Organization Name Tender Results

plastic moulded chair Experience with Gov. Required 2 Year (s) Plastic Moulded Chair ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl FILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING 1/4 Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) PLASTIC, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS Without arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 425 * Seat Depth in mm (+/- 5 mm) 470 * Chair Height in mm (+/- 10 mm) 805 * Chair Dimensions Not Conforming To IS 3663 Latest * Weight of Chair (IN Grams) 250 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 1- Cycle Number 2 is more than 50 % Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand NO * MISC Colour Ash Gray, Steel Gray, Dark Gray, Green, Olive Green, Brown, Dark Brown, White, Off White, Blue, RED, YELLOW, PINK, UMBER GOLD, Black * Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lalita Jain 325205, Govt. Girls College Baran Baran Rajasthan 200 15

Notebook Computers-laptop

chairs-office

Printer

Desktops

Electronic Lectern

Wooden Bed Box Type Single or Double Average Turn Over of Last 3 Years 9 Lakh (s) Experience with Gov. Required 3 Year (s) Wooden Bed Box Type Single Or Double ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Bed Single Bed Single Bed Material of Bed Frame Flat single layer MDF board of grade SBG II of IS 12406/Latest teak wood, Carved teak wood, Other Wood, Flat single layer MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Headrest provided true - Legrest provided true - Opening of Storage Box Opening From Top - Number of Openings (Nos) 2 - Hydraulic System provided for Opening true true, false Top Pannel have YES - 1/4 Supports from all the four sides Leg Details Fibre shoe - Number of Supports under Bottom Pannel of storage box (Nos) 4 - MATERIAL Material of Matresses Pannel MDF board conforming to IS:12406(Grade SBG I) plywood conforming to is 303, MDF board conforming to IS:12406(Grade SBG I), Commercial Block Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Other wood Material of Bottom Pannel of Storage Box MDF Board Conforming To IS:12406(Grade SBG I) As per GeM Catalogue. Material of Front, Back and side Pannels MDF Board Conforming To IS:12406(Grade SBG I) plywood conforming to is 303, Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest mdf board conforming to is 12406 grade sbg i As per GeM Catalogue. Material of Legrest mdf board conforming to is 12406 grade sbg i As per GeM Catalogue. 2/4 DIMENSIONS Matress Fixing Length ±10 (mm) 1830 - Matress Fixing Width ±10 (mm) 915 915, 1525, 1830, 1980, 2134, 1200 Matress Pannel Height ±5 (mm) 40 - Depth of Storage Box in mm (±10 mm) 350 - Thickness of Matresses Pannel ± 1(mm) 19 - Thickness of Bottom Pannel of Storage Box ±1 (mm) 19 - Thickness of Front, Back and Side Panels ±2 (mm) 50 - Thickness of material of Headrest ±2 (mm) 50 18, 25, 36, 38, 50, 62, N.A Overall Height of Headrest ±5 (mm) 900 - Length of Headrest ±10 (mm) 915 - Thickness of material of Legrest ±2 (mm) 50 - Overall Height of Legrest ±5 (mm) 550 450, 500, 550, N.A Overall Length of Legrest ±10 (mm) 915 915, 1833, NA, 1200 Size OF SUPPORT for Top Pannel ±2 (mmxmm) 50 x 50 - Size of Supports on under Bottom Pannel of storage box ±2 (mmxmm) 50X50 - COLOUR & FINISHING Finish Laminated Polished, Painted, Laminated, Teak laminate/ply with polish, Teak laminate/ply with melamine finish Colour of Paint As per buyer's choice - Colour of Lamination NA - All Visible Wood Parts to be Polished YES - WARANTEE WARANTEE PERIOD IN NUMBER OF 5 1, 2, 3, 4, 5 3/4 YEARS * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manish Agrawal 302020, B-2, By-Pass, Shipra Path Agarwal Farm, Mansarovar, Jaipur-302020. 20 15

sofas Experience with Gov. Required 2 Year (s) Sofas ( 6 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Total Number of Seats in the Sofa Set (Nos) 3 * Type of Sofa and Backrest Seat and Backrest are permanently fixed with the frame Structure * Number of Single Seater Units (Nos) NO SINGLE SEATER UNIT 1, 2, 3, 4, 5, NO SINGLE SEATER UNIT Number of Two Seater Units (Nos) NO TWO SEATER UNIT 1, NO TWO SEATER UNIT Number of Three Seater Units (Nos) 1 1, NO THREE SEATER UNIT Number of Four Seater Units (Nos) NO FOUR SEATER UNITS 1, NO FOUR SEATER UNITS Frame Covering Fully Upholstered Fully Upholstered, Partially Upholstered, Fully Exposed Sofa Set is Foldable to use as bed false * 1/4 Backrest Cushion Material foam * Density of Cushion of Backrest Material (Kg/Cubic M) 40 * Covering Material for Seat and Backrest rexin fabric, rexin, leather fabric, Leatherite MATERIAL Frame Structure Material and size (±1 mm) MILD STEEL STRUCTURE 18 mm teak plywood, 19 mm commercial board, teak wood of minimum 25 mm thickness, Carved Teak wood of minimum 25 mm thickness, MILD STEEL STRUCTURE, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, any other wood of minimum 25 mm thickness Seat Cusion Material foam foam, rubber Density of Cushion of Seat Material ±3 (Kg/Cubic M) 40 * Type of Spring in the Base/Seating No Spring in the Base eight way hand tied spring, sinous spring, web suspension, checking couch spring, No Spring in the Base, Zig zag DIMENSION Length of Single Seater Units in mm (±5 mm) N.A 400, 508, 570, 660, 700, 750, 800, 850, N.A Length of Two Seater Units in mm (±10 mm) N.A 800, 1000, 1100, 1220, 1370, 1400, 1500, 1600, 1750, N.A Length of Three Seater Units in mm (±10 mm) 1200 * 2/4 Length of Four Seater Units in mm (±10 mm) N.A * Depth of Sofa Units in mm (±10 mm) 400 * Sofa Height (Without Back Cushion) ±5 (mm) 400 * Sofa Height (With Back Cushion) ±5 mm 600 * Arm Width ±5 (mm) 100 * Arm Height ±5 (mm) 400 * Seat Height (With Seat Cushion) ±5 (mm) 400 * Sofa Leg Height ±2(mm) 25 * Sofa Leg Width Diameter ±2 (mm) 25 * Seat Cushion Length ±5 (mm) 710 * Seat Cushion Width ±5 (mm) 510 * Seat Cusion Thickness ±5 (mm) 125 * Backrest Cushion Length ±5 (mm) 740 * Backrest Cushion Width ±5 (mm) 508 * Backrest Cushion Thickness ±3 (mm) 100 * Thickness of Foam in arms ±2 (mm) 75 * Thickness of Foam in back ±2 (mm) 76 * Thickness of Foam in front ±2 (mm) 76 * Thickness of Foam in sides ±2 (mm) 76 * COLOUR & FINISH Colour of Polish on exposed Wood frame dark brown * Colour of Covering Material brown * WARRANTY WARRANTY PERIOD IN NUMBER OF YEARS 1 1, 5 * Bold specifications are the golden parameters. 3/4 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ganesh Kumar 325205, Govt. Girls College Baran Baran Rajasthan 6 15

Line Intractive UPS with AVR Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 2 Year (s) Line Intractive UPS With AVR ( 24 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 60% >/= 60% Warranty for the battery from the date of delivery 1 year 1 year Warranty for Line Interactive UPS 1 Year 1 Year Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - 1/4 AC out put for printer (not through inverter) Yes Yes Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - 2/4 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gumli Ngomdir 791112, Room No.107, Digital Cell, Block No.1, First Floor A.P.Civil Secretariat, Itanagar 24 15

Veterinary Vitamin and Mineral Mixture Veterinary Vitamin And Mineral Mixture ( 2150 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERAL Type of Mineral Mixture Chelated Vitamins & Minerals Type 1 (Mineral Mixture containing salt) as per IS 1664:2002 (Latest Revision), Type 2 (Mineral Mixture without salt) as per IS 1664:2002 (Latest Revision), Chelated Vitamins & Minerals Conformity to Indian Standard IS 1664:2002 (Latest Revision) Yes * Product is ISI Marked false true, false BIS Lisence No (CM/L No) na * Type of Animal for Which Material Suitable Cow * The material shall be free flowing powder and free from adulterants, insect, visiible fungus Yes * 1/5 infestation and undesirable odour The material shall be free from spores of Bacillus anthracis Clostridium sp when tested by the method described In 4 5 and 6 of IS 7874 ( Part 3 ) Yes * The Type 1 material shall pass more than 70% by mass through 200 micron IS sieve (IS:460 -Part 1) NA * The Type 2 material shall pass more than 90% by mass through 200 micron IS sieve (IS:460 -Part 1) NA * Shelf life (in months) from the Date of Manufacturing 24 12, 24, 36, 48, 60 Feeding Instructions 100gm/day * INGREDIENTS Composition Requirements of the Mineral Mixture As per Clause 6.3 of BIS Specification given in IS 1664:2002 (Latest Revision) * Calcium Carbonate - true, false Ground Limestone (with low magnesium content) - true, false Calcite Powder - true, false Dolomite Limestone - true, false Oyster Shell Grit - true, false Dicalcium Phosphate (conforming to IS 5470) - true, false Magnesium Carbonate - true, false Magnesium Oxide (calcined magnesite) - true, false Manganous Sulphate (dried/monohydrate) - true, false Zinc Carbonate - true, false Zinc Chloride - true, false Zinc Sulphate (dried/monohydrate) - true, false 2/5 Potassium iodide (stabilized) - true, false sodium iodide - true, false Potassium iodate - true, false Calcium iodate - true, false Cupric Sulphate - true, false Cupric Chloride - true, false Cobalt Sulphate - true, false Cobalt Chloride - true, false Common Salt (IS 920) - true, false Sodium Thiosulphate (anhydrous) - true, false Ferrous Sulphate (dried/monohydrate) - true, false All ingredients used shall be suitable for Cattle's consumption and shall contain no substances harmful to Cattle - Animal origin material shall not be used Yes * PACKING & MARKING Air tight moisture proof packing, sound, clean and free from casual agents of infectious diseases & parasites Yes * Pack Size (grams) 1000 200, 500, 1000, 2000, 5000, 10000 Type of Packing Container Bag Bag, Tin, Carton, Box, Drum Material of Packing Container pouch * Marking on the Container As per Clause 7.2 of IS 1664:2002 (Latest Revision) * CERTIFICATIONS Original Manufacturer with Valid Manufacturing License/Registration Certificate Yes * License issuing authority ICAR NDRI KARNAL HARYANA * Manufacturing License No/Registration Certificate No UP50A0002743 * 3/5 Manufacturing License Date/Registration Certificate Date 29 mar 2017 * Manufacturer has not been Black Listed by any Government agency/Institution of local self Government/Public Sector in India Yes * Availability of the Product in market at least for past 3 years from commencement of its manufacturing Yes * Availability of Good Performance Certificate no * The Firm is registered with NSIC/SSI true * Certification for Manufacturing Premises ISO, ISI, MSME, NDRI * Submission of Analysis/Test Report for each batch from FDA approved laboratory/Govt Lab/Govt approved lab/Agency conforming all the declared parameters of the specifications to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajiv Kumar Mishra 495334, Deputy Director Veterinary Services Mungeli 2150 30

SPARE/Add on Battery Packs for Transreceiver- Handheld Average Turn Over of Last 3 Years 80 Lakh (s) Experience with Gov. Required 2 Year (s) SPARE/Add On Battery Packs For Transreceiver-Handheld ( 4000 ) Technical Specifications Specification Specification Name Values Allowed Values SPARE/Add on Battery Packs for Transreceiver- Handheld Battery Chemistry NiMh NiMh, Li-ion, Li- polymer Rated Capacity ( mAh ) 2400 As per GeM Catalogue. "Nominal terminal Voltage (hint: 7- 2 V for NiMh batteries and 7-4 V for Li-ion and Li-polymer batteries) 7.2 7.2, 7.4 OEM part number HNN9009ASP03 - Governing Specification MHA QR OEM Specification, MHA QR Governing Specification (MHA QR) has been seen and understood Yes Yes, NA for OEM Specification NAME of batery manufacturer and Battery Make Sanmina- Sci Systems (Malaysia) SDN BHD. MAKE : Motorola - Compatible MAKE of Motorola As per GeM Catalogue. 1/3 Transreceivers Compatible Model of Transreceivers supported GP338 As per GeM Catalogue. BIS certification to IS: 16046 (latest) under Compulsory Registration Scheme (CRS) Yes - BIS REGISTRATION NUMBER R-41041815 - Additional Features, if any NA - Warranty 12 12, 18 CERTIFICATION Availability of Test Reports from Central Govt/NABL approved/ILAC accredited Lab to prove Conformity to the Governing specification true true, false If Yes, Test Report to be furnished to the Buyer on demand Yes - Test Report No and Date R-41041815, Dated -29/11/2016 - Name of the Lab and Address BIS - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunita Sharma 226006, UP POLICE TELECOM HQRS, MAHANAGAR 4000 30

Desktops

Microscopes - Pathological and Research Microscopes - Pathological And Research ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type pathological binocular non hinged type with built in light and with light intensity regulator pathological monocular hinged type without built in light and without light intensity regulator, pathological monocular non hinged type with built in light and with light intensity regulator, pathological binocular non hinged type with built in light and with light intensity regulator, research binocular non hinged type with built in light and with light intensity regulator, Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator Conformity to Indian Standard Pathological IS:4381 latest - ISI MARKED false true, false Eye piece Type Compensating Huygenian, Compensating Binocular Eye pieces yes - 1/3 Confirming to the requirements of IS: 8275/1976 ( latest) Eye Piece with magnification Set of Two For Binocular 10x monocular 5 x, monocular 10 x, monocular 15 x, set of two for binocular 5 x, Set of Two For Binocular 10x Objective Type achromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 100X 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 1.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination halogen - GENERIC Plano Concave mirror attachment NA - Stage Ractangular - Size of Stage 120 X 132 mm - Coarse and Fine Movement of stage yes - Co-axial focussing true - Micrometer Arrangement false - ACCESSORIES Extra eyepieces (inclusive in the scope of supply) NA 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) No - WARRANTY Warranty 1 1, 2, 3, 4, 5 Higher is better CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Manwinder Singh 143005, G T ROAD 4 15

sutures

Desktops

propeller type ac ventilating fan-exhaust Propeller Type Ac Ventilating Fan-exhaust ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SIZE-TYPE- PERFORMANCE Sweep Size (mm) 200 200, 380, 450, 600, 900, 1200, 1500 No. of Poles 4 2, 4, 6, 8, 10, 12, 16 Type of Fan Capacitor Type Capacitor Type, Non- Capacitor Type Insulation Material Class Class A Class A, Class B, Class E Minimum Air delivery (m3/h) As per IS: 2312 (latest) * Maximum watt Input (Watt) As per IS: 2312 (latest) * Power factor As per IS: 2312 (latest) * CERTIFICATION Conformity to Indian Standrad IS: 2312 (latest) * ISI Marked Yes * Availability of Test Report fro NABL/ILAC accredited or Central Govt Lab to prove Yes * 1/3 products specification Test Report number & Date 04/08/2017 * Name & Address of Laboratory central power research institute * GENERIC Speed Regulators Not-Available * Colour metallic grey * Motor Enclosure Fan motor is totally enclosed type * Louver Shutter Available * Standard installation accessories such as Frame, Legs Set, Rubber Clamps & Other Hardware - inclusive in the scope of supply Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravi Kumar Dadheech 306401, College Rd, Indira Colony Vistar, Pali, Rajasthan 306401 15 15

LED Lamps- bulb ( PAC Only ), LED Lamps- bulb ( PAC Only ) LED Lamps- Bulb ( 100 ) ( Under PAC ) Make crompton Model crompton(7watt) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 7Watt/700 lumens 7Watt/700 lumens Colour Temperature (K) 2700 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 3 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * 1/5 Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) <100 Volt and >300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) LED CHIP * LED Make CROMPTON * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. 7845 * LED life Certificate Test Report Date 02/04/2018 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number 45125 * LED Lamp Life Certificate date 02/04/2018 * Name of Lab where test conducted AMIT TEST LAB * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. 52369 * Test Report Date 02/04/2018 * 2/5 Name of lab where test conducted AMIT TEST LAB * Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 100 15 LED Lamps- Bulb ( 50 ) ( Under PAC ) Make crompton Model 9wcrompton Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 9Watt/900 lumens 9Watt/900 lumens Colour Temperature (K) 5700 2700, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * 3/5 Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) LM80 * LED Make OSRAM * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. 342122 * LED life Certificate Test Report Date 21-1-18 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number 342122 * LED Lamp Life Certificate date 21-1-18 * Name of Lab where test conducted NABL GURGAON * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * Test certificate No. 213244 * Test Report Date 21-1-18 * Name of lab where test conducted NABL GURGAON * Complusory Registration(CRS) of Yes * 4/5 BIS for safety as per IS 16102-I * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 50 15

Air Conditioner Air Conditioner ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Non- Inverter (Fixed Speed) Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.5 Ton/4500 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true, false Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 5 metre * Packing LIst Copper Pipe, Remote, Indoor and Outdoor * Any other Features Daikin FTL comes with Eco Friendly Gas R-32 * CONFORMITY BEE Star Rating 3 3 1/3 CERTIFICATION Conformity to Indian Standard IS 1391 latest * WARRANTY Warranty on Machine 1 1, 2, 3, 4, 5 Warranty on Compressor 5 5, 6, 7, 8, 9, 10 (or higher) INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Minakshi Jain 303702, MORIJA ROAD, BEHIND POWER HOUSE, CHOMU 8 15

Multifunction Machines

Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. * Type Gas Cartridge Type Stored Pressure, Gas Cartridge Type Extinguishing Media Powder Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium N2 Based (Stored Pressure) CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA * Powder Based Extinguishing Media ABC * Clean Agents Based Extinguishing Media NA * Foam Based Fire Extinguisher Capacity(Ltrs) 4 2, 4, 6, 9, NA 1/4 Powder Based Fire Extinguisher Capacity (Kg) 6 1, 2, NA Carbon Dioxide Based Fire Extinguisher Capacity (Kg) NA 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 6 Any applicable numeric value Rechargebale true * Color Coding Red * Fire Extinguisher Suitable for Class -A Fire true * Fire Extinguisher Suitable for Class -B Fire true * Fire Extinguisher Suitable for Class -C Fire true * Fire Extinguisher Suitable for Class -D Fire false * Fire Extinguisher Suitable for electrical Fire true * Performance Operating Temperature (° C) -30° C to + 55° C * Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar * Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA * Discharge Range for Extinguisher (Meters) >=2 for Class-A * Effective Discharge Time for Fire Extinguisher, Min 15 Any applicable text(s) 2/4 (Seconds) Fire Rating for Class -A Fire Extinguisher 6A * Fire Rating for Class -B Fire Extinguisher 55B * Certification BIS Marking Yes * CM/L No.* with Validity Period - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravi Kumar Dadheech 306401, College Rd, Indira Colony Vistar, Pali, Rajasthan 306401 20 15

Online UPS 5 KVA for Critical Infrastructures Online UPS 5 KVA For Critical Infrastructures ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Online UPS should support for critical infrastructures such as Data Centres, Network operating centres, Security operation centres, State and District centres, Command and Control centre etc., across the Country to provide impetus to the e- Governnance services e.g.Public food distribution, e Way bill, Counseling, e-Office, IVFRT etc., services under Digital India Programme Yes - On Line UPS Capacity/Battery back up time at full load/Minimum VAH 5 KVA/60 Minutes/8193 VAH 5 KVA/60 Minutes/8193 VAH Inverter Technology PWM with IGBT, double conversion - Isolation transformer: Galvanic Isolation Yes - 1/7 through inbuilt transformer at UPS output side Output wave form Pure sine wave - Country of origin for Inverter India - Noise level (1 meter distance from UPS) </= 55 dB - UPS shall have cold start facility Yes - Type of cool Air cooled - Parallel load sharing redundant operation with all accessories Yes - Installation and commissioning Yes Yes, No INPUT Input AC Single Phase - In put Voltage Range 160 V to AC to 270 V AC - Input frequency range 50 Hz +/-6% Hz - Input power factor at full output load leading to unity with active power factor correction (APFC) >/=0.90 - Distortion (current) Less than 10% - UPS shall have DG set compatibility Yes - OUTPUT Out put voltage 230 V AC +/-1% Single Phase - Voltage regulation (Steady state) at No load to full load, 0.6 lag to Unity PF, During entire back up time, Complete input voltage range +/-1% - Frequency 50 Hz +/-0.5 % Hz - CONSTRUCTION Minimum thickness (in mm) of M.S.Sheet Enclosure for UPS duly powder coated 1.0 - UPS shall be free from workmanship defects, sharp edges, nicks, scratches, burst, etc. All fasteners shall be fixed properly. The Yes - 2/7 equipment shall be complete with all parts and all parts shall be functional UPS enclosure's degree of protection as per IS:13947 (Part 1)/1993 latest IP21 - UPS shall have switches for: Mains ON/OFF MCB, Battery ON/OFF MCB/Fuse, Inverter push button with reset Yes - Standard quality Out put terminals shall be provided for output connection Yes - UPS shall have static and manual by pass facility Yes - UPS shall be supplied with required rated power cable (Copper) 5 Meters - Total Harmonic Distrotion (THD) for 100% linear load < 3% - Total Harmonic Distrotion (THD) for 100% non-linear load < 5% - Operating temeprature 0 deg C to 40 deg C - Humidity Upto 95% non- condensing - Crest factor on full non- linear load Not less than 3:1 - Over all efficiency on rated full load of 0.8 PF and 230 Volt, 50 Hz AC output >/=80% - Inverter efficiency on rated full load of 0.8 PF and 230 Volt, 50 Hz AC output >/=85% - UPS shall withstand Over load capacity - 110% for 2 Minutes - UPS shall withstand Over load capacity - 125% for 30 seconds - 3/7 Load power factor 0.8 lagging to unity Yes - Transient response time (for 100% load change, output must remain within +/-4% and recovery) </-20 milli seconds - PROTECTION Short circuit protection Yes - Over load protection Yes - Over temperature protection Yes - In put low/high voltage control Yes - DC low/high voltage trip Yes - BATTERY Battery shall conforming to JISC:8702(Pt.I, II&III) latest Yes - Battery type SMF VRLA - Country of origin for Battery India - Battery recharge time (after complete discharge to 90% charge) and charge rating: Battery recharge time to 90% charge after 100% DoD 8 to 10 hours - Battery charger should be capable to charge battery on C10 rating Yes - VAH tolerance -1% of the defined capacity - Battery cutoff voltage during back up Not less than 10.5 V - More than two battery banks should not be used in parallel in any configuration Yes - Batteries shall supply with With rack With moveable trolley, With rack Meters and Indicators UPS shall have LCD meter to measure and monitor input votlage, output voltage, output current/load level in %, DC current/DC level in %, DC voltage, input Yes - 4/7 and output frequency UPS shall have indicators for Mains on, Load on battery, Inverter, Battery level, Load level, Inverter over load Yes - UPS shall have audible alaram for over temperature, mains failure, battery low, inverter overload Yes - Management port: Preferably SNMP based with management Software Yes Yes, No WARRANTY AND SERVICES Warranty for UPS (on site comprehensive warranty) (in years) 3 3, 4, 5 Warranty for battery (replacement warranty) (in years) 2 2, 3 After sales and complaint service Within 7 days - PAN India service support on 24 x 7 basis Yes - AMC support available after 5 year warranty Yes - Quarterly preventive maintenance available Yes - Manufacturer shall provide and support for instllation, commissioning, spares, technical support all over India Yes - Availability of spares in close proximity (Spares should be easily available close to the site) Yes - CERTIFICATIONS ISO Certification Yes - CE Certification and marking Yes Yes, No Damp Heat Test : in accordance with IS:9000(part 5/sec.2)1981 at Yes - 5/7 Temperature of 40 degree C, two cycles of (12+12) hours each 2007) Dry Heat Test : in accordance with IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) at 55 degree C for 16 hrs Yes - Cold Test : in accordance with IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) at -10 degree C for 4 hrs. Yes - Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab covering all technical requirements. Yes - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable as on date Yes - As per Meity (Government of India) guidelines storage battery shall have valid BIS CRS certifications as applicable as on date Yes - All the test reports and certificates shall furnish by the supplier to the buyer/consignee on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman Hanmanta Chalwadi 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 4 15 6/7

chairs-office

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 251 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 2700 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * LED Make surya * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy 100 * 1/4 (Lm/W) Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0, 25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date IS 10322(Part 5/Sec 1) dt 01/10/2017 * Certificare for Yes * 2/4 Luminaire photometric data as per LM79 Certificate No and Date of Luminaire photometric data as per LM 79 report 14LP874 dt 10/12/2017 * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kumar Sharma 160017, 30 BAYS BUILDING, 1st Floor, Sector 17 B, Chandigarh 251 15

All in one All In One ( 4 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) * Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description Intel HD * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 5400 * RAM Type of RAM DDR4 * RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability 16 8, 32, Not- 1/4 Upto (GB) Available Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 21.45 18-27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 4 * USB Port 3.0 (No.) 2 * VGA Port Not-Available * HDMI Port Not-Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * Power Maximum Wattage (Watts) 65 * 2/4 Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pradip pradip_maganlal 362520, Superintendent of Police Office, Fudam, Diu-362520 4 15

All in one Experience with Gov. Required 1 Year (s) All In One ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-6400T (2.2 GHz, 6 MB cache, 4 cores) As per GeM Catalogue. Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description na - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 500 500, 1000, 2000 Hard disk drive speed (RPM) 5400 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 16 8, 32, Not-Available 1/4 Ram speed (MHz) 2133 - Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 19.5 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 2 - VGA Port Available - HDMI Port Not-Available - Thunderbolt Port (No.) Not-Available - Display Port Not-Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 3.0 - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available BEE - ROHS Compliance Yes - Power Maximum Wattage (Watts) 3 - Power Efficiency (%) Minimum 80 - 2/4 Others Webcam HD - DVD R/W Available - Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Tukaram Sawant 416416, DISTRICT ANIMAL HUSBANDRY OFFICE ZILLHA PARISHAD, CENTRAL ADMINISTRATIVE BUILDING, SANGLI MIRAJ ROAD, PUSHPRAJ CHOUK, SANGLI 4 15

e cart for garbage Average Turn Over of Last 3 Years 70 Lakh (s) E Cart For Garbage ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of E Cart Fully Electric, Battery Operated Motor Driven for Carrying Bins Fully Electric, Battery Operated Motor Driven for Carrying Bins Model Number of E- Cart - * Colour of E Cart - * The E Cart Must Fabricated From Good Quality Steel properly Painted to avoid Rusting for more than 5 Years, YES YES Name and Grade of Steel from which E Cart Body Framed - * Kerb Weight of E- Cart (kg) 325 Any applicable numeric value Garbage Carrying Capacity (kg) 400 350-9999999 Run Distance (for a 80 50-9999999 1/6 Full Charge of Battery, to be tested with full load at maximum AIS-040 )) (km) Number of Bins 2 Any applicable numeric value Capacity of Individual Bins in litres (Ltrs) 450 Any applicable numeric value Type of Chassis for E cart - * Ground Clearance as per IS : 9435 (mm) 200 180-9999999 Wheel Base (mm) 2175 Any applicable numeric value Turning Radius (mm) 3000 Any applicable numeric value Power Transmission from Motor Shaft to Wheels Other Mechanical Mechanisms Direct Mounting, Chain, Sprocket Type, Other Mechanical Mechanisms Please Specify the Mechanical Mechanism otherwise Put NA - * Type of Battery as per AIS-048 Lead Acid, EV Grade, Tubular Deep Discharge Lead Acid, Tubular Deep Discharge Capacity of the Battery approved by ICAT/ARAI (Ah) 100 100-9999999 Battery Voltage, Nominal (Volts) 48V 48V, 60 V Maximum Overall Dimensions of the Battery ( L x Wx H ) (mm3) - * Nominal Filled Weight of the Battery (kg) 112 Any applicable numeric value Motor Controller ( Must Suitable for starting, accelerating, decelerating, driving, and stopping of E Cart - * Battery Charger 220/230 V Nominal Input Voltage, High Efficiency Type 220/230 V Nominal Input Voltage, High Efficiency Type Charging Current (A) 15 Any applicable numeric 2/6 value Type of Motor Brushless DC Motor Brushless DC Motor Motor Output Power, 48V/60V at Full Load (watt) 1050 850-2000 Overall Efficiency of the E Cart ( to be tested at Full Load with maximum speed as per Concerned AIS standards (%) 85 Any applicable numeric value Gradeability of E- cart, ( to be tested at full procedure as per AIS -003 Load (Degree) 80 75-9999999 Certification Vehicle Certification ICAT ARAI, VRDE, ICAT, OTHERS If Vehicle Certification from Others Agency, Name of the Agency otherwise put NA NA * Vehicle Certification Number and Date CALB0195 5/12/2016 * Constructional Seating Facility For Driver only For Driver only Length of E -cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 2.765 Any applicable numeric value Width of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 0.96 Any applicable numeric value Height of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 1.735 Any applicable numeric value Dimensions of the cabin Provided for Bins (mm x mm x mm) (mm3) 1275*900*820 * Size of Front Tyre (mm) - * Size of Rear Tyre - * 3/6 Brake Type (Front) - * Brake Type ( Rear ) - * Suspension System (Front) - * Suspension System ( Rear ) - * Reverse Gear Facility Yes Yes The Mounting of Batteries Yes Yes Vehicle lighting System Filament Type Filament Type, LCD Based, LED Based Instrument Panel Containing Speedometer and Battery Charging Indicator Yes Yes Glass Windshield with wiper motor as approved by ICAT/ARAI false true, false Battery Make as per AIS :048:2009 Okaya Okaya, Exide, ceil, Amaron, Others If others please specify the Name of Brand, Otherwise put NA (as per AIS048 2009) - * Equipped with Start and Stop Button, parking Lights, Back lights with Reverse Gear Facility Yes Yes Equipped with Fire Extinguisher true true, false Equipped with First Aid Box true true, false Yellow Color reflective tape on Front and Rear Side of the E Cart Yes Yes E Cart Integration, Yes Yes Performance Parameters Speed of the E- Rickshaw as per CMVR -2014 with latest amndmt (to be tested with Full Load ) (kmph) 25 20-25 Battery Warranty 1 1, 2, 3 4/6 No. Of Free Service 1 1, 3, 4, 5 Complaince of Centre of Gravity of E Cart as a Compulsory Norms for Safety Yes Yes Confirming to Applicable Environmental Test Yes Yes Noise level must be Low during Operation Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayank Sahu 494444, MUNICIPAL COUNCIL BIJAPUR DISTRICT - BIJAPUR 10 15

Public Address System

Multifunction Machines

Smart Phone

backhoes

Multifunction Machines

OEM Cartridge/Consumable, OEM Cartridge Consumable, OEM Cartridge/Consuma OEM Cartridge/Consumable ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Canon - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number CRG 331 C - Corresponding Part number/code 6271B003AA - Printer Model number/numbers for which Cartridge is suitable LBP7100cn, LBP7110cw, MF621cn, MF628cw - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. 1/5 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, PCMC main building, pune mumbai road pimpri 411018 20 30 OEM Cartridge/Consumable ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Canon - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Yellow - Ink/Toner/Drum Model number CRG 331 Y - Corresponding Part number/code 6269B003AA - Printer Model number/numbers for which Cartridge is suitable LBP7100cn, MF628cw - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, pune mumbai road pimpri 411018 20 30 OEM Cartridge/Consumable ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values 2/5 Specification Product Class OEM - Brand Canon - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number CRG 331 M - Corresponding Part number/code 6270B003AA - Printer Model number/numbers for which Cartridge is suitable LBP7100cn, pune mumbai road pimpri 411018 20 30 OEM Cartridge/Consumable ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Canon - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number CRG 331 B - Corresponding Part number/code 6272B003AA - Printer Model number/numbers for LBP7100cn, MF628cw - 3/5 which Cartridge is suitable Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1400 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, pune mumbai road pimpri 411018 20 30

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Canon - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number CRG 328 - Corresponding Part number/code 3500B003AA - Printer Model number/numbers for which Cartridge is suitable L170, MF4720w, MF4820 d, MF4750 - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, PCMC main building, pune mumbai road pimpri 411018 300 30

classroom chairs Experience with Gov. Required 2 Year (s) Classroom Chairs ( 80 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms Type of Seat and Backrest 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side * Depth of Seat in mm (+/- 10 mm) 400 * Height of Seat in mm (+/- 10 mm) 480 * Width of Seat in mm (+/- 10 mm) 400 * Overall Chair Height in mm (+/- 10 mm) 900 * 1/3 SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion * Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion * Material of Fabric of Seat Cover No Cusihion No Cover * BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion * Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion * Material of Fabric of Backrest Cover No ciushion no cover * Width of Backrest (mm) 400 * Height of Backrest (mm) 297 * SUPPORT/UNDER STRUCTURE Frame Material Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Under Storage provided below the Seat NO * Material of under storage NA * Length of Under Storage (mm) NA * Width of Under Storage (mm) NA * DEPTH of Under Storage (mm) NA * WRITING PAD DETAILS Writing Pad Material 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side * Writing Pad Size (Length X Width in mm) NA * MISC Colour of Fabric for Seat and Backrest No Fabric * 2/3 Finishing of Structure Stove enameled Paint * WARRANTY CERTIFICATION * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Krishna Kumar Katendra 491441, Government Polytechnic Rajnandgaon C.G. 80 15

Notebook Computers-laptop

Desktops

Notebook Computers-laptop

All in one All In One ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th, 8th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) * Chipset Chipset Intel H170 * Graphics Graphics type Dedicated/Discrete * Graphic Card Description NVIDIA® GeForce® 930MX (4 GB GDDR5 dedicated) * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 2000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 5400 * RAM Type of RAM DDR4 * RAM Size (GB) 16 4, 8, 16, 32 1/4 RAM Expandability Upto (GB) 32 8, 32, Not- Available Ram speed (MHz) 2133 * Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 27 18-27 Type of Display Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 2 * VGA Port Not-Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * Power Maximum Wattage 150 * 2/4 (Watts) Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Height Adjustable * On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sanjay Mohansing Rathod 444001, Collector Office Premises Akola 1 15

Notebook Computers-laptop

Desktops

Desktops

All in one Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 5 Year (s) All In One ( 9 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7400T (2.4 GHz, 6 MB Cache, 4 Cores) * Chipset Chipset Intel H170 * Graphics Graphics type Dedicated/Discrete * Graphic Card Description NVIDIA® GeForce® 930MX (2 GB GDDR5 dedicated) * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 5400 * 1/3 RAM Type of RAM DDR4 * RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 16 8, 32, Not- Available Ram speed (MHz) 2133 * Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 23.8 18-27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 2 * VGA Port Not-Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * 2/3 ROHS Compliance Yes * Power Maximum Wattage (Watts) 150 * Power Efficiency (%) Minimum 80 * Others Webcam Full HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahesh Kumar Vaishnav 342304, AGRICULTURE UNIVERSITY OPPOISTE MANDORE RAILWAY STATION JODHPUR 9 15

Chest Press - Outdoor Gym Equipments Chest Press - Outdoor Gym Equipments ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Chest Press Double Chest Press Single, Chest Press Double SIZE Length 1675 - Width 782 - Height 2160 - CAPACITY Maximum User Weight ( Kg ) 110 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Central Pipe 125 mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main PRE GALVANIZED MILD - 1/5 Central Pipe ( as per IS 1161 ) STEEL 114MM OD PIPE Handle Frame 40mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) 50MM OD GI PIPE - Seat Frame 40mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Seat Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Seat Frame Pipe ( as per IS 1161 ) PRE GALVANIZED MILD STEEL 114MM OD PIPE - Connecting Links 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) 32 MM OD GI PIPE - Foot Rest Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Pipe, Not applicable for pipe as per IS 1161 Designation of Foot Rest Pipe ( as per IS 1161 ) 50MM OD GI PIPE - MS Foundation Plate Thickness 12 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with 2/5 M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 125mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NO - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Seat and Back Rest 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Hand Grips Polyurethane - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base Fibre Reinforced Plastic - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather - 3/5 resistance COLOUR Colour As per buyer's requirements - Paint/Finish Poly Urethane Paint, UV Resistant - Paint Coating Thickness ( min ) 100 - OTHER REQUIREMENTS Ergonomic Design Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Not Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration AS PER OEM - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 5 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 5 15 4/5

Air Walker- Air Stroller- Outdoor Gym Equipment Air Walker- Air Stroller- Outdoor Gym Equipment ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Double Single, Double SIZE/DIMENSIONS Length 1177 - Width 600 - Height 1600 - CAPACITY Maximum User Weight ( Kg ) 100 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1161:2014, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Frame 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Frame Pipe, Class as per IS 1239 Medium Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Frame Pipe ( as per IS 1161 ) Heavy Quality - 1/4 leg movement frame 40mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe Leg Movement Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Leg movement frame Pipe ( as per IS 1161 ) Heavy Quality - Handle Frame 25mm Nominal bore G.I. pipe 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) Hint must be declared as per clause 3 of IS 1161 indicating nominal bore, wall thickness and grade ( not applicable for pipe as per IS 1239 ) Heavy Quality - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Foot Rest Aluminum casting material Fibre Reinforced Plastic, Aluminum casting material, C.I., LD PE, HDPE, Nylon MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 100mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Medium Medium, Not 2/4 Class as per IS 1239 applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) Heavy Quality - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly Stainless Steel - Closing Caps of open ends of the pipes, bearings, bushes and base Fibre Reinforced Plastic - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - Foot rest shall be antislip/antiskid Yes - Moving ( swinging ) Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - 3/4 CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 5 15

Shoulder Builder/Arm Wheel- Outdoor Gym Equipment Shoulder Builder/Arm Wheel- Outdoor Gym Equipment ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Two Wheel Two Wheel, Three Wheel DIMENSIONS Height of Main Central Pole from ground 1600 - Outside Diameter of first wheel 800 - Outside Diameter of second wheel 850 - Outside Diameter of third wheel 850 - Height of first wheel from ground 1300 - Height of second wheel from ground 1200 - Height of third wheel from ground 1200 - MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Central Pipe 150mm Nominal Bore 80mm Nominal Bore 1/5 construction G.I. Pipe G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 1161 ) NA - Ring ( Wheel ) 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Ring ( Wheel ) Pipe, Not applicable for pipe as per IS 1161 Designation of Ring ( Wheel ) Pipe ( as per IS 1161 ) NA - Pipe of Spokes of Wheel 20mm Nominal bore G.I. pipe 15mm Nominal bore G.I. pipe, 20mm Nominal bore G.I. pipe Pipe of Spoke of Wheel, Not applicable for pipe as per IS 1161 Designation of Pipe of Spoke of Wheel ( as per IS 1161 ) Na - Number of Spokes in Wheel 6 - Connector Pipe ( between Main Central Pipe and Wheel ) 50 mm Nominal bore G.I. pipe 32 mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50 mm Nominal bore G.I. pipe Connector Pipe, Not applicable for pipe as per IS 1161 Designation of connecting pipe ( as per IS 1161 ) NA - MS Foundation Plate Thickness 12 10, 12 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI 2/5 Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 150mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NA - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Knobs on the Wheel for Gripping Polyurethane - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour Yellow - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free Yes - 3/5 from entrapments and sharp edges Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 5 15

Leg Press - Outdoor Gym Equipments Leg Press - Outdoor Gym Equipments ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Leg Press Double Leg Press Single, Leg Press Double SIZE Length 1612 - Width 650 - Height 1600 - CAPACITY Maximum User Weight ( Kg ) 100 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1161:2014, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Central Pipe 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS Best Quality - 1/5 1161 ) Moving Frame Pipe 32mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Moving Frame Pipe, Class as per IS 1239 Medium Medium, Not applicable for pipe as per IS 1161 Designation of Moving Frame Pipe ( as per IS 1161 ) Best Quality - Foot Rest Frame Foot Rest Hinging Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Frame Pipe, Not applicable for M.S. Plates Designation of Foot Rest Frame Pipe ( as per IS 1161 ) Best Quality - Connecting Links 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) Best Quality - MS Foundation Plate Thickness 12 10, 12 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 100mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) Best Quality - 2/5 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly Stainless Steel - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Foot Rest Fibre Reinforced Plastic - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 100 - OTHER REQUIREMENTS Ergonomic Design Yes - Foot rest shall be antislip/antiskid Yes - 3/5 Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 5 15

diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 10 10 (or higher) No of Phase - Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - Type of Engine cooling Air Cooled Air Cooled Type of governer Mechanical Mechanical, Electronic (or higher) Class of governer A2 A0, A1, A2 (or higher) Number of cylinders (nos) 2 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for 10 - 1/4 one hour for every 11 hours continuous running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 10 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 82.1 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Higher is better Thickness of Foam 40 - Density of Foam for sound insulation 32 - Noise level at 1 meter (dB) 71.5 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - Test Report number and date(Engine) - - 2/4 Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 2.0 Installation & Commissioning With Installation With Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 1 15

Steel Bookcases

Camera for CCTV System Experience with Gov. Required 3 Year (s) Camera For CCTV System ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing DOME CAMERA DOME CAMERA, BOX CAMERA, BULLET CAMERA IP Camera Yes Yes, No PTZ Camera No Yes, No IMAGE SENSOR Image Sensor Type CMOS CCD, CMOS Image Sensor Size 0.67 1, 0.67, 0.5, 0.34, 0.25, 0.357, 0.37, 0.4 (or higher) Camera Image Sensing capacity (Picture Mode) 2MP 1MP, 1.3MP, 2MP, 3MP, 4MP, 5MP, 6MP, 8MP Resolution D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 Pixel) D1 (704 x 480 Pixel), Full HD (1920 x 1080 Pixel), 4K HD (3840 X 2160 Pixel) Day/Night Capable true true, false 1/6 IR illumination Range(mtr) 30 15, 30, 50, 80, 100, 120, 150, NA OPTICS Lens Type Fixed * Focal Length(mm) 2.8 * Iris Control Yes * Focus Mode Auto, Zooming, One Push, Manual, NA * VIDEO Frame Rate (fps) 25 25, 60 Video Compression H.264, H.265 * Video Streaming Dual compressed stream Dual compressed stream, Triple compressed stream, Quad Compressed Stream PAN/TILT/ZOOM Panning Range NA * Pan Speed (deg/sec) NA 120, 240, 320, NA, 180 Tilt Range below horizontal (deg) NA * Tilt Range above horizontal (deg) NA * Tilt Speed (deg/sec) NA 90, NA Optical Zoom NA 12X, 20X, 30X, 36X, 44X, NA Digital Zoom NA 10X, 12X, 16X, NA AUDIO Audio Support false true, false Audio Compression NA * Audio Streaming One-Way * Number of Audio Input Channel 1 * Number of Audio Output Channel 1 * External Microphone Support false * ALARM Alarm Support false true, false Number of Alarm Digital Input 1 * Number of Alarm Relay Output 1 * Pre/Post Alarm Buffer false * SECURITY Multi Level User ID/Password Yes * IP Address Filtering true * 2/6 Encrypted Data Transmission HTTPS (SSL/TSL) * PERFORMANCE Minimum Illumination for Capturing Color Image 0.2 0.6, 0.2, 0.1, 0.05, 0.01 (or lower) Electronic Shutter Speed(sec) 1/3 to 1/10000 * WDR (Wide Dynamic Range) 80 dB 80 dB, 100 dB, 120 dB, DWDR SNR (Signal to Noise Ratio) 50-60 40-50, 50-60, 60-70, 70-80 Auto Exposure Auto Level Control * FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes * Auto Gain Control (On/Off selectable) Yes * Back Light Compensation Yes * Remote Administration (Remote configuration and status using web based tool) Yes * Remote System Update Over Network Yes * PC Client (PC application client with a channel recording feature support) Yes * Web Client (Viewer through HTTP system configuration) Yes * On Screen Display in English Yes * ONVIF Support Yes * Presets 15 * Group Touring 10 * Privacy Zones 4 * NETWORK AND INTERFACE Supported Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, SMTP, F TP, ICMP, HTTPS, DNS, DD NS, RTSP, RTCP, NTP, UPn P, QoS, TCP/IP, NA * IP Support Static, Dynamic, NA * Signal Processing Digital Signal Process * 3/6 IPv6 ready No * Wireless false * Simultaneous Connections 5 * STORAGE On Board SD Card Support false * SD Card Memory(GB) 32 * HOUSING Installation Type Indoor Indoor, Outdoor Material of the Housing construction Alluminium Alluminium, Plastic Protection IP 66 * Vandal Resistant Housing No * If Yes, IK rating NA * Mounting bracket Wall Mounted * Weight 387 * Dimensions (mm x mm x mm) 108MM X 84.9MM * POWER SUPPLY Power Input PoE * Power Consumption 12 * Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz NA * OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C * Relative Humidity Non Condensing (%) 95 * WARRANTY/SERVICES Warranty 1 1, 2, 3, 4, 5 (or higher) Time for Replacement of Defective Product During Warranty Period 72 12, 24, 36, 48, 72 (or lower) Supply of Compatible drivers and software included Yes * ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all parameters, features, and capability with Seller Yes * 4/6 Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes * Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest No * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest No * Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable No * BIS Registration for safety general requirements as per IS 13252 (Part 1):latest No * Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification false * Test Report Number and Date 01/05/2018 * Name and Address of Test Lab U L LAB * Certification NIL * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Dattatraya Kulkarni 425504, Director, Dadasaheb choudhry forest training institute, pal tah..raver, dist..Jalgaon 20 15

Desktops Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 2 Year (s) Desktops ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7400 (3.0 GHz, 4 Cores) Motherboard Chipset Intel B250 Intel B250 Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program 1/3 RAM Type of RAM DDR 4 - RAM Size (GB) 8 4, 8, 16, 32 RAM Expandability upto (GB) 32 32 RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Small Form Factor - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 2 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 2 - USB Port 3.0 (Number) 6 - Serial Port false - Parallel Port false - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 24 24 Monitor Resolution (PIXELS) 1920x1080 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker false - On Site OEM Warranty (Year) 3 3, 5 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shivlochan Netam 492010, Amanaka, G.E. Road 3 15