Ministry Of Coal Tender Results

BH100 DUMPER SPARES

Supply of spares for AFDSS of CAT equipments Tata

Anaesthesia Workstation (V2) (Q2) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number : GEM/2025/B/6310480 Dated : 20-06-2025 Bid Document 1/16 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 3750000 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 75000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 4 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : SECL Gevra Area SOMM OFFICE OF THE GENERAL MANAGER SECL GEVRA AREA KORBA CHATTISGARH PO- GEVRA PROJECT SECL Bilaspur Chhattisgarh, COAL INDIA LIMITED, South Eastern Coalfields Limited, Ministry of Coal (Secl Gevra Area) Splitting

High Pressure Washer (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 7, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6528122 Dated : 13-08-2025 Bid Document 1/6 Bid to RA enabled Yes RA Qualification Rule 50% Lowest Priced Technically Qualified Bidders Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 24 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : GM Materials Management, Materials Management, NLC India Limited, Ministry of Coal (Unit Head) Splitting

Horizontal Autoclave (Q2) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number : GEM/2025/B/6310267 Dated : 20-06-2025 Bid Document 1/16 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 1454997 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 29100 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 4 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : SECL GEVRA AREA SOMM OFFICE OF THE GENERAL MANAGER SECL GEVRA AREA KORBA CHATTISGARH PO- GEVRA PROJECT SECL Bilaspur Chhattisgarh, COAL INDIA LIMITED, South Eastern Coalfields Limited, Ministry of Coal (Secl Gevra Area) Splitting

Custom Bid for Services - Removing, gathering and stacking of coal/slush/loose earth/muck etc deposited in and around peripheral and surrounding areas of CHP conveyor structures, Drive houses, Transfer Houses, take up structures etc by both mechanica.. Similar Category Hiring of Earth Moving Equipments, Material Handling Equipments and Cranes (per Hour basis)

Custom Bid for Services - Electrical Repairing/rewiring of Office buildings Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations

Supply of automation spares for diesel bowser at Lingaraj

GLAND SEALING KIT FOR LRALF

Monthly Basis Cab and Taxi Hiring Service - Without Fuel - Premium SUV; Toyota Innova Crysta, or equivalent vehicle; Age of the Vehicle should not be more than 03(three) years as on the date of opening of tender; 0-25, 000 kms; A/C; 12

HEAD LAMP

Steel Pipe Flanges as per IS 6392 (Q3) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience Yes | Complete

LOCK NUT FOR BEARING, LOCK WASHER FOR BEARING, SHAFT COLLAR N D E, WEARING RING CASING, SHAFT SLEEVE, STUFFING BOX BUSH, WATER SEAL RING LANTERN RING, PACKING PCS STYLE NO 3116, GLAND HALF, GREASE RELEASE FITTING, DOWEL PIN, PIPE NIPPLE CASING GLAND DRAIN, COLLAR INTER STAGE, BUSH INTER STAGE, GASKET FOR CASING, SPR DOWEL SLEEVE CASING, HX HD CAP SCREW WITH WASHER, STUD BOLT WITH NUT and WASHER CASING, GREASE RELIEF FITTING FOR BRG COVEr, PIPE PLUG FOR BRG COVER NDE, O RING SHAFT TO SHAFT SLEEVE, STUFFING BOX COVER D E and N D E, STUD BOLT W by NUT WSHR BRG HSG ST BOX CVR, OIL SEAL FOR BRG HOUSING, OIL SEAL FOR BRG COVER AT D E, PIPE PLUG FOR BRG HOUSING, ROTATING ASSEMBLY 2STG, COLLER INTER STAGE, WATER DSEAL TUBE, WATER SEAL RING, SHAFT COLLAR, COVER FOR BRG HOUS NDE, SLEEVE NUT N D E, KEY PUMP HALF COUP, BEARING BRACKET HOUSING N D E, CINCH FITTING, GASKET SHAFT SLEEVE TEFLON, PIPE PLUG, EYE BOLT, STUFFING BOX BUSHING, STUD BOLT WITH NUT CASING TO GLAND, HEX HD BOLT NUT and WSHR BASE TO CASING, PIPE PLUG VENT by PRIMING CONN, COVER PLATE OUTER BRG COVER NDE, WEARING RING IMPELLER, PUMP SHAFT, BEARING BRACKET HOUSING D E, COVER FOR BRG HOUS D E, ROTATING ASSEMBLY BRONZE, ROTATING ASSEMBLY COMPLETE

Custom Bid for Services - Selection of Practicing CA for certification of Form 15CB in relation to dividend payout Similar Category Financial Advisory Services Hiring of Consultants - Milestone/Deliverable Based

ST030270004 ACW Pump of pump model 20LN22A SI No HH-30037-40-Pump shaft Part No 1100 Drawing No CSD-HH- 30037-40-B, ST020150004 Shaft sleeve Material ASTM A 890 Gr CD4MCuN for COLTCS pump Model No 4 x 3 -10 HNC-2KNC of Microfinish make as per drawing no No P- 2KNC-01-Rev 0 and Item no 14 pump serial no 39616, ST020430049 ACW Sleeve Nut as per NTPL drg no.NTPL-TM- ACW PUMP-003-2019, ST020100404 CEP Snubber as per NTPLs Drg no NTPL-TM-CEP-SNUBBER- 01-004-2025, ST020100405 CEP Thrush Washer as per NTPLs Drg no NTPL-TM-CEP- THRUSH WASHER -01-005-2025, SC110471418 Adapter for HPH 5A 5B Extraction valve as per NTPLs Drawing no NTPL-TM-091-2020, ST020130046 Debris Fitter Shaft connecting rod as per NTPLs Drg no NTPL-TM-DEBRIS- CONNECTING ROD -01-006-2025, ST030270014 Cross Head with part No 45-PA-16 for HP Dosing pump model MC-4RL 100LPH-225Kg-cm2g Plunger Dia 20mm-100spm DBV-5.6 as per NTPLs Drawing no NTPL- TM-Phos Dosing-007-2019, ST030270023 Control Shaft with part no 45-PA-21 for HP Dosing pump model MC-4RL identical 100LPH-225Kg-cm2g Plunger Dia 20mm-100spm DBV-5 6 as per NTPLs Drawing no NTPL-TM-Phos Dosing- 005-2019, ST030270024 Bearing Retainer with part no 45- PA-30 for HP Dosing pump model MC-4RL 100LPH-225Kg- cm2g Plunger Dia 20mm-100spm DBV-5 6 as per NTPL Drg no NTPL-TM-Phos Dosing-008-2019, ST030270025 Retainer Washer with part no 45-PA-31 for HP Dosing pump model MC-4RL 100LPH-225Kg-cm2g Plunger Dia 20mm-100spm DBV-5 6 as per NTPL Drg no NTPL-TM-Phos Dosing-010-2019, ST030270015 Plunger with part no 45-PB-PL-01 for HP Dosing pump model MC-4RL identical pump 100LPH-225Kg- cm2g Plunger Dia 20mm-100spm DBV-5 6 as per NTPLs Drg no NTPL-TM-Phos Dosing-009-2019, ST030270043 Eccentric with part no 25-PA-13 for LP Dosing pump model MC-2RL identical pump 53LPH-45Kg-cm2g Plunger Dia 30mm- 100spm DBV-4 8 as per NTPLs Drg no NTPL - TM - 021 - 2019, ST030270040 Bearing Retainer part no 25-PA-30 for LP Dosing pump model MC-2RL identical pump 53LPH-45Kg- cm2g Plunger Dia 30mm-100spm DBV-4 8 NTPLs Drg noTM - 023 - Hyd Dosing8 - BEARING RETAINER, ST030270041 Retainer Washer with part no 25-PA-31 for LP Dosing pump model MC-2RL identical pump 53LPH-45Kg-cm2g Plunger Dia 30mm-100spm DBV-4 8 as per NTPLs Drg no NTPL-TM- Hyd Dosing-010-2019, ST030270035 Teflon washer for Valve part No 25-PB-TW-01 for LP Dosing pump model MC- 2RL identical pump 53LPH-45Kg-cm2g Plunger Dia 30mm- 100spm DBV-4 8 as per NTPLs Drg no NTPL - TM - 027 - 2019, ST030271265 Cross Head for ammonia Dosing as per NTPLs Drawing no NTPL-TM- 088- 2020, ST030270037 Thrust Ring with part no 25-PA-18 for LP Dosing pump model MC-2RL identical pump 53LPH-45Kg-cm2g Plunger Dia 30mm-100spm DBV-4 8 as per NTPLs Drawing no NTPL-TM- Hyd Dosing-001-2019 Bid Details 2/21

Handling, Transport and Other Mining Services - Percentage quote based - Handling & Transport Service, Coal loading and transport at Silewara UG Mine of Nagpur Area

Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Audiometry Technician; Diploma, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Pharmacist; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Physiotherapist; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Staff Nurses; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Dresser; As per scope of work

Multifunction Meter

GUIDE SHOE HEAD Part no 5845, REAR INJECTOR ASSLY Part no 10026561005, HOSE PL300 NW4 1 HIGHFLEXIBLE DG Part no 111351141, NEEDLE Part no 14722, VALVE SEAT Part no 14723, PUMP STATION ASSY Part no 22337000153, CRANK ECCENTRIC Part no 270666, SOLENOID VALVE CARTRIDGE Part no 270678, SOLENOID VALVE CARTRIDGE Part no 270690, PRESS REDUCING VALVE Part no 270692, FLOW CONTROL VALVE Part no 270693, PRESSURE GAUGE Part no 270768, BALL CAGE Part no 272179, SAFETY VALVE Part no 272722, KIT HYDRAULIC MOTOR Part no 274054, LOWER BUSHING AND PLUNGER Part no 275002, REPAIR KIT Part no 275186, SOFT PARTS KIT Part no 275383, PUMP HOUSING Part no 278230, MOTOR Part no 278661, SOLENOID VALVE Part no 525320831, GREASE REFILING PUMP ASSY Part no 6040062013, RELAY KIT 20A FOR BH606090000273 Part no 6090000273, HOSE ASSLY 1 by 2 inches ID Part no 6096023503, 1 BY 2 IN HOSE ASSY 4400MM Part no 6096044003, TIMER GN50A Part no 6097005034, 04 INJECTOR WITH MANIFOLD Part no 6640010403, FITTING ASSY Part no 6641011004, PRESSURE SWITCH Part no 69630, HOSE REEL ASSY Part no 6980010001, VENT VALVE Part no 84980, VENT VALVE ASSY Part no 84990, CONTROLLER Part no 85535, ELECTRIC FLOW MASTER PUMP 085587 20LTRS. Part no BH606761260012, ELBOW 1 by 8 BSP Part no H191514229, STRAIGHT UNION Part no H201501029, STRAIGHT UNION Part no H201501089, STRAIGHT Part no H201512349, STRAIGHT FTG GE 16S 1 by 2 inches NPT GAL YELLOW Part no H201512449, PRESSURE GAUGE Part no H222417041, HOSE Part no H252200099, HOSE Part no H252204199, BALL VALVE 3 by 8 inches Part no H601909037, STRAIGHT FTG XGE 6L 1 by 8 inches BSP Part no H841508229, STRAIGHT FTG XGE 6L 1 by 8 inches NPT Part no H841512229, ELBOW FTG XWE 06L 1 by 8 inches NPT BODY Part no H841518229, COUPLING NUT MO6S Part no H851507029, FERRULE Part no H861304029, ADAPTER Part no M991050350, HOSE SLEEVE Part no X432230311, HOSE STUD Part no X432241621

ST020340014 MAIN STEAM STRAINER PRESSURE SEAL GASKET OD 505 X ID 465 X THICK 40mm MATERIAL PURE Graphite Carbon content Greater than 99.5 Percentage Density of gasket 2gm per cc, ST020391518 MAIN STEAM STRAINER PRESSURE SEAL GASKET OD 505.1 X ID 465 X THICK 40 mm MATERIAL PURE Graphite Carbon content Greater than 99.5 Percentage Density of gasket 2gm per cc, ST020340015 HRH STEAM STRAINER PRESSURE SEAL GASKET OD 910 X ID 875 X THICK 35mm MATERIAL PURE Graphite Carbon content Greater than 99.5 percentage Density of gasket 2gm per cc, ST020391517 HRH STRAINER PRESSURE SEAL GASKET OD 910.1 X ID 875 X TH 35mm Mat. PURE Graphite Carbon content 99.5 Per. Density 2gm per cc Gasket shall be Reinforced with 0.03 to 0.3mm SS Sheet, ST020350450 Graphite packing ring Outer Dia 950 X Inner Dia 880 X Thickness 41.6mm to withstand Pressure Temp of 300 KSC 600 Deg Celsius, ST020391516 Graphite packing ring Outer Dia 950.1 X Inner Dia 880 X Thickness 41.6mm to withstand Pressure Temp of 300 KSC 600 Deg Celsius, ST020260006 Spiral Wound Gasket C Type Without Inner Outer Ring Winding SS304 L Filler Flexible Graphite Spiral Wound Gasket 183 mm X 162 mmX 4.5 mm, ST020260004 Spiral Wound Gasket C Type Without Inner Outer Ring Winding SS304 L Filler Flexible Graphite Spiral Wound Gasket 313 mm X 293 mmX 4.5 mm, SC110390753 serrated gasket for LP Bypass SV, SS316L core with spiral serrations and graphite layers, spiral-wound size 625.5X595X3.5 mm, 2.5 mm metal, 0.5 mm graphite each side., SC110390752 gasket for LP Bypass CV, SS316L core with spiral grooves and graphite, spiral-wound 484.5X460X3 mm, 2 mm metal, 0.5 mm graphite each side., ST020350451 gasket 269.5X245X3 mm, 1.4541, SS316L serrated core with 2 mm metal and 0.5 mm graphite each side for LP Bypass Spray CV, CO350110450 Packing ring for LP Bypass stop valve Dia 132mm X 100 mm X16 mm, ST020391515 Graphite packing ring Outer Dia 38 X Inner Dia 26 X Thickness 6 mm, ST020391520 Spiral wound Gasket C Type without inner and outer rings OD 695 X ID 645 X Thickness 8mm Winding SS 304 L Filler Flexible Graphite, ST020391519 Spiral wound Gasket C Type without inner and outer rings OD535 X ID 500 X Thickness 4.5 mm, Winding SS 304 L Filler Flexible Graphite, ST020391521 C type spiral wound gasket, no rings, SS mesh, rated 190 KSC and 540 Deg, size OD680XID240X4.5 mm for ASV.EXV.CSV valves, ST020391514 Grafoil Bonnet Gasket of size OD 340x ID 308 xThickness 28.7MM, ST020391522 Grafoil Bonnet Gasket of size OD 370x ID 338 xThickness 27.7 MM, ST020391513 Carbon Fiber Packing 12mm Bid Details 2/22

Automatic Line Voltage Correctors (Step Type) For Domestic Use (Stabilizer) Conforming To IS 8448 (Q2), Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience Yes | Complete

Leasing of Electric Vehicles (Long Term) - Wet Lease; Mahindra XUV 400 EL Pro, Tata Nexon Fearless 45 EV, TATA NEXON EV - MAX; 2500km per month, single driver with staggered rest; 36 Months Lease; White

Roller Screen Intermediate Shaft Gear Coupling With Bolt Nuts

DOUBLE REDUCTION RIGHT ANGLE SPIRAL DRIVE BEVEL HELICAL GEAR BOX ASSEMBLY FOR CT FAN (MODEL-B222), BEVEL GEAR PAIR FOR COOLING TOWER FAN GEAR BOX., SECOND STAGE PINION FOR COOLING TOWER FAN GEAR BOX, OUTPUT SHAFT FOR COOLING TOWER FAN GEAR BOX.

Hoist Socket, Socket and Drag Socket Assy., Drag Socket Left, Socket and Drag Socket Assy. And Drag Socket Right, Socket and Drag Socket Assy., Drag Chain Proseries Chain, Chain Assy., Lower Chain 212SS9 Chain, Chain Assy., Upper Hoist 212PP10 Chain, Chain Assy., Dump Chain 212SS4 Chain, Chain Assy., Hoist Equal, Upper Hoist Assy Of 4280656, H-Link, Upper Hoist Assy Of 4280656, Hitch Extension, Hitch Extension Assy.

Handling, Transport and Other Mining Services - Percentage quote based - Handling & Transport Service

Custom Bid for Services - NTPL Construction of UG sump and 50KL RCC Overhead tank at NTPL plant Similar Category Support Services

SC540010033: 800mm Width 3PLY EP BELT As Per Specification

Professional Training Services (Version 2) - offline; Weekdays

Custom Bid for Services - Changing of Seat in Turbine HP Bypass spray water Pressure/Temperature control valve BD/BPE (E32S) and HP bypass Main Steam (BP) valve (ARS100, DRE 90) in TPS II stage I & stage II units Similar Category Repair and Overhauling Service

CO030100251: Seamless tubes of OD 57 MMX 8 MM Thick- IN LENGTH OF 4 TO 7 MTRS, Material SA 209 T1, ST010430408: SEAMLESS TUBES OF OD 44.5 MM X 8MM THICK IN LENGTH OF 4 TO 7 MTRS- MATERIAL SA 210 GRA1

ID FAN DE SIDE BEARING ASSEMBLY CONSIST OF 1 NO. (2 HALVES) 7" XC, DE SIDE LINER ASSEMBLY FOR ID FAN, ID FAN GROMMET RUBBER GASKET FOR 7" XC BEARING, GROMMET KIT FOR ID FAN SLEEVEOIL BEARING 7" XC

Custom Bid for Services - Replacement of Under Carriage set in D155 Dozer Sr no 13997 of Mungoli OCM Similar Category Repair and Overhauling Service

SPRING SEAT PLATE GUIDE TRUNION SHAFT LUBRICATOR COVER CAP RH

Short Term Cab & Taxi Hiring Services - SUV; Local; 150 kms x 12 hrs

Repair and Overhauling Service - Potable water purification system Reverse Osmosis or UV based; Operation and maintenance of Existing RO Plant; Yes; Buyer Premises

Radiator Assy of BH60 Dumper, Radiator Assy of D155 Dozer, Radiator Assy of WS28 Water Sprinkler

Procurement of Tricone Rock Roller Drill Bits

Security Manpower Service (Version 2.0) - Office/Commercial/Institutions/Residential; Unarmed Security Guard

Custom Bid for Services - Hiring of school Bus 936 days in 03 years(36 months) Similar Category Bus Hiring Service - Regular Basis

Monthly Basis Cab and Taxi Hiring Service - Without Fuel - SUV; AS PER

TRACK ROLLER ASSLY, Part No. 1027C050000005

Monthly Basis Cab and Taxi Hiring Service - Without Fuel - SUV; Mahindra Marazzo, Mahindra Bolero, Mahindra Scorpio; Maximum age of Vehicle as on the date of opening of tender from the date of 1st registration of the vehicle shall be 03 years; 50, 000..

OEM Pump Spares 175SR 8 Stage from Volcan Pumps India

Facility Management Services - LumpSum Based - Weighbridge at Ambika OCP under Korba Area; Cleaning and Upkeeping of 01 no Weighbridge at Ambika OCP under Korba Area (For Two Years) (Retender); Consumables to be provided by service provider (inclusiv..

Purchase of Hydraulic SOVs for Wagon Tippler and Stacker

Alumino - Ferric (V2) Conforming to IS 299 (Q3) MSE Relaxation for Years Of Experience Yes | Complete Startup Relaxation for Years Of Experience Yes | Complete

Custom Bid for Services - Providing drinking water supply to the houses and common amenities of R&R Colony Blocks A, B, C, K, D1 and E1 through vehicle mounted tankers from borewells available in R&R Colony, D1 and E1 through vehicle mounted tankers from outside source, Custom Bid for Services - Skilled Manpower (Pump Operator) Similar Category Hiring of Water Tanker Service Hiring of Water Tanker Service Hiring of Water Tanker Service

Handling, Transport and Other Mining Services - Percentage quote based - HANDLING, TRANSPORT AND CRUSHING OF COAL

V BELT-SPB 3350, V-Belt SPB 5070