North Western Railway Tender Results

Implant for ACL reconstruction set

Snap Arrow type Retainer 24 mm for Snap Rivet

DOUBLE HOLE LUG TERMINAL FOR TM OUTGOING CABLE

FOOT OPERATED HORN VALVE COMPLETE TO M/s. ESCORTS DRG.NO.3EP 6042 OR M/s. SMC PART NO.VM 220 or similar suitable for 1400 HP DEMU DPC

Washer M.S. black plain punched bore 26

Lower spring beam arrangement for standard equalizing stay for BG main line non AC coaches

Silicon sealant Transparent

Exterior Panel WC side Assembly Euro for Economy Coaches

Brake Hose for APM (ERV) as per SONA BLW drg no -3EB9763 or Equivalent.

TIME DELAY RELAY 110 V DC

Ladder assembly complete six step for BOXNR wagon

MCB OF 16A , SINGLE POLE, C-CURVE , RATED VOLTAGE 230V AC, BREAKING CAPACITY 10KA, SUITABLE FOR USE IN MOBILE/ LAPTOP CHARGING CIRCUIT OF SWITCH BOARD CABINET OF LHB AC COACHES AND CONFORMING TO RDSO SPECIFICATION NO. RDSO/PE/SPEC/AC/0184-2015 (REV-1). ACCEPTED MAKE & MODEL NO: - M/s Legrand make model no. 408592, M/s Siemens make model no. 5SL41167RC, M/s ABB make model no. SB201M-C16, M/s L&T make model no. BB10160C, M/s Schneider make model no. A9N1P16C, M/s C&S make model no. CSMBS1C16 or any other RDSO approved make.

67010 - SALT PELLETS PK OF 25 KG

500A IV coupler cable support and safety

ALARM CHAIN PULL INDICATION LIGHT FITTING, CONFORMING TO RDSO DRAWING NO. SKEL-3911(REVISION-1) ALTERATION-'C' WITH THE FOLLOWING REQUIREMENTS:- (i)THE OUTSIDE OF LIGHT FITTING SHOULD BE FINISHED IN SYNTHETIC ENAMEL RED PAINT TO IS 2932. (ii) THE LENS SHALL BE CLEAR AND COLOURLESS [AS PER ITEM -4 OF RDSO DRAWING NO SKEL-3911. (iii) THE HOLDER SHALL BE SCREW TYPE E-27. (iv) THE CABLE ENTRY HOLE SHALL BE 20 MM DIA INSTEAD OF 11 MM DIA INDICATED IN THE DRAWING (v) HOLES SHALL BE PROVIDED TO SUIT 20 MM DIA GROMMETS.

POH KIT FOR KEO TYPE DISTRIBUTER VALVE FOR WAGON CONSISTING OF 50 ITEMS,

HEATING ELEMENT (BURNER) RING TYPE

HQ_Med_(PH NO.9034) AMITRIPTYLINE 10 MG TAB/CAP

1. Velcro Type Aluminium Oxide Sanding Disc with Holes for Vacuum Extraction, Grit 40, size 150 mm (6) X 6 holes. Specification IS: 715:2002, Rev.4, Amendment No.1 October 2004. 2. Velcro Type Aluminium Oxide Sanding Disc with Holes for Vacuum Extraction, Grit 60, size 150 mm (6) X 6 holes. Specification IS: 715:2002, Rev.4, Amendment No.1 October 2004.

Vent Assembly

13 PIN UIC COUPLER PLUG ASSEMBLY

Paint enamel synthetic brilliant green exterior finishing type -1 to ISC-221, of IS:5/2007 to IS:8662-2024 , with additional requirement stipulated in ICF specification ICF/MD/Spec.-045, status 02, Rev. 03. Packing in 20 Ltrs. new non- returnable M.S. drums to IS:2552/89 or latest Gr. B-II.

Stiffener plate of front carrier plate

13321 - ABSORBABLE SURGICAL SUTURE POLYGLACTIN BRAIDED COATED 90 CM,NO.2-0, NEEDLED 30 MM 1/2 CIRCLE ROUND BODY NW 2317 (BOX OF 12 FOILS)

41177 - STA COAG CONTROL N+P FOR D PT&APTT. One pack contains 24 vials of 1ML each control (12 VIALS OF NORMAL CONTROL AND 12 VIALS OF PATHOLOGICAL CONTROL) for STA Satellite MAX STAGO ANALYSER .

TAB. LABETALOL 100 MG

12527 - LIGATION CLIPS SMALL - LT 100 PK OF 36.LIGA CLIPS MADE OF TITANIUM OR SUITABLE MATERIAL, WITH APPLICATOR TO BE USED FOR OPEN SURGERIES,SMALL SIZE.

Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Outstation

All in One PC (V2) (Q2), A4 and Legal Size Multifunction Printer (MFP) (Q2), Line Interactive UPS with AVR (V2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Power Generator - DG Set (up to 900 KVA) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Past Performance, Certificate (Requested in ATC), OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Bid Number : GEM/2026/B/7138703 Dated : 22-01-2026 Bid Document 1/10 Number of Auto Extension count 1 Past Performance 20 % Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Pre Dispatch Name of the Empanelled Inspection Agency/Authority RITES Estimated Bid Value 4370012 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 87400 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 26 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this 2/10 Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Sr DFM/NWR/JU North Western Railway, Jodhpur (Sr Dfm/nwr/ju)

Custom Bid for Services - Providing the Masonry services with contractors skilled labour for day to day maintenance of staff quarters and service building etc complete as per the direction of ADEN HQ III JP, Custom Bid for Services - Providing the carpentry service with contractors skilled labour for day to day maintenance of doors boards safety boards etc by tightening adjustment of door window fittings adjustment replacement of cylindrical door lock .., Custom Bid for Services - Providing the Plumbing service with contractors skilled labour for day to day maintenance as per the direction of ADEN HQ III JP, Custom Bid for Services - Providing the valve man service with contractors skilled labour for day to day as per the direction of ADEN HQ III JP SSE W S I JP with all labour tools plants and materials complete, Custom Bid for Services - Providing the Watchman service with contractors skilled labour for day to day as per the direction of ADEN HQ III JP SSE W S I JP with all labour tools plants and materials complete, Custom Bid for Services - Providing the Cleaner/Sweeper service with contractors labour for day to day as per the direction of of ADEN HQ III JP SSE W S I JP with all labour tools plants and materials complete, Custom Bid for Services - Providing the gardening service with contractors skilled labour for day to day maintenance lawn gardens etc complete as per the direction of of ADEN HQ III JP SSE W S I JP with all labour tools plants and materials comple..

Zone No. 2B :- Zonal works for service buildings at Lalgarh under ADEN/HQ/NWR/Bikaner

Zone No. 8(B)- Zonal works for Staff Qtrs over SSA Sub Division under ADEN/SSA/N.W.Rly.

Zone No. 6(A) - Zonal works for Service Building over Hanumangarh Sub Division under ADEN/Hanumangarh-I

Zone No. 8(A)- Zonal works for Service Building over SSA Sub Division under ADEN/SSA/N.W.Rly.

Zone No. 1(B)- Zonal works for Staff quarters & Bunglows at Bikaner under ADEN/HQ/NWR/Bikaner

Zone No.5 (A)-Zonal works for Service Buildings over ADEN/Suratgarh Sub-Division (For 2026-27 & 2027-28).

Zone No.4 B(II)- Zonal Works for Staff quarters over ADEN/Line/Bikaner Sub Divisionfor LGH(Ex.)-PLC(Ex.) Section (For 2026-27 & 2027-28).

Zone No. 6(B) - Zonal works for Quarters over Hanumangarh Sub Division under ADEN/Hanumangarh-I

Zone No. 3 :- Zonal works for Staff Quarters & Bunglows at Lalgarh under ADEN/HQ/NWR/Bikaner

Zone No. 1(C)- Zonal works for Horticulture works in Staff Quarters, Station Buildings & Bunglows at Bikaner & Lalgarh under ADEN/HQ/Bikaner

Zone No. 7(B) - Zonal works for Quarters over Hanumangarh Sub Division under ADEN/Hanumangarh-II

Zone No.4A(II)- Zonal Works for Service Building over ADEN/Line/Bikaner Sub- Division for LGH (Ex.)-PLC (Ex.) Section (For 2026-27 & 2027-28).

Zone No. 5(B) Zonal work for Staff Quarters over ADEN/Suratgarh Sub-Division (For 2026-27 & 2027-28).

Zone No.4 A(I) -Zonal works for Service Building over ADEN/Line/Bikaner Sub- Division for NPS(Ex.)-NTZ(Ex.) Section (For 2026-27 & 2027-28).

Zone No. 9(A)- Zonal works for Service Building over BNW Sub Division under ADEN/BNW/N.W.Rly.

Zone No. 7(A) - Zonal works for Service building over Hanumangarh Sub Division under ADEN/Hanumangarh-II

Zone No.1(A)- Zonal works for Service Building at Bikaner under ADEN/HQ/NWR/Bikaner

Zone No. 2A :- Zonal works for work shop & general store at Lalgarh under ADEN/HQ/NWR/Bikaner

Zone No. 11(A) - Zonal works for Service Building over Ratangarh Sub Division under ADEN/Ratangarh