ETD/CNB/NORTH CENTRAL RLY Tender Results

Ultra high pressure hose pipe with link guard protection, Working pressure 2800 bar, length 6 feet, Inner diameter 4 m

Top gasket for Traction motor blower (TMB) as per Drg. No. 4TACP7KA-08 for WAP-7/ WAG-9 locos.

SET OF U CLAMP FOR TERMINAL BLOCK OF AUXILIARY MOTORS OF THREE PHASE ELECT

Supply WP Portable speaker

Set of Earth Returning Cable Securing Clamp for WAG-9 Locos as per ELS/GMO Drg. No. TRS/GMO/E3/G-9/

Design, supply, installation and commissioning of Jig for centre pivot housing & elastic ring fitment and Removing arrange

Lubricating Engine Oil Servo Premium CF 4 15 W 40 of M/s.IOCL,MAK GM 15 W 40 of M/s.BPCL,Valvoline Power Supreme 15 W 40 of M/s.Valvoline cummins ltd., Milcy Power 15 w 40 of M/s. HPCL.

Supply , installation and commissioning of steel porta cabin consist of with one room (3960X3050X2590 mm) as per attached Annexure-A.

Three Phase Locomotive battery shifting arrangement as per drawing no A4/2026/CNB/BA/Battery Shifting Arrangement.

Set of DE & NDE side end shields with grease cup suitable for 6308 bearing with outlet for excess grease for Ranjan make MRB motor

MVB based Graphical Driver Display Unit 10.4 to CLW specification no. CLW/ES/30487 Alt-C or latest. Compatible to ARC mak

Hex. head screw M16 X 45mm X 2.0mm Pitch PC:8.8 as per IS:1364/1367.

Supply of Auto Transformer(Variac) 2A closed type single phase, input 230V, output 0 to 270V as per technical specification attached.

Pneumatic tyre with tube for rod ( road) mobile crane hydra 10 ( rear wheel ) as per size 13.00x24 , 12 PR . MAKE- APOLLO, MRF, CEAT and simila

Lithium Thionyl Chloride Battery, 3.6 Volt, Capacity- 1.2 Ah, Size- 1/2 AA with attached solderable axial lead terminals suitable Make- Tadiran TL5902 or fully equivalant as per specification attache

10 PIECES ALLEN KEY set of sizes 1/16,5/64,3/32,1/8,5/32,3/16,7/32,1/4,5/16,3/8 in inch, BLACK FINISH AS PER IS 3082-1988.

Supply, Installation and Commissioning of Axle Turning Lathe Machine Model No. HD 50C Make-BECO Gear Box Spare Pa

Set of Markers consisting 1) Tamper Check paste (in 30 ml tube) Highly visible viscous and florescent in nature, Colou

HEX HEAD BOLT M24X80/54 (T/L) TO IS:1364,S8.8 WITH CASTLE NUT TO IS:2232,SPLIT PIN TO IS

Supply, installation, testing and commissioning of Induction Heater : - seal PE rings extracting machine

Air flow sensor for fire detection unit (FDU) of 3-phase locomotive with following description- (1) flow range (full scale)=0 sccm

SUPPLY AND COMMISSIONING OF HYDRAULIC SYSTEM FOR MOUNTING AND DISMOUNTING OF PINION OF 3-PHASE TRACTION MOTOR A

PRESSURE REGULATION VALVE REPAIR KIT R3000 REGULATION REPAIR KIT, SUITABLE FOR HIGH REACH PANT

Piston complete for MREP OV valve as per M/s. KBI part no. II41384 of Electric CCB 2.0 system.

Terminal board Assembly for 3-phase TM of WAP7/WAG9 as per CLWs Drg. No. 2TWD.096.019 (Alt.-1) or latest & CLWs Spec. No. 4

Set of Quick Coupling for main transformer of 3 Phase Locomotives as per CLW Specification No. CLW/ES/3/0456, Alt-K and confirming to CLW Drawing No. CLW/ES/3/SK-4/0456, Alt-C.

Set of Cable Disconnection Box Assembly for WAG9 Locomotives as per CLW Specification No.CLW/ES/3/0128/A or latest.

OIL INJECTOR PUMP COMPLETE SUITABLE TO BUILD UP HYDRAULIC PRESSURE UPTO 3000 KG./SQ.CM [44,000P

Industrial Rotary Desiccant Dehumidifier (Silica Gel Rotor Type), complete with fan, regeneration heater, rotor motor, control panel, filters, humidistat connection, safety protections, and all standard

SUPPLY OF VOLTAGE TRANSDUCER DVL 1000 VPN 1000V. or similar as per attached annexure .

Supply and fitment of covering arrangement for enclosure of pneumatic lab as per Specification in accordance with annexure-A enclosed

Steel wire rope sling As per IS:2762:2009 with one end wheel disc lifting tackle: As per drawing no. SK23AL0444 and

CAPACITOR 0.47 micro farad, 5000V,16A.or similar as per attached annexure.

Supply, Installation and commissioning of complete digital display with all accessories for power electronics lab consisting 65" commercial display LG or similiar as per attached specification.

Water cooler with purifier as per enclosed ANNEXURE-1

Supply, Installation, Testing and Commissioning of Rain Water Testing System at ELS/CNB as per attached Specification and also conforming to RDSO SMI No. RDSO/2017/EL/SMI/0315(REV.0) dt. 03.10.2017 or lates

Supply, installation, testing and commissioning of Ultrasonic PCB cleaner 24 Ltr. Make/model LUMC25 or similar as per specification attached as Annexure-1

Contactor A12 -30-10,110V, 50HZ for controlling 3 phase motors in cab AC units of WAP7/WAG9 locomotive. Ma

Supply, installation and commissioning of S.S. 304 Punch Grid Resistance Box HP- 17, Rotor V-241 Volt,

Supply, installation and commissioning of Decade Resistance Box as per specification attached.

Supply, commissioning, testing of Heavy duty electro-hydraulic lifting platform Trolley as per specification at Annexure-I e

Set of PT100 Resistance element as per ABB Drg.3EHM 311882 ALT4 or latest for temperature

Supply of reusable silica gel beads, orange colour indicating desiccant, grain size 2-4 mm, packed in 250 g breathable reusable

Bearing no. 4306ATN-8 Angular Contact-9 Angular Contact for oil cooling pump of FLOWELL /SAMAL HARAND(DE SIDE) as per Drg.No. ------------ specn: --

3 POLE MCB with 01 auxiliary contact Make-ABB/Siemens or similar.as per attached annexure.

Aluminium Cable cleat for Traction Motor for WAG-9/ WAP-7 three phase Electric Locomotive as per Specification No. CLW/ES/3/0039 Alt.'F' or lates

ADSL2+ Wi Fi Modem Router having interface 4 Numbers of 10/100 Mbps RJ 45 Ports & 1 Number RJ 11 Port confirming to specification attached

Battery Operated Copper cable cutting tool with fast charger and 2 pcs Battery of capacity 18 V 4.0 AH , Cutting Size upto 200 Sq.mm. Copper cable Make- Klauke ,Jainson or Equivalent

SET OF PRIMARY HELICAL SPRING FOR WAG-9HC LOCO TO CLW SPECIFICATION NO. CLW /MS/3/SPEC/ELDO -BOG

Rotary cam switch(Input voltage 380-415 VAC, type 3T26C, C3, two pole three way ON OF