Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
1,73,231 results • Latest
Modified Rail base clamp for fitting RX/TX coils along with accessories
Torque Wrench, Adjustable Ratchet Type w [Torque Wrench, Adjustable Ratchet Type with coupler, 1/2 inch square drive, Range:- (70-340) Nm. Make/Brand:- Norbar/Gedore/ stahlwille/snap on or similar ]
Auto drain valve in Moisture separator
Ethylene Oxide Sterilization Roll , size - 300 MM X 200 MTR.
Ethylene Oxide Sterilization Roll ,size- 150 MM X 200 MTR .
Ethylene Oxide Sterilization Roll , size - 100 MM X 200 MTR
Ethylene Oxide Sterilization Roll ,size- 200 MM X 200MTR.
Ethylene Oxide Sterilization Roll ,Size- 250 MM X 200 MTR .
Procurement of BRUSH SILVER GRAPHITE etc.
SUPPLY AND INSTALLATION OF LOCKERS FOR CREW COMPARTMENT OF LWCB/PP COACHES
Losartan Potassium 50mg and Hydrochlorth [Losartan Potassium 50mg and Hydrochlorthiazide 12.5mg Tab]
SET OF FLEXIBLE LEAD WIRES WITH NICKEL COATED ENAMELLED HIGH CONDUCTIVITY COPPER WIRES etc.
Upper Rubber Washer for Bogie Bolster Suspension.
SET OF METER FOR STARTER BATTERY CHARGER
BALL BEARING 6204-2RS-C3.
Sander with Nozzle Assly
Supply of Self-Adhesive Insulating packing tap for ceiling as per MDTS-116, REV-05, Size:- 20mm X1250mm. Sample to be approved before bulk supply
Special Maintenance Kit for E-70 Brake Control
BRAKE APPLICATION VALVE.
Contactor Control circuits on 110V (Min-77V to Max-137.5V).
DOUBLE CHECK VALVE ASSY to FTRTIPL Part Number 002007500.
Iron Skids. specification for wheel skids
Point Screw Clamps with padlock
Inspection gauges
Hand Operated Hydraulic Crimping Tool
BALL VALVE, Schunk Part No-909010006600 [ BALL VALVE, Schunk Part No- 909010006600.]
(Vande Bharat) Set of N & S ASPIRATING TYPE FIRE/SMOKE DETECTION WITH ALARM SYSTEM As Per Attached Annexure-A.
CURTAIN RUNNER HOOK
BUSH FOR BOGIE BRAKE GEAR OF CASNUB 22W BOGIE TO RDSO DRG.NO.WD-- 89033-S-1, ALT.21. ITEM No.6 52x41x22 NLB,HS. specn: SK 69597 ALT 26
QUICK RELEASE VALVE SUB ASSEMBLY FOR DISTRIBUTOR VALVE
KIT GASKET FOR CAM SHAFT DRIVE HOUSING
Wheel Sensor for MSDAC
UNION SOCKET 1/2"
Tooth spacing K-value checking GO Gauge [Tooth spacing K-value checking GO Gauge for bull gear 72 teeth mating shaft pinion 20 teeth for WAP-7 locos to RDSO Drg. No. SKDP-3474 & RDSO: MP.M1-129/86. Sizes GO: 260.958mm/260.992 mm. Material: Tool Steel to IS: 3748/90, Hardness: 50/55 HRC. C alibration certificate from NABL approved Lab to be supplied along with the material.]
Set of end shields(DE & NDE) with grease [Set of end shields(DE & NDE) with grease cups suitable to 6312/C3 bearings for M/s. I.C. Electricals make Oil Cooling Blower type IC 301M TESC, 30KW/40HP, 50Hz, 415V as follows. 1) DE side end shield with grease cups. Qty/set. = 01 no. 2) NDE side end shield with grease cups. Qty/set. = 01 no. Note: One sample set should be got approved before effecting bulk supply.]
PORTABLE BALANCER AS PER SPECIFICATION E [PORTABLE BALANCER AS PER SPECIFICATION ENCLOSED IN ANNEXURE "A"]
ELBOW FOR DUCT OF WAG7 LOCOS AS PER DRG NO. WR-DHD-EL/3-BF-183.
Door Hinge Pin 20 x 99 to IRS Drg. no. W/PN-39, Alt.-4. Material and specification should be IS : 2062-2011 (Re-affirmed - 2021), with Amendment no. 1 of Nov. 2012, Gr. E 250 A. Spec:NIL
CABLE LUG 10.0/M8 as per Specn. CLW SPEC [CABLE LUG 10.0/M8 as per Specn. CLW SPECIFICATION NO. CLW/ES/3/0130/O (TO BE PROCURRED FROM CLW APPROVED SOURCES ONLY.]
Growler tester for 3-phase induction mo [.Growler tester for 3-phase induction motor, 230V, 50 Hz dual magnetization yoke with standard accessories (1) Thermacol Moulded Carry Case: 1 no. (2) ASTM Test Block: 1 no. (3) Pie gauge: 01 no. (4) Puffer Bulb for powder spray: 1 no. (5) Dry Magnetic Powder black water base: 1kg. (6) Operational Manual: 1 no. Note: The firm will submit the warranty certificate, test certificate and calibration certificate along with the material]
TERMINAL BOX WITH COVER SUITABLE FOR SCT [TERMINAL BOX WITH COVER SUITABLE FOR SCTMB, SCMRB, MRB OF RANJAN MAKE AS PER DRAWING. NO. TRS/GMO/E-2/3 PH/041A/ECR FOR THREE PHASE LOCOMOTIVES. ONE SAMPLE TO BE APPROVED BEFORE BULK SUPPLY]
SET OF COMPENSATING PLATE FOR WAP-5 PRIM [SET OF COMPENSATING PLATE FOR WAP-5 PRIMARY & SECONDARY SPRING AS PER ANNEXURE ATTACHED.]
HRC Fuse 16Amps/100V DC Bottle type etc.
LED Light fitting for Passenger Area (Cabin) for LHB AC Coaches Type L (18W) as RCF Drg No. LW76090 Alt. B conforming to RDSO Spec. No. RDSO/PE/ SPEC/TL/0091-2016 (Rev - 1) and RCF's annex.3