Organization Name Tender Results

Tree Guard Tree Guard ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values CONSTRUCTION/SIZE MATERIAL Construction Type Circular Tree Guard of Angle Iron consisting of two semi circular frames made of M.S. angle iron vertical member welded with M.S. wire mesh as per sketch (Fig. 2) uploaded in GeM Portal Circular Tree Guard of Angle Iron consisting of two semi circular frames made of M.S. angle iron vertical member welded with M.S. wire mesh as per sketch (Fig. 2) uploaded in GeM Portal Availability of Sketch (Figures) Yes - Sketch (Figures) have been seen, studied and understood Yes - Number of frames required to form Tree Guard 2 1, 2, 4 Width/Diameter of Frame (D) 450 300, 350, 375, 450, 600, 750, 800 Height (H1) of the frame/Mesh (excluding legs) 1200 1000, 1200, 1500 Number of Legs in each frame 3 2, 3, NA Height (H2) of the Legs (mm) 300 200, 300, 400, NA 1/3 Number of vertical members in each frame 3 2, NA Size of Vertical Member (mm x mm x mm) Angle Iron of 25 x 25 x 3 mm Angle Iron of 25 x 25 x 3 mm, Angle Iron of 25 x 25 x 5 mm, Round Bar of 10 mm dia., NA Number of cross supports in each frame 3 2, NA Cross support Size Flat of 20 x 3 mm Flat of 20 x 3 mm, NA Material of the Mesh M.S. Wire M.S. Wire Wire Mesh Diamter thickness 3.15 mm for M.S. Wire Mesh 3.15 mm for M.S. Wire Mesh, 2 mm for Plastic Mesh, 3 mm for Plastic Mesh Mesh Aperture Size (mm x mm) 40 x 40 12 x 12, 25 x 25, 40 x 40, 45 x 25, 75 X 50 Frame joining to form Tree Guard NA For joining angle iron frames together, two hloes of size 8 mm dia on each side of the vertical member be drilled on the flange of the angle where wire mesh is not welded., For joining Round Bar frames together, two M.S. Strips of size 15 x 15 x 2 mm welded on each side of the vertical member. Each M.S. Strip be drilled with a hole of size 8 mm., NA Hole position from the top of the frame (P1) NA 300, NA "Hole position from the bottom of the frame/mesh, excluding leg portion (P2)" NA 300, NA Provided Appropriate Nuts & Bolts for Forming Tree Gurad NA - Pre-treatment/finish of Tree guard Red-Oxide Primer + Painted Powder Coated, Red- Oxide Primer + Painted, Galvanized, Red- 2/3 Oxide Primer, NA for PVC/PP/HDPE Mesh Overall Weight 6.5 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rishi Kumar Rathore 496661, Town hall ward no 09 khsasia 200 15

Microscopes - Pathological and Research Microscopes - Pathological And Research ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type pathological monocular non hinged type with built in light and with light intensity regulator pathological monocular non hinged type with built in light and with light intensity regulator Conformity to Indian Standard Pathological IS:4381 latest * ISI MARKED false true, false Eye piece Type Huygenian Huygenian, Compensating Binocular Eye pieces Confirming to the requirements of IS: 8275/1976 ( latest) 'NA' for Monocular * Eye Piece with magnification monocular 10 x monocular 10 x Objective Type achromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 40 x 40 x, 100X Numerical Apperture 0.65 0.65 1/3 of Objective Type of lamp for Illumination led * GENERIC Plano Concave mirror attachment yes * Stage Ractangular * Size of Stage 120X132mm * Coarse and Fine Movement of stage yes * Co-axial focussing true * Micrometer Arrangement true * ACCESSORIES Extra eyepieces (inclusive in the scope of supply) 10 x 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) yes * WARRANTY Warranty 1 1, 2, 3, 4, 5 (or higher) CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false * Test Report No and Date NA * Name and Address of the Lab NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Krishan Kumar 301702, Govt. College Bibirani (Alwar) Near Bibirani Temple Tehsil- Kotkasim Bibirani (alwar) 10 15

Desktops

LED Luminaire (for Flood Light) ( PAC Only ), LED Luminaire (For Road and Street Lights) ( PAC Only ), LED Luminaire (Recessed Luminaire) ( PAC Only ), LED Luminaire (Recessed Luminaire) ( PAC Only ) LED Luminaire (for Flood Light) ( 20 ) ( Under PAC ) Make shreeg Model glitz300 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 Yes * 1/55 (exempt group) Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 300W * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP65 IP66, IP65, IP67 Mounting brackets (included) Adjustable * Warranty for free replacement (in Years) 2 * ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * Total Harmonics Distortion (in %age) ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥70 * 2/55 Beam Angle ≥120 * Optic lense materal (UV stabilised) (Write NA for without optic lense supply) NA * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature < 85 degC * Operating temperature range -10 deg C to +55 deg C * Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients ( Internal) >/=4KV * The luminaire shall be protected against surges and transients of >/=10KV (External) No * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant epoxy powder Yes * 3/55 coated All fastners must be of stainless steel Yes * The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes * Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall 50 cm * 4/55 be provided along with supply of material) Light Source SMD LED Chip as per LM 80/IS16106 * MARKING "Manufactures Name and and brand on the aluminium die cast body Engraved/Embossed * Manufacturer’s name, model number, serial number Yes * Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes * LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports Yes * 5/55 and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report on demand by buyer/consignee Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 20 15 LED Luminaire (for Flood Light) ( 13 ) ( Under PAC ) 6/55 Make shreeg Model glitz200w Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 200W * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP65 IP66, IP67 Mounting brackets (included) Adjustable * Warranty for free replacement (in Years) 2 * ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * 7/55 Total Harmonics Distortion (in %age) ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥70 * Beam Angle ≥120 * Optic lense materal (UV stabilised) (Write NA for without optic lense supply) NA * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature < 85 degC * Operating temperature range -10 deg C to +50 deg C * Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * 8/55 The luminaire shall be protected against surges and transients ( Internal) >/=4KV * The luminaire shall be protected against surges and transients of >/=10KV (External) No * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant epoxy powder coated Yes * All fastners must be of stainless steel Yes * The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes * Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, 4 Nos. 9/55 Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm * Light Source SMD LED Chip as per LM 80/IS16106 * MARKING "Manufactures Name and and brand on the aluminium die cast body Engraved/Embossed * Manufacturer’s name, and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports Yes * 10/55 shall be furnish on demand by buyer/consignee) LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, ) Yes * LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report on demand by buyer/consignee Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of Yes * 11/55 BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 13 15 LED Luminaire (for Flood Light) ( 12 ) ( Under PAC ) Make shreeg Model glitz50w Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 50W * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection IP65 IP66, IP67 12/55 (IP Rating) as per IS:10322 (Part 1):1982 latest Mounting brackets (included) Adjustable * Warranty for free replacement (in Years) 2 * ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * Total Harmonics Distortion (in %age) ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥70 * Beam Angle ≥120 * Optic lense materal (UV stabilised) (Write NA for without optic lense supply) NA * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature < 85 degC * 13/55 Operating temperature range -10 deg C to +50 deg C * Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients ( Internal) >/=4KV * The luminaire shall be protected against surges and transients of >/=10KV (External) No * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant epoxy powder coated Yes * All fastners must be of stainless steel Yes * The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes * Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass Yes * 14/55 cover and the metal housing to exclude the entry of the dust, Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Number of electronic control gear (power supplies) 1 No. 1 No., and lot number as identification mark Yes * 15/55 inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, ) Yes * LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government lab/NABL/ILAC Yes * 16/55 accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report on demand by buyer/consignee Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 12 15 LED Luminaire (For Road And Street Lights) ( 10 ) ( Under PAC ) Make shreeg Model glance120w Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * 17/55 Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated Power 120W * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 * Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes * Total Harmonics Distortion ≤ 10 * "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes * OPTICAL LED chip Efficacy ≥130 Lm/Watt * Colour temperature 6000+/-500K * Working life for LED (Minimum 50, 000 burning hours as per Yes * 18/55 LM-80 and LM 21 reports) Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=4KV * The luminaire shall be protected against surges and transients of >/=10KV (External) No * CONSTRUCTIONAL The Luminaires casing/housing (single Yes * 19/55 piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 * Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three Yes * 20/55 wires system (Phase, Neutral and Earth) Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed * Manufacturer’s name, and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * 21/55 LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, ) Yes * LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable Yes * 22/55 on date * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 10 15 LED Luminaire (For Road And Street Lights) ( 6 ) ( Under PAC ) Make shreeg Model glance70w Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B * Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 * LED Rating (in Watts)/System Wattage/Rated Power 70W * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 * 23/55 Warranty for free replacement (in years) 2 2, 000 burning hours as per LM-80 and LM 21 reports) Yes * Colour Rendering Index(CRI) ≥70 * LED Beam Angle ≥120 * Optic lense materal (UV stabilised) Poly carbonate lense * THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * 24/55 Operating temperature range -10 deg C to +55 deg C -20 deg. C to +50 deg. C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * Over Voltage protection Yes * Reverse polarity Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M Ohm * The luminaire shall be protected against surges and transients ( Internal) >/=4KV * The luminaire shall be protected against surges and transients of >/=10KV (External) No * CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 * Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal Yes * 25/55 between the UV Glass cover and the metal housing to exclude the entry of the dust, 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 * Driver components shall be industrial grade or above Yes * PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes * The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes * Suitable connector shall be provided for LED connection between driver output and LED Yes * Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, and lot Yes * 26/55 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes * Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes * REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND * System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, ) Yes * LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer Yes * 27/55 consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller shall furnish the Type test reports to the buyer/consignee on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 6 15 LED Luminaire (Recessed Luminaire) ( 65 ) ( Under PAC ) Make shreeg Model glim6 Technical Specifications 28/55 * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated Power 6W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 6000 deg K * Type of fixture (in feet) 1x1 (for 3W to 16W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder Yes * 29/55 coated/anadozing All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes * Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or Yes * 30/55 better Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) Yes * 31/55 (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, ) LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity 32/55 S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 65 15 LED Luminaire (Recessed Luminaire) ( 6 ) ( Under PAC ) Make shreeg Model glimmer12rs Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated Power 12W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 6000 deg K * 33/55 Type of fixture (in feet) 1x1 (for 18W to 28W) 1x1 (for 3W to 16W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 Yes * 34/55 burning hours as per LM-80 report) Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, and lot number as identification mark inside each unit and the outside of each packaging box Yes * 35/55 The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, ) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear Yes * 36/55 for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 6 15 LED Luminaire (Recessed Luminaire) ( 26 ) ( Under PAC ) Make shreeg Model glimmer18rs Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules Type 3 * 37/55 as per the IS: 16103(Part-2)/2012 Rating of Recess type LED Luminaire/System Wattage/Rated Power 18W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 6000 deg K * Type of fixture (in feet) 1x4 (30W to 48W) 1x1 (for 3W to 16W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% Yes * 38/55 (for above 20W) The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients Yes * 39/55 of >/=2.5 KV MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, ) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the Yes * 40/55 LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 26 15 LED Luminaire (Recessed Luminaire) ( 10 ) ( Under PAC ) Make shreeg Model glim15 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian IS:10322/part * 41/55 Standard 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated Power 16W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic 1 * 42/55 control gear (power supplies) Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature -10 deg. C to +55 deg. * 43/55 range C Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on Yes * 44/55 demand (LM-79 report shall have total lumen output, ) LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. 10 15 45/55 (C.G.) LED Luminaire (Recessed Luminaire) ( 1 ) ( Under PAC ) Make shreeg Model glamour1t Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * Rating of Recess type LED Luminaire/System Wattage/Rated Power 6W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 46/55 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Poly carbonate (UV stabilised) * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 burning hours as per LM-80 report) Yes * Colour Rendering ≥80 * 47/55 Index(CRI) Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated Yes * 48/55 power in watts shall be marked inside each LED luminaire unit REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX * LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, ) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * 49/55 LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 1 15 LED Luminaire (Recessed Luminaire) ( 1 ) ( Under PAC ) Make shreeg Model glamour30 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * 50/55 Rating of Recess type LED Luminaire/System Wattage/Rated Power 30W * Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Acrylic * The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes * The total circuit power Yes * 51/55 shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +55 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against surges and transients of >/=2.5 KV Yes * MARKING Manufactures Name Engraved/Embssed * 52/55 and brand shall available on the body of the Luminaire Each LED liminaire shall have the manufacturer’s name, ) Yes * LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes * 53/55 Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes * Seller has to furnish Type test report to the buyer on demand Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, Raipur. (C.G.) 1 15

underwater lighting ( PAC Only ) Underwater Lighting ( 10 ) ( Under PAC ) Make shreeg Model bl113 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of lamp LED Halogen, Xenon, LED Type of battery NiMh NiMh, Ni-Cd, Li-ion Battery Voltage (Volt) 0 * Battery capacity (AH) 0 * CONSTRUCTIONAL Type of front glass Toughened, scratch resistant * One hand operated switch Yes * Built-in battery charger Yes * Short circuit protection Yes * Protection from battery over-discharge Yes * Protection from battery over-charge Yes * Protection against reverse polarity Yes * 1/3 Provision of Lanyard strap Yes * Sea water/floodwater resistant material of housing Yes * Type of housing material Aluminum * Gross weight of torch in air (gms) 0 * Accessories such as spare lamp, battery, charger, lens to be supplied Yes * FUNCTIONAL Light output of torch (Lumen) >/=700 * Wattage of lamp (watt) 9 * Color temperature (Degree K) 3000 * Lamp life (hours) 50000 * Lamp dimming Continuous * Lamp dimming upto (%) 0 * Beam angle selection Narrow Narrow, Wide Range of Narrow beam angle (degree) 0 * Range of wide beam angle (degree) 120 * Effective distance to illuminate underwater (meter) >/=2 * Continuous torch operation time at maximum lumen output (Hours) >/=2 * Battery charging time (hours) </=5 * Operational depth under water (IN Metre) 0 * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes * Test report number BL113/Test/11113 * 2/3 Date of test report 3/2/2018 * Test report for water proofness of torch at Max. depth Yes * Name and address of laboratory ShreeG LED Raipur Chhattisgarh * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 10 15

Light Emitting Diode LED Fixture- LED tube light ( PAC Only ) Light Emitting Diode LED Fixture- LED Tube Light ( 30 ) ( Under PAC ) Make shreeg Model gleam22 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 22 Watt/2200 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * 1/3 LED Make OSRAM * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0, 25 * Power Factor >/= 0.9 * 2/3 CERTIFICATIONS BIS Registration certificate under (CRS) number and date 2017-2694 * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report TLSL/TEST/1122 * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahadev Bhoi 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 30 15

LED Lamps- bulb Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 5 Year (s) LED Lamps- Bulb ( 10000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC LED LAMP Power Ratings/LED Lamp Luminous Flux 18Watt/1800 Lumens 3Watt/300 lumens, 5Watt/500 lumens, 7Watt/700 lumens, 9Watt/900 lumens, 12Watt/1200 Lumens, 15Watt/1500 Lumens, 18Watt 1800 Lumens Colour Temperature (K) 5700 2700, 4000, 5700, 6500 Type of Lamp CAP B22d B22d, E27 Warranty for free replacement (Years) 2 Years 2 Years, 3 Years Conformity to Indian Standard IS:16102 part I and Part II latest * FUNCTIONAL LAMP Efficacy (Lm/W) >/=100 * LED Chip Efficacy (Lm/W) >/=130 * 1/4 Colour Rendering Index(CRI) >/=80 * Beam Angle (Degree) >/=120 * Power Factor >/=0.9 * Total Harmonics (%) </=15 * Driver Efficiency (%) >/=85 * LED chip Wattage (Watt) </=1 * Surge Voltage withstand (KV) 2.5 * Operating Voltage range (Volts) 100 Volt to 300 Volt * Rated Voltage for Performance and life (Volts) 220 Volt to 240 Volt * Lumen maintenance @ 25 deg after 6000 hours (%) >/=80 * CONSTRUCTIONAL Light Source (as per LM80 orIS16106) AS PER OEM LM80 REPORT * LED Make EVERLITE/NATION STAR * Light Source (as per LM80/IS16106) SMD LED Chip * Lamp Shell material Polycarbonate * Ingress Protection in IP >/=20 * TEST REPORT AND CERTIFICATIONS LED life Certificate for 25000 hrs as per LM80 Yes * LED life test Certificate No. R2DG131110050-10 * LED life Certificate Test Report Date 06/08/2014 * LED lamp life certificate for 6000 hrs Yes * LED Lamp certificate Number GR/20180105 * LED Lamp Life Certificate date 01/05/2018 * Name of Lab where test conducted INTERNAL LABORATORY * EMC Test Yes * Availability of test Report to IS:16102 Part I and IS:16102 Part II latest Yes * 2/4 Test certificate No. GR/20180105 * Test Report Date 01/05/2018 * Name of lab where test conducted INTERNAL LABORATORY * Complusory Registration(CRS) of BIS for safety as per IS 16102-I Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Apan Debnath 799001, AGARTALA MUNICIPAL CORPORATION CITY CENTRE, PARADISE CHOWMUHANI, AGARTALA, WEST TRIPURA 10000 15

Air Conditioner

dewatering pumps Average Turn Over of Last 3 Years 25 Lakh (s) Experience with Gov. Required 5 Year (s) Dewatering Pumps ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Dewatering Pump set DEWATERING PUMPS Or ENGINE MONOSET PUMPS generally incompliance to IS 11501 : 1986 (REAFFIRMED 2016) Complete unit including pump & engine duly coupled along with auto prime system, fuel tank etc shall be mounted on a two wheeled trolley for easy transportability, The trolley shall be equipped with Leaf Springs for Suspension, Support for Rear end and Towing Bar, Parking Breaks etc and The trolley must have minimum ground clearance of 300 mm, below leaf spring - 1/6 Type of pump Back Pull Out - Model Number of Pump Chiemsee A - Service/Duty Continuous - Location Outdoor - Fuel supply Fuel Pump by Gravity Feed through Tank - Starting Both Hand Start, Battery Start, Both CONSTRUCTIONAL Make of Pump Spechtenhauser - Casing Granded Cast Iron - Impeller Stainless Steel of Grade 20 Cr13 of Is 6603 Cast Iron of Grade FG200 of IS210, Stainless Steel of Grade 04 Cr13 of Is 6603, Stainless Steel of Grade 12 Cr13 of Is 6603, Stainless Steel of Grade 20 Cr13 of Is 6603 Casing and Impeller Wearing Ring If provided otherwise put NA Brass Cast Iron of Grade FG200 of IS210, Bronze of Grade LT82 of Is 318, Brass, NA Shaft Type Stainless Steel Chrome Steel, Stainless Steel Gland Packing Type Non Asbestors - Blade Material Aluminium Aluminium, Stainless Steel Sleeve Brass Brass, Bronze, Stainless steel Bracket Stainless steel Granded Cast Iron, Stainless steel, Others Suction Flange Stainless steel Granded Cast Iron, Others Net Positive Suction Head (NPSH) 5 - Volute Casing Granded Cast Iron - Gland Packing set Threaded Graphite Cotton - One number suitable size suction strainer and Non Return Value to be supplied with each pump Yes - Number of Stages 1 Dimension of Pump Set ( L x B x H )(mm) 500x395x435 - 2/6 Weight of Pump Set 53 - Minimum Submerge 0.1 - Delivery Flange Mild Steel - Material of Trolley MS fabricated - Suction and Delivery Pipe Dimensions ( mm x mm) (mm x mm) 100x100 - The engine shall be Vertical, inline, diesel engine capable of continuous operation and must be equipped with 12 volt starter and alternator, control panel, wiring harness for panel fuel pipes and suitable battery Yes - 12 V starting system complete with starter motor, charging alternator and Cutout Yes - Engine Make Spechtenhauser - Number of Cylinder 1 1, 2, 3, 4 Engine Capacity 3.2 Power input to pump at Duty Point (Kilowatt) 3.2 - Diesel engine be closed coupled and mounted on a base plate robust Yes - Material of Base Plate on which Engine is Mounted Mild Steel - Make of Engine Control panel Others - Engine Control Panel with Following Items i Engine START switch ii Engine oil Pressure meter iii Engine Temperature meter iv Ampere Meter v Emergency Engine Stop Switch Engine oil Pressure meter Vi Engine Hour Meter Vii Fuel Indication meter Viii RPM Meter Yes - Safety controls to shutdown the engine in Yes - 3/6 the event of low lub oil pressure or high cylinder head temperature in case of air cooled engines Exhaust silencer of Residential type application Yes - Rotation: clock wise while facing the flywheel end Yes - Fuel Tank Capacity for min 24 hours continous running at full load 10 - Temperature Rise 30 - Standard set of tools consisting of set of 3 spanners, one screw driver, one standard plier and one nose plier of appropriate engine size shall be provided to the consignee along with, free of cost for each of Pump Set yes - Supply of Auto prime, horizontal, end suction, centrifugal type pumping unit capable handling floating material/soft solids like wooden pieces, muddy water, etc yes - PERFORMANCE Capacity (Rate of Flow) ( m³/hr) 150 50, 100, 150, 200, 250, 300, 600, 900 Total Head (min) Corrsponding to Capacity and Speed (metres) 14 - Speed in RPM (rpm) 1400 - Pump Efficiency at Duty point Corrsponding to Capacity and Speed ( water delivered/Pump Input ) (%) 75 - Lub Oil Consumption (g/k Wh) : (g/k Wh) 10 - All rotating parts be dynamically balanced for longer bearing life yes - 4/6 and vibration free smooth and silent operation The pump shall be capable of developing required head at rated capacity for continuous outdoor operation External conditions like Rain, Snow and humidity should not affect pumping operation yes - The shut off head of the pump shall not less than 12% of head at rated capacity for 3 cusec and 5 cusec pumps having 10 mtrs As duly point head yes - The pump should be capable of starting without external priming and should be capable of operation with least human intervention yes - The pump must have non-overloading characteristics and the prime mover ie engine shall not get overloaded in the entire range of operation yes - CERTIFICATION ISI marked false true, false CM/L No and date - - Availability of Type Test Report for conformity IS as per IS:10, 001latest/IS 1117 0latest/IS:7347latest forEngines, to IS:11501 latest and IS:9137 latest for pumps and other parameters to specification from any ILAC/NABL accredited/Central Govt LAB yes - Test cetificate No and Date - - 5/6 Name and address of the Lab - - Test report and certifications to be furnished to the buyer on demand yes - Warranty (Years) 1 1, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shaileshkumar Ishwarbhai Dhodi 396215, Plot No. 51, GIDC, Fire Force Headquarters, Ringanwada, Nani Daman 3 15

food service glasses and cut glass dishes tumblers bowls mugs cups saucers vases Food Service Glasses And Cut Glass Dishes Tumblers Bowls Mugs Cups Saucers Vases ( 10000 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Glassware conforms to As Per IS:1961 Latest Yes - Item Cut glass -Tableware Type Mugs Mugs Designe Colour of Cut glass Coloured - Handle With - Artistic design, Pattern and Logo Machine Crafted Machine Crafted Lid Without With, Without Inner side of glasswares Plane surface Crafted surface, Plane surface Spout Without With, Without Material Types of Glass Borosilicate glass Soda glass, Crystal (Leaded) Glass, Borosilicate glass, Coloured glass Grade of Glass Material Food Grade Glass - Dimension Nominal Capacity, ml (ml) 300 300 1/3 Min. Thickness, mm (mm) 1.5 As per GeM Catalogue. Top diameter/width, mm (mm) 75 As per GeM Catalogue. Bottom diameter/width, mm (mm) 80 As per GeM Catalogue. Overall height, mm (mmm) 95 As per GeM Catalogue. Weight of single piece, gm (gm) 100 As per GeM Catalogue. Performance Suitable for microwave oven false true, false Temperature difference withstand capability for Thermal shock, deg.C (deg.C) 50 As per GeM Catalogue. Set No. of pieces in a set (Nos.) 1 - Test Report Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab covering all the declared parameters as per IS specification false - Test Report No 0 - Test Report Date 0 - Name of Lab 000 - Address of Lab 000 - Test furnished by Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vinod Singh Tolia 248001, DIRECTORATE OF HEALTH, DANDA LAKHOND SAHASTRADHARA ROAD, DEHRADUN 10000 30

Package No.2: ATAL TINKERING LAB OF NITI AAYOG RAPID PROTOTYPING TOOLS Package No.2: ATAL TINKERING LAB OF NITI AAYOG RAPID PROTOTYPING TOOLS ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values BASIC INFORMATION Name of NITI AAYOG Package Package No.2- ATAL TINKERING LAB of NITI AAYOG Rapid Prototyping Tools * Conformity to technical Specification As per QR/specification for Package No.2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG(Approved Copy of Qrs/Specification uploaded in GeM portal) As per QR/specification for Package No.2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG(Approved Copy of Qrs/Specification uploaded in GeM portal) Availability of QR/specification for 'Package No 2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools ' Yes Yes 1/3 All guidelines and documents mention on AIM portal (http: aim(dot)gov(dot)in/g uidelines-for- school(dot)php) have been read, seen and understood completely Yes Yes QR/specification and scope of supply have been read, seen and understood completely Yes Yes Acceptance of QR/specification, scope of supply, all guidelines and documents mention on AIM portal completely Yes Yes Acceptance of complete Scope of supply of Package No 2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools covers all components accessories complete as per governing QR/specification Yes Yes Features and Functionality ATL Equipment List of Package No 2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools supplied for the Batch of students 60 students, 90 students 60 students, 90 students Vendors to provide installation and equipment training to the schools on handling and usage of equipment, after the delivery of equipment, at no additional charge Yes Yes Vendors to provide 2 years of comprehensive warranty at no additional charge Yes Yes 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vasudha K 560026, BBMP GIRLS HIGH SCHOOL, PADARAYANAPURA, BANGALORE 560026 1 28

Desktops

telecommunication cable Telecommunication Cable ( 5000 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Govering Specification for telephone pair cable TEC Specification G/WIR06/02 * Conductor diameter Nominal (Range) (mm) 0.45 * Number of pair (Number) 4 * Lenght of cable in a bundle (Mtrs) 100 * CONSTRUCTIONAL Telephone Pair cable used for Telecom data transmission, Intercome, EPBAX, FAX, Closed circuit security System. Yes * Conductor Materail Copper * Insulation PVC * Shelding No * Minimum Diameter over insulation (mm) 5.9 * Overall diameter of 13.6 * 1/3 cable (mm) CERTIFICATIONS Product Conforming to TEC Specification Yes * Distinct Color Coding system As per TEC Specification * Availability of complete and satisfactory type test Report from Central govt/NABL ILAC accredited laboratory as per Govering Specification Yes * Test certificate number DISISOL/GS/346 * Test report date 12 OCTOBER 2017 * Name of lab where test conducted INDORE * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman Hanmanta Chalwadi 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 5000 15

dc power supply Dc Power Supply ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values FUNCTIONAL Maximum Power (Watt) 120 watts * DC Current Output Rating (Ampere) 0 to 4 * DC Voltage Output Rating (Volt) 0 to 30 * Load Regulation (Voltage) ± (% of output + offset) less than 0.01 +2 (milli volt) * Load Regulation (Current) ± (% of output + offset) less than 0.05 + 1.5 mA * Line Regulation (Voltage) ± (% of output + offset) less than 0.01 + 1 mV * Line Regulation (Current) ± (% of output + offset) less than 0.05 + 0.1 mA * Over Voltage Protection Accuracy +- 0.5 + 0.5 V * Over Voltage Protection Response Time (milli less than 10 milli second * 1/3 sec) Ripple and Noise Voltage (20 Hz to 20 MHz) less than 1 mVrms less than 4 mVpp * . Ripple and Noise Current (20 Hz to 20 MHz) less than 4 milli amps rms * Readback Voltage Accuracy 0.05 + 10 mV * Readback Current Accuracy 0.15 + 5 mA * Read back Voltage Resolution (mV) 1 * Readback Current Resolution (mA) 0.1 * CONSTRUCTIONAL PC Interface USB/GPIB/RS232/LXI * Weight (gms) less than 12 kg * Warranty (Year) 1 1, 2 CERTIFICATIONS Operating Temperature (Degree C) 50 * Gperating Humidity (RH) (%) 0 * Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to prove conformity to the specification including environmental tests as under : (a) Dry Heat : For 16 hrs. at a temp. of 55 degree C in accordance with IS:900 0/part-3/section-5/1977 (reaffirmed in 2007). (b) Cold Test : For 4 hrs. at a temp. of -20 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (reaffirmed in 2007). (c) Damp Heat (Cyclic)Test : For 2 Cycles of 24 h each at a temp. of 40 degree C & 95% RH in accordance with IS:900 0/part-5/section-1 1991 (reaffirmed in 2007). After environmental conditioning sequence Yes * 2/3 as above and a recovery period of two hours, the instrument shall be checked for complete functional parameters, which should be with in limits.(Test reports are to be furnished when demanded by buyer) Test Report No. ACS/Test/11SG5463 * Test Report Date 3/2/2018 * Name and address of the Lab Shreeg LED Raipur Chhattisgarh * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandramani Prasad 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 10 15

Printer

Notebook Computers-laptop, Notebook Computers- laptop Notebook Computers-laptop ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7 th 6 th, 7 th, 8 th Processor Intel Core i7-7700HQ (2.80GHz, 6MB Cache, 4 Cores) * Graphics Graphics Type Integrated * Graphics Card Description intel hd * Graphics Memory (GB) 1 * Memory Type of RAM DDR 4 * RAM Size (GB) 8 4, 8, 16, 32 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 32 8, 32, 64, NA RAM Speed (MHz) 2400 * Storage Type of Hard Disk SATA SATA, SSD, Fusion, 1/6 Drive PCIe-based onboard SSD Hard Disk Drive Size( GB) 1000 128, 256, 512, 500, 1000, 2000 (or higher) Hard Disk Drive Speed (rpm) 5400 * Operating System Operating System Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra or Latest, DOS Ports USB 3.0 or higher (No.) 2 * USB Type C Not-Available * VGA Port Not-Available * HDMI Port Available * DISPLAY PORT Not-Available * Thunderbolt Port 1 * Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 * Wi-fi Connectivity 802.11 a/b/g/n * Bluetooth 4.0 or higher * Display LCD LED Backlit Display Type Non Touch Touch, Non Touch Display Size (Inch) 14 11-16 Display Resolution (Pixel) 1440 x 900 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes * BIS Registration no. - * BEE/Energy Star Certification - * ROHS Compliance Yes * Additional feature Finger Print Reader Yes * Webcam (HD or Better) Available * Miscellaneous Optical Drive Available * Keyboard Standard * Trusted Platform Module Enabled No * Weight (With Battery) 1.9 * 2/6 (Kg) Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Removable * Battery Back-up (Hours) 4 * Warranty Battery Warranty (Year) 1 1, 3 (or higher) On Site OEM Warranty (Year) 3 1, 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 CHAYA KULKARNI 580005, O/o THE STORE PURCHASE OFFICER, KRISHINAGAR UNIVERSITY OF AGRICULTURAL SCIENCES DHARWAD 2 15 Notebook Computers-laptop ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, 8 th Processor Intel Core i5-7200U (upto 3.1 GHz, 3 MB cache, 2 cores) * Graphics Graphics Type Integrated * Graphics Card Description HD * Graphics Memory (GB) INTEGRATED HD * Memory Type of RAM DDR 4 * RAM Size (GB) 8 4, 32 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 16 8, NA 3/6 RAM Speed (MHz) 2133 * Storage Type of Hard Disk Drive SATA SATA, PCIe-based onboard SSD Hard Disk Drive Size( GB) 1000 128, 2000 (or higher) Hard Disk Drive Speed (rpm) 7200 * Operating System Operating System Windows 10 Professional Windows 10 Home, DOS Ports USB 3.0 or higher (No.) 3 * USB Type C Not-Available * VGA Port Available * HDMI Port Available * DISPLAY PORT Not-Available * Thunderbolt Port Not-Available * Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 * Wi-fi Connectivity 802.11 a/b/g/n * Bluetooth 4.0 or higher * Display LCD LED Backlit Display Type Non Touch Touch, Non Touch Display Size (Inch) 14 11-16 Display Resolution (Pixel) 1366 x 768 1366 x 768, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes * BIS Registration no. - * BEE/Energy Star Certification - * ROHS Compliance Yes * Additional feature Finger Print Reader Yes * Webcam (HD or Better) Available * Miscellaneous Optical Drive Available * Keyboard Standard * Trusted Platform Yes * 4/6 Module Enabled Weight (With Battery) (Kg) 1.5 * Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in * Battery Back-up (Hours) 4 * Warranty Battery Warranty (Year) 3 1, KRISHINAGAR UNIVERSITY OF AGRICULTURAL SCIENCES DHARWAD 3 15

Modular Table

Notebook Computers-laptop

Desktops

Desktops Desktops ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Motherboard Chipset Intel H270 * Expansion Slots (PCIe x 1) (Number) 1 * Expansion Slots (PCIe x 4) (Number) 1 * Expansion Slots (PCIe x 16) (Number) 1 * Graphics Graphics Type Integrated * Graphic Memory N/A * Operating System Operating System (Pre-Loaded) Windows 10 Home Windows 10 Professional, Linux, DOS, Windows 10 Home, Windows 10 Professional under 1/4 Microsoft Shape the Future Program RAM Type of RAM DDR 4 * RAM Size (GB) 4 4, 8, 16, 32 (or higher) RAM Expandability upto (GB) 32 16, 32, 64 (or higher) RAM Speed (MHz) 2400 * Storage Hard Disk (GB) 1000 500, 1000, 2000 (or higher) Cabinet Cabinet Small Form Factor * Cabinet Volume (Litres) - * Internal Bays 1 * External Bays (Number) 0 * DIMM Slots (Number) 2 * Connectivity Wireless Wi-Fi 802.11ac + Bluetooth * Network Connectivity 10/100/1000 on board Integrated Gigabit Port * Ports USB Port 2.0 (Number) 2 * USB Port 3.0 (Number) 2 * Serial Port false * Parallel Port false * VGA true * HDMI true * Display Port false * Monitor Monitor Size (INCHES) 19.5 19.5 (or higher) Monitor Resolution (PIXELS) 1920x1080 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - * Power Power Supply (Watt) - * Minimum Power Efficiency(%) 85 * Certification ROHS Compliance Yes * BEE/Energy Star for the given Model true * Input Devices Mouse Optical * Keyboard Standard * 2/4 Generic Optical Drive DVD R/W * Internal Speaker false * On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Sharma 322001, ALANPUR NURSERY NEAR SAMANYA HOSPITAL, SAWAIMADHOPUR 3 15

Air Conditioner

Veterinary Vitamin and Mineral Mixture Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 3 Year (s) Veterinary Vitamin And Mineral Mixture ( 7661 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERAL Type of Mineral Mixture Chelated Vitamins & Minerals Type 1 (Mineral Mixture containing salt) as per IS 1664:2002 (Latest Revision), Type 2 (Mineral Mixture without salt) as per IS 1664:2002 (Latest Revision), Chelated Vitamins & Minerals Conformity to Indian Standard IS 1664:2002 (Latest Revision) Yes * Product is ISI Marked false true, false BIS Lisence No (CM/L No) na * Type of Animal for Which Material Suitable Cow * 1/5 The material shall be free flowing powder and free from adulterants, insect, visiible fungus infestation and undesirable odour Yes * The material shall be free from spores of Bacillus anthracis Clostridium sp when tested by the method described In 4 5 and 6 of IS 7874 ( Part 3 ) Yes * The Type 1 material shall pass more than 70% by mass through 200 micron IS sieve (IS:460 -Part 1) NA * The Type 2 material shall pass more than 90% by mass through 200 micron IS sieve (IS:460 -Part 1) NA * Shelf life (in months) from the Date of Manufacturing 24 12, 24, 36, 48, 60 Feeding Instructions AS PER DOCTOR * INGREDIENTS Composition Requirements of the Mineral Mixture As per Clause 6.3 of BIS Specification given in IS 1664:2002 (Latest Revision) * Calcium Carbonate - true, false Ground Limestone (with low magnesium content) - true, false Calcite Powder - true, false Dolomite Limestone - true, false Oyster Shell Grit - true, false Dicalcium Phosphate (conforming to IS 5470) - true, false Magnesium Carbonate - true, false Magnesium Oxide (calcined magnesite) - true, false Manganous Sulphate (dried/monohydrate) - true, false 2/5 Zinc Carbonate - true, false Zinc Chloride - true, false Zinc Sulphate (dried/monohydrate) - true, false Potassium iodide (stabilized) - true, false sodium iodide - true, false Potassium iodate - true, false Calcium iodate - true, false Cupric Sulphate - true, false Cupric Chloride - true, false Cobalt Sulphate - true, false Cobalt Chloride - true, false Common Salt (IS 920) - true, false Sodium Thiosulphate (anhydrous) - true, false Ferrous Sulphate (dried/monohydrate) - true, false All ingredients used shall be suitable for Cattle's consumption and shall contain no substances harmful to Cattle - Animal origin material shall not be used Yes * PACKING & MARKING Air tight moisture proof packing, sound, clean and free from casual agents of infectious diseases & parasites Yes * Pack Size (grams) 1000 200, 500, 1000, 2000, 5000, 10000 Type of Packing Container Bag Bag, Tin, Carton, Box, Drum Material of Packing Container POUCH * Marking on the Container As per Clause 7.2 of IS 1664:2002 (Latest Revision) * CERTIFICATIONS Original Manufacturer with Valid Manufacturing License/Registration Certificate Yes * 3/5 License issuing authority na * Manufacturing License No/Registration Certificate No na * Manufacturing License Date/Registration Certificate Date na * Manufacturer has not been Black Listed by any Government agency/Institution of local self Government/Public Sector in India Yes * Availability of the Product in market at least for past 3 years from commencement of its manufacturing Yes * Availability of Good Performance Certificate YES * The Firm is registered with NSIC/SSI false * Certification for Manufacturing Premises na * Submission of Analysis/Test Report for each batch from FDA approved laboratory/Govt Lab/Govt approved lab/Agency conforming all the declared parameters of the specifications to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Tukaram Survase 413512, Animal Husbandry Department, Zilha Parishad, Latur Shivaji Chouk, Behind Old Collector Office, Barshi Road, Latur 7661 30

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 3 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source COB LED Chip * LED Make HAVELLS * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy 100 * 1/3 (Lm/W) Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0, 25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date IS 103222(PART 5/SEC 1) in REGISTRATION NO R-84000019 DATED 18/10/2017 * 2/3 Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report 124421 12/9/17 * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 50 15

Safety Equipment Tool Kit for Labours Safety Equipment Tool Kit For Labours ( 135000 ) Technical Specifications Specification Specification Name Values Allowed Values Standards Confirmity to Standards for Industrial Safety Helmet to be included in the safety kit IS 2925 with latst amndmt IS 2925 with latst amndmt BIS Marked true true If BIS marked enter CML no otherwise put NA 8669811 - Confirmity to standards for Filtering half Mask as respiratory protective devices included in the safety kit IS 9473-2002 with latest amdmnt. IS 9473-2002 with latest amdmnt. Filtering Half Mask BIS Marked (Please indicate NA if other standards are applicable) Yes Yes If Filtering Half Mask is BIS Marked enter CML no otherwise Put NA 8100053496 - BIS Marking for true true 1/10 boots If Saftey Boot is BIS Marked Enter CML No otherwise put NA 5190258 - Confirmity to standards for safety Gloves EN 388 with latest amdmnt for safety Gloves EN 388 with latest amdmnt for safety Gloves Confirmity to CE marking for safety gloves true true Confirming standards for safety Jacket EN 471 -2003 + A1 2007 with latest amdmnt. EN 471 -2003 + A1 2007 with latest amdmnt. Require CE Certification as Per : EN 471 -2003 + A1 2007 for safety jacket Yes - The safety jacket shall be High visibility warning garment with synthetic side fasteners Yes - Performance Parameters Material construction of the head band, anti concussion tape etc for Safety Helmet Nylon - Type of Adjustment for Safety Helmet Manual - Design of Safety Helmet Nape Type Nape Type Ear Muff provided for Safety Helmet false Material of Ear Muff if Provided in safety Helmet otherwise put NA NA - Shock absorption, Penetration resistant, flammability resistant, electrical resistant, water resistant and heat resistant features to be available with Safety Helmet Yes - Logo as per requirements of Buyer shall be provided on Safety Helmet Yes - Name of the brand and Manufacturer of Safety Helmet ACME, ACME Plastic & Safety Industries - 2/10 Class of Filtering Half Mask FFP3(Solid Particles only) FFP1(Against Solid Particles only), FFP2(Solid Particles only), FFP2(Both solid and Liquid Particles), FFP3(Solid Particles only), FFP3(Both solid and Liquid Particles), EN 149, N 95(NIOSH), N 99(NIOSH) Half Filtering Mask to be reusable Yes - Construction of Half Filtering Mask inseparable main filter with adjustable replaceable pre filter - Availability of Valve in Half Filtering Mask With both inhalation and exhalation valave With both inhalation and exhalation valave No of valves in Half Filtering Mask 1 1 No of layers in the Half Filtering Mask 4 - Fold ability of Half Filtering Mask Yes - Adjustable Nose Pin provided in Half Filtering Mask Yes - Head Harness in Half Filtering Mask Adjustable Adjustable The carbon filter provided should be with excellent absorbency in Half Filtering Mask Yes - The head harness shall be so designed that the filtering half Mask can be donned and removed easily Yes - The head harness shall be adjustable or self adjusting and shall hold the Half filtering Mask firmly and comfortably in position Yes - The Half filtering Mask should have good performance and breathability Yes - 3/10 No of Half Filtering Mask included in the kit 1 - Name of the make of Half Filtering Mask included in the Kit ABRIGO, Shaktam Health Care Product - Confirmity to standards for Saftey Boot Provided in the Kit IS 5557-2004 with latest amndmnt. IS 5557-2004 with latest amndmnt. Material of the safety boot Rubber Rubber Type of the Safety Boot Ankle boots rubber variety 3 type 1 non oil resistant (IS 5557) Ankle boots rubber variety 3 type 1 non oil resistant (IS 5557) Safety Ankle Boots supply shall be with Fabric Lining Yes - The Sole and Heel of the Saftey Ankle Boots shall be of Anti slip design Yes - Suitability for Ankle Boots Genderwise As per buyer requirement - Availability of Protective Steel Toe Cap type 2 conforming to IS 5852 for Saftey Ankle Boots Yes - No of Pairs of Safety Ankle Boot included in the Kit 1 - Name of brand and Manufacturer of Industrial Boot included in the kit BRW. Bhagwati Rubber Works, Kolkata - Type of construction of safety gloves Knitted - Clothing material of safety rubber gloves should be etching proof Yes - Cut protection level of Safety Gloves as per EN 388 3 - Safety Gloves should have Mechanical protection Feature Yes - Safety Gloves should have Impact Cut resistance Feature Yes - 4/10 Safety Gloves should provide solid wet and dry grip and good oil grip Yes - Comfort level of Safety Gloves Extremely light weight for effortless wear - Name of brand and Manufacturer of safety gloves included in the kit SGC, J & YOUNG (S- TECHO) - Details of HIGH GLOW RETROREFLECTIVE MATERIAL to be used in safety jacket Micro prismatic material of 50 mm wide Band of new material conforming to EN 471-2003 + A1:2007 shall be used. The supply shall confirm to the requirements of Level 2 of separate performance material confirming to Table 4 of EN471:2003 +A1:2007 - Provision of logo on the safety jacket as per the requirements of buyer Yes - The Garment of safety jackets shall provide 360 degree visibility Yes - Availability of Front two side Pocket in safety jacket Yes - Warranty of safety Kit in years 1 - Bag of Standard Quality made from Canvas Cloth/jute with good quality Zip along with logo and remarks as required by buyer Yes - Dimensions of Bag in mm x mm xmm ( length x width x height )which shall ensure proper packing of items of tool kit to be indicated 350x120x480 - Dimensional Parameters Size of Safety Helmet in mm Asorted Sizes of 520, 53 0, 540, 550, 560, 570, 580, 590, and 600 as per buyer requirement Asorted Sizes of 520, and 600 as per buyer requirement Color of Safety Helmet Yellow Color (UV - 5/10 Resistant ) Weight of Safety Helmet in grams 300 - Weight of the half filtering mask provided in the kit in gms 0.75 - Color of the filtering mask included in the kit Yellow - Color of the Safety Ankle Boot Black - Number Size of The Safety Boot offered in the kit Assorted Sizes of 6, 7, 8, 9, and 10 as per Buyer Requirement Assorted Sizes of 6, and 10 as per Buyer Requirement Leg Height of Safety Boot in mm 75 - Number Size of Safety Gloves Assorted Sizes of 6, 10 as per Buyer Requirement Assorted Sizes of 6, 10 as per Buyer Requirement Color of Front Side of Safety Gloves Grey Black, Grey, White, Yello w, Blue, Red Color of Back Side of Safety Gloves Black Black, Red Size of Safety Jacket Large ( Suitable for person of height 169-175 cm, chest girth 108-112 cms, Waist Girth 87-91 cms ) Small ( Suitable for person of height 152-160 cm, chest girth 96-102 cms, Waist Girth 76-81 cms ), Medium ( Suitable for person of height 161-168 cm, chest girth 103-107 cms, Waist Girth 82-86 cms ), Large ( Suitable for person of height 169-175 cm, Waist Girth 87-91 cms ), Extra Large ( Suitable for person of height 176-183 cm, chest girth 113-117 cms, Waist Girth 92-97 cms ) Color of Safety Jacket Flourescent orange-red (for Essential Service ) - Size of Pocket of safety jacket in mm x mm 125 x 125 125 x 125, 100 x 100 Material Parameters Material of Safety Helmet Shell HDPE ( High Density Polyethene) HDPE ( High Density Polyethene) 6/10 Material of Harness for Safety Helmet consisting of head band, anti concussion tape, etc shall be sweat resistant, non irritant and shall not cause any skin disease Yes - Material of the Strap of Safety Helmet Synthetic - Material of Filtering Mask Elastomeric Elastomeric Clothing material of Safety Gloves Spandex Spandex Coating Material of Safety Gloves Latex - Coating Area of Safety Gloves Palm and Fingers - The overall blend composition of Safety Jacket as per IS : 3416:1988 Polyester 65 +/- 3 % and Cotton 35% - Width of Retro Reflective Tape of Safety Jackets Micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material.The retro reflective material should be certified by the manufacturer to withstand 75 wash cycles @ 60 degree C and for Temperature Variation test. Micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material.The retro reflective material should be certified by the manufacturer to withstand 75 wash cycles @ 60 degree C and for Temperature Variation test. Width of the retro reflective tape for Safety Jacket 50 mm - Number of horizontal and vertical reflective tape for Safety Jacket 2 horizontal, 2 vertical - Sewing Thread in Safety Jackets 100% Spun Polyester 3 ply sewing thread of matching colour of best trade quality shall be used for stitching. 100% Spun Polyester 3 ply sewing thread of matching colour of best trade quality shall be used for stitching. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 7/10 1 Ashok Chaurasia 491226, new collectorate, composite building, seoni, room no 73-74, Labour office, Balod, Durg, 491226 4500 15 2 Ram Kishor Kanojiya 492008, Ambikapur, AMBIKAPUR (SARGUJA), 492008 4500 15 3 FATTE SINGH PARTE 493773, labour office collectorate building, rudri road, DHAMTARI, 493773 4500 15 4 Durgawati Sahu 497229, labour office mahuapara chowk ketka road, SURAJPUR, 497229 3000 15 5 Shraddha Verma 491001, assistant labour commissioner pt. ravi shankar shukla stadium near manas bhavan 10500 15 6 Rajkumar Nag 494449, labour office new collectorate building, DANTEWADA, 494449 1500 15 7 Vishesh Kumar Vyas 495001, assistant labour commissioner office 1st floor collectorate new composite building, BILASPUR, 495001 10500 15 8 Bhavana Dewangan 495677, assistant labour commissioner office tahsil road rampur iti chowk, KORBA, 495677 6000 15 9 PRIKSHIT KUMAR 491441, labour office hall no 2 composite building, collectorate, RAJNANDGAON, 491441 9000 15 10 MAHIP YADAV 493332, labour officer room no 117 collectorate, BALODABAZAR-BHATAPARA, 493332 6000 15 11 Mukesh Kumar 494444, BIJAPUR, 494444 1500 15 12 Devendra Kumar Rajput 492007, assistant labour commissioner (ALC) mahurkar gali near kutchehry chowk, Raipur(C.G), RAIPUR, 492007 10500 15 13 Sarita 495668, labour officer 9000 15 8/10 Chandrawanshi khokhara chowk, jail road, JANJGIR/CHAMPA, 495668 14 Siyaram Patel 493889, labour office bhteshwar nath chowk near gandhi maidan, GARIYABAND, 493889 3000 15 15 Mukesh Dewangan 494334, labour office room no 8, 2nd floor composite building collectorate, KANKER, 494334 4500 15 16 Suresh Kurrey 496331, labour office beside collectorate, JASHPUR, 496331 4500 15 17 Meenu Narayan Singh 496551, RAIGARH LABOUR OFFICE, Raigarh, 496551 7500 15 18 Namita John 494001, labour officer collectorate, BASTAR, 494001 4500 15 19 RAMMAN MANDHAVI 491335, labour office room no 81 new collectorate, BEMETARA, 491335 3000 15 20 Ramesh Kumar Kumeti 494661, NARAYANPUR, 494661 1500 15 21 Amar Singh Khande 494226, labour officer room collectorate, KONDAGAON, 494226 3000 15 22 Chet Ram Nanda 491995, labour office g. shyam nagar, KABIRDHAM (KAWARDHA), 491995 3000 15 23 Amit Kumar 493445, labour office Old collectorate building BTI Road, MAHASAMUND, 493445 6000 15 24 Mohammed Aslam Parvez Quadri 495334, labour office room no 252_3 new collectorate, MUNGELI, 495334 3000 15 25 Jagdish Neti 497119, labour office pathak kutir mission road infront of bjp office, BALRAMPUR, 497119 4500 15 9/10 26 Mukesh Kumar Rathore 497335, labour office collectorate building chhinddandh baikunthpur, KORIYA, 497335 4500 15 27 Deepti Kashyap 494111, Sanyukt Jila Karyalaya bhawan(Composite Building), Room No 41 District Sukma, 494111 1500 15

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 250 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 90 80-95 Tensile Index MD in Nm/g 50 * Tensile Index CD in Nm/g 30 * Opacity in % 86 * Tear Index (Avg) in Nm.m²/g 6 * 1/2 Smoothness for both sides (Bendtsen) in ml/min 200 * Thickness in µm 100 * Moisture in % 4.5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A 12A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunita Gupta 134109, c-6, sector 6, panchkula 250 15

Desktops

sofas

Public place seating chair Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 10 Year (s) Public Place Seating Chair ( 6 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Seating separate seat and backrest * Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 * Delivery status Knocked Down Supply to be assembeled by Consignee on site * Seat Cushion WITHOUT CUSHION * Backrest Cushion WITHOUT CUSHION * MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 1/4 Material of Seat and Backrest Mild Steel Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, Perforated MS sheet covered with 40 mm cushion cover. Material of Arms MS RECTANGULAR SECTION PIPE armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs MS RECTANGULAR SECTION PIPE cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel * Thickness of material of Main Frame in mm 1.8 * Thickness of material of Arms in mm 1.8 * Type of bolts M8 bolts * Thickness of PU Foam for Seat and Backrest ±2(mm) N.A * Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A * Covering Material for Seat and Backrest NA * DIMENSION Overall Length in mm (±10 mm) 1655 * Overall Depth in mm ( ±5 mm) 550 * Overall Height in mm (±5 mm) 760 * Seat Height from Floor in mm (±5 mm) 425 mm * 2/4 Thickness of material of Seat and Backrest (mm) 1.8 MM * CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) YES YES, NO COLOUR & FINISH Colour of Covering Material N.A * All M S Strucure Finish Powder Coated * Colour of Paint metallic gray * All steel component to be epoxy powder coated 50 micron thick * WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true * Adjuster for legs true * Arms Chrome Plated false * Legs Chrome Plated false * Cushion on Arms false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prakesh Chandra 800014, Bihar Police Buildings Constructions Corporation Pvt. Ltd, Kautilya Nagar, Patna 6 15

Modular Compact Storage Unit Modular Compact Storage Unit ( 27 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Number of Shelves one one MODE OF Supply Assembled Ready to Use Assembled Ready to Use MATERIAL Modular compact storage unit top 25 Mm Thickness Three Layer Pre-Laminated Particle Boards Of Grade-II Type II Of IS:12823 Latest 25 Mm Thickness Three Layer Pre-Laminated Particle Boards Of Grade-II Type II Of IS:12823 Latest Material for sides, bo ttom, shelf, shutter of the storage unit 18 Mm Thick Three Layers Pre-Laminated both side Particle Boards Matching With Top Shade In Grade-II Type-III Of IS:12823/Latest 18 Mm Thick Three Layers Pre-Laminated both side Particle Boards Matching With Top Shade In Grade-II Type-III Of IS:12823/Latest Material of pedestal back 12 Mm Thick Prelaminated Particle Board 12 Mm Thick Prelaminated Particle Board DIMENSION Width of compact storage unit(+/- 10 MM) 800 MM * Depth of compact storage unit (+/- 10 450 MM * 1/4 MM) Height of compact storage unit (+/- 10 MM) 1200 mm 1200 mm COLOUR & FINISH Finish of two long side Laminate In Colour With Swede Finish 0.6-0.8 Mm Thickness Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 mm Thick On Other Side * Finish of sides, bottom, s helf, shutter of the storage unit To Be Edge Banded With 0.8 - 1.0 Mm Thick PVC Tape With The Help Of Hot Melt Glue * Finish shade of outer sides of top, sides & facia oak * CERTIFICATION Test reports to be furnished to buyer on demand YES * MISC Frame Type free standing * Fixing of top with sides and bottom/skirting using mini fix and wooden dowel by using (knock down) system for interconnecting * Gable end having a recess groove to accomodate 8 mm MDF board panel * Mini fix/dowel gap/wrap age numbers can be modified * Skirting To be provided of 75 mm * Buffer Provided Adequate Number At The Bottom * Number of doors two openable doors of equal width * Fixing of doors to be hung on side of the storage unit with the help of hinges. * Tower bolt fixing Two Number S.S. Tower Bolt Of 75-100 mm On Other Door * Modular compact storage unit two long sides Have Post form half round profile * 2/4 Number of hinges lock multipurpose round lock * Finish of two Plain sides have edge banded with PVC tape of 2 mm thick with help of hot melt glue * WARRANTY Warranty period in number of years 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anis Ayub Shaikh 421601, Asangaon road, Shahapur 27 15

Modular Table

Executive Table

Printer

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Average Turn Over of Last 3 Years 18 Lakh (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 65 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA * Class confirming to IS:12402 (For Public Dustbins) NA * Material Corrosion free sheet metal Corrosion free sheet metal CAPACITY Bin Capacity (Volume) (Ltrs) 1100 Litres 1100 Litres DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) 200*50 * Weight of Dustbin (Complete unit) 130000 * 1/3 (Grams) CONSTRUCTIONAL Colour green * Wheel Lock With * Load carrying Capacity (Kgs) 700 * Wall Non- Perforated * Lid hindged * Handle With * Wheel With * Wheel Material RUBBER WHEEL * Towage Provision yes * Gripping Provision Ventral * Plugged outlet for washing & draining With * UV Resistant no * Dust Bin stand without * No. of Compartments in the Bin single * CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes * Test report number NA * Test report date NA * Name and address of lab NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satyadev Tomar 110093, Central store, B-2 Blk. Nand Nagri 65 45

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Public (Mobile containers confirming IS: 12402) Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA - Class confirming to IS:12402 (For Public Dustbins) Type B (with 4 pivoting castors) - Material Corrosion free sheet metal HDPE, LDPE, LLDPE, Corrosion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining bin) CAPACITY Bin Capacity (Volume) (Ltrs) 1110 Litres As per GeM Catalogue. DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) 200 - Weight of Dustbin (Complete unit) (Grams) 150000 - 1/3 CONSTRUCTIONAL Colour other than green/blue - Wheel Lock With - Load carrying Capacity (Kgs) 110 - Wall Non- Perforated - Lid Swing type - Handle With - Wheel With - Wheel Material caster - Towage Provision yes - Gripping Provision Both Frontal &Ventral - Plugged outlet for washing & draining Without - UV Resistant no - Dust Bin stand without - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number 100-08012018-02 - Test report date 13/01/2018 - Name and address of lab Birasini Test House 20/6/5, site -IV, sahibabad Industrial Area, Ghaziabad-201010 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jyoti Meshram 481111, CMO NAGAR PARISHAD BAIHAR, BALAGHAT 481111 20 15

Tablet Based Biometric Attendance System

Steam Sterlizer Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 2 Year (s) Steam Sterlizer ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Construction Type of Steriliser VERTICAL CYLINDRICAL Steam Steriliser Pressure type, Steriliser Chamber size: 300 mm (Diameter) x 500 mm (Length), conforming to IS: 3829 (Part 3)/1985, reaffirmed 2001, with amendment 1 & 2, fitted with Silicon door gasket( expansion type).Electric load of the unit shall be 4 KW. VERTICAL CYLINDRICAL Steam Steriliser Pressure type, fitted with Silicon door gasket( expansion type).Electric load of the unit shall be 4 KW. Steam supply to Steriliser Direct Steam Operation from an external source Direct Steam Operation from an external source, From Built-in Steam Generator electrically heated using immersion heaters wired for operation on 3 phase 4 wire 400/440 V 50 Hz 1/5 AC supply [with immersion heaters having mineral filled sheathed heating elements conforming to IS: 4159/2002 duly BIS marked and complying with safety requirements as per IS : 302-2-201(1992)], Built-in electrically heated Steam Generator (made of SS 316 (AISI 316) with low water protection system), it should work with 3 phase 400/440 V 50 Hz AC supply Material: Steriliser parts; Chamber, Jacket, Door, Door Ring and shall be made of SS 304 SS 304, SS 316 or SS 316L Type of control Automatic: MICROPROCESSOR CONTROLLED, WITH PRESELECTED STERILISATION PROGRAMS (variable programs customisable as per Buyer’s requirement to deal with sterilisation and drying of wrapped/unwrapped loads at 121 & 134 degree C ) Automatic: MICROPROCESSOR CONTROLLED, WITH PRESELECTED STERILISATION PROGRAMS (variable programs customisable as per Buyer’s requirement to deal with sterilisation and drying of wrapped/unwrapped loads at 121 & 134 degree C ) CONSTRUCTION Instruction plate on Steam Steriliser advising user to use soft water for steam generation for long service life of Steam Steriliser YES * Whether a compatible water softener/reversed osmosis based system to feed water to the steam generator unit is to be supplied with the steriliser: Yes Yes, No Provision of Lock on Steriliser Chamber Manual Lock Manual Lock, Automatic Lock, 2/5 door: Manual and Automatic Locks, both Installation The site ready for installation equipped with water supply, electric connection cabling and drainage outlet shall be provided by Buyer. The Seller shall be responsible to carry out for installation of the offered Steam Steriliser unit on turnkey basis i.e. Any civil work required for installation of the ordered equipment i.e. flooring tilling/plastering/Paint and/or wood work shall be Seller’s responsibility. The Seller shall also provide training to personnel of buyer. * Type of Door: Hinged type Hinged type Display facility for Sterilisation Cycle parameters Low water indicator, Alarm indicator Chamber Temperature, Cycle number, Batch Number, Time and date, Alarm indicator, Low water indicator Print facility for record generation of dates, time, load, identification number and operating parameters (temperature and holding time etc): Yes, port given to connect an external Printer Unit Yes, port given to connect an external Printer Unit, Yes, by an inbuilt printer unit Warranty Period 3 3, 5 (or higher) No of Doors in Steriliser 1 1 Whether Type Test Certificate from a Govt/NABL/ILAC approved testing laboratory is available (If Yes, to be furnished by Seller to Buyer on demand) for the offered product? true true, false 3/5 Type of user friendly Interface (for microprocessor controlled Sterilizer) to specify parameters for running Sterilization cycle: NA Keyboard interface, Touch screen interface, NA Data Transfer facility through USB/RS232 port to computer/laptop on real time basis false true, false Air removal from Sterilisation chamber, after loading the steriliser, by on for more pressure/vacuums pulsing for proper steam penetration YES * Integrated Shredder Facility Integrated Shredder (for shredding the load in Sterilisation chamber) Not available Yes, with Microprocessor controlled, with Manually controlled Shredder unit, Not available Material: Shredder parts; SS 304 SS 304, SS 316 or SS 316L Power of Motor used for Shredding NA, no integrated Shredder unit offered Must be of >= 2 HP, >= 1000 RPM, 220 V, 50 HZ AC motor, and able to deal with shredding of bio medical waste land as per Steriliser capacity, NA, no integrated Shredder unit offered Accessories (made of SS 316) for loading/unloading and handling of Load Number of Rails: 0 0, 2 (or higher) Long Handle: 1 0, 1 Sterilisation Carriages 1 0, 1, 2 (or higher) Pull out Trays/Tanks 2 0, 2 Floor loading carts 2 0, 2 (or higher) Transfer carriages: 1 0, 2 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity 4/5 S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Mali 305404, GOVERNMENT COLLEGE, KEKRI, AJMER ROAD, KEKRI (AJMER) 2 15

Multimedia Projectors

Meeting Table

PA Speaker PA Speaker ( 9 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specifications Speaker Type Monitor Speaker Monitor Speaker Amplification Method Powered Speaker Passive Speaker, Powered Speaker If Powered, Amplifier Class Class AB * Configuration Two Way One Way, Two Way, Three Way, Four Way Number of Speakers 2 2 Frequency Response (Hz) 20-20, 000 Hz * Low Frequency Unit with Size in Inches Main Unit : 40Hz – 200H * High Frequency Unit with Size in inches Satellite : 200Hz – 20KH * Sound Pressure Level (SPL) (1W/1m) (dB) 15 * Coverage Pattern Laptop, Desktop, TV * Maximum Level Sound Pressure Level (dB) 15 * 1/3 Nominal Impedance (Ohm) 4 * Speaker Port Ported * Side Handles No * Connectors RCA Pin * Enclosure Plywood Sheet * Mounting Wall Mount * LED Indicators Yes * BIS Registration Number under CRS of Meity for Powered Speaker - * Dimensions (H x W x D) (mm x mm x mm) - * Weight (Kg) 3.5 * Power Rating (Watt) 40 * AC Power Input 230V ~ 50/60 Hz * Warranty (Years) 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 9 15

Multifunction Machines

Printer or photo Copier Paper Experience with Gov. Required 5 Year (s) Printer Or Photo Copier Paper ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297 Size of the Paper A4 A4 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 80 Tensile Index MD in Nm/g 40 - Tensile Index CD in Nm/g 25 - Opacity in % 85 - Tear Index (Avg) in Nm.m²/g 4.5 - Smoothness for both sides (Bendtsen) in 250 - 1/3 ml/min Thickness in µm 95 - Moisture in % 4 - Stiffness MD 2 - Stiffness CD 1 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rahul Dattatray Nadkarni 400032, Agriculture & ADF Department, Mantralaya, Madam Cama Road, Hutatma Rajguru Chowk 500 15

Steel tables Steel Tables ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest false * Storage both side one side, both side Total Number of Storage Units five storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units one * Type of Storage Units Fig 1A of IS 8126 * Lock on all storage units Provided * Loading capacity of table top in KG ( ±5 Kg) 700 kg * Table Top Material and Thickness (±2 mm) 18 mm thick prelaminated Particle Board (Not as per IS 8126) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 1/4 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board, 25 mm thick MDF Board. Padestal (Under structure) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1660 1660.0 Table Top Width ±10(mm) 900 900.0 Table Height ±5(mm) 735 710, 735, 760, 800, 840, 850, 860, 750 MATERIAL Foot Rest Material N.A * Handles Material Plastic (Not as per IS 8126) * Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 2.0 mm * Storage Unit and Drawer Units Material 0.6 mm M S Sheet (Not as per IS 8126) 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s sheet, 1.2 mm m s sheet, 0.5 mm m s sheet Shoes Material nylon * DIMENSION Width of Storage Unit 450 * 2/4 ±5(mm) Depth of Storage Unit ±10(mm) 600 355, 600, 650, 700, 725, 575 Overall Height of Storage Units ±10 mm 560 mm * Height of smallest Storage Compartment Drawer ±3 mm 175 mm * Height of medium size Storage Compartment Drawer ±5 mm SAME AS SMALLEST * Height of Largest Storage Compartment Drawer ±5 mm SAME AS MEDIUM * Width of Locker Cupboard type Storage unit 450 mm 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit 600 mm 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit 380 mm * MISC Foot Rest Provided NO * COLOUR & FINISH Colour of Lamination AS PER BUYER CHOICE * Paint Powder coated * Colour of Paint AS PER BUYER CHOICE * CERTIFICATION ISI Marked false true, false BIS Licence No - * Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO WARANTEE WARANTEE PERIOD IN NUMBER OF 1 1, 2, 3, 4, 5 3/4 YEARS * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 2 15

sofas

Notebook Computers-laptop

Steel Bookcases

distribution or control board enclosures ( Distribution board for MCBs) ( PAC Only ), Molded Case Circuit Breakers (MCCB) ( PAC Only ), Molded Case Circuit Breakers (MCCB) ( PAC Only ) Distribution Or Control Board Enclosures ( Distribution Board For MCBs) ( 2 ) ( Under PAC ) Make l&t Model l&tsmdb-tn630dog250a8ways Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Reference BIS Specification:13032 yes * Suitable to accommodates specified Number of poles (number) Three Pole MCBs as out going and FP MCB with 3 Protected pole as incoming Single Pole MCBs as outgoing and Double pole MCB as incoming, Single Pole MCBs as out going and FP MCB with 3 Protected pole as incoming, Three Pole MCBs as out going and FP MCB with 3 Protected pole as incoming No. of Ways (in Number) 8 4, 6, 8, 10, 12, 16, 18, 24, 36 1/7 Metalic cover Type MCBs are accessible only after opening of top cover (Double door) MCBs are operable manually without opening of cover (Single door), MCBs are accessible only after opening of top cover (Double door) Enclosure category (Degree of Protection) IP-43 IP-20, IP-43 CONSTRUCTIONAL MCB distribution board for indoor installation yes * Copper Bus bar Rating (ampere) 100 Amp. * Minimum Sheet Thickness properly pretreated and stove enameled/Powder Coated (mm) 1.6 mm * Steel Mounting Rail Top Hat as per IS:11039/83 (35mmX7.5mm) Yes * Earth bar Yes * Neutral bar Yes * CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab to prove conformity to the specification. Yes * Type Test Certificate No. T-2255 Mechanical Testing * Type Test Certificate date 07/06/2016 * Name of Lab NABL * Address of Lab SURAT, GUJARAT * Test Report to be furnished to the buyer on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. 2 15 2/7 (C.G.) Molded Case Circuit Breakers (MCCB) ( 9 ) ( Under PAC ) Make l&t Model l&tmccb63a Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification as per IS/IEC:60947 part-2:2003 latest YES * ISI marked YES YES, NO If ISI Marked 'Yes' declare CM/L Number If 'NO' write NA - * Rated Current (in Ampere) 63A * No of poles/Protected poles(PP) 3 Pole 1 Pole, 2 Pole, 3 Pole, 4 Pole Rated Short circuit capacity (in KA) MCCB with RSCB capacity 10/16 KA tripping range MCCB with RSCB capacity 10/16 KA tripping range, MCCB with RSCB capacity of 10/16/25/35 KA tripping range Breaking current (in KA) 16 KA 10 KA, 16 KA, 25 KA, 35 KA Rated Voltage 240/415 Volt 50 Hz AC 240 Volt 50 Hz AC, 240/415 Volt 50 Hz AC CERTIFICATIONS Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report Number (Must declare) - * Test Report Date (Must declare) - * Name of Lab (Must - * 3/7 declare) Address of Test Lab (Must declare) - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 9 15 Molded Case Circuit Breakers (MCCB) ( 2 ) ( Under PAC ) Make l&t Model l&tmccb200a Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification as per IS/IEC:60947 part-2:2003 latest YES * ISI marked NO YES, NO If ISI Marked 'Yes' declare CM/L Number If 'NO' write NA - * Rated Current (in Ampere) 200A 200A No of poles/Protected poles(PP) 3 Pole 1 Pole, 4 Pole Rated Short circuit capacity (in KA) MCCB with RSCB capacity of 10/16/25/35 KA tripping range MCCB with RSCB capacity 10/16 KA tripping range, MCCB with RSCB capacity of 10/16/25/35 KA tripping range Breaking current (in KA) 25 KA 25 KA Rated Voltage 240/415 Volt 50 Hz AC 240 Volt 50 Hz AC, 240/415 Volt 50 Hz AC 4/7 CERTIFICATIONS Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report Number (Must declare) - * Test Report Date (Must declare) - * Name of Lab (Must declare) - * Address of Test Lab (Must declare) - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 2 15 Molded Case Circuit Breakers (MCCB) ( 7 ) ( Under PAC ) Make l&t Model l&tmccb32adn0-100d Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing Indian Standard specification as per IS/IEC:60947 part-2:2003 latest YES * ISI marked NO YES, NO If ISI Marked 'Yes' declare CM/L Number If 'NO' write NA - * Rated Current (in Ampere) 32A * 5/7 No of poles/Protected poles(PP) 3 Pole 1 Pole, MCCB with RSCB capacity of 10/16/25/35 KA tripping range Breaking current (in KA) 35 KA 35 KA Rated Voltage 240/415 Volt 50 Hz AC 240 Volt 50 Hz AC, 240/415 Volt 50 Hz AC CERTIFICATIONS Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES * Test Report Number (Must declare) - * Test Report Date (Must declare) - * Name of Lab (Must declare) - * Address of Test Lab (Must declare) - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 7 15

plastic moulded chair Plastic Moulded Chair ( 230 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material PVC (Polyvinyl Chloride) FILLED THERMOPLASTIC, UNFILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLASTIC, 1/4 POLYPROPELENE, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 570 * Seat Depth in mm (+/- 5 mm) 560 * Chair Height in mm (+/- 10 mm) 890 * Chair Dimensions Not Conforming To IS 3663 Latest * Weight of Chair (IN Grams) 3500 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 more than 50 % Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand NO * MISC Colour Dark Brown * Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajvir Singh 335804, Govt. college suratgarh 230 15

Drinking Water Cooler

plastic moulded chair Experience with Gov. Required 2 Year (s) Plastic Moulded Chair ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion Without With, Without Conformity to Indian Standard IS 13713- Latest false * Plastic Material FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl FILLED THERMOPLASTIC, FILLED THERMOSETTING PLASTIC, UNFILLED THERMOSETTING 1/4 Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) PLASTIC, PVC (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS Without arms With arms, Without arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 425 * Seat Depth in mm (+/- 5 mm) 470 * Chair Height in mm (+/- 10 mm) 805 * Chair Dimensions Not Conforming To IS 3663 Latest * Weight of Chair (IN Grams) 250 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 75, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gsm, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A * PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) * Strength of the Chair Conforming To IS 5416 (Part 1) * Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% * UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table Complied Minimum 50% tensile strength retained after exposure as per test * 2/4 1- Cycle Number 2 is more than 50 % Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand NO * MISC Colour Ash Gray, Steel Gray, Dark Gray, Green, Olive Green, Brown, Dark Brown, White, Off White, Blue, RED, YELLOW, PINK, UMBER GOLD, Black * Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's * WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lalita Jain 325205, Govt. Girls College Baran Baran Rajasthan 200 15

Notebook Computers-laptop