Loading
Loading…
Loading…
14 results • Latest
Dismantling of condemned vehicle
Dismantling of Condemned Vehicles at Traffic Section.
Supply, fabrication, inspection, and fastening of customized high tension (HT) MS nut-bolt assemblies for Tetra Drum Containers at AWTSF, Tarapur
Procurement of raw material , verification & identification of material, fabrication, machining ,threading ,welding , inspection and supply of HT MS customised special purpose nut bolt as per technical specification.
Fabrication, testing, inspection, and installation of customized DCEM clutches (05 Nos.), brake motor (01 No.), and hoist brake (01 No.) for EOT cranes at NRB, Tarapur
Supply, fabrication and inspection of DCEM Clutch (05nos) of EOT crane at Storage vault & Process Block.
Replacement of conventional tube light in public buildings in BARC Staff Colony, Tarapur
Lighting Fixtures : Supply, Installation , testing, commissioning and One year Garantee of 30 Watt LED surface mounting LED flat panel fitting 2' x 2' along with driver unit. equivalent to model RC 380B LED 36S Light source engine type - LED Luminous Flux - 3600 lm, CRI > 80, Housing material - Steel with polycarbonate optical cover material. PF - 0.9 Input Voltage - 220 to 240 V Line Frequency - 50 Hz Power Consumption - 30 W Protection class IEC - Safety class I Surge Protection level until 4kV differential mode and 4kV common mode Make - Philips/ Crompton/ Havells
Contract for replacement of potentially active HEPA filters, prefilters and fresh air filters at FF, NRB, BARC, Tarapur
Installation of HEPA Filters Removal of potentially active HEPA Filters from filter frame in radiation field in the range of 15-20µR/hr, Packing of filters in box, installation of new HEPA filters to the level required for obtaining filter bank efficiency. Shifting of used HEPA filters from Lab bldg filter house at terrace to shipping container as per annexure-I Size :- 610x610x305mm
Fabrication, Supply and installation of a puff wall panel partition at WIP AHU Room, BARC Tarapur.
Fabrication, supply and installation of puff wall panel partition of size (L: 9.5m, W: 2.2m, H: 2.2m) at WIP AHU room with a double-skin prefabricated wall panel system made of pre-painted outer skin 0.6mm thick GI sheet coating (50 microns) with plastic guard on both sides, and puff as infill with a density of 40 kg/m³ and a thickness of 50mm. The wall panel also includes double flush-type double-skin door of size: 1500mm (W) x 2100mm (H) 50mm thick frame and a single flush-type double-skin door of size 900mm (W) x 2100mm (H) 50mm thick frame. The flush-type double-skin door should have 0.8mm thick powder-coated sheets on both sides and a 50mm thick puff view panel of size 1m x 1m with 5mm toughened glass as per site requirements and technical specifications.