Loading
Loading…
Loading…
148 results • Latest
Wheel Set Earthing equipment for LHB Coaches as per RCF Specification No. EDTS101, Rev. C, Amndt. 3 & Corrigendum-10 with Annexure 1.
(1) REXINE FOR LHB AC-III TIER ECONOMICAL COACH IN WIDTH- 1270 MM AS PER DRAWING/ SPECIFICATION NO- RDSO/2008/CG-07 , REV-0 , AMNDT. NO-5 , COLOUR- PF- LIGHT GREY. NOTE- SAMPLE TO BE APPROVED BY CONSIGNEE AGAINST COLOUR, SHADE AND PATTERN ONLY BEFOR BULK SUPPLY (2) REXINE FOR LHB AC-III TIER ECONOMICAL COACH IN WIDTH- 1270 MM AS PER DRAWING/ SPECIFICATION NO- RDSO/2008/CG-07 , REV-0 , AMNDT. NO-5 , COLOUR- PURPLE VOILET, RAL -4007 . NOTE- SAMPLE TO BE APPROVED BY CONSIGNEE AGAINST COLOUR, SHADE AND PATTERN ONLY BEFOR BULK SUPPLY (3)REXINE FOR LHB AC-III TIER ECONOMICAL COACH IN WIDTH- 1270 MM AS PER DRAWING/ SPECIFICATION NO- RDSO/2008/CG- 07 , REV-0 , AMNDT. NO-5 , COLOUR- PF- DARK GREY. NOTE- SAMPLE TO BE APPROVED BY CONSIGNEE AGAINST COLOUR, SHADE AND PATTERN ONLY BEFOR BULK SUPPLY
S.S. Chuck nut inner dia 1/2 inch, AISI:202 (Material used for holding & fixing 1/2 inch water pipe line in lavatory area in LHB coaches).
Ball Valve 25 mm for Sanitory facility to RCF Drg. No. LW 63106 Alt-a, Item No. 5, Material & Specification as per drawing.
A set of Velcro Sanding Paper suitable for Bosch Make Sander Model: GEX 34- 150. ( One set consists of 20 No. Grit 80 Velcro Sanding Paper and 40 No. Grit 220 Velcro Sanding Paper ).
Galvanised 16.3 mm Dia Flexible Steel Wire Rope (3 meter long) Sling complete with loop with thimbles on both ends as per IS-2762/2009 or latest.
INDUCTION HEATER (11 KVA) similar to M/s unitech induction heater model no.UIH- 2003 Description:Power 11 KVA, 440 V AC, swing arm arrangement, intelligent micro controller based electronic controls, memory backup in case of power failure, feather touch keyboard and display mounted on main panel along with horizontal yokes and special temperature probe with cable and socket. Use for DEMU power car
50mm Flanged Globe Valve, Class-1, Straight Type, Fuel Type : HSD, Material (Body,Bonnet or Cover is of Brass) & Other Component as per IS:778-1984, Min. Length of Threaded Portion :17.0mm, Flange Dimensions (Diameter : 165+1 & -1 mm, Thickness : 11+1.5 & -0 mm, Belt Circle Diameter : 125mm, No. Of Holes : 4, Diameter of Holes : 18mm) as per IS:778-1984 and and all other Dimensions & Specifications as per IS:778-1984 or latest
FIBER GLASS 'R.P.' TISSUE, WIDTH 01 METER TO ICF SPECIFICATION NO.- ICF/MD/SPEC- 027, REV. A, dt. -26.07.88.
Set of Pipe Line and Pipe Fitting for Unloader of Air Compressor Model no: TRC-2507 for 1400 HP DEMU/DPC. One set consisting of 04 items as per Annexure-A. Make: ELGI or Equivalent
D.C. Rectifier 150V/250A For Run Test of Traction Motor of 1400 HP DEMU as per specification attached for 1400 HP DEMU
KIT, WATER PUMP FOR 1600 HP DEMU/DPC,Model-QSK 50L,CIL part no.5473148 OR Equivalent
Bracket for Anchor link (Bolted design), each set consists of two items 1) Bracket for bogie frame Drg.No. T-0-3-680. Alt. c or latest Qty. 01 Nos. 2) Bracket for bogie bolster Drg. No. T-0-4-657.alt.a or latest Qty. 01 Nos.
Non Asbestos based organic Brake Pad 400 Sq.cm & 35 mm thickness in two halves (one RH & one LH) of 200 Sq.cm each for LHB coaches to RDSO Specn. No. RDSO/2013/CG-01 (Rev.1)
Set of Hex Head Bolt M24x180 to IS : 1364 PT. 1-92 B, 8.8, CE WF Coating to MDTS 057 with prevailing Torque Type Nut M24 to IS : 7002-1991, 8 Coating to MDTS 057 and Punch Washer A26 to IS : 2016-1967 Steel Coating to MDTS 057 in Assembled Condition, as per Drg. No. RCF Drawing No. AW05100 Alt. f, Item 25, 26, & 27 spec: As per drawing
ONE SET OF SS TUBES AND DOUBLE FERRULE FOR BRAKE PIPING ARRANGEMENT OF LHB BOGIES CONSISTING OF 10 ITEMS.(FOR QUIL SPRING) (1). BULK HEAD ELBOW (WITH CONICAL SEATING) 3/4"OD X M26 X 1.5(M) TO DRG.NO.ICF/STD-3-5-113 ,ITEM-1,ALT "c" QTY-3 NOS. (2). BULK HEAD MALE CONNECTOR 3/4" OD X 1/2" BSP TO DRG. NO.ICF/STD-3-5-114-ITEM- 1,ALT"e"QTY-4 NOS (3). FEMALE RUN TEE CONNECTOR 3/4" OD X 1/2"BSP X 3/4" OD TO DRG. NO.ICF/STD-3-5-119-ITEM-1,ALT"c", QTY-l (4). BULK HEAD ELBOW 3/4" OD TO DRG. NO. ICF/STD-3-5-117-ITEM-1,ALT"b" QTY-l NOS (5) FEMALE RUN TEE "CONNECTOR WITH CONICAL SEATING 3/4" OD X 1/2" BSP XM26 X 1.5TO DRG.ICF/STD-3-5-118-ITEM-1, ALT"nil" QTY-l NOS (6). MALE ELBOW WITH CONICAL SEATING 1/2" BSPT(M) X M26 X 1.5(M) TO DRG.NO.ICF/STD-3-5- 115,ITEM-1,ALT"nil",QTY-4 NOS (7).SPECIAL ADAPTOR 1/2" BSP(M) X 1/2" BSPT(F) TO DRG. NO. ICF/STD-3-5-116-ITEM-1,ALT"b",QTY-4 NOS (8). FEMALE CONNECTOR 3/4" OD X 1/2" BSP TO DRG. NO. ICF/STD-3-5-107-ITEM- 2,ALT"e",QTY-4NOS (9). HEX NIPPLE 1/2" BSPT TO DRG. NO. ICF/STD-3-5- 025- ITEM-2,ALT"h", QTY-2 NOS (10). SS SEAMLESS PIPE 3/4" OD X 6000 MM ASTM A269 Gr.TP 304 TOICF/MD/SPEC-166,QTY-l NOS
Temperature control thermostat (OVER HEAT PROTECTOR) similar to make DANFOSS model No. KP-79 Auto Reset bulb type code No-060L 112666 setting range 50-100 degree centigrade with differential facility as per RDSO L/No. EL/7.2.2 DT- 09.01.2014. Make Alert/Danfoss (KP79) or any other equivalent make with prior approval of RDSO.
INSULATION MONITORING RELAY 110V AC, MEASURING RANGE 1 K OHM TO 100 K OHM, CONTROL VOLTAGE RANGE 24-240V AC/DC, OUTPUT 1C/O (SPDT) CONTACT, SYSTEM LEAKAGE CAPACITANCE 10 MICRO FARAD. CONFORMING TO RDSO SPECIFICATION NO. RDSO/PE/SPEC/AC/0184-2015 (REV-1), USED FOR INSULATION CONTROL 110V OF LHB TYPE AC COACHES, ACCEPTED MAKE & CAT. NO.: As per Sr. No. 67 of the Common BOM list issued vide RDSO Letter No. EL/7.1.108/MSSBC dated 17.09.2021
1) Hex head Bolt M20x80 grade 8.8 and prevailing torque type nut to size M20 with punched washer size A22 for safety wire rope of brake beam items 18,22 and 23 conforming to ICF DRG NO T-3-2-801, Alt h/5 or Latest 2) SET OF FASTENERS FOR MUFFLER of 1400 HP DEMU DPC containing (a) Hex Head Bolt M20 x 65 Grade 10.9, (b) 01 no Nut, (c) 01 no Spring Washer, (d) 01 no Plain Washer. Make: TVS/UNBRAKO/ LPS/BOLT MASTER/DFL only.
EXHAUST MUFFLER To Cummins Part No. 4021089 suitable for 1400 HP DEMU/DPC having Cummins KTA 50 L Engine. Make: Cummins or Equivalent.
SET OF FLASH BACK ARRESTER FOR TORCH END OF OXYGEN and ACETYLENE TO PROVIDE FLASH BACKS (BACK FIRE) IN OXYGEN FUEL SYSTEM WITH FLAME ARRESTER. IT IS PROVIDED ON BOTH END, TORCH SIDE AND REGULATOR SIDE. TOTAL REQUIREMENT IS 02 NOS. FOR OXYGEN AND 02 NOS. OF ACETYLENE ON ONE GAS UNIT WORKING PRESSURE MAXIMUM UPTO 05 BAR FOR ACETYLENE and 15 BAR FOR OXYGEN, END CONNECTION 3/8 INCHES, MATERIAL-BRASS, TYPE -SINGLE ENDED, FIRM SHOULD SUBMIT OEM CERTIFICATE AND TEST REPORT, AS PER IS: 7653-1975, PRODUCT SIMILAR TO ESAB MODEL- FRTG 3/8 RH FOR OXYGEN, FRTG 3/8 LH, REGULATOR SIDE FRTG 3/8 RH TORCH SIDE OXYGEN, FRTG 3/8 LH, TORCH SIDE ACETYLENE AS PER ANNEXURE-1 ATTACHED. ONE SET CONSISTS OF 04 ITEMS IN 100 NOS.
(1) Inside wash basin as per RCF Drawing no. EH63047 FOR LHB AC ECONOMY coaches.Note-50%LH & 50%RH. (2)out side wash basin for LHB AC Economy coaches as per RCF Drawing No. EH63048.
03 Phase, 190V AC, Double inlet centrifugal blower assembly complete with mounting bracket to RCF Spec. No. EDTS-432, Rev. Nil, Corrigendum-1. Fan unit should be supplied complete with connecting cable alongwith male-female type cage clamp terminals with preceding ground terminal to cat no. 721-604/000-042 and 721-104/026-000 of M/s WAGO or equivalent approved make for termination of coach wiring.
LED based twin beam head light for DEMU/DPC as per RDSO Spec. No. RDSO/2017/EL/SPEC/0134 (Rev.2) or latest.
Cordless drill driver machine battery operated with 1/2-inch chuck size, battery voltage: 18 V (Lithium ? Ion), Chuck capacity: 1.5 (min) / 13mm(max), Screw diameter: 10 mm with two batteries, charger and carrying case equivalent to Bosch Model No. GSR 185 Li ProfessionalMake acceptable: Bosch, Dewalt,Milwaukee, Makita.OEM or authorized dealer only to quote with documentary evidence.
Hex socket head cap screw M 12 x 45 high tensile as per IS: 2269/2006 and IS:1367(Pt. 3)/2017, CE , property class -10.9, coating as per RCF Specification - MDTS-057. Grade & make should be clearly embossed at suitable location of material (on head of screw) for easy traceability & verification.
Set of MEDHA spare Parts for 1600 HP DEMU/DPC as per annexure-A. One set consisting the following : - (1) APC Duct Filter - SP648V21051 , Qty. - 02 Nos. (2) Inverter Duct Filter - SP648V22022 , Qty. - 04 Nos. (3) TM air filter set for one DPC - SP648V27119 , Qty - 08 Nos (01 SET). (4) Cable Gland for 32 mm - SP648V24063, Qty - 04 Nos.
Ungalvanized Round Steel Wire Rope Dia-13mm , Non-Rotating(or anti-twist) With high Carbon Steel Core , Construction Size- 18 x 7 , Tensile Strength 1770 N/mm2 AS PER IS: 2266 or latest With Valid Test Certificates Of Government Approved Agency Suitable for hydra Crane
WEARING PLATE FOR SIDE BEARER TO DRG.NO. EMU/M-0-5-047 ITEM -01 ALT. E OR LATEST MATERIAL AND SPECIFICATION AS PER DRAWING.
Copper Tubular Crimping Socket for 25 sq mm E-Beam Cable and with M10 Stud hole, as per EDTS-200, AM-2, Corr.-3, Table-1, item-13.
HEX NUT M8 PREVAILING TORQUE TYPE TO PROPERTY CLASS 10, DIN- 6925/DIN980V, IS: 1367-2002 PT-8, 10, A3B. this item should be procured from TVS,TUFF,DFL,UNBRAKO and RDSO approved vendors for axle end steel high tensile cap screw.
28 Ltr dual bucket plastic heavy duty housekeeping trolley with 100 ltr flexible garbage attachment with lid, mop handle, mop and microfiber mop cloth and two small buckets near top of trolley for keeping housekeeping consumables and cleaning solutions. Roots model TT6183 Nickstar 60 (28 ltr) along with aluminum 140 cm handle, mop and microfiber mop cloth or similar model of Taski or Johnson Diversary or Unger.
Plastic heavy duty 30 ltr capacity dual bucket wet cleaning professional trolley with wringing arrangement, aluminum telescopic mop, mop handle, mop holder & microfiber cloth or equivalent Taski or Johnson Diversey. Model- Unger model COMBR 30 or Roots Nickita tech Green (2x15 ltr) model 57902004
Vacuum Valve G-1/2 inches to RCF Drg.No.LW63150, Item-3, Alt-e (for roof water tank 30 Litres mounting of LHB coaches) .
CIRCULAR SAW BLADE(CARBIDE TIPPED) DIA184MMXBORE25.4MMXTHICK2MMX60T,WITH REDUCTION RING 16,19,20 MM MAKE BOSCH ,DEWALT,MAKITA,OPTIMAL OR EQUIVALENT .
(1) BATTERY BOX MOUNTING FOR LHB COACH AND 9 HOLES OF DIA 25MM AS PER SKED -383 IN DRG. NO. 3 10113.0.76.700.117, 110113.0.76.700.005 (EXCEPT ITEMS- 5, 22, 23, 25 TO 27) ALT- CR & BOM DRG. 110113.0.76.700.005, ALT- D. (2) BATTERY BOX FOR LHB NON-AC COACHES (120 AH VRLA BATTERIES) TO DRG.NO.CC 91205 ALT-a.
Digital Microscope Machine - complete Microscope with stand, light and flexible arm (1.) CMOS sensor-2M pixels or better (2.) Signal Output- Full HD 1080p & 60 fps or better (3.) Focus- IR Remote Control Auto Focus System(4.) Power Supply- DC 5V/2A, Cable Length 180 cm (5.) Auto Focus- Through infra-Red Remote Control (6.) Stand-Suitable for Variable Working Distance (7.) Monitor- 24 HD Monitor (8.) Special Image Effect- (A) EXPOSURE: Shutter, defogreal time image processing, (B) BACKLIGHT: Wide Dynamic Range, Noise Reduction, (C) MIRROR: Left/Right, Up/Down and 180-degree horizontal Rotary, (D) SMART D-ZOOM: Reverse image & image stabilization system, (E) MOTION: Detect moving object. (9.) Magnification- 3x-43x on 24 monitor (10.) Working Distance- 20mm-300mm (11.) Field of View- 11- 142mm (12.) Lens- C-Mount Lens (13.) Light Source- Gooseneck light, adjustable
Hex Head Screw M10x25 Stainless Steel as per IS:1364(Part-2)-1992,A2-70 to IS:1367(Part-14)-1984,CE, Packing instruction-PI001.
DAMPERS FIXING BOLTS AND NUTS WASHERS ICF DRG. No. DMU/DPC 5-0-5-510,ALT- G OR LATEST ITEM NO. 18,19,20,21,22 (ITEM 18-08 Nos, 19-24 Nos,20-24 Nos, 21-24 Nos, 22-12 Nos) 18,19,20,21,22=01 Set
Indicator restriction(Hydraulic Sensor) for 1600HP DEMU /DPC.Part No:5559388 , HSN Code-8481200 ACCEPTED MAKE- CIL or REXROTH
Supply of One Set of PU Paint (Two Pack) for SPIC(Parakh) as per RDSO Spec.No. M&C/PCN/100/2018 with Amendment IB (REV-2.0) as an additional requirement. One Set consists of PU Paint Coral Red, RAL-3016, 35 Litres and PU PAINT PAPYRUS WHITE METALLIC FINISH, RAL-9018, 80 Litres.
1) OVERHAULING KIT FOR BRAKE INDICATOR-DOUBLE FOR LHB COACHES TO ESCORTS DRG NO. 2EB 6612 CONSISTING 05 ITEMS AS PER ANNEXURE ATTACHED 2) Overhauling kit isolating cock for BC1, BC2, FP & CDTS to Escorts Drg.No. 4EB 10913 as per Annexure ? 1 attached. 3) KIT SET OF FILTER & CHECK VALVE FOR ESCORTS MAKE LHB COACHES. (1) REPAIR KIT FOR AIR FILTER CONSISTING OF 04 ITEMS AS PER ANNEXURE-A TO ESCORTS DRAWING NO- 3EB 5655. (2) REPAIR KIT FOR CHECK VALVE ASSEMBLY CONSISTING OF 03 ITEMS AS PER ANNEXURE-B TO ESCORTS DRAWING NO.4EB 5664. 4) Repair kit for Test Fitting , ESCORT DRG. No-( 4EB5681) 1J112010520 As per annexure , set consisting 05 items. Make/Brand- Escorts Kubota Limited.
Repair Kit for Slack Adjuster type IRSA 600 consisting of 03 items confirming to RDSO Spec. No. 07-ABR-1992 with amndt. No. 5 of Sept. 2016. 1). Take up Spring to RDSO drg. no. WD-82064-S-04-RC, Alt.-6, item no.-1, Qty. 01 No. 2). Clutch Spring to RDSO drg. no. WD-82064-S-04-RC, Alt.-6, item no.-3, Qty. 01 No. 3). Lock Screw to to RDSO Drg. No. WD-82064-S-09 RC, Alt.-8, Item No.5, Material conforming to IS: 2062- 2011, with amendment No.1 of Nov 2012, Grade : E 250 A. zinc plated.Qty. 04 Nos.
(1) Supply of water pressurizer unit (with input/output assy, connectors, leg brackets) for left side lavatory designed for pressurised flushing system fitted in LHB coaches, similar to item code SPAC0018975 of SPAC Make OR Similar to NORGREN/Air flow-Genetic/Shree Prayag Make. (2) Supply of water pressurizer unit (with input/output assy, connectors, leg brackets) for right side lavatory designed for pressurised flushing system fitted in LHB coaches, similar to item code SPAC0018974 of SPAC Make OR Similar to NORGREN/Air flow-Genetic/Shree Prayag Make
Hex. Head Bolt M24 x 200 to IS:1364(Pt.-1)/2023, IS:1367(Pt.-3)/2017, CE , property clas s - 10.9, coating as per RCF Specification - MDTS-057 . Grade & make should be clearly embossed at suitable location of material (on head of bolt) for easy traceability & verification.
1) Metal Cutting Disc 14 inch for ferrous metal cutting (chop saw) as per annexure-1 (C). 2) Grinding wheel portable cut-off outer diameter 4 inch as per annexure-1(B) 3) Metal stainless steel cutting wheel/disc 4 inch as per annexure-1 (A).
1 5 PIN RIGHT ANGLE CONNECTOR MALE PART NO. MG 08F 14S-5P V0 SS or Similar 2 PINS ELECTROPLATED FOR DEMU/DPC TO ICF DRG. NO. EMU/M-3-2-065, ALT-a/NIL or Latest, ITEM NO. 5. MATERIAL AND SPECIFICATION AS PER DRAWING. 3 PINS ELECTROPLATED FOR DEMU/DPC TO ICF DRG. NO. EMU/M-3-2-065, ALT-a/NIL or Latest, ITEM NO. 7. MATERIAL AND SPECIFICATION AS PER DRAWING. 4 PINS ELECTROPLATED FOR DEMU/DPC TO ICF DRG. NO. EMU/M-3-2-065, ALT-a/NIL or Latest, ITEM NO. 1. MATERIAL AND SPECIFICATION AS PER DRAWING 5 PINS ELECTROPLATED FOR DEMU/DPC TO ICF DRG. NO. EMU/M-3-2-065, ALT-a/NIL or Latest, ITEM NO. 2. MATERIAL AND SPECIFICATION AS PER DRAWING. 6 PINS ELECTROPLATED FOR DEMU/DPC TO ICF DRG. NO. EMU/M-3-2-065, ALT-a/NIL or Latest, ITEM NO. 3. MATERIAL AND SPECIFICATION AS PER DRAWING.
1) Air Lube UT Synthetic Part No- 000998102 For ELGI Screw Compressors 2) Air Filter Element Part No- B004700770036 suitable for ELGI screw Compressor model No. EG160-9 P 3) OIL FILTER ELEMENT -75 LPM Part No-B004800770001 For suitable for ELGI screw Compressor model No. EG160-9 P 4) AIR OIL SEPARATOR ELEMENT Part No-B006700770018 For suitable for ELGI screw Compressor model No. EG160-9 P 5) AOS GASKET Part No- B006700770028 suitable for ELGI screw Compressor model No. EG160-9 P 6) PRE FILTER Part No- 015403266 suitable for ELGI screw Compressor model No. EG160-9 P
TITANUS PROSENSE UNIT HAVING J K EXIM PART NO. JK-FDSS-1156.
Cattle Guard for DEMU/DPC as per Drawing No-DMU/DPC 5-2-6-501,Col-1,Alt d or Latest