSTEM OF THREE-PHASE LOCOMOTIVES.
SUPPLY INSTALLATION AND COMMISSIONING OF VIDEO MICROSCOPE SYSTEM AS PER ATTACHED SPECIFICATION CONSIS
Brush wire steel overall size 305 X 60 mm length filled 160 mm with 5 rows of wire projected 40 mm out of
Air Brake Hose Coupling for Brake Pipe to RDSO SK-73547 Alt -12.
Hex. head screw M16 X 45mm X 2.0mm Pitch PC:8.8 as per IS:1364/1367.
Set of Kaba Keys as per CLW Spec. No. CLW/ES/3/0049 Alt-F or latest if any for 3 phase locomotive. 1) Yellow colou
High Frequency Transformer having 13.5KW, 20KHZ, 580V ( L*H*D-= 28*19*7.5cm
DYNAMICALLY BALANCED ROTOR WITH SHAFT SUITABLE FOR L.H.P. MAKE OCB MOTOR FOR 3 PHASE LOCOMOTIVES.
Inter cooler safety grid as per ELS/CNB drawing no. A3/2022/CNB/2785/5039/PNEU Alt-A
PORTABLE LED LIGHT TOWER WITH GENSET as per specification annexure
Supply of polypropylene lab tray dimension 540X435X130 mm Colour-Black.Note- One sample should be approved before bulk supply.
CAB WINDOW SHUTTER LOCKING ASSEMBLY (WITHOUT GLASS) FOR THREE PHASE LOCOS AS PER DRG NO- TRS/ACL/SK-244
SPACER FOR WAG-9HC/WAP-7 TO CLW DRG.NO.1209-01.415-007 ALT- 1 or latest Spec:1209-01.415-007, ALT- 1 or latest.
Hex Head Bolt for Traction Motor holding plate fixation of WAG9/WAP7 loco, Size - M30x160 mm, as per CLWs Spec. No.4TMS.096.075, (Rev. -1) (Alt-1) or latest.
M6X15 HEX HEAD BOLT FULL THREADED GRADE 8.8 AS PER IS-1364/2002, ALONG WITH PLAIN WASHER