NER-GONDA-DLS-STORES/NORTH EASTERN RLY Tender Results

Supply, Testing & Commissioning of High Pressure Hot and Cold Water Steam Jet Cleaning Machine as per specification attached in Annexure-I

Set of Safety sling for Air dryer as per ELS VSKP Drg no. ELS/VSKP/2010/32. One set consists of 06 Item 25 Nos as per annexure attached.

Supply of 1 Inch Sq. drive battery operated impact wrench with friction ring and One- Key technology have 4 mode drive control in HD tool box. Max Torque : 2033 Nm +/- 5%, Nut bursting torque : 2400 Nm +/- 5%, Approx weight with battery: 5.9 Kg +/- 5% ,Battery-02 Nos and Charger -01 No. Make: MILWAUKEE: Chicago, Pneumatic, Fugi, cooper, desoutter or similar.

Hydraulic bearing puller capacity- 15 Ton , spread- 350mm, reach-205mm, max stroke- 70mm

Safety Sling for main compressor of WAG-9/WAP-7 locos as per SC Rly. Drg. No. C/ELS/LGD/AUX/4/39 Alt- 1 . Note:- 1) One sample should be got approved before effecting bulk supply. 2) Load test certificate Obtained from Govt. approved labs must be submitted along with the material.

Fixed and Mobile contact Tips for C-118 contact as per Drg. No. ELW/BSL/4/WAM- 4/F90.248 ALT-1. (Ref 1&2 assembled) but item no. 2 composition for tips Copper- 30%, Tungsten-70% (Nickel Coated) in place of silver tips

SET OF 02 TYPES OF CONNECTORS. (1) CONNECTOR TYPE- MS 3101F 12S-3P A30- 05 NO/SET (2) CONNECTOR TYPE-MS 3106F 12S-3S A30 -05 NO/SET

Set of Modified hinge assembly for main door of Electric Locomotives as per Drawing No. B/TRS/CB/4/49 Ref no 01 to 05

MCB 2 Pole, Current rating 10A, Breaking Capacity 10kA voltage rating 200V DC as per Speen No. CLW/ES/3/0037 Alt. I Make ABB, Part No.SB202-C10DC or similar

Set of terminal cover as per Drg. No. BSL/TRS/SK/3/699, Set consists of (1) Cover bottom as per drawing No. BSL/TRS/SK/3/699(Ref-1). Qty-2 no; (2) Cover top as per drawing No. BSL/TRS/SK/3/699(ref-2). Qty-02 Nos

Hydraulic scissor lift platform trolley capacity-300kg. Specification as per given 1. Platform size-1200mmx700mm 2. Raised height-1800mm 3. Closed height from floor-300mm 4. Hydraulic hand pump opened 5. 2 swivel wheel & 2 fixed wheel

Supply and fitment of spare parts for ACE make fork lift S. No. ACEAF30DTP0612318 as per Annexure-A

Cover for cable of Electric locomotive, WAP7/WAG9 as per Drawing no- TRS/GMO/E4/3PH/ 057/ECR

Design, manufacturing and supply of High base stool with height adjustment and revolving facility as per specifications as below: 1)Top round seat base of total dia 410mm of 3/4" dia MS pipe circumference and perforated CRC steel sheet of thick 1 mm with suitable base support for perforated sheet. 2)Centre support MS pipe of 2 inch dia with bush arrangement for height adjustment sliding rod. 3)5 nos of equal spaced fabricated base lugs of 1.5mm thick MS sheet with bush at bottom of each lug.The overall circumference dia of base to be 550mm. 4) Free height of stool minimum 610mm and maximum 760mm. Height adjustment range 150mm with knob arrangement. 5)Final finished product to be painted with a coat of metallic primer and then 2 coat of spray paint with black enamel of satin finish

RECTANGULAR PIPE AS PER DRAWING NO. TRS/4/25.238 WITH 03 NOS. MS BOLTS OF 12 X 55 OF 4.6 HARDNESS AND 06 NOS. MS NUTS OF M12 SIZE

Set of Insulation Block for Cover of T/M [Set of Insulation Block for Cover of T/M. Each set consist of the following:(i) Insulation Block for Terminal Box Cover as per Drg. No. ELKP/SK-047. Qty.= 02 No.(ii) M12x35mm Bolt with 04 Nos. Flat washer & 02 No. Spring washer, 04 Nos

Supply and fitment of spare parts for ACE make fork lift S. No. ACEAF30DTP0612318 as per Annexure-A

PCU Kit Parts HRPV2 as per FTRTIPL Pt. No. E043116-SET36

Rheostatic Dynamic Braking Resistor (Vertical DBR) along with AC MVRF and AC Driven Cooling Blower as per RDSO Specn. No. ELRS/SPEC/DBR/0028 Rev 0 Sept 2003 with amendment 1, 2 and 3

Pigeon racks ( Staff Lockers) with 12 compartment as per drawing No. JHS/RS/4/SK.No.-769.

Air Piping + MED Assembly as per FTRTIPL Pt. no. FT0042411-103

Rubber gasket for relays as per drg. No. E/GD/TRS/03/225

Safety Bracket for terminal block as per drg. no. E/GD/TRS/02/751

Modified protection plate for Auxiliaries as per Drg. No. E/GD/TRS/05/125

1.COPPER TUBE 6.35 mm (1/4") O/D x 0.889 mm WT x 6 Mtr. long (weight/metre = 0.136 kg.). AS PER SPECN.NO. CLW/MS/3/030 Alt.-13 2.COPPER TUBE 6 mm O/D X 1 mm WT x 6 Mtr. Long (weight/metre = 0.140 kg.). As per Specn. no. CLW/MS/3/030 Alt.-13 , DRG NO. 1209-08.132-029 REF-2

1.Circuit resistance measuring instrument with mains power cord, mains protected fuse, a wire double probe test lead, kelvin clip test lead, rechargeable battery micro ohm meter (Motwane- LR2065S or similar); detailed specification as per Annexure-A 2.Insulation resistance tester 5KV with 6MA (Motwane: 5K-PI or similar); detailed specification as per Annexure-B

Hex Head Screw M24X100 High tensile. Material & specification: IS:1364 (Part -2)- 2023, CE - with Property Class 10.9 to IS: 1367 (Part -3)-2017, coating as per MDTS- 057

Earth Fault Relay Test Unit for Three Phase Locomotive. Details and Specification as per attached Annexure-A

Battery Box Ventilation Hose, Length: 1 MTR for WAP-7/WAG-9 locos as per CLW Drg. No. CLW/ES/3/SK-2/0099 and CLW Spec No. CLW/ES /3/0099 Alt-G, SHEET No-8

HYDRAULIC PUSHER & PULLER ARRANGEMENT AS PER ENCLOSED SPECIFICATION

1/4" Grease hose assembly x 2.2 metre

Capacitor as per Drawing No. B/TRS/CAP/4/12

Protection Cover for Traction Motor of conventional & 3 Phase Locomotive with excellent puncture burst and 100% water resistant HDPE Tarpauline sheet of 1000 micron made up of 100% Virgen raw material reinforcement with aluminium eylets as per Drg. No. M/GD/DSL/DRG-493

Set of snap action micro switch type K3-BO-330-08Y. make KAYCEE, ABB or Ferraz or similar (One set containing 10 Nos. micro switch)

Shank Wear Plate for Transition & Non Transition CBC to RDSO Drg. No. SK- 62724, Alt-28, Item-10 and RDSO Spec. No. WD-70-BD-10 (Rev. 3).

SET OF HOLDING PIPE BRACKET AS PER DRG. N0. WR/DHD/EL/4-PC-13

SB terminal 5mm, Bolt 2mm, 5mm nut, 4nos plain washer and spring washer copper link with separator and stud 1) terminal- 12 Nos, 2) Separator- 13 Nos, 3)Bolt 5mm- 24 Nos, 4) Nut-48 Nos, 5) Plain and spring washer- 24 nos, 6) Copper link- 12 nos

Loco conventional AC earthing circuit damping panel Specn./Drg. ELRS/SPECN/RSI/0030 (Rev-0) AMNDT. IIl and KPA Drg. No. ER/KPA/EL/CAP. 3G7. 2414

Set of nipple with collar as per Drg. No. C/ELS/LGD/ TM/ 3/ 59 Ref. 1 to 4

GAPLESS LIGHTING ARRESTOR FOR 25 KV , 50 HTZ AC ELECT LOCOMOTIVE SPECN. NO. ELRS/SPEC/LA/0005, JULY-1999 & CLW SPECN.NO. CLW/ES/SK-1/A-12 ALT-D AS ABOVE.

Wire Wound DC damping resistance 80 Kilo Ohms, 50 watt to KYN Drg. no. TACIA/7 with mounting arrangement

Set of insulator One set consisting of 02 items (i) MV 35/8, Qty.-50 Nos. (ii) MV 50/10, Qty.- 25 Nos.

INSULATING CAP FOR MOBILE CONTACT OF CAM TYPE REVERSER WITH MATERIAL GLASS EPOXY

TRACTION MOTOR BLOWER WITH MOTOR AS PER CLWS SPECN. NO. CLW/ES/3/0019/G FOR WAG9 TYPE ELECTRIC LOCOS