Loading
Loading…
Loading…
1,137 results • Latest
CBC Operating Handle Key/Universal Key for LHB Coaches Specification as per RDSO Drawing CG-10100.
Set of High Angle Perspex wedge attachment. ( As per attached Specifications ) 1. High Angle Perspex wedge attachment of 45 degree - 02 Nos 2. High Angle Perspex wedge attachment of 60 degree = 02 Nos
Suction and Irrigation tube with lateral holes, anti-reflex surface with two way stopcock 5 mm as per attached spec
Dead Weight Pressure Gauge Tester suitable for calibration and testing of air pressure gauges, provided with 1/2 inch BSP gauge connector, measuring range from 0.2 kgf/cm2 to 16 kgf/cm2 with resolution of 0.05 kgf/cm2 and accuracy of +/- 0.1% or better, complete with one set of MS phosphated black weights with storage box, set of 08 adaptors comprising (1/8, 1/4, 3/8,1/2) inch BSP and (1/8, 1/4, 3/8,1/2) inch NPT threads, one angle connection (1/2 inch male x 1/2 inch female BSP) suitable for back mounting gauges, tool kit consisting of four spanners, one Allen key, one screwdriver and one spirit level, minimum 1/2 litre oil, one set of spare seals, one instruction manual, and OEM test/calibration certificate traceable to NABL/NPL standards. Make- RAVIKA DW 12 or similar
Set of Contactors of Different Rating and Capacities, suitable for Vande Bharat.
Polyvastra Bed Sheet size 229X140 cms with longitudinal screen printing of NORTH WESTERN RAILWAY MM/YY in English and UTTAR PASCHIM RAILWAY MM/YY in Hindi alternately of size 30 cm X 1 cm to be printed in running length symmetrically as distance of 45 cms from both ends. Screen printing shall be in light blue colour. Other parameters as per specification attached Annexure-A
Full gloss polyurethane enamel two pack exterior finishing to RDSO M&C/PCN/100/2018 Amndt. No. 1B as an additional requirement, color Silver Grey-to RAL-7001.
Hexagonal head bolt size M8x35 mm fully threaded with double nut, double spring washer & double flat washer confirming to IS:1364(pt.-2)/2023.
Split pin 8 x 45 mm to IS:549/2005 Rev-3 , St-34, coating as per MDTS-057.
Chute complete for wash basin outlet pipe to RCF drg. no. CC63481 Alt. b.
Digital capacitance meter, as per attached specification along with valid calibration test certificate from NABL accredited/GOVT approved labs.
Single Acting Solid Hydraulic Cylinder Ram Jack with Hand Pump ,Capacity- 05 TON as per attached specification.
External Circlip Plier, Straight Nose Capacity: 19-60mm, Length: 195mm. Make: Taparia/Stanley/Eastman/Venus/ Gadore or similar Firms offered.
PVC Insulated Copper Cable Single Core and Multi Core Circular Sheathed with Rigid Conductor (V2) ISI Marked To IS 694 (Q2)
Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2)
SET OF STAINLESS STEEL HEX HEAD BOLT FULL THREADED OF SIZE M10 X 20 MM.LONG
Polyurethane Surfacer (Two Pack) as per Chapter-IV of RDSO Spec. No. M&C/PCN/100/2018 with additional requirement as per RDSO Amdt. No. 1B (Rev. 2.0)
Liner Size - 100X80X4 mm thick drg no. WD - 93023 -S-1, Alt -nil item no..2 .
Supply installation, fitting and commissioning of 13 pin UIC Test Bench module
GI pipe nipples size 1" x 24" both side thread to IS:1879/2010, Amndt.-5
"1 kVAR METALLIZED POLYPROPYLENE GAS-FILLED, WAVY CUT, THREE-PHASE, SELF-HEALING TYPE CAPACITORS. THE CAPACITOR SHOULD HAVE DISCHARGE RESISTOR AND OVER-PRESSURE DISCONNECTION. CONFORMING TO RDSO MODIFICATION SHEET NO. RDSO/PE/MS/AC/0054-2011 (REV-1), AND IS:13340 WITH ISI MARK, AND HAVING PROPERTIES AS DEFINED IN TABLE-1 OF RDSO MODIFICATION SHEET NO. RDSO/PE/MS/AC/0054-2011(REV-1). SUITABLE FOR USE IN CAPACITOR BANKS OF LHB AC COACHES AND POWER CARS. THE FIRM SHALL SUBMIT COMPLETE TYPE TEST REPORT FOR CAPACITY OF 1 KVAR OR HIGHER AS PER IS 13340 ALONG WITH LATEST ISI CERTIFICATION WITH PRIOR APPROVAL OF RDSO. ACCEPTED MAKE: M/S EPCOS, M/S VISHAY OR ANY OTHER MAKE WITH PRIPOR APPROVAL OF RDSO .
Anti-D Human immunoglobulin Serum 150mcg. Inj. 2ml. Vial