Loading
Loading…
Loading…
148 results • Latest
Connector similar to KBI Part No :-N75599
SET OF ITEMS FOR PIPE LAYING FOR WASTE WATER FOR LHB TYPE COACHES FITTED WITH BIO TANK. (1) PIPE Dia 42 (OD) x 2 x 1100 CONFORMING TO DIN SPECIFICATION No. DIN2391C, X5CrNi1810 and toRCF Drawing No. MI006005, Item- 1, Alt-c, Qty.-1 No./SET. (2) PIPE CLIP 43 CONFORMING TO SPECIFICATION No. IS:6911-92, GRDE-304 SI and to RCF Drawing No. LW63110, Item-12, Alt-NIL, Qty.- 4No./SET. (3) STAINLESS STEEL HEX HEAD BOLT M8 x 40 (A2-70) CONFIRMING TO IS:1364-92, PT.-1, IS:1367-84, PT.-14 and to RCF Drawing No. MI006005, Item-4, Alt- c,, Qty.-14No./SET. (4)STAINLESS STEEL MACHINE WASHER A8.4 (A2 70) CONFIRMING TO IS:2016-1967, DIN125, IS:1367-84, PT.-14 and to RCF Drawing No. MI006005, Item-4, Alt-c,, Qty.-14No./SET. (5) STAINLESS STEEL NYLOC NUT AM8 (A2- 70) CONFIRMING TO IS:7002-1991, DIN982, IS:1367-84, PT.-14 and to RCF Drawing No. MI006005, Item-4, Alt-c, Qty.-14No./SET. (6) SUPPORT BLOCK CONFIRMING TO IS:7002-1991, DIN982, IS:1367-84, PT.-14 and to RCF Drawing No. 4 10113 0 30 095 093, Alt-Nil, Qty.- 4No./SET. (7) SUPPORT BRACKET COMPLETE CONFIRMING DIN59382(SEW400 X2Cr11 1.4003) and to RCF Drawing No. LE63243,Alt-NIL, Qty.- 2No./SET.
Cover for Side Bearer Housing for DEMU/DPC to Drg. No. EMU/M-1-1-036, Col.I, Alt.g/4 or Latest
Seal kit for water pressuriser unit functionally compatible in EPPFS of IR coaches .Make SPAC or Similar As per annexure -A .
LOOK OUT GLASS MADE OF SILICON HARD COATED POLYCARBONATE SHEET AS PER ICF STR NO. ICF/MD/SPEC.159 REV. NO. 01. DATED 05-08-2004 WITH AMENDMENT SLIP NO. 02 DATED 09-11-2011 AND SIZE OF SHEET IS 1220 MM X 1220 MM X 9.5 MM THICK FOR AC/DC EMU'S.
Paint enamel synthetic exterior finishing bus green ISC No. 299 as per IS: 5/07(Reviewed in 2018) to IS: 8662/2024 third revision with RDSO amndt. No. 1B(Rev. 2.0) as an additional requireme nt along with RDSO amndt. No. 1(Rev.0) for pigment content as an additional requirement to IS:8662/04. with additional requirement of ICF/MD/Spec. 045. Issue status 02, Rev. 03, packed in 20 Ltrs. new and sound non-returnable M.S. drum to IS:2552/1989 with amndt. 1 of April 1999, Grade B-1.
Rubber Hose for S - Trap Arrangement as per drawing no.CG-16008 item-4, Alt.-2 nominal dia (Bore)70mm and length 375mm with one side end tapered to nominal dia 45mm colour Black. Material as per IS:14933-2001 type B with latest amendment. as per Drg.No. drawing no.CG-16008 item-4, Alt.-2 specn: IS:14933- 2001 type Bwith latest amendment.
Waterproof IP68 LED flashlight with 3000 Lumen Turbo mode of upto 1500 feet distance, battery type 21700 rechargeable. Total weight including battery less than 220 gms. Engraving- ?Indian railways? in Arial font. Make and model Fenix TK20R V2 or similar model of Ledlenser or Nitecore or Coast.
Water Pump With Accessories As Per Annexure-A For SPIC(Cummins NTA 855-R Engine)
Mirror holder for LHB coaches as per RCF drg. no. LW62125 Alt-b for LH and RCF drg. no. LW62126 Alt-b for RH ( Quantity 50 % for LH & 50 % for RH ) Matl.&Spec. As per drg
5 PIN RIGHT ANGLE CONNECTOR MALE PART NO. MG 08F 14S-5P V0 SS or Similar
SET OF FLASH BACK ARRESTER FOR TORCH END OF OXYGEN and ACETYLENE TO PROVIDE FLASH BACKS (BACK FIRE) IN OXYGEN FUEL SYSTEM WITH FLAME ARRESTER. IT IS PROVIDED ON BOTH END, TORCH SIDE AND REGULATOR SIDE. TOTAL REQUIREMENT IS 02 NOS. FOR OXYGEN AND 02 NOS. OF ACETYLENE ON ONE GAS UNIT WORKING PRESSURE MAXIMUM UPTO 05 BAR FOR ACETYLENE and 15 BAR FOR OXYGEN, END CONNECTION 3/8 INCHES, MATERIAL-BRASS, TYPE -SINGLE ENDED, FIRM SHOULD SUBMIT OEM CERTIFICATE AND TEST REPORT, AS PER IS: 7653-1975, PRODUCT SIMILAR TO ESAB MODEL- FRTG 3/8 RH FOR OXYGEN, FRTG 3/8 LH, REGULATOR SIDE FRTG 3/8 RH TORCH SIDE OXYGEN, FRTG 3/8 LH, TORCH SIDE ACETYLENE AS PER ANNEXURE-1 ATTACHED. ONE SET CONSISTS OF 04 ITEMS IN 100 NOS.
Snack Table Assembly for LHB AC 3 tier Economy Coaches. Drawing No.ED64004, Alt.- c. Material & specification: As per drawing. One sample approval required before bulk supply.
Supply, commissioning & demonstration of flame proof Human body static charge dissipaters outside the painting chamber to dissipate the static charge. Specification as per attached in Annexure-A
Online UPS 6KVA/4800W/198V DC SMF Battery 26Ah/12V(16 Nos.) with complete set comprising of Battery Rack, Battery Wire, input wire & Thimble set. Technical specification as per Annexure A.
Radiator assembly equivalent to CIL part no 4968230 for 1400 HP DEMU/DPC Engine model KTA 50L OR Equivalent
Angle seat valve-3/4 inch designed for pressurized flushing system as per MDTS 19027 Rev.3, make: SPAC, Item code: SPAC.0011042, or Janatics: CS40344 or equivalent make. Functionally compatible in Pressurized flushing system of Indian railway coaches.
KIT ETR FUEL CONTROL(ACTUATOR) FOR 1600 HP DEMU/DPC,CIL Part No.2882025 OR EQUIVALENT
Valve Pressure Relief and Accessories For 1600 HP DEMU/DPC As Per Annexure-A
3) UNION ELBOW 1 OD, ITEM NO. 3, REFERENCE DRG.NO. ICF/STD-3-5-017, Alt.a. AS PER SPEC.ICF MD166, REV.04 OR LATEST FOR LHB COACHES.
Set of items for pressurized flushing system consist of two items, Item no 1 :- Y Strainer as per RCF Drg.No. LW63100 item no.-04 , Item no :2 :- Hex nipple 3/4 inch AISI 304, for LHB Coach maintenance.
Air DESERT COOLER GALVANISED STEEL BODY TANK CAPACITY 120 LTR BODY SIZE 37"X28"X28"THICKNESS 0.8MM MOTOR 210-250 WATT WITH TANK SHEET THICKNESS 1MM WITH PUMP, SINGLE PHASE 230 VOLT (TULLU PUMP) WITH ELECTRNIC REGULATOR, 2.5 METER COPPER 2 CORE WIRE, WARRANTY 01 YEAR.
SMPS, INPUT RANGE-110V AC/DC WITH 30% VOLTAGE TOLERANCE, OUTPUT- 24VDC, for Electro pneumatic flushing System MAKE: SPAC, Item Code: SPAC.0018360 AS PER MMDTS 19027. Rev.03 DATED 22-12-2022 OR EQUIVALENT MAKE FUNCTIONALLY COMPATIBLE IN PRESSURIZED FLUSHING SYSTEM FITTED IN LAVATORIES OF INDIAN RAILWAY COACHES. ACCEPTABLE MAKE: ABB or Bosch or Honeywell or Schneider or ITC Electrical Components or SELEC or GIC or any other make approved by CDE/MCF AS PER MMDTS 19027 REV 03 CLAUSE 6.7 & SI NO 2 OF TABLE 1
Set of LOCKING PLATE for DEMU/DPC. 1.LOCKING PLATE 10x48x105 (FOR 20TAXLE BOGIES WITH AIR SPRINGS) Conforming to IRS Specification IRS M-41 and to ICF Drawing No. 574- 0-5-011, Alt.- a/Nil. Qty.- 08 Nos/Set. 2.LOCKING PLATE 23x52x105 (FOR AIR SPRING BOGIE BOLSTER WITH STRAIGHT WEBS) Conforming to IS Specification IS:2062 E250 Cu C and to ICF Drawing No. ICF/SK3-0-5-005, Alt.- b/Nil. Qty.- 08 Nos/Set
SET OF LADDERS FOR LHB SCN COACHES, ONE SET CONSISTS TOTAL 11 NOS OF LADDER IN WHICH 09 NOS AS PER DRG NO. SE64162, 01 NO AS PER SE64161,ALT-b AND 01 NO AS PER SE64160, ALT-b
Heavy Duty Welding Jacket with Stripes large size with high quality tensile-strength, cotton fabric having flame retardant properties and Zip side slots as per Specifications attached Annexure-A. Equivalent to Model WELDJKTLG of Snap-On, Makes- ESAB or Miller or Lincoln.
Set of Visible Black Magnetic Particle and White Contrast Paint for MPI, Containing two items in each set. (Item 1) Non-florescent Premixed Black Magnetic Particle for WET Method MPI in oil media in aerosol container. (Packing 280 / 400 ML) as per RDSO Spec M&C /NDT /109/ 2007 Rev 02 Oct 2020 Quantity 01 No in each set. (Item 2) White Contrast Paint used with visible Magnetic Particles for WET method inspection in aerosol containers. (Packing 280 / 400 ML) as per IS 3703: 2004. Quantity 02 Nos in each set.
Gasket for under slung water tank Sealing Purpose of LHB Coaches (one set consist of 2 item) (1) Gasket Size 325mm OD x 260 mm ID x 3 mm as per RCF Drg No- CC63999 Alt Nil (2)Gasket Size:90mm OD x 50 mm ID X 3mm as per RCF Drg No- CC63831 Alt-nil
Non Return Valve (Vertical) brass body size 25 mm as per IS:778/84.Make- victor,pratap,zoloto or similar .
ELECTRICAL PUSH BUTTON (1 NO+1 NC) WITH GREEN LED INDICATOR DESIGNED FOR PRESSURISED FLUSHING SYSTEM, AS PER MDTS 19027. REV.01 OF MAKE: SPAC (Shree Prayag Air Controls Pvt Ltd) ITEM CODE SPAC.0011223 OR SIMILAR MAKE, FUNCTIONALLY COMPATIBLE IN PRESSURISED FLUSHING SYSTEM OF INDIAN RAILWAY COACHES FITTED WITH PRESSURIZED FLUSHING SYSTEM.
Set of items consisting of : 1] U Bracket as per RDSO Drg. No. CG-16014, ALT. - NIL. Qty.1 No. 2] SS Hex Nut M10, Property Class A2-70 to IS: 1364, Pt.-3- 2018, or latest, and IS: 1367, Pt.- 17, 2023, or latest, Qty. 2 Nos.
Supply of One Set of PU Paint (Two Pack) for SPIC(Parakh) as per RDSO Spec.No. M&C/PCN/100/2018 with Amendment IB (REV-2.0) as an additional requirement. One Set consists of PU Paint Coral Red, RAL-3016, 35 Litres and PU PAINT PAPYRUS WHITE METALLIC FINISH, RAL-9018, 80 Litres.
5/2 WAY SINGLE SOLENOID VALVE BSP 1/4 INCH (WITH MOUNTING 24VDC COIL)DESIGNED FOR PRESSURISED FLUSHING SYSTEM AS PER MMDTS-19027. REV 01 MAKE: SPAC, ITEM CODE: SPAC.0007995, OR EQUIVALENT
ELECTRONIC TIMER SPDT DESIGNED FOR PRESSURIZED FLUSHING SYSTEM AS PERMDTS19027. Rev.03 DATED 22-12-2022 MAKE: SPAC ITEM CODE: SPAC.0011211 (OR) EQUIVALENT MAKEFUNCTIONALLY COMPATIBLE IN PRESSURIZED FLUSHING SYSTEM FITTED IN LAVATORIES OF INDIANRAILWAY COACHES. MAKE - ABB/BOSCH/HONEY WELL/ SCHNEIDER/ ITC ELECTRO COMPONENTS/SELEC &SIMILAR. ONE SAMPLE TO BE PROVIDE BEFORE BULK SUPPLY
Swivel Elbow 1 OD to Drg. no. ICF/STD 3-5-022, Item-2, Alt. a. Material Specification- ICF/MD/SPEC.-166
Hot air oven (Digital Indication) with suitable 12" mild steel stand with digital temperature controller and timer. size- 60 x 60 x 180 cm (L x D x H).
Set of Air System Hoses For 1600 HP DEMU/DPC As Per Annexure-A Attached
Porcelain Commode with elliptical bottom (complete) to ICF Drg. No. ICF/DEV/SK- 6-3-16 0 Alt. s/8, Col. II.
PVC FILM ROLL TO MAKE 1000 SHOE COVER SUITABLE FOR USE MARINO INTERNATIONAL SHOE COVER MACHINE MI1000. MATERIAL SPECIFICATION AS PER ANNEXURE.
RUBBING PAD COMPLETE to Drawing No.ICF/SK/0-5- 166.COL-I. ALT-C or Latest For DEMU/DPC
Rubber Hose for S - Trap Arrangement as per drawing no.CG-16008 item-4, Alt.-2 nominal dia (Bore)70mm and length 375mm with one side end tapered to nominal dia 45mm colour Black. Material as per IS:14933-2001 type B with latest amendment. as per Drg.No. drawing no.CG-16008 item-4, Alt.-2 specn: IS:14933- 2001 type Bwith latest amendment.
Staff Lockers (Workman Lockers), 04 Compartment as per drawing no.- SK-IZN-39- 2025.
OIL FILLING CAP ASSEMBLY WITH STRAINER NECK JOINT SOCKET FOR DEMU/DPC,DRG.NO.2CB/DMU/DPC- 091
Swivel flange & socket for 25 mm NB pipe on air brake to Drg.WD-83062-S-06, alt- 4 item-2&4 confirming to RDSO spec.no.04-ABR-2002 Rev. 01 of Nov' 17. Matl & spec. IS:2062/2011 with amndt-1 of nov' 12 grade-E250 Cu A.
Staff Lockers(Work men lockers), 04 compartments as per Drawing No. SK-39-2025.
LED light fitting for berth reading light transverse lower berth (LHS) for LHB AC coaches Type - F4, 2W as per RCF Drawing No: LW76096 or latest and RDSO spec No: RDSO/PE/SPEC/TL/0091-2016 (Rev - 1).
(1) V Belts C-70 for Ventilation Fan Pump of CIL Engine 1400 HP DEMU/DPC. Make: Fenner/Continental/Dunlop/CIL Only. (2) Endless V-Belt C-112 Non - Cogged confirming to IS 2494 (Part 1):1994, Rev-02 with Amendment No- 01 April 2005 and IS 2494 (Part 2):1993, Rev-02 with Amendment No-03 September 2005 for DEMU/DPC. MAKE: Continental/Fenner/Dunlop/CIL Only.
Two legged chain sling made from alloy steel, Effective length - 3 meter, Chain dia - 12mm, capacity - 07 Tons Minimum, chain as per IS 2760 with O ring at top (Size: 32mm dia x 160mm ID), suitable hook at bottom hook as per IS 3822 .With test certificate from govt approved agency for SWL, proof load and material