Loading…
Loading…
Found 3 active tenders
3 results • Latest
Empanelment of Service Providers for providing Audio Visual Equipment on rental basis at IIM Ahmedabad.
Audio Equipment
SITC of complete skid mount 200 KLD Softener Plant on BOT with 60 KLD, 40 KLD and 20 KLD Softener Plant Operation and comprehensive annual maintenance at IIMA.
Supply, installation, testing & commissioning (SITC) of complete skid mount Softener Plant (200 KLD) with one-year onsite support and comprehensive operation & maintenance at IIMA campus. And after one year, 3-years operation & comprehensive annual maintenance contract (CAMC).
Fabricating, Providing and Erecting MS gates for Student Dormitories in the New Campus, Indian Institute of Management Ahmedabad.
Fabricating, providing and erecting MS gates for student dormitories: a) Providing, fabricating and fixing the mild steel gates at student dormitory from Dorm- 19 to Dorm-27 entrances as same done at Dorm-26. b) Gates to be prepared by using MS pipe (35x35x3mm), MS angle (40x40x6mm), MS flats (40x6mm, 25x6mm), Hinges -75x50mm, MS weld mesh (30x30mm), stopper, aldrop, holdfast and including all to erect and operate. c) Door shutter frame made of angle section and shutter frame made up of box section. MS flats used for holding weld mesh. d) Opening sizes & quantity- 1.93 X 2.90 mts-8nos, 1.25 X 2.90 mts-2nos, 1.36 X 3.05 mts-16nos (+/- 0.05mts) e) One side of door pannel to be made auto close by fixing door closer. This item considered separately. f) Sizes mentioned above are tentative based on existing sample done. They may change during actual work on preparing one sample. g) Fastner of 10mm diameter and 75mm length to be used. This item considered separately. h) Welding to be done for entire length wherever comes. i) MS members to be applied with one coat of yellow zinc oxide primer and then two coats of antirust enamel paint. Suitable sanding to be done to remove complete loose particles. This item considered separately. j) No extra will be paid for wastages. Notes-Sample of the material to be get approved form IIM representative before going for mass purchase & fabrication. Refer photo in NIT (last page).