Materials Management Tenders

CO110080642: M24X140 HEX. HEAD BOLT- 10.9 IS: 1364 & NUT-10 IS: 1364 WITH 2 WASHERS IS: 6649 DRG: DCME/, CO110080640: M24X120 HEX. HEAD BOLT- 10.9 IS: 1364 & NUT-10 IS: 1364 WITH 2 WASHERS IS: 6649 DRG: DCME, CO110080641: M30X160 HEX. HEAD BOLT- 10.9 IS: 3757 & NUT-10 IS: 6623 WITH 2 WASHERS IS: 6649 DRG: CME 84

SPEED MONITOR MODULE, P+ F Make, Model: KFU8-FSSP-1. D, Zero Speed Control Unit For Blowers, P+ F Make, Model: KFD2-DWB-1. D, INDUCTIVE SENSOR, P+ F Make, Model: NBB20-U1-Z2, ZERO SPEED CONTROLLER, P+ F Make, Model: KFU8-DW-1. D

CS ERW TUBES OF DIA. 50.8 MM X 2.08 MM TKX 7180 MM LENGTH AS PER BS 6323, PT-5, ERW2, GZF FOR TAPH

VACUUM PUMP WITH MOTOR for Generator Seal oil system

Polyurethane pneumatic tube. Size: 8mm ODx 5.5mm ID

TRANSMISSION OIL SUITABLE FOR ALLISON TRANSMISSIONS

ABB Make Spares

PH ELECTRODE WITH GLASS BODY

SPIDER PROFIBUS COMMUNICATION MODULE AB4001-B ANYBUS HMS

Facility Management Services - LumpSum Based - As per ATC and Special Conditions; As per ATC and Special Conditions; Consumables to be provided by service provider (inclusive in contract cost)

PROXIMITY SENSORS

THRUST BEARING HOUSING ASSLY

ID FAN - LINER ASSEMBLY FOR 8 INCH DODGE MAKE RTL BEARING 132427

FLOWMETER, MAGNETIC, 240VAC, 200MM 51010101350246

EXCITER, TYPE: DF401S

STACKING ASSEMBLY, PN: 481937, HYDAC

Disinfectant Fluids, Phenolic Type (V5) conforming to IS 1061 (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

ROLLER ASSEMBLY, CONV-14-011 FOR CRD SYS

SIMOCODE PRO V, 3UF7 010 1AU00 0, SIEMENS

Custom Bid for Services - Maintenance and Repair Contract MARC of BEML make HEM Equipments deployed in different mines of IOC through Ms BEML Similar Category Customized AMC/CMC for Pre-owned Products

RESIDUAL CURRENT CIRCUIT BREAKER/ELCB, 415VAC, 100A, 4P, 10KA, RCCB

Site Mixed Bulk Explosive Cast Booster

NONEL DTH 72810100080340, NONEL TLD 72810100080339, ORDINARY DETONATOR 72810100120017, CORD RELAY 72810000160010

RX3I CPE330 W/ENERGY, IC695CPK330, EMERSON 57611009000597, DO CARD FOR PLC, PN: IC694MDL758, EMERSON 57670007009052, ANALOG INPUT MODULE, IC695ALG616, EMERSON 57610709003225, AUX SMART BATTERY, PN: IC695ACC302 57610709003507

SM455320042 50 GPM Pump Bush for NRV 18.8 ID x 25.5 OD x 25 Length, SM455320043 50 GPM Bush for S case 25.5 ID x 32 OD x 32 Length, SM455320027 50 GPM Pump Shaft protecting SS sleeve ID-19 mm x OD-25.5 mm L-68 mm, SM455320028 50 GPM Pump Shaft protecting top sleeve ID-19 mm x OD-25.5 mm L-106.5 mm, SM455320041 50 GPM Pump Bush for bowel 25.5 ID x 35 OD x 32 Length, SM455320025 50 GPM Pump Shaft protecting Bottom sleeve OD 25.5 mm x ID 19 mm x L- 124mm, SM455320033 15HP Bush for Lower Housing 15HP ID30XOD38X25L for Submersible Motor, SM455320031 15HP Bush for Upper and Lower Housing 15HP ID30XOD38X43L for Submersible Motor, SM455320034 15HP Rotor Front Shaft Sleeve OD31.5 x ID25 x L-115, SM455320035 15HP Rotor Front Shaft Sleeve OD31.5 x ID25 x L-38, SM455320032 15HP Rotor Front Shaft Sleeve OD31.5 x ID25 x L-160

BRAKE ASSEMBLY ALONG WITH THRUSTER, SIBRE 50910001050189

HOT DIP GALVANIZED STEELSERRATED FLOOR GRATINGS (Q3)

Facility Management Services - LumpSum Based - As per ATC; As per ATC; Consumables to be provided by service provider (inclusive in contract cost)

Portable Hardness Tester (Q3)

Supply, Installation and Commissioning of Ventilation and NBC Filtration System

COMPLETE SET OF SPACER BAR, TUBE ASSEMBLY WITH LOCK NUTS, AND LOCK WASHER

Porcelain DISC INSULATORS 11KV, 120 KN, HAVING DIA 200mm

SM489330005-TILT SENSOR for CCRD AND PCRD drives control in SME machines and Transport Crawlers

Low cement Refractory castables LCRC-50

MODULE, REDUNDANCY LINK, 3BSE091723R1, ABB 57670007004692

Antiwear Hydraulic Oil, Extra Heavy Duty Type (V3) Conforming to IS 11656 (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Participation restricted to Government seller Yes (This bid is reserved for participation only by Government sellers and hence Government sellers will be exempted from payment of Transaction charges)

Supply of Joint closures

STEEL LADLE REFRACTORY SET ON TOTAL LADLE MANAGEMENT (TLM)

Safe Deposit Locker Cabinetsconformingto IS5244 (V2) (Q2)

MOD CURVED LINER LEFT SIDE, SP3-22-091

MODIFIED CAGE BAR-1, DWN: SP3-25-059

SITC CCTV

Custom Bid for Services - Routine Running Maintenance and Production activities at C&S Plant Rajhara Similar Category Mine Development and Operation Service- Lumpsum Based

Custom Bid for Services - Facilitation of Drilling Operation at Kuteshwar Limestone Mines Similar Category Mines/Minerals Drilling

PIPE, CS, S235G2T DIN EN 10220, 273MM, 6.3MM 71301000401831, GRB ASTM A106, 323.8MM 71301000400086

Procurement of Heater and Deaerator Safety valve spares

SC050180107 - DE SLEEVE BEARING (DIA 125) OF 1200 KW, PA FAN MOTOR, SC050180108 - NDE SLEEVE BEARING (DIA 100) OF 1200 KW

TOP DESCALING MANIFOLD WITH NOZZLE ASSLY, LEFT/RIGHT DESCALING MANIFOLD W/NOZZLE, BOTTOM DESCALING MANIFOLD W/NOZZLE ASSLY

Artificial Intelligence Dental scanner

Works contract for Fabrication of LP Inner Casing at BHEL FSIP, Jagdishpur under Framework Agreement